N-Scale 12/2022: The mining facility
Modellbahn Union novelties: The mining facility!
[nbsp]
Dear customer,
at the end of the year we have another great novelty for you: a mining facility with winding tower, suspension bench and machine house in tried and tested Modellbahn Union Lasercut quality.
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL [&] UPS without delays.
[nbsp]
79.99 EUR*
Art.-no. MU_N-i00066
Modellbahn Union
Hanging bench is an old mining term. In pre-industrial mining, after the transition to underground mining, ore was hauled to the surface from simple winch shafts. Baskets, barrels or buckets made of wood were used as conveyor vessels. These were "attached" to the hoisting cable underground and set down above ground in order to "knock them off" the cable again. The hanging bench with its winding tower is inspired by those in the former Zollern and Minister Achenbach colliery. The steel and brick design of the hanging bench is typical of architecture around 1900. The model has three unloading points located under the building. The building itself stands on steel columns, giving the whole an open, non-solid appearance. With its airy steel construction, the winding tower is a typical example of a strut framework that can still be seen in many places. Our model has a movable sheave.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
39.99 EUR*
Art.-no. MU_N-i00067
Modellbahn Union
With its airy steel construction, the winding tower is a typical example of a strut framework that can still be seen in many places. Our model has a moveable sheave and can be used as part of a colliery or as an industrial monument on its own.
59.99 EUR*
Art.-no. MU_N-i00070
Modellbahn Union
Machine house for our winding tower (MU_N-i00066) in Art Nouveau style. The building is based on the machine house of the Zollern colliery and is a real eye-catcher with its steel construction and stained glass windows. The interior offers countless opportunities for extensive furnishing. It is possible to install a geared motor.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
29.99 EUR*
Art.-no. MU_N-i00071
Modellbahn Union
Set with base plate, geared motor and thread. With this set, the hanging bench (MU_N-i00066) and the machine house (MU_N-i00070) can be coupled and motorized.
49.99 EUR*
Art.-no. MU_N-B00078
Modellbahn Union
Model of a wagon tipper (or wagon tipper) type Gebauer. Waggon tipping systems are used to quickly unload O-wagons. The Gebauer wagon tipping system pulls the platform up on one side with steel cables. The freight wagon unloads at the front during the tipping process. The engines are in the prototype in the corrugated iron building which stands on a steel construction. On the unloading side there is a pit where the bulk material is collected.
In contrast to the prototype, the model's stage is raised from below by a servo motor included in the kit. The steel wires are therefore not shown in the N gauge model. The area around the tipper is lavishly engraved in a realistic cobblestone structure. The total height of the model is 118 mm including 33 mm installation depth. The model can be used from Era I to III.
The kit contains a servo motor with which the tilt function can be controlled. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832.
The wagon tipper is supplied complete with track profiles for the platform.
There is a video on YouTube about the function of the N gauge wagon tipping system.
In contrast to the prototype, the model's stage is raised from below by a servo motor included in the kit. The steel wires are therefore not shown in the N gauge model. The area around the tipper is lavishly engraved in a realistic cobblestone structure. The total height of the model is 118 mm including 33 mm installation depth. The model can be used from Era I to III.
The kit contains a servo motor with which the tilt function can be controlled. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832.
The wagon tipper is supplied complete with track profiles for the platform.
There is a video on YouTube about the function of the N gauge wagon tipping system.
49.99 EUR*
Art.-no. MU_N-G99300
Modellbahn Union
A steam excavator is an excavator powered by a steam engine. Steam excavators were built in the middle of the 19th century. They were the first powerful construction machines for earthmoving; It was through their use that many large construction projects of the industrialization era, such as the construction of canals, railway lines, open-cast mines and large industrial plants, were made possible. Steam excavators had their heyday at the end of the 19th and beginning of the 20th century. Our excavator is based on a model from the 1920s and was in use until the early 1970s.
Steam excavators were available in various designs, both in terms of the method of locomotion and the construction of the grave vessels: Due to the great weight, steam excavators were usually designed as rail vehicles (similar to a rail slewing crane) for movement. If the construction site was away from the fixed railway lines, which was usually the case, the tracks were laid "on the fly" especially for the excavator. Constructions on chains or wheels were less common.
The steam excavator or steam crane is an unpainted Finescale kit and comes complete with metal axles and buffers.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The model won the Golden Track 2021 in the TT / N / Z accessories category in the readers' choice of the MODELLEISENBAHNER and MIBA magazines.
Steam excavators were available in various designs, both in terms of the method of locomotion and the construction of the grave vessels: Due to the great weight, steam excavators were usually designed as rail vehicles (similar to a rail slewing crane) for movement. If the construction site was away from the fixed railway lines, which was usually the case, the tracks were laid "on the fly" especially for the excavator. Constructions on chains or wheels were less common.
The steam excavator or steam crane is an unpainted Finescale kit and comes complete with metal axles and buffers.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The model won the Golden Track 2021 in the TT / N / Z accessories category in the readers' choice of the MODELLEISENBAHNER and MIBA magazines.
14.99 EUR*
Art.-no. MU_N-A00097
Modellbahn Union
The Brown Boveri Compressor was used in mines to generate compressed air for powering the equipment under ground.Due to the high explosion risks usage of electrical equipment was forbidden. The compressors were usually situated ina purpose build compressor hall.
6.99 EUR*
Art.-no. MU_N-A00177
Modellbahn Union
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.
39.99 EUR*
Art.-no. MU_N-i00029
Modellbahn Union
Two-storey factory building with rail connection designed as a half relief. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is avoided. A straight version is available under the number N-i00030.
Built in the Wilhelminian style, the high-quality engraving and multi-layered structure make it a truly outstanding three-dimensional model for use as a background backdrop. Through the gate you can take a train behind the complex. This gives you the opportunity to design something special as an exit for trains on your layout instead of a conventional tunnel. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of the hall even with an inner life such. B. our workshop equipment or other machines on.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is avoided. A straight version is available under the number N-i00030.
Built in the Wilhelminian style, the high-quality engraving and multi-layered structure make it a truly outstanding three-dimensional model for use as a background backdrop. Through the gate you can take a train behind the complex. This gives you the opportunity to design something special as an exit for trains on your layout instead of a conventional tunnel. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of the hall even with an inner life such. B. our workshop equipment or other machines on.
24.99 EUR*
Art.-no. MU_N-i00030
Modellbahn Union
Two-story factory hall with siding connected as a straight half-relief. The building is part of our Johann Maschinenfabrik theme. The Wilhelminian-style building is a really outstanding, three-dimensional model for use as a background backdrop thanks to the high-quality engraving and the multi-layer structure. The kit contains a photo print that can be used as a background for the interior. You have the choice of sticking it directly behind the windows or on the back of the building. The latter then opens up the possibility of the hall with an interior such. B. to further design our workshop equipment or other machines.
39.99 EUR*
Art.-no. MU_N-i00031
Modellbahn Union
Model of a reception / administration building in a mixture of Wilhelminian architecture and Art Deco. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032.
The 3-storey building has printed realistic stained-glass windows replicas to enhance the effect of the building on the viewer. Reception and administration buildings of the factories were often very lavishly equipped so that the wealth of the companies was conveyed to the visitors. In our building, this is evident not only in the stained glass windows, but also in the plastered gables, the superb brick columns and the very detailed wrought-iron door. The Art Deco sconces (MU_N-A00300) can be attached to the pediment next to the ornate front door, but are not part of the kit.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032.
The 3-storey building has printed realistic stained-glass windows replicas to enhance the effect of the building on the viewer. Reception and administration buildings of the factories were often very lavishly equipped so that the wealth of the companies was conveyed to the visitors. In our building, this is evident not only in the stained glass windows, but also in the plastered gables, the superb brick columns and the very detailed wrought-iron door. The Art Deco sconces (MU_N-A00300) can be attached to the pediment next to the ornate front door, but are not part of the kit.
39.99 EUR*
Art.-no. MU_N-i00033
Modellbahn Union
Model of a machine hall with chimney, executed as a half relief. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032.
The machine hall with chimney is the heart of the factory. Here stood the steam engine (later diesel and electric motors), which supplied the plant with energy. Next to the machine hall is the boiler room, from which the chimney for the removal of the combustion gases protrudes. As was often the case with machine shops, large windows are installed to ensure that not only enough light enters the hall, but visitors can also see and admire the steam engines. The steam engines were often the pride of the company. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of further shaping the hall with an inner life. Likewise, a photo print with tiles for the bottom of the machine hall is included.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032.
The machine hall with chimney is the heart of the factory. Here stood the steam engine (later diesel and electric motors), which supplied the plant with energy. Next to the machine hall is the boiler room, from which the chimney for the removal of the combustion gases protrudes. As was often the case with machine shops, large windows are installed to ensure that not only enough light enters the hall, but visitors can also see and admire the steam engines. The steam engines were often the pride of the company. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of further shaping the hall with an inner life. Likewise, a photo print with tiles for the bottom of the machine hall is included.
39.99 EUR*
Art.-no. MU_N-i00054
Modellbahn Union
Large factory building in Wilhelminian style architecture. The building matches our "Maschinenfabrik Johann" series and is equipped with large windows, which makes any interior design clearly visible.
[nbsp]
Yours sincerely
Daniel Mrugalski
DM-Toys
[nbsp]