LokSound 5 micro single strands with loudspeaker

Art.-no.ESU_58813
Manufacturer, no.ESU 58813
CategoryControl
EAN4044645588130
109.99 EUR
Incl. 19% VAT., excl. shipping

Categories Decoder Control


LokSound 5 micro DCC / MM / SX / M4 "Empty decoder", single strand, retail, with speaker 11x15mm

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

Operating modes:
The LokSound 5 micro is also a true multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on fully automatically to a suitable digital central unit.

It masters all DCC programming modes and, thanks to RailCom®, the CV values on the main track can be read out with suitable control panels. For panels that can only program the CVs from 1-255, there are auxiliary registers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.

The M4 protocol allows automatic logon to mfx® compatible panels.

The LokSound 5 micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU brake commands or the Lenz® ABC system. Braking with DCC brake modules or DC voltage is also possible. He also stops with a Selectrix® brake diode. An automatic ABC shuttle allows automatic commuting between two stations.

The LokSound 5 micro decoder can be used on analog DC and AC tracks (!).

sound:
The LokSound 5 micro decoder can play up to 10 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is virtually no difference to the original more audible. A Class D audio power amplifier with up to 3W output powers the speakers, which may have between 4 ohms and 32 ohms impedance. The huge 128 Mbit sound storage provides enough capacity.

All individual sounds can be individually adjusted in volume. The superflexible Soundengine without rigid schedule allows the prototypical simulation of all imaginable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you the maximum control over your vehicles.

features:
Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs as well as a logic level output. There are two more logic level outputs on the Next18 interface, which can alternatively control RC servos. All important lighting functions are available. The brightness of each output can be set separately. The decoder controls the automatic on and off when decoupling for ROCO®, Krois® and Telex® couplings.

Motor control:
The engine control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency of 10kHz to 50kHz ensures especially in bell armature motors for a super quiet operation - The typical "humming" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the automatic decompression of the decoder to the motor. The LokSound 5 decoder delivers up to 0.75A motor current enough juice for all intended usage scenarios.

Technical specifications:
- Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®
- 32 functions switchable (depending on the control panel)
- 32-bit processor
- Digital Class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W)
- Each channel in 16-bit resolution and 31250 kHz sample rate
- Noise memory with 128 Mbit capacity
- Motor control with 50 kHz clock frequency
- RC servos and Susi modules can be controlled
- 3 new, individually adjustable brake controllers
- Two-stage heavy load simulation
- Updatable with ESU-LokProgrammer

LokSound 5 micro:
- Motor current 0.75 A.
- Depending on the interface up to 6 amplified function outputs for special functions (total: 9 outputs)
- Next18 interface as standard, adapter cables for other interfaces included
- Ex works with 11x15 mm "sugar cube" speakers with customizable sound capsule set
- RC servos and Susi modules can be controlled
- PowerPack storage capacitor optionally connectable
- Dimensions: 21mm x 10mm

interfaces:
- 8-pin NEM 652
- PluxX16
- 6-pin NEM 651
- Next18

CategoriesDecoder, Control
Published3/2019

This model is not a toy. Not suitable for children under 14 years!