N-Scale 08/2024: Swiss Week, Kato, Hobbytrain, Minitrix

189.90 EUR (RRP*)

159.99 EUR^*

Art.-no. Kato_10-1273

Kato

New company number 3506 Anna von Planta
Three-part electric multiple unit ABe 8/12 Allegra of the Rhaetian Railway (RhB), Epoch VI.
Close couplings and front lighting that changes in the direction of travel
Interior lighting (optional) with KATO standard kit.

Minimum radius: R150
Dimensions: length 330.23mm, height 25.8mm without pantograph, width 18mm (with mirror 20mm).
Prototype information: Since 2010, the modern Allegra multiple units have been running safely on the Rhaetian Railway network and chauffeuring commuters in the Chur agglomeration. The three-part dual-voltage multiple units run on direct and alternating current. The power system can even be changed while the train is moving, which means that the time-consuming change of locomotive in Pontresina is no longer necessary. The Allegra is powerful, elegant and comfortable at the same time and cuts a fine figure on any model landscape.

Due to the tighter radii in Japan, the train is coupled relatively far apart - but there is a separate set of couplings and bellows with a closer spacing. Article no.: 74032

264.69 EUR (RRP*)

159.99 EUR^*

Art.-no. Kato_7074075

Kato

The Allegra ABe 8/12 ABB!

The exclusive Allegra models in a limited edition. Since the collaboration between ABB and Stadler Rail began in 2002, Stadler Rail has ordered traction equipment from ABB for more than 1,500 regional trains and over 300 light rail vehicles. ABB Ltd (abbreviation for Asea Brown Boveri) is a leader in energy and automation technology with headquarters in Zurich. The Allegra multiple units are adorned with ABB advertising with different prints at irregular intervals. The railcars of the Allegra #3510 show urban high-rises, the middle car shows the Swiss mountain landscape.

Model features:
· Minimum drivable radius: R150
· Maximum gradient: 4%
· With two-current system 11kV, 16 2/3Hz AC
· Equipped with close couplings
· Changing front lighting in the direction of travel
· Interior lighting (optional) with KATO standard kit

228.99 EUR (RRP*)

149.99 EUR^*

Art.-no. Kato_7074076

Kato

The Allegra ABe 8/12 Arosa!

The exclusive Allegra models in a limited edition. The fantasy model train Allegra ABe 8/12 Arosa is designed in the style of the "Arosa Express" with the colors of the Chur-Arosa railway line and was produced specifically for NOCH for the 110th anniversary of "Chur-Arosa" 1914 - 2024. The eye-catching color scheme in a beautiful blue is particularly impressive. This design is completed with the colorful flowers and is a real eye-catcher for your model railway!

Model features:
· Minimum drivable radius: R150
· Maximum gradient: 4%
· With two-current system 11kV, 16 2/3Hz AC
· Equipped with close couplings
· Changing front lighting in the direction of travel
· Interior lighting (optional) with KATO standard kit

179.90 EUR (RRP*)

161.91 EUR^*

Art.-no. Kato_10-1891

Kato

RhB stake car Rw wood
4-piece wagon set including round wood load
Rw8375, 8378, 8379, 8380

The "Rw wood transport stake wagon" set contains 4 stake wagons including the wood load. These have the wagon numbers "Rw 8375, Rw 8378, Rw 8379, Rw 8380" printed on them.

Freight transport by rail is popular in Graubünden. After the first freight and container series in 2022, KATO is expanding the range with new containers, flat wagons and wood. The open, four-axle flat wagons of the Rhaetian Railway are known as all-rounders and are ideal for transporting round wood, containers, building materials, machinery and much more. railCare is a young company specializing in transport logistics that has been part of the Coop Group since 2010 and delivers goods door-to-door in an environmentally friendly way throughout Switzerland. With these new products and the freight products from KATO already available on the market, you have even more scope for your Swiss freight transport. Your train can now also be equipped with wood transport wagons and the new railCare containers.

Model features:
- Minimum drivable radius: R150
- Close couplings mounted; including Arnold couplings as replacement
- Compatible with freight wagons from the current KATO range
- Product photo is without stakes and NEM Arnold coupling which are included as accessories

179.90 EUR (RRP*)

161.91 EUR^*

Art.-no. Kato_10-1892

Kato

RhB stake car Rw with railCare container, 4-piece car set, with 8 containers
Rw8381, 8382, 8383, 8384


The set "Rw stake wagon with railCare container" contains 4 stake wagons and 8 railCare containers. The stake wagons have the wagon numbers "Rw 8381, Rw 8382, Rw 8383, Rw 8384" printed on them.

Freight transport by rail is popular in Graubünden. After the first freight and container series in 2022, KATO is expanding the range with new containers, flat wagons and wood. The open, four-axle flat wagons of the Rhaetian Railway are known as all-rounders and are ideal for transporting round wood, containers, building materials, machinery and much more. railCare is a young company specializing in transport logistics that has been part of the Coop Group since 2010 and delivers goods door-to-door in an environmentally friendly way throughout Switzerland. With these new products and the freight products from KATO already available on the market, you have even more scope for your Swiss freight transport. Your train can now also be equipped with wood transport wagons and the new railCare containers.

Model features:
- Minimum drivable radius: R150
- Close couplings mounted; including Arnold couplings as replacement
- Compatible with freight wagons from the current KATO range
- Product photo is without stakes and NEM Arnold coupling which are included as accessories

18.90 EUR (RRP*)

17.01 EUR^*

Art.-no. Kato_23-550

Kato

suitable for the Kato RhB stake cars

23.90 EUR (RRP*)

21.51 EUR^*

Art.-no. Kato_8203

Kato

RhB stake car 8385


Freight transport by rail is popular in Graubünden. After the first freight and container series in 2022, KATO is expanding the range with new containers, flat wagons and wood. The open, four-axle flat wagons of the Rhaetian Railway are known as all-rounders and are ideal for transporting round wood, containers, building materials, machinery and much more. railCare is a young company specializing in transport logistics that has been part of the Coop Group since 2010 and delivers goods door-to-door in an environmentally friendly way throughout Switzerland. With these new products and the freight products from KATO already available on the market, you have even more scope for your Swiss freight transport. Your train can now also be equipped with wood transport wagons and the new railCare containers.

Model features:
- Minimum drivable radius: R150
- Close couplings mounted; including Arnold couplings as replacement
- Compatible with freight wagons from the current KATO range
- Product photo is without stakes and NEM Arnold coupling which are included as accessories

329.00 EUR (RRP*)

199.99 EUR^*

Art.-no. Minitrix_16144

Minitrix

Prototype: German Federal Railroad (DB) standard electric locomotive 141 430-9. Orient red basic color scheme. Version with double lamps, fan grille of the Klatte type. State around 1987.

Highlights:
- Digital sound with many functions

Model: Housing and bracket made of die-cast zinc. Built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Attached handle bars.
The headlights change over with the direction of travel and work in analogue mode.
Length over the buffers 98 mm.

129.00 EUR (RRP*)

99.99 EUR^*

Art.-no. Minitrix_18201

Minitrix

Rail mail car of type a

Prototype: 2 type Post mr-a mail cars in the basic ocean blue / ivory paint scheme, operated by the German Federal Post Office. The car looks as it did in 1980.
Model: All of the cars have close coupler kinematics. Prepared for the subsequent installation of interior lighting. Total length over the buffers 330 mm.

The matching interior lighting: 66612 LED interior lighting.

57.99 EUR (RRP*)

44.99 EUR^*

Art.-no. Minitrix_18447

Minitrix

Prototype: 1 express train passenger car, 1st/2nd Czech Railways (#eské drahy #D) type Y/B class. Year of construction from 1968.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Length over buffers 153 mm.

The matching interior lighting: 66616 LED interior lighting.

Add-on car for the 15695 and 15696 passenger cars.

76.41 EUR^*

Art.-no. Hobbytrain_H23478

Hobbytrain

From mid-2002, SBB Cargo put a series of grain silo wagons of the Taggnpps 31 type into operation. Originally, the wagons were intended exclusively for the transport of sugar and were provided with corresponding side advertising. The raw material for one of the most important Swiss products is mainly delivered by rail, so the wagons are now increasingly being used to transport cocoa from Amsterdam to Switzerland. The eye-catching stainless steel wagons usually travel as block trains and then offer an impressive appearance.

Model features:
– Hand-applied industrial dirt
– for the first time with graffiti
– detailed design with numerous attached parts
– recommended minimum radius: 225 mm
– Length over buffers: 125mm

76.41 EUR^*

Art.-no. Hobbytrain_H23479

Hobbytrain

From mid-2002, SBB Cargo put a series of grain silo wagons of the Taggnpps 31 type into operation. Originally, the wagons were intended exclusively for the transport of sugar and were provided with corresponding side advertising. The raw material for one of the most important Swiss products is mainly delivered by rail, so the wagons are now increasingly being used to transport cocoa from Amsterdam to Switzerland. The eye-catching stainless steel wagons usually travel as block trains and then offer an impressive appearance.

Model features:
– Hand-applied industrial dirt
– for the first time with graffiti
– detailed design with numerous attached parts
– recommended minimum radius: 225 mm
– Length over buffers: 125mm

52.11 EUR^*

Art.-no. Hobbytrain_H25126

Hobbytrain

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

52.11 EUR^*

Art.-no. Hobbytrain_H25127

Hobbytrain

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

52.11 EUR^*

Art.-no. Hobbytrain_H25128

Hobbytrain

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

71.91 EUR^*

Art.-no. Hobbytrain_H25129

Hobbytrain

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

52.11 EUR^*

Art.-no. Hobbytrain_H25130

Hobbytrain

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

52.11 EUR^*

Art.-no. Hobbytrain_H25131

Hobbytrain

2. Company number

In Switzerland, the SBB's double-decker express train carriages, which were purchased from 1997 onwards, are known as IC2000. These passenger carriages, which are approved for 200 kilometres per hour, were originally purchased in five types (Bt, B, BR, A, AD), although some of them may differ slightly from one another. In addition, various changes have been made since delivery, so that there are now seven different types. They differ from other European double-decker carriages mainly in the gangway on the upper deck.

4.99 EUR^*

Art.-no. MU_N-A00001

Modellbahn Union

Simple and effective: the gravel aid from DM-Toys in 2 mm thick MDF (medium density fibreboard).
Lasercut Kit Dimensions: 50x24x29 mm (WxDxH). We recommend gluing the gravel aid together. When using the gravel aid, you should take care not to push it too much on the tracks, but only pull it backwards, otherwise the material could suffer.

The gravel aid is currently available in 2 versions. The gravel aid is offered for tracks without embankment (A00001) and for tracks with embankment (A00002). The ballast aid allows easy coding of code 80 and code 55 tracks.

4.99 EUR^*

Art.-no. MU_N-A00002

Modellbahn Union

Simple and effective: the gravel aid from DM-Toys in 2 mm thick MDF (medium density fibreboard).

Lasercut Kit Dimensions: 50x33x33 mm (WxDxH). Maximum height of the dam 5mm. We recommend gluing the gravel aid together. When using the gravel aid, you should take care not to push it too much on the tracks, but only pull it backwards, otherwise the material could suffer.

The gravel aid is currently available in 2 versions. The gravel aid is offered for tracks without embankment (A00001) and for tracks with embankment (A00002). The ballast aid allows easy coding of code 80 and code 55 tracks.

7.99 EUR^*

Art.-no. Noch_60822

Noch

The NOCH structural powder is extremely fine, so that structures can be applied to streets, squares, walls and other components. The powder is sprinkled evenly into the still wet grass glue using a sprinkler. After the grass glue has dried, the surface is painted over with NOCH road construction structural paint or NOCH acrylic paint, for example, and the surface is sealed with it. Our tried and tested road construction set will also be supplied with the new material in the future.

17.90 EUR^*

Art.-no. Lemke_LC4075

Lemke

With rotating axles and detailed printing.

17.91 EUR^*

Art.-no. Lemke_LC4074

Lemke

With rotating axles and detailed printing.

22.41 EUR^*

Art.-no. Lemke_LC4073

Lemke

MAN F90 container semitrailer with rotating axles, window insert and detailed printing