N-Scale 11/2023: Model Railroad cleaning
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
The special sponge conducts electricity and thus cleans the rotating wheels of locomotives particularly gently. The 2 cables can be connected to the track system or a transformer. The function is therefore guaranteed for both analog and digital locomotives. The locomotive in the picture is not included.
The Tsugawa wheel cleaner is characterized by its electrically conductive sponge, which polishes the locomotive wheels rather than scratching them. Traction tires are not damaged if used properly.
The special sponge conducts electricity and thus cleans the rotating wheels of locomotives particularly gently. The 2 cables can be connected to the track system or a transformer. The function is therefore guaranteed for both analog and digital locomotives. It is very easy to use: Connect the alligator clips to the rail and place the locomotive on the wheel cleaner. The speed can be regulated via the transformer. The locomotive should be held on the wheel cleaner with light pressure.
Replacement pads with item number 4000-1 are available for this item.
Usable length: 18cm
In our DM-Toys blog by Jürgen Plack there are more interesting photos, information and advice on using the Tsugawa pads.
Hans Werner Osburg made a comprehensive test of the various cleaning methods for our blog.
Replacement pads for item no. 4000 with adhesive strips for easy assembly
In our DM-Toys blog by Jürgen Plack there are more interesting photos, information and advice about the use of the Tsugawa pads.
Hans Werner Osburg made a comprehensive test of the various cleaning methods for our blog.
Content: 100ml
- Maximizes conductivity and reliability,
- Works in low power/confined space situations,
- Revives old electric contacts and improves new ones,
- Safe on plastic, foam, acrylic and enamel paint.
SR24 can be used as a rail cleaning oil. Simply put SR24 on a rag and clean the tracks with it. The SR24 can also be used as a cleaning fluid in a rail cleaning vehicle. Individual parts can also be gently cleaned in an ultrasonic bath with SR24, the plastic parts are not attacked.
SR24 can also be used as steam oil in all smoke generators.
SR24 can be used as a rail cleaning oil. Simply put SR24 on a rag and clean the tracks with it. The SR24 can also be used as a cleaning fluid in a rail cleaning vehicle. Individual parts can also be gently cleaned in an ultrasonic bath with SR24, the plastic parts are not attacked.
SR24 can also be used as steam oil in all smoke generators.
perfect for axles, gearbox of locomotives
The classic in a new design! Immediately available, permanently reduced in price!
The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner.
Functionality:
It is operated using 12V DC voltage and being pulled or pushed by a motorized vehicle. The analogue version is not suitable for digital model railways, as the permanently applied current overloads the motor and triggers the heat protection switch.
You can purchase the car directly from us in the digital version. We convert the car with a Doehler and Haass decoder which we solder.
Cart Length: 120mm
The classic in a new design! Immediately available, permanently reduced in price!
The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner.
Functionality:
It is operated using 12V DC voltage and being pulled or pushed by a motorized vehicle. The analogue version is not suitable for digital model railways, as the permanently applied current overloads the motor and triggers the heat protection switch.
You can purchase the car directly from us in the digital version. We convert the car with a Doehler and Haass decoder which we solder.
Cart Length: 120mm
Suitable for all cleaning trolleys from the Tomix range.
Model: Era IV, with close coupling mechanism. On the underside of the vehicle is a holder with rail cleaning felt according to the Jörger system. The cleaning felts are washable at 30 °. 2 replacement felts included. Length over the buffers 88 mm.
This is a cleaning brush for cleaning locomotive wheels. It can be used for Minitrix and Märklin Mini-Club (Z Gauge) models. Clean wheels ensure good current conductivity and prevent interference with radio and television reception. This brush is also suitable for cleaning track.
- Just let it run along in a train
- Rails always in top condition
Track cleaning trolley with a real cleaning effect. Dust, rubber abrasion, oil, etc. are reliably removed. The rail surface is not attacked, so that new dirt does not settle again so quickly.
And it's so easy to use:
- The cleaning dwarfs consist of a robust plastic body with a brush-like cleaning surface that effectively removes the dirt on the rails.
- The dwarfs are simply clipped onto the axles of a wagon - and then they clean the rails in normal driving mode in both directions, as it were!
- The cleaning dwarfs in N can be used for two-axle wagons of all brands (axle diameter max. 1.4 mm).
- The cleaning dwarf should only be replaced when the cleaning surface is heavily soiled.
The set contains everything you need to clean and maintain your track. The packaging can be used as a shelf. Replacement pads available. Suitable for N, HO, HOn3 and three-rail O tracks.
Patented product
Suitable for N, HO, HOn3 and three-rail O-gauge tracks.
Patented product
Suitable for N, HO, HOn3 and three-rail O track tracks.
Patented product
Suitable for N, HO, HOn3 and three-rail O gauge tracks.
RoHs compliant
Patented product
4/pkg
1.85 fl oz (54.7 mL)
Batteries not included
For cleaning, burnishing and polishing- this 4mm glass fibre pencil has a fast abrasive action. This tool contains glass fibre so extra care should be taken when handling.
For cleaning, burnishing and polishing- this 2mm glass fibre pencil has a fast abrasive action. This tool contains glass fibre so extra care should be taken when handling.
Dirt absorbing High-Tech cleaning material
Ideal for cleaning models, collectors items, etc.
Removes dirt and dust and eliminates 99.999% of bacteria*
Cleans every nook and cranny of model surface
Removes grime from tracks and improves the current pick-up
Leaves no deposit behind
Universal application. Do not rub, just press carefully!
Model Cleaner - neat and simple to use:
Just simply roll over, or press gently and the dirt is gone! Gently dab on delicate parts!
Just give it a try:
Simply press or roll over the surface (do not wipe!). The dirt and dust will easily be absorbed and locked in. A membrane in the Cyber Clean® itself will not allow the dust to be re-deposited elsewhere. Bugs and germs are also removed at the same time (disinfection action).
The perfect way to clean any model:
Cyber Clean® moulds itself into every nook, cranny and crevice of the model surface and »sucks« the dust and dirt away. In comparison to cleaning with a brush or cloth, the dirt is not brushed off, but simply absorbed into the mass of the material. This makes it the ideal way to clean roofs of model houses, streets, etc.
Suitable for all surfaces:
Cyber Clean® leaves no deposit behind, which makes it suitable for use on any surface, whether it´s wood, plastic or cardboard, for example the latest generation of laser-cut models. Cyber Clean® contains alcohol, which will remove grime from tracks or slot-car raceways enhancing the current pick-up. Cyber Clean® is also handy for cleaning keyboards (computers, mobiles, etc.), electrical equipment (CD player, etc.), air ventilation grills (car dashboards), leaves on plants and other toys.
Important to know:
Cyber Clean® is useable many times until it is full up (compare the color scale on the packing). Cyber Clean® can dry out if left in the open air – therefore after use, store it in the re-sealable packing. Cyber Clean® is not a fleck remover. Before using on valuable products, try it out first on a part which will not be seen. Cyber Clean® is made of environmentally friendly material and is biologically degradable. In principle, Cyber Clean® is not harmful, however, it is not a toy and, like all cleaning products, should be kept away from access by children.
Cyber Clean® Model Cleaner is exklusively produced for Busch.
* Tested after EN 1040, EN 1275 & EN 13697. Staphylococus aureus, Pseudomanas aeruginosa, Escherichia coli, Candida albicans (99.999%) & Aspergillus niger (99%).
Yours sincerely
Daniel Mrugalski
DM-Toys