N-Scale 09/2023: Industrial machines, Dapol, Tomix, Microace

19.99 EUR^*

Art.-no. MU_N-A50405

Modellbahn Union

Ready-made model of a switch panel in a highly detailed Art Deco design. Suitable for our machine house MU_N-i00070 or suitable for our other industrial and colliery buildings.

14.99 EUR^*

Art.-no. MU_N-A50423

Modellbahn Union

Finished model of a steam-powered double piston compressor. The compressor was used in mines to generate compressed air to drive equipment underground. Due to the risk of explosion, the use of electrical devices was not permitted there.

11.99 EUR^*

Art.-no. MU_N-A50434

Modellbahn Union

Ready-made model of a mercury vapor direct current converter suitable for our industrial and colliery buildings.

A mercury vapor rectifier is a historical design of a gas discharge tube, which is operated as a rectifier and converts supplied alternating current or three-phase alternating current into direct current. The mercury vapor rectifier was developed by Peter Cooper-Hewitt in 1902 and was widely used in industry until the early 1970s (Q:Wikipedia)

14.99 EUR^*

Art.-no. MU_N-A50437

Modellbahn Union

Ready-made model of a Leonard converter to match our industrial and colliery buildings.

The Leonard converter is also called the Ward-Leonard converter after its inventor, the American electrical engineer Harry Ward Leonard. It consists of a converter (which converts three-phase current into a variable direct voltage) and a direct current motor connected to it. Until the development of power semiconductors such as thyristors, the Leonard theorem was the only way to realize large variable-speed drives that were fed with three-phase current (Q: Wikipedia).

14.99 EUR^*

Art.-no. MU_N-A50497

Modellbahn Union

Finished model of an Ilgner converter suitable for our industrial and colliery buildings.

The Ilgner converter, named after its inventor Karl Ilgner, is based on the same principle as the Leonard converter (MU_N-A50437). Its special feature is simply a large flywheel that is coupled to the three-phase motor. This flywheel stores kinetic energy that can be used in various ways.

19.99 EUR^*

Art.-no. MU_N-A50609

Modellbahn Union

Finished model of a mining machine that is used to operate the winding tower of a mine. Suitable for our mine construction kits.

354.90 EUR (RRP*)

179.99 EUR^*

Art.-no. Fleischmann_732176

Fleischmann

Strukton Rail electric locomotive “Nicole” (ex NS 1824).

- Filigree design of the pantographs
- Variant with air conditioning
- Finely detailed model with separately attached plug-in parts
- Switchable head/tail light with DIP switch

In May 2019, Strukton acquired its first electric locomotive. A locomotive from the former 1600/1800 series of the Dutch Railways (NS). The company number at the time was 1824. After a thorough overhaul and repainting, she was christened “Nicole”. It is currently regularly used to transport machinery and infrastructure materials to support work on the Dutch tracks.
Strukton's goal is to equip the electric locomotives with batteries so that they can drive independently on routes without overhead lines. Work planning for the renovation is currently underway.

Company number: 1824

219.99 EUR^*

Art.-no. Dapol_2D-019-013

Dapol

Four-part multiple unit consisting of a Class 43 diesel locomotive, a non-motorized control car and two passenger cars.

Equipped with:
- Flywheel
- Dapol Super Creep Engine
- Digital interface
- Light change based on the British model
- prepared for interior lighting
- NEM coupling mounts
- Standard N couplings
- optionally mountable claw couplings

219.99 EUR^*

Art.-no. Dapol_2D-019-014

Dapol

Four-part multiple unit consisting of a Class 43 diesel locomotive, a non-motorized control car and two passenger cars.

Equipped with:
- Flywheel
- Dapol Super Creep Engine
- Digital interface
- Light change based on the British model
- prepared for interior lighting
- NEM coupling mounts
- Standard N couplings
- optionally mountable claw couplings

89.99 EUR^*

Art.-no. Tomix_2252

Tomix

equipped with:
- Engine
- Flywheel
- traction tires
- Light change
- Accessories and various number plates
- Standard N couplings
- optionally retrofittable claw couplings
- Train direction signs

99.99 EUR^*

Art.-no. Tomix_2253

Tomix

equipped with:
- Engine
- Flywheel
- traction tires
- Light change
- Accessories and various number plates
- Standard N couplings
- optionally retrofittable claw couplings
- Train direction signs

22.99 EUR^*

Art.-no. Tomix_8749

Tomix

equipped with:
- Standard N couplings

289.99 EUR^*

Art.-no. Tomix_98825

Tomix

equipped with:
- Engine
- Flywheel
- Light change
- electrically conductive close couplings

193.99 EUR^*

Art.-no. Tomix_98826

Tomix

Additional set for the limited express train JNR 485 (Hitachi).

269.99 EUR^*

Art.-no. Tomix_98828

Tomix

equipped with:
- Engine
- Flywheel
- Light change
- electrically conductive close couplings

189.99 EUR^*

Art.-no. Tomix_98829

Tomix

equipped with:
- Engine
- Flywheel
- Light change
- electrically conductive close couplings

112.99 EUR^*

Art.-no. Tomix_98830

Tomix

Expansion set for the JR E217 series suburban train (8th edition/updated car).

213.99 EUR^*

Art.-no. Kato_10-1805

Kato

The old Takasaki Depot passenger car formation set, used as an event train during the EF55 revival, is now available as a model. When the EF55 was put back into service in 1986, some of the old passenger cars still in existence were collected at the Kawasaki Passenger Car Depot (now Gunma Car Center) and used as event trains on the EF55 main line.

189.99 EUR^*

Art.-no. Microace_A1075

Microace

Contents: 3-piece train set equipped with:
- Engine
- Flywheel
- Light change
- Standard N couplings

34.99 EUR^*

Art.-no. Microace_A1258

Microace

Container wagon without containers. 2 parts

319.99 EUR^*

Art.-no. Microace_A2274

Microace

6-part electric multiple unit equipped with:
- Engine
- Flywheel
- Light change
- Standard N couplings

35.99 EUR^*

Art.-no. Microace_A3150

Microace

Set of two trolleys equipped with standard N couplings

15.99 EUR^*

Art.-no. Microace_K0001

Microace

5-piece container set

37.99 EUR^*

Art.-no. Tomytec_317500

Tomytec

Contents:
- Isuzu Giga high roof (current model) Wing Van
- 2 forklifts
- Cargo loading area
- Cardboard boxes
- empty palette
- Figure (field worker/forklift driver)
- Background printed on both sides

57.99 EUR^*

Art.-no. Tomytec_322269

Tomytec

Standing model of a tram, the original is scheduled to go into operation in August 2023 in Utsunomiya, the administrative headquarters of the Japanese prefecture of Tochigi, and will connect the eastern exit of the train station there across the Kinugawa River with the Takenezawa Industrial Park in the city of Haga over a distance of 14.6 kilometers. The HU300 type is characterized by its streamlined design and striking yellow paintwork. Pack complete with a special stop based on the original.

The model can be powered with the TM-LRT04 chassis.

49.99 EUR^*

Art.-no. Tomytec_322276

Tomytec

Tram modeled on Hiroshima, printed with the design of the Hiroshima Symphony Orchestra. The original has been running in Hiroshima since April 2023. Can be motorized with article 979054. The pantographs are set up in a fixed manner. Interchangeable with item 972840.

26.80 EUR^*

Art.-no. Artitec_316.083

Artitec

Artitec prefabricated models are handcrafted from resin and etched metal parts. Each model is hand-painted and sometimes slightly weathered. Our models are all unique collectibles.

27.80 EUR^*

Art.-no. Artitec_6160085

Artitec

Artitec prefabricated models are built by hand from resin and photo-etched parts. Each model is hand painted and sometimes slightly aged. The models are of high collector's quality.

5.22 EUR^*

Art.-no. Busch_1690

Busch

The high-tech cleaning ­compound!
Dirt absorbing High-Tech cleaning material
Ideal for cleaning models, collectors items, etc.
Removes dirt and dust and eliminates 99.999% of bacteria*
Cleans every nook and cranny of model surface
Removes grime from tracks and improves the current pick-up
Leaves no deposit behind

Universal application. Do not rub, just press carefully!

Model Cleaner - neat and simple to use:
Just simply roll over, or press gently and the dirt is gone! Gently dab on delicate parts!

Just give it a try:
Simply press or roll over the surface (do not wipe!). The dirt and dust will easily be absorbed and locked in. A membrane in the Cyber Clean® itself will not allow the dust to be re-deposited elsewhere. Bugs and germs are also removed at the same time (disinfection action).

The perfect way to clean any model:
Cyber Clean® moulds itself into every nook, cranny and crevice of the model surface and »sucks« the dust and dirt away. In comparison to cleaning with a brush or cloth, the dirt is not brushed off, but simply absorbed into the mass of the material. This makes it the ideal way to clean roofs of model houses, streets, etc.

Suitable for all surfaces:
Cyber Clean® leaves no deposit behind, which makes it suitable for use on any surface, whether it´s wood, plastic or cardboard, for example the latest generation of laser-cut models. Cyber Clean® contains alcohol, which will remove grime from tracks or slot-car raceways enhancing the current pick-up. Cyber Clean® is also handy for cleaning keyboards (computers, mobiles, etc.), electrical equipment (CD player, etc.), air ventilation grills (car dashboards), leaves on plants and other toys.

Important to know:
Cyber Clean® is useable many times until it is full up (compare the color scale on the packing). Cyber Clean® can dry out if left in the open air – therefore after use, store it in the re-sealable packing. Cyber Clean® is not a fleck remover. Before using on valuable products, try it out first on a part which will not be seen. Cyber Clean® is made of environmentally friendly material and is biologically degradable. In principle, Cyber Clean® is not harmful, however, it is not a toy and, like all cleaning products, should be kept away from access by children.

Cyber Clean® Model Cleaner is exklusively produced for Busch.

* Tested after EN 1040, EN 1275 & EN 13697. Staphylococus aureus, Pseudomanas aeruginosa, Escherichia coli, Candida albicans (99.999%) & Aspergillus niger (99%).

31.46 EUR^*

Art.-no. Woodland_WFS640

Woodland Scenics

The Model-Vac has the perfect strength for picking up loose landscaping material, yet it doesn't leave any sticky residue behind. This cordless modeling vacuum features an ergonomic design and can reach even small areas. The Model-Vac is easy to empty and doesn't damage excess material, so it can be reused.

Not included!: 9V battery