Realistsic Sound UNIVERSAL course & city

16 noises - 7 outputs - 7 light programs - 4 inputs for track contacts - Programmable - Digital compatible

Imagine the following scenario: A train approaches a railroad crossing. The horn of a diesel loco sounds. Then the chime works at the railroad crossing and the hazard warning lights flash. You can hear the train passing by. In the distance you can hear the chimes of a town hall and the barrel organ of a street musician. The train is over - the chime stops and the hazard lights stop flashing. It gets quiet - only in the distance you can hear different traffic sounds.

And the effort for this scenario? Very low. All you need is the Realistic Sound "Universal" 5770, two warning lights (no gear) and a track contact. If the track contact is run over, the horn of the diesel locomotive is triggered first and then the chime. The hazard warning lights are connected directly to the Realistic Sound module and controlled from there with the appropriate flashing frequency. The other noises can be triggered, for example, by the random generators integrated in the sound module. With additional inputs, sounds and outputs available, additional soundscapes and control functions can be programmed and called up by moving trains.

5770 Realistic Sound »UNIVERSAL« Train & City
16 sounds: Two different station announcements, moving train, train brakes, steam whistle, bell, horn (diesel locomotive), chime (railway crossing), church bells, town hall carillon, street musician, market crier, siren (fire alarm), siren, traffic and building site noise. 7 light programs: flashing lights, railroad crossing, city lights, billboard, traffic lights, blue lights, flares, construction site lightning. Delivery ready for use including 2 Lausprecherboxen.

Technical information:
Each Realistic Sound »UNIVERSAL« contains 16 different sounds. The sounds can be assigned to the two speakers as desired (stereo playback, loudspeakers freely placeable). A maximum of 4 sounds are available at the same time (2 per speaker). The sounds and functions are triggered by the buttons in the sound module, via the digital system keyboard, by 4 integrated random generators or via 4 contact inputs (direct connection of track or reed contacts etc. to the Realistic Sound). The modules also have 7 outputs for connecting incandescent lamps, etc. The 7 outputs can be switched on and off via keyboard or controlled by assignment to a sound or via the pre-programmed lighting programs.

Programming (via built-in keyboard): Sound Sequence: Each sound can be assigned a second sound, which will be played as soon as the first sound is finished. Sound speaker assignment (left, right or both speakers). Playback mode: Continuous sound (1. button press switches sound on, 2. button press again) or single or multiple run (by pressing the button the sound is played up to 15 times depending on the pre-programming and then ends automatically). Assignment Inputs: Selection of which sound should be triggered when switching a contact input. Assignment Outputs: Selection, which output should be switched on or which light program should run as long as a certain sound is triggered. Reset function: Resetting all programming to the factory settings. All programming remains permanently stored even without power supply. The sound module is prepared to be able to subsequently update the operating program and sounds.

Digital programming: The programming takes place via the usual registers and CV's in the digital system. In addition to the manually programmable functions, the following values can be changed: address, time base for the light programs / random number generator, sound code for sound update, decoder recognition for software update etc.

Specifications: 12-16V (AC), 14-22V (DC and digital). Digital data reception: NMRA-DCC, Märklin®. 2 sound outputs for speakers 8 ohms / 0.5 W (included). Connection via 3.5 mm jack plug, alternatively the connection of active loudspeaker boxes, stereo system, headphones etc. is possible. Separate volume control for both outputs. 7 light outputs 12-20 V (depending on input voltage) 300 mA per output, max. 1.0 A total (for connecting lamps etc.). 4 contact inputs 5-16 V or potential-free switch (to trigger the sounds of moving trains).

More information, instructions and sounds to listen to can be found on the Internet at www.busch-model.com.