Nano locomotive decoder PD06A for SX1 SX2 & DCC with strands

Product features and functions:
- For optional operation with conventional DC traction device, SelecTRIX 1 and 2 digital systems or NMRA standard (DCC)
- Switching between analog and digital mode is automatic
- In digital mode, the last programmed system is used (it will not switch automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- Load control of the latest generation, thus particularly soft control behavior
- Different control variants for optimum adaptation to the engine
- Internal 127 speed steps
- Adjustable motor frequency (16 kHz, 32 kHz)
Block mode operation with simple diodes in digital mode
- Light and function outputs dimmable and analog activated
- Shunting maneuver
- Motor, light and track connections electronically exchangeable
- All function outputs freely programmable
- Temperature protection
- Reset function for DCC and SX2
- Update capability of the decoder

The update (the firmware download from the Internet is free of charge) is possible on the track when the decoder is installed (no need to open the vehicle) and can be done either via the FCC digital control unit or the programmer. If no corresponding hardware is available, the company Doehler & Haass provides a programmer on loan.

The vehicle decoder PD06A supports bidirectional communication (locomotive feedback in DCC mode, RailCom®).

The vehicle decoder PD06A does not support SX1 programming. Set up SX1 operation with SX2 parameter programming.

The PD06A Vehicle Decoder for Miniature Engines is the new, ultra-small, miniature motor vehicle decoder for SX1, SX2 and DCC operation. There are a few minor limitations compared to our DH decoder series:

- No support of the operating mode MM
- No support for SX1 programming (SX1 operation is possible through SX2 parameter programming)
- No SUSI interface
- No low-frequency motor control (16 kHz or 32 kHz are selectable)
No extended function assignments (that is, no conditions, no initial mapping, etc.)
- No automatic coupling process
No brakes with asymmetrical digital voltage and no slow speed
- no brake ramp

Vehicle decoder for miniature motors 0.2 A / 6 V

Operating mode SX1, SX2, DCC, DC-analogue
Dimensions [mm] after publication
Total load 0.2 A
Motor voltage 6 V
Max. Motor current 0.2 A
Max. Driving voltage 18 V
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) each 300 mA