N-Scale 10/2023: Micromotor, Minitrix, Faller, Schönwitz

19.99 EUR^*

Art.-no. MU_N-B00184

Modellbahn Union

Just like in real life, you can now find an old, dilapidated signal box next to your model railway. These relics of the past stand in many forgotten places, slowly but surely becoming part of nature. Our model is based on the signal box in Bedbrug-Hau. A small sticker sheet with five graffiti pieces is included with the kit.

14.99 EUR^*

Art.-no. MU_N-G-Fehldruck002

Modellbahn Union

Unfortunately, the DR was printed on the car instead of DB during the production process. Therefore, this incorrect production is being sold at a special price. Otherwise the cars are flawless. The wagon has the company number "466 9 664-3".

The LüP is 7.5cm per car.

equipped with:
- NEM coupling mounts
- Close coupling backdrop
- Standard N couplings

4.99 EUR^*

Art.-no. MU_N-X00010

Modellbahn Union

The Modellbahn Union Scharfenberg couplers for N-gauge offer the possibility to retrofit vehicles with and without NEM coupler holder. The couplers are fully functional and compatible with almost every vehicle due to three different lengths.
The set contains 6 couplers in three different lengths: 6mm, 8mm and 11mm, each measured from the mounting point in the NEM shaft to the end of the coupler. Due to the different lengths, the right combination can be found for every application. In addition, there are two short-coupling mechanism kits included, which can be built under vehicles without a NEM mount.
The couplings are connected by simply pushing them together and separated again by pulling. The flexible plastic ensures high durability. German and English instructions are enclosed with the couplings.

5.99 EUR^*

Art.-no. MU_N-X00020

Modellbahn Union

Chassis from overproduction of our ferry boat cars. Chassis with axles and couplings at a special price for hobbyists.

32.99 EUR^*

Art.-no. MicromotorEU_NA043

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with model Arnold BR 55 (DB, DR, SJ) KPEV G8, SNCB Reeks 81, SNCF 040 TC.

Replaces Arnold engine 2515-003

The locomotive is not included. You will find installation instructions under Downloads.

Scope of delivery:
- 1x engine 0812S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A13 10->12 3 mm

Replacement engine / conversion kit suitable for the following locomotives:
- Arnold No. 2515-2518, 2532-253

32.99 EUR^*

Art.-no. MicromotorEU_NB002

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with Brawa BR 118, BR 119, BR 132, BR 229, BR 232, BR 233, BR 234, Ludmilla, V 180, V 240, V 300.

The locomotive is not included. You will find installation instructions under Downloads.

Replaces engines 0005028.00, 0008739.00, 1300.50.05 and 1310.99.17.

For the oldest engines with long shafts there is conversion kit NB003!!

Scope of delivery:
- 1x engine 0816DH
- 1x engine mount S026 Startrain MU v1
- 2x shaft adapter A8 10->15 4.5 mm
- 2x stranded wire

Replacement motor / conversion kit suitable for the following items:
Brawa No. 1310-1313, 1404-1406, 1409, 1412-1414, 61000-61043, 61120-61125, 61128-61129, 61180-61183, 61185-61189, 61193-61194

32.99 EUR^*

Art.-no. MicromotorEU_NB003

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with Brawa BR 119, BR 229.

The locomotive is not included. You will find installation instructions under Downloads.

Replaces engine 0005028.00.

For the newer engines with short shafts, there is conversion kit NB002!!

Scope of delivery:
- 1x engine 0816DH
- 1x engine mount S026 Startrain MU v1
- 2x shaft adapter A4 10->15 12.5 mm
- 2x stranded wire

Replacement motor / conversion kit suitable for the following items:
Brawa No. 1400, 1402

32.99 EUR^*

Art.-no. MicromotorEU_ND001G

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with Dingler V 36 Post.

The locomotive is not included. You will find installation instructions under Downloads.

Scope of delivery:
- 1x engine 0812S
- 1x motor holder S019 Flm V110 DR MU v2
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-3.5-5

Replacement motor / conversion kit suitable for the following items:
Dingler 6233, 6235

32.99 EUR^*

Art.-no. MicromotorEU_NF060F

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with model Fleischmann BR 642, Desiro, DSB MQ, ÖBB Rh 5022.

Replaces Fleischmann engines No. 507420, 50742007, 50742010.
The locomotive is not included.

You will find installation instructions under Downloads.

Scope of delivery:
- 1x engine 0812S
- 1x motor holder S019 Flm V110 DR MU v2
- 1x shaft adapter A22 10->15 10 mm
- 1x flywheel F016

Replacement engine / conversion kit suitable for the following locomotives:
Fleischmann No. 7420, 7420 01-7420 98, 7 7420, 85 7420, 86 7420, 7422, 7422 01-7422 06, 7422 71-7422 77, 86 7422

32.99 EUR^*

Art.-no. MicromotorEU_NM042

Micromotor.EU

Conversion kit with high-quality bell armature motor, compatible with Minitrix Minitrix E 03 (2 motors!).

Replaces engine 40 0117 00 2x

The locomotive is not included. You will find installation instructions under Downloads.

Scope of delivery:
- 1x engine 0816DH
- 2x motor holder S005 Minitrix E10 1309 Motor MU v1
- 1x shaft adapter A2 10->12 20 mm
- 1x shaft adapter A21 10->12 14 mm
- 2x stranded wire

Replacement engine / conversion kit suitable for the following locomotives:
- Minitrix No. 2945

32.99 EUR^*

Art.-no. MicromotorEU_NP002C

Micromotor.EU

Conversion kit with high-quality bell-armature motor, compatible with Piko V 200.1, BR 221, NS 1200.

Replaces engines 40460-28, 40500-127.

The locomotive is not included. You will find installation instructions under Downloads.

Scope of delivery:
- 1x engine 0816D
- 1x motor holder S023 Liliput Flirt MU v1
- 2x flywheel F019
- 2x cardan coupling SP013
- 2x stranded wire

Replacement engine / conversion kit fits the following locomotives:
- Piko No. 40460-40467, 40500-40509

234.90 EUR (RRP*)

223.16 EUR^*

Art.-no. Fleischmann_7160006

Fleischmann

Steam locomotive class 24 of the German Reichsbahn.

- Nickname “Steppe Horse”
- Version with Wagner smoke deflectors
- Fine leading wheels with openwork spokes

The BR 24 was intended primarily for passenger trains, but thanks to its robust construction its area of application was soon expanded to include light freight trains, making it a reliable multi-purpose locomotive for lighter services.

41.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_6660004

Fleischmann

Compressed gas tank wagon, type Zags, of the German Reichsbahn.

Version with short sunroof

Compressed gas tank wagons are special wagons for liquefied, frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The striking, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

429.00 EUR (RRP*)

359.99 EUR^*

Art.-no. Minitrix_16345

Minitrix

For the InterCity traffic (IC 71) planned from 1971, series production of the 103 series began in 1969, but with new specifications: the trailer loads of TEE and IC trains at 200 km/h increased from 300 to 480 t and 800 t heavy express trains should still be able to be transported at 160 km/h. For the 145 series locomotives - now referred to as the 103.1 series - this led to a whopping increase in output of 25.3% compared to the prototypes - a total of an impressive 7,440 kW or 10,116 hp. After their delivery between 1970 and 1974, the 103.1 immediately took over the new IC trains and of course the prestigious TEE, some of which had now even been integrated into the new IC network. Only after more than thirty years of use in heavy, high-quality passenger train service with maximum mileage did the series locomotives perform their last scheduled service in December 2002.

Prototype: German Federal Railroad (DB) electric locomotive 103 237-4 as it looked around 1985. Basic paint scheme in crimson red/ivory. Wheel arrangement Co'Co', built from 1970.

Highlights:
- Technology variant
- Housing made of metal-filled plastic
- Digitally raised and lowered roof pantographs
- Digital sound with many functions
- Lighting with warm white LED

Model: Housing made of metal-filled plastic for improved traction. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Roof pantograph can be raised and lowered digitally. Head and tail signals that change with the direction of travel, with warm white LEDs, driver's cab lighting, engine room lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars.
Analog headlights that change depending on the direction of travel.
Anniversary logo “150 Years of German Railways” included as a slide-in image.
Length over buffers 126 mm.

The 103 237-4 electric locomotive is an ideal match for the special TT on page 20.

One-off series.

119.00 EUR^*

Art.-no. Minitrix_18251

Minitrix

Prototype: 1 2nd class express train car with luggage compartment type YB/70 and 1 1st class express train car of the Czech Railways (Ceské drahy CD) in moss green paint scheme. Year of manufacture from 1968.

Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting.
Total length over buffers 306 mm.

The matching interior lighting: 66616 LED interior lighting.

57.99 EUR^*

Art.-no. Minitrix_18451

Minitrix

Prototype: 1 Czech Railways (Ceské drahy CD) type Y/B express train car, 2nd class, in moss green paint. Year of manufacture from 1968.

Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting.
Length over buffers 153 mm.

The matching interior lighting: 66616 LED interior lighting.

Supplementary car for the 18251 passenger car set.

35.09 EUR^*

Art.-no. Minitrix_18973

Minitrix

Prototype: United States Transportation Corps type Uerdingen private tank car with a brakeman's platform. Used by the German Federal Railways around 1955.

Model: With kinematics for close coupling. (Company number corresponds to car 1, or car 2 or car 3 from article 18212). Length over buffers 78 mm.

9.99 EUR (RRP*)

8.99 EUR^*

Art.-no. Faller_155610

Faller

6 figures

9.99 EUR (RRP*)

8.99 EUR^*

Art.-no. Faller_155611

Faller

6 figures

12.99 EUR (RRP*)

11.69 EUR^*

Art.-no. Faller_155613

Faller

This kit contains: 7 individual parts in color.

12.99 EUR (RRP*)

11.69 EUR^*

Art.-no. Faller_155910

Faller

This kit contains: 6 individual parts in color.

1829.00 EUR (RRP*)

1699.99 EUR^*

Art.-no. Noch_88400

Noch

Model railroad pleasure always and everywhere!
When you go on a trip, you don't necessarily have to give up your favorite hobby. Packed safely and suitably for travel, the model train is fully functional in a suitcase. All suitcase systems are made from high-quality NOCH hard foam, hand-colored and lovingly decorated.

In the center of this pretty little N-gauge facility is a typical alpine village with four illuminated houses. The varied route leads through a tunnel and over a bridge.The trains make their rounds independently on two rail circuits. Power is supplied via a plug-in power supply (included in the scope of delivery).
Product Details:
· Ready-to-run model railroad system in an aluminum profile case (case dimensions: 79.5 x 54.5 cm, 16 cm high)
· Terrain made of structured hard foam, completely decorated
· Two traction circuits, ready to drive
· Control panel with two controllers
· Four illuminated buildings, individually controllable lights and automatic light mode
· Special driving functions: slow travel can be set for each track, speed synchronization between the rail circuits can be set
· Connection option for external power supply (included in delivery)

The tunnel portal has a clearance height of 3.9 cm.

Note train composition: Because of the narrow radii, the wagons used should not be longer than 13 cm.

0.49 EUR^*

Art.-no. Schoenwitz_06659

Schönwitz

End with the cable salad. With this simple order helper you lay the cables under the model railway system clean and clear.

Suitable for our LIFY strands. In each holder, up to 12 cables (max. Cross-section 0.25mm² / 1.3mm) can be clamped. For mounting, the holders are screwed or glued under the system.

Dimensions: length about 40mm - width about 6mm.

14.99 EUR^*

Art.-no. Schoenwitz_50020

Schönwitz

Ready for the light output of a model railroad transformer.

Technical specifications:
Connection to 12-16V DC or AC voltage
Illuminated with a yellow miniature LED
Diameter - approx. 6mm
Scale - 1: 160 / track N

11.99 EUR^*

Art.-no. Schoenwitz_50095

Schönwitz

Thanks to the MoBa distributor V1.1, it is possible to conveniently wire under the model railway layout. The high-quality screw terminals can be used to quickly supply new loads or track gates with voltage. All clamp points marked with "A" are connected with "B" just like all points. Next to each "A" terminal is a "B" terminal. So you can connect your consumers clearly without cable chaos.
Thanks to the status LEDs, you can see at any time under the system whether there is any voltage on the board or not, without measuring it.

If both LEDs are illuminated, an AC voltage is applied to "A" and "B".
If only LED "A" is lit, a DC voltage with plus is applied to "A" and minus to "B.
If only LED "B" is lit, a DC voltage with plus is applied to "B" and minus to "A.

You will receive a ready-made and tested board, including detailed instructions.

Technical information:
- 26 clamping points - 13x "A" and 13x "B"
- Status LEDs
- current carrying capacity per terminal - max. 8A
- total current carrying capacity - max. 8A (supply to 2-pin terminal)
- Maximum voltage - 30V AC / DC
- Dimensions approx. (L x W x H) - 60mm x 52mm x 13mm
- 4 holes for PCB mounting

1.49 EUR^*

Art.-no. Schoenwitz_50155

Schönwitz

This mounting kit has been put together to professionally and professionally fix circuit boards on a wooden or plastic base. The set includes 4 chipboard screws and 4 plastic spacers.

Technical specifications
- 4 plastic spacers / spacers (height 5mm)
- 4 chipboard screws galvanized with Pan-Head (3 x 20mm)

5.99 EUR^*

Art.-no. Schoenwitz_50157

Schönwitz

Thanks to the MoBa distributor V2, it is possible to comfortably wire under the model railway layout. The high-quality screw terminals can be used to quickly supply new loads or track gates with voltage. All clamp points marked with "A" are connected with "B" just like all points. Next to each "A" terminal is a "B" terminal. So you can connect your consumers clearly without cable chaos. Thanks to the status LEDs, you can see at any time under the system whether there is any voltage on the board or not, without measuring it.

If both LEDs are illuminated, an AC voltage is applied to "A" and "B".
If only the green LED is lit, a DC voltage with plus at "A" and minus at "B" is applied.
If only the yellow LED is lit, a DC voltage with plus is applied to "B" and minus to "A".

Technical information:
- 12 clamping points - 6x "A" and 6x "B"
- Status LEDs
- current carrying capacity per terminal - max. 8A
- total current carrying capacity - max. 8A
- Maximum voltage - 30V AC / DC
- Cross section - max. 1,5mm²
- Dimensions approx. (L x W x H) - 75mm x 15mm x 13mm
- 2 holes for PCB mounting

17.99 EUR^*

Art.-no. Schoenwitz_50185

Schönwitz

The fuse distributor offers you 4 separate and protected circuits. Protect your model railway and separate different supply areas (signals / points / lighting / traction current). In case of an error, the chance of a cable fire * is reduced and you can find the source of the error faster. Without your model train failing in one fell swoop.

The four status LEDs provide an overview at all times of whether the fuse has tripped and the output is supplied with power.

This is the conventional protection with 4 5x20mm miniature fuses of 500mA average.

If the consumers are protected otherwise than with 500mA funds, you can replace the fuse inserts up to a value of 12A.

Technical specifications:
- number of storm circuits - 4
- Dimensions (L x W x H) - 65mm x 55mm x 18mm
- Input voltage - max. 24V AC / DC
- Max. Cross-section of the terminals - 1.5mm²
- Max. Power of terminals - 12A
- Fuse value - 5x20mm 0.5A average orders

* Please note that the fuse distributor can not provide full protection of life and limb. Only properly applied and dimensioned the risk of a cable fire is reduced.

16.99 EUR^*

Art.-no. Schoenwitz_50186

Schönwitz

The fuse distributor offers you 4 separate and protected circuits. Protect your model railway and separate different supply areas (signals / points / lighting / traction current). In case of an error, the chance of a cable fire * is reduced and you can find the source of the error faster. Without your model train failing in one fell swoop.

The four status LEDs provide an overview at all times of whether the fuse has tripped and the output is supplied with power.

These are electronic PTC fuses that break the circuit when 1A is exceeded and automatically close the circuit again if it falls below 0.5A.

Technical specifications:
- number of storm circuits - 4
- Dimensions (L x W x H) - 65mm x 55mm x 13mm
- Input voltage - max. 24V AC / DC
- Max. Cross-section of the terminals - 1.5mm²
- Max. Power of terminals - 12A
- Fuse rating type PTC fuse - 1A tripping current, 0.5A holding current

* Please note that the fuse distributor can not provide full protection of life and limb. Only properly applied and dimensioned the risk of a cable fire is reduced.