N-Scale 05/2023: Fleischmann bargains
[nbsp]
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL [&] UPS without delays.
[nbsp]
309.90 EUR
(RRP*)
259.99 EUR*
Art.-no. Fleischmann_707088
Fleischmann
Steam locomotive type Pt 2/3 of the Royal Bavarian State Railways.
- The model is factory-equipped with a permanently soldered digital decoder
- Black/green livery with decorative stripes
- Driver's cab rear with transition door
- Die-cast metal housing
- Numerous free-standing handlebars and separately attached parts
The class Pt 2/3 was a conspicuous phenomenon among the light tank locomotives for passenger service. Its slender boiler, the large distance between the running axle and the coupled wheels (4000 mm!) and the relatively large driver's cab are its typical features. In addition, a door was built into the back of the locomotive through which the stoker entered the train to take over the duties of the conductor. The Bavarian State Railway put the first locomotives into service in 1909 and the last in 1916. Krauss in Munich supplied all machines (type 1 B h2, top speed 65 km/h).
Additional prototype information:
Built in 1912 by Krauss & Co, Munich, serial no. 6637
Acceptance in 1912 as 6068 K.bay.Sts.B.
First depot: Rosenheim
August 31, 1924: New number 70 068
In 1945 the locomotive remained with the RBD Munich (Bw Rosenheim)
1950s: Main locomotive on the Prien-Aschau route
Retired: 08/10/1957 (Rosenheim depot)
Lok was stationed in Rosenheim all his life.
Model as it looked around 1914
- The model is factory-equipped with a permanently soldered digital decoder
- Black/green livery with decorative stripes
- Driver's cab rear with transition door
- Die-cast metal housing
- Numerous free-standing handlebars and separately attached parts
The class Pt 2/3 was a conspicuous phenomenon among the light tank locomotives for passenger service. Its slender boiler, the large distance between the running axle and the coupled wheels (4000 mm!) and the relatively large driver's cab are its typical features. In addition, a door was built into the back of the locomotive through which the stoker entered the train to take over the duties of the conductor. The Bavarian State Railway put the first locomotives into service in 1909 and the last in 1916. Krauss in Munich supplied all machines (type 1 B h2, top speed 65 km/h).
Additional prototype information:
Built in 1912 by Krauss & Co, Munich, serial no. 6637
Acceptance in 1912 as 6068 K.bay.Sts.B.
First depot: Rosenheim
August 31, 1924: New number 70 068
In 1945 the locomotive remained with the RBD Munich (Bw Rosenheim)
1950s: Main locomotive on the Prien-Aschau route
Retired: 08/10/1957 (Rosenheim depot)
Lok was stationed in Rosenheim all his life.
Model as it looked around 1914
216.90 EUR
(RRP*)
169.99 EUR*
Art.-no. Fleischmann_732101
Fleischmann
Electric locomotive 1616 of the Deutsche Bahn (DB Cargo Nederland).
New construction in 2021!
¦ With baptismal name Oldenzaal
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
With the merger of Dutch freight transport with the German Railion Group, DB AG gained access to part of the NS series 1600 electric locomotives. In 2012 ten machines were painted traffic red as part of maintenance. At the initiative of some train drivers, the last three locomotives were pasted with farewell texts at the end of their service at DB Cargo NL in 2020.
New construction in 2021!
¦ With baptismal name Oldenzaal
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
With the merger of Dutch freight transport with the German Railion Group, DB AG gained access to part of the NS series 1600 electric locomotives. In 2012 ten machines were painted traffic red as part of maintenance. At the initiative of some train drivers, the last three locomotives were pasted with farewell texts at the end of their service at DB Cargo NL in 2020.
341.90 EUR
(RRP*)
249.99 EUR*
Art.-no. Fleischmann_732171
Fleischmann
Electric locomotive 1616 of the Deutsche Bahn (DB Cargo Nederland).
New construction in 2021!
¦ With baptismal name Oldenzaal
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
With the merger of Dutch freight transport with the German Railion Group, DB AG gained access to part of the NS series 1600 electric locomotives. In 2012 ten machines were painted traffic red as part of maintenance. At the initiative of some train drivers, the last three locomotives were pasted with farewell texts at the end of their service at DB Cargo NL in 2020.
New construction in 2021!
¦ With baptismal name Oldenzaal
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
With the merger of Dutch freight transport with the German Railion Group, DB AG gained access to part of the NS series 1600 electric locomotives. In 2012 ten machines were painted traffic red as part of maintenance. At the initiative of some train drivers, the last three locomotives were pasted with farewell texts at the end of their service at DB Cargo NL in 2020.
229.90 EUR
(RRP*)
169.99 EUR*
Art.-no. Fleischmann_7560016
Fleischmann
Electric locomotive 1116 181 of the Austrian Federal Railways.
- Cityjet design
- Current operating condition with black roof hood
- Licensed ÖBB model
- Z21 cab available
In 2019, the ÖBB started an upgrade program for the renewal of the double-decker trains (DOSTO). This means that around 100 cars will be optimized to modern Cityjet standards by 2023. The modernization includes, among other things, on-board WLAN, new seat covers, multi-purpose areas in each intermediate car with more space for bicycles, baby carriages and luggage, as well as newly furnished quiet zones. In May 2022, halfway through the ongoing DOSTO upgrade program, electric locomotive 1116 181 was painted in the Cityjet design. With this, ÖBB is setting an important example for attractive offers in public transport. The locomotive is not only used in front of the Cityjet trains, but also in regular passenger and freight traffic.
- Cityjet design
- Current operating condition with black roof hood
- Licensed ÖBB model
- Z21 cab available
In 2019, the ÖBB started an upgrade program for the renewal of the double-decker trains (DOSTO). This means that around 100 cars will be optimized to modern Cityjet standards by 2023. The modernization includes, among other things, on-board WLAN, new seat covers, multi-purpose areas in each intermediate car with more space for bicycles, baby carriages and luggage, as well as newly furnished quiet zones. In May 2022, halfway through the ongoing DOSTO upgrade program, electric locomotive 1116 181 was painted in the Cityjet design. With this, ÖBB is setting an important example for attractive offers in public transport. The locomotive is not only used in front of the Cityjet trains, but also in regular passenger and freight traffic.
84.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Fleischmann_825031
Fleischmann
Articulated double pocket wagon, type Sdggmrs/T2000, of the Ahaus-Alstätter Eisenbahn AG.
Loaded with two truck trailers from Winner
Loaded with two truck trailers from Winner
84.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Fleischmann_825032
Fleischmann
Articulated double pocket wagon, type Sdggmrs/T2000, of the Ahaus-Alstätter Eisenbahn AG.
Loaded with two truck trailers from Winner
Loaded with two truck trailers from Winner
84.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Fleischmann_825033
Fleischmann
Articulated double pocket wagon, type Sdggmrs/T2000, of the Ahaus-Alstätter Eisenbahn AG.
Loaded with two truck trailers from Winner
Loaded with two truck trailers from Winner
34.90 EUR
(RRP*)
24.99 EUR*
Art.-no. Fleischmann_825740
Fleischmann
Plug-in stake car, type Kbs 443, of the German Federal Railroad.
¦ Version with brakeman's platform and round buffers
Stake wagons are mainly intended for the transport of bulky goods. These include, for example, steel, wood, large machines and motor vehicles as well as prefabricated construction parts and heavy individual loads. They are also used to move soil and gravel.
¦ Version with brakeman's platform and round buffers
Stake wagons are mainly intended for the transport of bulky goods. These include, for example, steel, wood, large machines and motor vehicles as well as prefabricated construction parts and heavy individual loads. They are also used to move soil and gravel.
34.90 EUR
(RRP*)
24.99 EUR*
Art.-no. Fleischmann_825745
Fleischmann
Swing stake wagon, type Ks, of the Austrian Federal Railways.
¦ Version with brown chassis and round buffers
The stanchions attached to the sides of these wagons secure the load against slipping. They are ideally suited for the transport of wood, metal and iron goods, vehicles and machines.
¦ Version with brown chassis and round buffers
The stanchions attached to the sides of these wagons secure the load against slipping. They are ideally suited for the transport of wood, metal and iron goods, vehicles and machines.
39.90 EUR
(RRP*)
29.99 EUR*
Art.-no. Fleischmann_826709
Fleischmann
4-axle flat car, type Rmms, of the Italian State Railways.
¦ Carriages with type Y25 welded bogies
The wagons are suitable for transporting heavy rolled sections or steel plates. Vehicles and other bulky and heavy goods are also transported with it.
¦ Carriages with type Y25 welded bogies
The wagons are suitable for transporting heavy rolled sections or steel plates. Vehicles and other bulky and heavy goods are also transported with it.
92.90 EUR
(RRP*)
59.99 EUR*
Art.-no. Fleischmann_838322
Fleischmann
Two-piece set “Post / PTT” large sliding wall wagons of the Swiss Federal Railways.
¦ New labels for the Swiss Post
¦ Finely detailed execution
¦ With separately attached handle bars
¦ New labels for the Swiss Post
¦ Finely detailed execution
¦ With separately attached handle bars
85.90 EUR
(RRP*)
59.99 EUR*
Art.-no. Fleischmann_849006
Fleischmann
Car set with two dust silo cars, type Uacs-x, of the Deutsche Reichsbahn.
¦ With many attached plug-in parts, some in openwork design
¦ Suitable for block trains
The four-axle Uacs type container wagons are freight wagons for the transport of bulk and dust goods. The wagons are subdivided according to their transport goods: While the Uacs-x are loaded with industrial goods such as coal dust, the Uacs-y are used for the transport of food goods such as soda or flour. The large originals have a special epoxy resin coating on the inside and a pneumatic loosening device. Both types, the Uacs-x and the Uacs-y, have the same basic structure with UIC type Y 25 Cs bogies and a welded base. The trolleys are filled via filler lids on the container roof, which can be reached via catwalks. The trolleys are emptied by a compressed air system.
¦ With many attached plug-in parts, some in openwork design
¦ Suitable for block trains
The four-axle Uacs type container wagons are freight wagons for the transport of bulk and dust goods. The wagons are subdivided according to their transport goods: While the Uacs-x are loaded with industrial goods such as coal dust, the Uacs-y are used for the transport of food goods such as soda or flour. The large originals have a special epoxy resin coating on the inside and a pneumatic loosening device. Both types, the Uacs-x and the Uacs-y, have the same basic structure with UIC type Y 25 Cs bogies and a welded base. The trolleys are filled via filler lids on the container roof, which can be reached via catwalks. The trolleys are emptied by a compressed air system.
85.90 EUR
(RRP*)
59.99 EUR*
Art.-no. Fleischmann_849008
Fleischmann
Car set with two dust silo wagons, type Uacs, the GATX.
¦ With many attached plug-in parts, some in openwork design
¦ Suitable for block trains
The four-axle Uacs type container wagons are freight wagons for the transport of bulk and dust goods. The wagons are subdivided according to their transport goods: While the Uacs-x are loaded with industrial goods such as coal dust, the Uacs-y are used for the transport of food goods such as soda or flour. The large originals have a special epoxy resin coating on the inside and a pneumatic loosening device. Both types, the Uacs-x and the Uacs-y, have the same basic structure with UIC type Y 25 Cs bogies and a welded base. The trolleys are filled via filler lids on the container roof, which can be reached via catwalks. The trolleys are emptied by a compressed air system.
¦ With many attached plug-in parts, some in openwork design
¦ Suitable for block trains
The four-axle Uacs type container wagons are freight wagons for the transport of bulk and dust goods. The wagons are subdivided according to their transport goods: While the Uacs-x are loaded with industrial goods such as coal dust, the Uacs-y are used for the transport of food goods such as soda or flour. The large originals have a special epoxy resin coating on the inside and a pneumatic loosening device. Both types, the Uacs-x and the Uacs-y, have the same basic structure with UIC type Y 25 Cs bogies and a welded base. The trolleys are filled via filler lids on the container roof, which can be reached via catwalks. The trolleys are emptied by a compressed air system.
341.91 EUR*
Art.-no. Brawa_63109
Brawa
Model details:
- SBS 39 type pantograph;
- R 628 type main switch;
- with 8 sandboxes, indusi and extended roof;
- in the model for the first time with resistance brake (deviating picture)
- Equipped with sound from the factory
The BRAWA model of the electric locomotive E44 was voted "Model of the Year 2019" in the readers' choice of the eisenbahn magazin.
- SBS 39 type pantograph;
- R 628 type main switch;
- with 8 sandboxes, indusi and extended roof;
- in the model for the first time with resistance brake (deviating picture)
- Equipped with sound from the factory
The BRAWA model of the electric locomotive E44 was voted "Model of the Year 2019" in the readers' choice of the eisenbahn magazin.
24.99 EUR*
(0.21m², base price 119.00 EUR/m²)
Art.-no. Noch_60307
Noch
"Are you still plastering or creasing?"
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
24.99 EUR*
(0.21m², base price 119.00 EUR/m²)
Art.-no. Noch_60309
Noch
"Are you still plastering or creasing?"
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
24.99 EUR*
(0.21m², base price 119.00 EUR/m²)
Art.-no. Noch_60311
Noch
"Are you still plastering or creasing?"
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
Knitterfelsen® - THE original from Austria!
The Knitterfelsen® makes it easy to create super-realistic rock sections in no time at all. The photo-realistic rocks are printed on special paper, which is extremely stable and at the same time easy to wrinkle. When wrinkling just do not be afraid: the wilder and heavier you wrinkle, the finer the structures in the rock. And that looks really good!
The installation in the landscape is very easy. The wrinkled sheet of rock can easily be glued into the landscape with the NOCH Landscape Glue. The bow can easily be bent over the terrain.
The NOCH Knitterfelsen® is being developed in cooperation with the model making Atelier Andres Dietrich in Austria. He invented the original Knitterfelsen a few years ago and has registered this as a trademark.
Advantages of the crinkly rocks:
Easiest application for a super-realistic result
High quality, UV-resistant print with a matte finish
Sturdy special paper - edges do not break when wrinkled
19.99 EUR*
(1400g, base price 14.28 EUR/kg)
Art.-no. Proses_PBAL-N-01
Proses
Packaging unit: 1.4 kg
19.99 EUR*
(1400g, base price 14.28 EUR/kg)
Art.-no. Proses_PBAL-N-02
Proses
Packaging unit: 1.4 kg
19.99 EUR*
(1400g, base price 14.28 EUR/kg)
Art.-no. Proses_PBAL-N-03
Proses
Packaging unit: 1.4 kg
[nbsp]
Yours sincerely
Daniel Mrugalski
DM-Toys
[nbsp]