Shipping Destination
Shipping Destination
Language:
Decoder DH10C-1 NEM Schnittstelle DCC + Selectrix
Zoom: hover, original: click
Doehler & Haass DH10-1
Decoder DH10C-1 NEM Schnittstelle DCC + Selectrix
This product is currently not available!
Please note the successor product:
Decoder DH10C-1 2nd generation With ribbon cable for NEM 651 DCC + Selectrix.
Decoder DH10C-1 2nd generation With ribbon cable for NEM 651 DCC + Selectrix.
Beschreibung
It will always delivered the latest version with the latest software!
Product features and functions
- For optional operation with conventional DC traction device, digital systems according to SelecTRIX 1 and 2 or NMRA standard (DCC)
- Switching between analog and digital mode is automatic
- In digital mode the last programmed system is used (it will not switch automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- Load control of the latest generation, thus particularly soft control behavior
- Different control variants for optimum adaptation to the engine
- Internal 127 speed steps
- Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
Block operation with simple diodes in digital mode
- Light and function outputs dimmable and analog activated
- Shunting gear
- Engine, light and track connections electronically exchangeable
- All function outputs freely programmable
- Temperature protection
- Reset function for DCC and SX2
- Update capability of the decoder
The update (the firmware download from the Internet is free) is possible on the track when the decoder is installed (no need to open the vehicle) and can be done either via the FCC digital control unit or the programmer. If no corresponding hardware is available, the company Doehler & Haass will provide a programmer on loan.
The vehicle decoder DH10C supports braking with asymmetrical digital voltage (four diodes in series and one antiparallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive feedback in DCC operation, RailCom®).
For SX1 programming, remove a connected SUSI sound module. It is sufficient to interrupt the supply voltage (red wire) for the time of SX1 programming. SX2 or DCC programming is not affected.
Vehicle decoder 1.0 A:
Operating mode SX1, SX2, DCC, MM, DC-analogue
Dimensions [mm] 14.2 * 9.3 * 1.5
Total load 1.0 A
Max. Motor current 1.0 A
Max. Driving voltage 30 V
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) each 300 mA
AUX3, AUX4 unreinforced
with SUSI interface (if AUX3 / AUX4 deactivated)
The software, firmware and sound data download can be obtained from the Doehler & Haass website .
Product features and functions
- For optional operation with conventional DC traction device, digital systems according to SelecTRIX 1 and 2 or NMRA standard (DCC)
- Switching between analog and digital mode is automatic
- In digital mode the last programmed system is used (it will not switch automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- Load control of the latest generation, thus particularly soft control behavior
- Different control variants for optimum adaptation to the engine
- Internal 127 speed steps
- Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
Block operation with simple diodes in digital mode
- Light and function outputs dimmable and analog activated
- Shunting gear
- Engine, light and track connections electronically exchangeable
- All function outputs freely programmable
- Temperature protection
- Reset function for DCC and SX2
- Update capability of the decoder
The update (the firmware download from the Internet is free) is possible on the track when the decoder is installed (no need to open the vehicle) and can be done either via the FCC digital control unit or the programmer. If no corresponding hardware is available, the company Doehler & Haass will provide a programmer on loan.
The vehicle decoder DH10C supports braking with asymmetrical digital voltage (four diodes in series and one antiparallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive feedback in DCC operation, RailCom®).
For SX1 programming, remove a connected SUSI sound module. It is sufficient to interrupt the supply voltage (red wire) for the time of SX1 programming. SX2 or DCC programming is not affected.
Vehicle decoder 1.0 A:
Operating mode SX1, SX2, DCC, MM, DC-analogue
Dimensions [mm] 14.2 * 9.3 * 1.5
Total load 1.0 A
Max. Motor current 1.0 A
Max. Driving voltage 30 V
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) each 300 mA
AUX3, AUX4 unreinforced
with SUSI interface (if AUX3 / AUX4 deactivated)
The software, firmware and sound data download can be obtained from the Doehler & Haass website .