N-Scale 03/2024: 20 years of DM-Toys – reissue of the ET 403

9.99 EUR^*

Art.-no. MU_N-B00193

Modellbahn Union

The master's office was built on the east side of the AW Speldorf forge. The kit can be attached to any standard factory building and can also be used for other purposes. A separate installation is also possible.

269.00 EUR (RRP*)

215.20 EUR^*

Art.-no. Minitrix_16233

Minitrix

New edition 2024 with new company number
Prototype: Deutsche Bahn AG diesel locomotive 232 600-7, wheel arrangement Co´Co´, built from 1974 in the USSR for the Deutsche Reichsbahn, nicknamed “Ludmilla”. From 1992 remotorization in the AW Cottbus for travel at 140 km/h. Use: heavy passenger and freight trains.

Model: Built-in digital decoder and noise generator for operation with DCC, Selectrix and Selectrix 2. Motor with flywheel, 4 axles powered, traction tires. Length over buffers 126 mm.

The locomotive has 3-light headlights, alternating white/white with the direction of travel

Highlight: Affordable model with sound from the new hobby range.

429.00 EUR (RRP*)

359.99 EUR^*

Art.-no. Minitrix_16345

Minitrix

For the InterCity traffic (IC 71) planned from 1971, series production of the 103 series began in 1969, but with new specifications: the trailer loads of TEE and IC trains at 200 km/h increased from 300 to 480 t and 800 t heavy express trains should still be able to be transported at 160 km/h. For the 145 series locomotives - now referred to as the 103.1 series - this led to a whopping increase in output of 25.3% compared to the prototypes - a total of an impressive 7,440 kW or 10,116 hp. After their delivery between 1970 and 1974, the 103.1 immediately took over the new IC trains and of course the prestigious TEE, some of which had now even been integrated into the new IC network. Only after more than thirty years of use in heavy, high-quality passenger train service with maximum mileage did the series locomotives perform their last scheduled service in December 2002.

Prototype: German Federal Railroad (DB) electric locomotive 103 237-4 as it looked around 1985. Basic paint scheme in crimson red/ivory. Wheel arrangement Co'Co', built from 1970.

Highlights:
- Technology variant
- Housing made of metal-filled plastic
- Digitally raised and lowered roof pantographs
- Digital sound with many functions
- Lighting with warm white LED

Model: Housing made of metal-filled plastic for improved traction. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Roof pantograph can be raised and lowered digitally. Head and tail signals that change with the direction of travel, with warm white LEDs, driver's cab lighting, engine room lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars.
Analog headlights that change depending on the direction of travel.
Anniversary logo “150 Years of German Railways” included as a slide-in image.
Length over buffers 126 mm.

The 103 237-4 electric locomotive is an ideal match for the special TT on page 20.

One-off series.

329.00 EUR (RRP*)

249.99 EUR^*

Art.-no. Minitrix_16433

Minitrix

Prototype: German State Railroad electric locomotive 243 357-1. Wheel arrangement Bo'Bo', built from 1984. Operating condition around 1990. Use: freight and passenger trains.

Highlights:
- New design
- Lots of sound features
- Lighting with warm white LEDs
- Cab lighting
- Headlights can be switched off

Model: Housing and carrier made of die-cast zinc. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Analog headlights that change depending on the direction of travel. Attached handlebars. Length over buffers 104 mm.

You can find spare parts for our items here in our spare parts search.

479.00 EUR (RRP*)

359.99 EUR^*

Art.-no. Minitrix_16443

Minitrix

Prototype: German State Railroad (DR) steam locomotive with a steam tender, road number 44 9612-1 (type 1´E h3) with a type 2´2´ T 24 powdered coal tub tender. The locomotive looks as it did around 1974. Use: Heavy goods and passenger trains.

Highlights:
- Form variant with coal dust tender
- Metal finish
- Bell-shaped armature motor with flywheel
- Steam train sound
- Engine lighting
- Firebox flicker

Model: Variant. Die-cast metal locomotive and tender. Bell-shaped armature motor with flywheel built into the boiler. 5 axles powered by coupling rods, traction tires. Built-in mfx DCC digital decoder and sound generator. The locomotive and tender are closely coupled. 2-light headlights, engine and driver's cab lighting made of warm white LEDs. Firebox flickering by means of processor-controlled light-emitting diodes (red-orange). 2-light front signal analog in operation. NEM coupler pocket at the end of the tender. to open the smokebox door.
Length over the buffers 141 mm.

259.00 EUR (RRP*)

219.99 EUR^*

Art.-no. Minitrix_16009

Minitrix

Prototype: Dutch State Railways (NS) class 1600 fast general-purpose locomotive with the road number 1652 and the "UTRECHT" city coat of arms. Built from 1976.

Model: Digital interface, 5-pole motor with flywheels, 4 axles powered, traction tires, close coupler mechanism. LED front and rear signal that changes with the direction of travel. Length over buffers 109 mm.

329.00 EUR (RRP*)

249.99 EUR^*

Art.-no. Minitrix_16142

Minitrix

Prototype: Deutsche Bahn AG (DB AG) standard electric locomotive 141 083-6. Traffic red basic paint scheme. Version with double lamps, ventilation grille of the Klatte type. 2003 to 2006. 141 083-6 is not operational today in the Bavarian Railway Museum in Nördlingen. Use: Light goods and passenger trains for local and long-distance traffic.

Highlights: digital sound with many functions.

Model: New construction. Housing and support made of die-cast zinc. Built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white LEDs, driver's cab lighting, can be controlled digitally. Attached handle bars. There are decals to show the farewell trip in 2006. Length over the buffers 98 mm.

329.00 EUR (RRP*)

259.99 EUR^*

Art.-no. Minitrix_16143

Minitrix

Prototype: German Federal Railroad (DB) class E 41 standard electric locomotive. Chrome oxide green basic color. Version with double lamps, multiple nozzle ventilation grille with vertical slats and all-round rain gutter. Road number E 41 208. The vehicle looks as it did around 1964. Use: Light goods and passenger trains for local and long-distance traffic.

Highlights:
- Housing completely made of die-cast zinc
- Digital sound with many functions

Model: New construction. Housing and support made of die-cast zinc. Built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white LEDs, driver's cab lighting, can be controlled digitally. NEM coupling shaft. Attached handle bars. Length over the buffers 98 mm.

329.00 EUR (RRP*)

199.99 EUR^*

Art.-no. Minitrix_16144

Minitrix

Prototype: German Federal Railroad (DB) standard electric locomotive 141 430-9. Orient red basic color scheme. Version with double lamps, fan grille of the Klatte type. State around 1987.

Highlights:
- Digital sound with many functions

Model: Housing and bracket made of die-cast zinc. Built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Attached handle bars.
The headlights change over with the direction of travel and work in analogue mode.
Length over the buffers 98 mm.

299.99 EUR (RRP*)

249.99 EUR^*

Art.-no. Minitrix_16692

Minitrix

Prototype: Class BB 9200 express electric locomotive in the classic blue-green livery of the French State Railways (SNCF). Operating condition around 1973. Year of construction from 1957.

Highlights:
- Digital sound with many functions

Model: Form variant with scissor pantographs (roof equipment). Built-in digital decoder and sound generator for operation with DCC and Selectrix. Flywheel motor, 4 axles powered, traction tires. Headlights and tail lights change with the direction of travel, with warm white LEDs, cab lighting, digitally switchable. Kinematics for close coupling. Attached handles. The headlights change depending on the direction of travel and operate in analog mode. Length over the buffers 101 mm.

319.00 EUR (RRP*)

269.99 EUR^*

Art.-no. Minitrix_16693

Minitrix

Prototype: French State Railways (SNCF) express train electric locomotive BB 9231 in the special Arzens livery. Operating condition around 1985. Year of construction from 1957.

Highlight: Digital sound with many functions

Model: shape variant. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars. Analog headlights that change depending on the direction of travel. Length over buffer 101 mm.

349.00 EUR (RRP*)

279.99 EUR^*

Art.-no. Minitrix_16764

Minitrix

Prototype: Swiss Federal Railways (SBB/CFF/FFS) class Re 460 fast multi-purpose locomotive. Named locomotive 460 118-3 "Gotthard"/"Gottardo". Operating condition around 2002. Use: passenger trains.

Highlights:
- With digital decoder DCC/mfx
- Swiss light change
- Many sound and switching functions
- Headlights with warm white LEDs

Model: Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. With NEM coupling shaft. Length over buffers 115 mm.

22.99 EUR (RRP*)

17.99 EUR^*

Art.-no. Minitrix_18082

Minitrix

Prototype: Omm 53 high-side car of the German Federal Railways (DB). European standard type with 10.0 m length.

Model: With kinematics for close coupling, simplified design. Length over buffer 63 mm.

22.99 EUR (RRP*)

19.99 EUR^*

Art.-no. Minitrix_18083

Minitrix

High sidecar Es 5520 of the Deutsche Reichsbahn (DR). European standard type with 10.0 m length.

Model: with kinematics for close coupling, simplified design. Length over buffer 63 mm.

22.99 EUR (RRP*)

19.99 EUR^*

Art.-no. Minitrix_18089

Minitrix

Prototype: Czech Railways (CD Cargo) Es 110.8 high-sided gondola car. European standard type with a length of 10.0 m.

Model: With kinematics for close coupling, simplified version.
Length over the buffers 63 mm.

189.00 EUR (RRP*)

139.99 EUR^*

Art.-no. Minitrix_18209

Minitrix

Prototype: 1 type BPw4yg conversion car, 1 express train car, 1st/2nd 1st class streamlined type AB4yse and 1 2nd class express train passenger car 2nd class streamlined type B4ylwe as it looked around 1959 of the Deutsche Bundesbahn (DB) in bottle green livery.
Model: new construction. All cars with close coupler mechanism. The B4ylwe express train car is equipped with an LED train rear end signal and has bogies of the Reichsbahn profile iron standard design. The AB4yse express train wagon has standard design bogies made of sheet metal. Prepared for the subsequent installation of interior lighting. Total length over the buffers 390 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a complete train with the 18409 add-on car and the class 18.4 steam locomotive, item number 16184.

175.00 EUR (RRP*)

139.99 EUR^*

Art.-no. Minitrix_18271

Minitrix

Prototype: 4 four-axle self-unloading wagons type Tal 963 (Kkt-62) of the German Federal Railroad (DB). Version with two unloading flaps on each long side and a brakeman's platform at the front. Cars with bogies of the Minden-Dorstfeld type. Used for transporting moisture-sensitive and moisture-insensitive goods. Operating condition in the 1980s.
Model: New design. Self-unloading wagons in detailed design with different company numbers. All cars have a brakeman's platform and an adjusting wheel on the front. All cars with kinematics for close coupling. A carriage with printed train end discs at one end of the carriage. Total length over buffers 284 mm.

One-off series.

58.99 EUR (RRP*)

39.99 EUR^*

Art.-no. Minitrix_18409

Minitrix

Prototype: German Federal Railroad (DB) streamlined type B4ylwe express train passenger car, 2nd class, as it looked around 1959 in a bottle green paint scheme.
Model: new construction. Wagons with a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Length over the buffers 134 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a complete train with the 18409 add-on car and the class 18.4 steam locomotive, item number 16184.

135.00 EUR (RRP*)

109.99 EUR^*

Art.-no. Minitrix_18726

Minitrix

Prototype: 3 different private beer cars, in two different designs, from the breweries “Franziskaner-Leistbräu”, “Pschorrbräu München” and “Auer'sche Bierbrauerei Rosenheim”, used by the Royal Bavarian State Railways (K.Bay.Sts.B.) . Version with brakeman's cab.

Model: with kinematics for close coupling. Total length over buffers 148 mm.

119.00 EUR (RRP*)

79.99 EUR^*

Art.-no. Minitrix_18901

Minitrix

Prototype: 3 boxcars type Gbs 258 (formerly Gbs 1500 of the DR) for the German Railroad, Inc. (DB AG). Executed around 1996. Use: For goods sensitive to moisture.

Model: The cars have different car numbers and a close coupling mechanism.
Total length over the buffers 264 mm.

46.99 EUR (RRP*)

39.99 EUR^*

Art.-no. Minitrix_18907

Minitrix

Prototype: ARMITA WAGONS round slide side unloading car Tds, used on the Dutch State Railways (NS). Version with a swivel roof over the loading space. Application: For moisture-sensitive goods.

Model: Self-unloading wagon with load insert, with kinematics for close coupling (road number corresponds to wagon 1, or wagon 2 or wagon 3 from article 15511). Length over buffers 60 mm.

269.10 EUR^*

Art.-no. Minitrix_15080

Minitrix

Prototype: 5 Laude type Sgmmnss 40' four-axle container transport cars and 1 AAE type Sgmmns 190 four-axle container transport car. Loaded with coils. Operating condition 2017.

Highlights:
new construction

Model: new construction. Die-cast metal chassis, type Y 25 bogies, with close coupling mechanism, loaded with coils.
Seperatly packaged. Additional outer packaging. Total length over buffers 510 mm.

279.00 EUR (RRP*)

229.99 EUR^*

Art.-no. Minitrix_15405

Minitrix

Prototype: 2 streamlined design C4ylb-43/52 express train passenger cars and 1 streamlined design C4ylf-43/52 control car as it looked around 1954 of the German Federal Railroad (DB) in a crimson paint scheme.

Highlights:
- New construction
- LED headlights
- LED interior lighting

Model: new construction. All cars have a close coupler mechanism and built-in interior lighting. Control car with automatic light change white/red, can be switched digitally via the function decoder, also works in analogue mode. Total length over the buffers 402 mm.

You get a complete train with the 15406 car set and the class V 80 diesel locomotive, item number 16801.

129.00 EUR (RRP*)

99.99 EUR^*

Art.-no. Minitrix_15406

Minitrix

Prototype: 2 German Federal Railroad (DB) streamlined design C4ylb-43/52 fast train cars as they looked around 1954 in a crimson paint scheme.

Highlights:
- New construction
- LED interior lighting

Model: new construction. All cars have a close coupler mechanism and built-in interior lighting. Total length over the buffers 268 mm.

You get a complete train with the 15405 car set and the class V 80 diesel locomotive, item number 16801.

42.90 EUR (RRP*)

26.99 EUR^*

Art.-no. Fleischmann_6260021

Fleischmann

2nd class express train car, type Bühe, of the German Reichsbahn.

- Item No. 6260020: Changed company number
- Suitable for the BR 62 steam locomotive, item no. 7160005, 7170005

89.91 EUR^*

Art.-no. Fleischmann_860884

Fleischmann

IC/EC control car 2nd class, type Bpmmbdzf 286.3, of the Deutsche Bahn.

- IC/EC carriages with current lettering
- With function decoder for light changes (white/red) for both analogue and digital operation

DB AG purchased two types of control cars for InterCity traffic. The 75 examples of the Bpmbdzf 296 design (originally Bpmbdzf 297) are pressure-tight and air-conditioned, have swivel-sliding doors and large-capacity seating. In contrast to the Bimdzf 271 design, the side members have aerodynamic skirts.

23.70 EUR^*

Art.-no. Artitec_14.177

Artitec

Artitec kits are made of resin and photo-etched parts. In the packaging you will find cast resin parts. This material is sometimes a bit rough and needs to be rubbed or trimmed, so we recommend having a sharp scalpel knife and some sandpaper ready. The resin is not painted and can be painted with Revell enamel paints (5, 8, 37, 75, 86 and 99). The small details are made of fine photo-etched parts.

30.90 EUR^*

Art.-no. Artitec_316.114

Artitec

Artitec ready-made models are handcrafted from resin and etched metal parts. Each model is hand-painted and sometimes slightly weathered. Our models are all unique collector's items.

22.90 EUR^*

Art.-no. Artitec_316.121

Artitec

Artitec finished models are handcrafted from resin and etched metal parts. Each model is hand-painted and sometimes slightly weathered. Our models are all unique collector's items.

11.90 EUR^*

Art.-no. Artitec_5160001

Artitec

The Artitec figures are all hand-painted in realistic colors. More than ten different colors are often required for a set. Many of our figure sets are combined with fine etched parts that provide additional details.

12.90 EUR^*

Art.-no. Artitec_5160003

Artitec

The Artitec figures are all hand-painted in realistic colors. More than ten different colors are often required for a set. Many of our figure sets are combined with fine etched parts that provide additional details.

31.10 EUR^*

Art.-no. Artitec_6160080

Artitec

Resin handcrafted finished model with etched parts Interior dimensions of the loading area (L x W x H in mm): 21.8 x 12.2 x 10.

27.80 EUR^*

Art.-no. Artitec_6160085

Artitec

Artitec prefabricated models are built by hand from resin and photo-etched parts. Each model is hand painted and sometimes slightly aged. The models are of high collector's quality.

6.90 EUR^*

Art.-no. Rietze_16400

Rietze

New shape in 3D printing

6.90 EUR^*

Art.-no. Rietze_16404

Rietze

New shape in 3D printing

6.99 EUR^*

Art.-no. MicromotorEU_3803

Micromotor.EU

Recommended screw locking adhesive to firmly glue the micromotor shafts, screws and motors.

Prevents unintentional screw loosening and vibration loosening. Cures quickly and reliably. Can be used on oiled surfaces. Seals screws and prevents leaks. Has good chemical resistance. With a wide temperature range from -60 ° C to +150 ° C.

Apply evenly to bolts or nuts. Curing takes place in the absence of air (anaerobic). A distinction must be made between active and passive materials in terms of curing time. In the case of active materials, one speaks of metals with a high iron or copper content (e.g. iron, steel, copper, brass, bronze). Active materials ensure rapid curing. In the case of passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics, the hardening takes place very slowly.