Largest N gauge range
All products available
Fast shipping
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 07/2024: Minitrix & Arnold novelties
[nbsp]
Dear customer,
a few Minitrix and Arnold novelties as well as the BR 70.0 from Fleischmann reached us this week.
[nbsp]
314.90 EUR
(RRP*)
283.41 EUR*
Art.-no. Fleischmann_7170010
Fleischmann
Steam locomotive series 70.0 (Bavarian Pt 2/3) of the Deutsche Bundesbahn.
- The model is factory-equipped with a permanently soldered digital decoder
- Finely detailed model with rocker bearing chassis
- Die-cast metal housing
- Ideal for use on branch lines
The 70.0 series was a tank locomotive for light passenger trains. It was commissioned by the Royal Bavarian State Railways as the Pt 2/3 class. Between 1909 and 1916, Krauss in Munich built a total of 97 machines. In order to optimize traffic on the local railways, a door was installed at the back through which the stoker could enter the train to take over the duties of the conductor. Another characteristic of this locomotive was the unusually large distance between the driving and running axles of 4,000 mm. This resulted in an economical but economically sensible lightweight construction of the machine, which proved to be extremely successful.
After the Second World War, the DB took over 89 locomotives, which could reach speeds of up to 65 km/h, and used them on southern German branch lines until the 1960s. The last locomotive was decommissioned in 1963.
- The model is factory-equipped with a permanently soldered digital decoder
- Finely detailed model with rocker bearing chassis
- Die-cast metal housing
- Ideal for use on branch lines
The 70.0 series was a tank locomotive for light passenger trains. It was commissioned by the Royal Bavarian State Railways as the Pt 2/3 class. Between 1909 and 1916, Krauss in Munich built a total of 97 machines. In order to optimize traffic on the local railways, a door was installed at the back through which the stoker could enter the train to take over the duties of the conductor. Another characteristic of this locomotive was the unusually large distance between the driving and running axles of 4,000 mm. This resulted in an economical but economically sensible lightweight construction of the machine, which proved to be extremely successful.
After the Second World War, the DB took over 89 locomotives, which could reach speeds of up to 65 km/h, and used them on southern German branch lines until the 1960s. The last locomotive was decommissioned in 1963.
49.49 EUR*
Art.-no. Minitrix_15992
Minitrix
Prototype: Roll-top car type Tamns 893 based on the high-side car EANOS 052 of the Deutsche Bahn AG (DB AG).
Model: Reissue with a new running number (31 80 080 6 134-9). Kinematics for close coupling. Length over buffers 98 mm.
Model: Reissue with a new running number (31 80 080 6 134-9). Kinematics for close coupling. Length over buffers 98 mm.
269.10 EUR*
Art.-no. Minitrix_16898
Minitrix
Prototype: German Federal Railways (DB) tank locomotive 89 826 (formerly class R 3/3 of the K.Bay.Sts.B.). Wheel arrangement C n2t, built from 1898. Operating condition from 1959 (BD Nuremberg / Bw Ansbach).
Highlights: Die-cast zinc housing
Model: Built-in digital decoder for operation with mfx and DCC. 3 axles powered, warm white LED headlights that change with the direction of travel, can be switched digitally, works in analog mode. Housing and supports made of die-cast zinc. Length over buffers 60 mm.
Highlights: Die-cast zinc housing
Model: Built-in digital decoder for operation with mfx and DCC. 3 axles powered, warm white LED headlights that change with the direction of travel, can be switched digitally, works in analog mode. Housing and supports made of die-cast zinc. Length over buffers 60 mm.
22.99 EUR
(RRP*)
20.69 EUR*
Art.-no. Minitrix_18098
Minitrix
Prototype: 2-axle tank car "MILLET", used by the French State Railways (Société nationale des chemins de fer français / SNCF).
Model: Attached platform, walkway and ladder. Detailed chassis with openwork frame. Simplified design. Length over buffers 55 mm.
Model: Attached platform, walkway and ladder. Detailed chassis with openwork frame. Simplified design. Length over buffers 55 mm.
149.00 EUR
(RRP*)
134.10 EUR*
Art.-no. Minitrix_18266
Minitrix
Prototype: Three 4-axle chemical tank cars from the Millet company. Registered in the Netherlands. Current operating condition.
Model: Detailed chassis with openwork frame. Y25 type bogies. Attached work platform. Attached brakeman's platform. Total length over buffers 240 mm.
Model: Detailed chassis with openwork frame. Y25 type bogies. Attached work platform. Attached brakeman's platform. Total length over buffers 240 mm.
119.00 EUR
(RRP*)
99.99 EUR*
Art.-no. Minitrix_18286
Minitrix
Prototype: Express train passenger car set consisting of a type WR4ü express train dining car and a type Pw4ü-37 express train baggage car (road number 105 817) of the German Federal Railroad (DB) around 1952. Train route: Hamburg - Cologne.
Model: Car with kinematics for close coupling.
Total length over buffers 300 mm.
The matching interior lighting: 66612 LED interior lighting.
You can get a prototypical train with the class 03 locomotive, item number 16032 and with the express train carriage set 18287, as well as the 3rd class carriages 18486 and 18487.
Model: Car with kinematics for close coupling.
Total length over buffers 300 mm.
The matching interior lighting: 66612 LED interior lighting.
You can get a prototypical train with the class 03 locomotive, item number 16032 and with the express train carriage set 18287, as well as the 3rd class carriages 18486 and 18487.
119.00 EUR
(RRP*)
99.99 EUR*
Art.-no. Minitrix_18287
Minitrix
Prototype: Express train passenger car set consisting of an express train passenger car, 1st/2nd class, type AB4ü-38 (train route Hamburg - Cologne) and an express train through coach, 2nd/3rd class, type BC4ü-39 (train route Hamburg - Basel) of the German Federal Railroad (DB), around 1952.
Model: Car with kinematics for close coupling.
Total length over buffers 266 mm.
The matching interior lighting: 66616 LED interior lighting.
You can get a prototypical train with the class 03 locomotive, item number 16032 and with the express train carriage set 18286, as well as the 3rd class carriages 18486 and 18487.
Model: Car with kinematics for close coupling.
Total length over buffers 266 mm.
The matching interior lighting: 66616 LED interior lighting.
You can get a prototypical train with the class 03 locomotive, item number 16032 and with the express train carriage set 18286, as well as the 3rd class carriages 18486 and 18487.
54.99 EUR
(RRP*)
49.49 EUR*
Art.-no. Minitrix_18415
Minitrix
Prototype: Roll-up roof car type Tamns 893 of the Deutsche Bahn AG (DB AG).
Model: Kinematics for close coupling. Length over buffers 98 mm.
Model: Kinematics for close coupling. Length over buffers 98 mm.
69.90 EUR
(RRP*)
62.91 EUR*
Art.-no. Arnold_HN6697
Arnold
ÖBB, 2-piece set of two-axle sliding tarpaulin wagons of the Kils type, “Rail Cargo Austria”, grey-red livery, Ep. V-VI
69.90 EUR
(RRP*)
62.91 EUR*
Art.-no. Arnold_HN6698
Arnold
FS, close-coupled sliding tarpaulin double wagon (2 x 2 axles) of the Laails 2 type, “Ausiliare Milano”, blue livery, Ep. IV-V
69.90 EUR
(RRP*)
39.99 EUR*
Art.-no. Arnold_HN6699
Arnold
DB AG, 2-piece set of two-axle sliding tarpaulin wagons of the Kijls type, traffic red livery, Ep. V-VI
166.41 EUR*
Art.-no. Arnold_HN2599
Arnold
DR, six-axle diesel locomotive 132 483-9 in red livery with a gray roof, Ep. IV
Additional model information:
Built in 1976 by the October Revolution Locomotive Factory, Voroshilovgrad, Fab. No.: 00718
Acceptance: March 12, 1977 as 132 483-9
First branch: Leipzig Hbf Süd
other depots: Halberstadt, Magdeburg, Reichenbach (Vogtl), Görlitz, Dresden, Oberhausen-Osterfeld Süd
January 1, 1992: New number 232 483-8
May 18, 2001: New number 241 804-4
08/07/2014: Decommissioned at the Oberhausen-Osterfeld Süd depot
Model as it was in 1977
Additional model information:
Built in 1976 by the October Revolution Locomotive Factory, Voroshilovgrad, Fab. No.: 00718
Acceptance: March 12, 1977 as 132 483-9
First branch: Leipzig Hbf Süd
other depots: Halberstadt, Magdeburg, Reichenbach (Vogtl), Görlitz, Dresden, Oberhausen-Osterfeld Süd
January 1, 1992: New number 232 483-8
May 18, 2001: New number 241 804-4
08/07/2014: Decommissioned at the Oberhausen-Osterfeld Süd depot
Model as it was in 1977
274.41 EUR*
Art.-no. Arnold_HN2599S
Arnold
DR, six-axle diesel locomotive 132 483-9 in red livery with grey roof, Ep. IV, with DCC sound decoder
166.41 EUR*
Art.-no. Arnold_HN2600
Arnold
DR, six-axle diesel locomotive 142 002-5 in red livery with a gray roof, Ep. IV
Additional model information:
Built in 1977 by the October Revolution locomotive factory, Voroshilovgrad, Fab. No.: 100020
Acceptance: June 1, 1977 as 142 002-5
First branch: Halle (Saale) P
other branches: Halle (Saale) G and Stralsund
January 1, 1992: New number 242 002-4
March 10, 1995: Decommissioned at the Stralsund depot
1995: Sold to Eisenbahn-Betriebs-Gesellschaft mbH, Binz-Prora (Rügen)
Then resold, in operation in East Germany until October xx, 2021
xx.10.2021 Delivery to Southeast Europe
Model as it was in 1977
Additional model information:
Built in 1977 by the October Revolution locomotive factory, Voroshilovgrad, Fab. No.: 100020
Acceptance: June 1, 1977 as 142 002-5
First branch: Halle (Saale) P
other branches: Halle (Saale) G and Stralsund
January 1, 1992: New number 242 002-4
March 10, 1995: Decommissioned at the Stralsund depot
1995: Sold to Eisenbahn-Betriebs-Gesellschaft mbH, Binz-Prora (Rügen)
Then resold, in operation in East Germany until October xx, 2021
xx.10.2021 Delivery to Southeast Europe
Model as it was in 1977
274.41 EUR*
Art.-no. Arnold_HN2600S
Arnold
DR, six-axle diesel locomotive 142 002-5 in red livery with grey roof, Ep. IV, with DCC sound decoder
166.41 EUR*
Art.-no. Arnold_HN2601
Arnold
DB Bahnbau, diesel locomotive 233 493-6 in yellow livery, epoch six
274.41 EUR*
Art.-no. Arnold_HN2601S
Arnold
DB Bahnbau, diesel locomotive 233 493-6 in yellow livery, Ep. VI, with DCC sound decoder
116.90 EUR
(RRP*)
105.21 EUR*
Art.-no. Arnold_HN6602
Arnold
SNCF, 3-piece set of open freight wagons of the Eamnos type, Ep. VI
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6672
Arnold
RENFE, 2-pcs. Set of three-axle tank wagons “Savesa”, Ep. IV
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6673
Arnold
RENFE, 2-pcs. Set of three-axle tank wagons “Borges”, Ep. III
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6674
Arnold
RENFE, 2-pcs. Set of three-axle tank wagons “CAMPSA”, Ep. III
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6675
Arnold
SNCF, 2-piece set of three-axle wine tank wagons, “SGTL SEWAR”, Ep. IV
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6676
Arnold
SNCF, 2-part Set of three-axle tank wagons, “AVIA”, Ep. IV
81.90 EUR
(RRP*)
73.71 EUR*
Art.-no. Arnold_HN6677
Arnold
SNCF, 2-piece set of three-axle tank wagons, “Petroles de l´Ouest”, grey livery, Ep. IV
69.90 EUR
(RRP*)
62.91 EUR*
Art.-no. Arnold_HN6695
Arnold
RENFE, 2-piece set of two-axle sliding tarpaulin wagons of the Lis type, “Transfesa” (with old logo), Ep. IV
69.90 EUR
(RRP*)
62.91 EUR*
Art.-no. Arnold_HN6696
Arnold
SNCF, 2-piece set of two-axle sliding tarpaulin wagons, type K70 Kils, blue livery, “FRET”, Ep. IV-V
14.99 EUR*
Art.-no. RAILNSCALE_N9026
RAILNSCALE
With this roller you can easily build wooden crossings. The roller is suitable for straight and curved tracks. Role DAS or Darwi Classic modeling material and print the desired road pattern into the wet clay. This tool cannot be used in railway switches or rails with moving parts! It is recommended to create a sample first so you can learn what the possibilities are.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic.
[nbsp]
Yours sincerely
Daniel Mrugalski
DM-Toys
[nbsp]