Our product palette at 1 view
N-Scale 08/2023: Mine, Micromotor
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
39.99 EUR*
Art.-no. MU_N-i00075
Modellbahn Union
Mine ventilators are ventilators used in mining to ventilate a mine. Our model includes 2 "chimneys" (the diffusers), 2 covered fans (unpainted), an engine building, and two racks of weather channel sliders.
29.99 EUR*
Art.-no. MU_N-i00076
Modellbahn Union
The boiler hall is the building in which the steam boilers for driving the machines are located in the machine house (MU_N-i00070). For safety reasons, a location in a separate building was a preferred solution. The building can be equipped with an interior (MU_N-i00077). A matching chimney is MU_N-i00039.
19.99 EUR*
Art.-no. MU_N-i00077
Modellbahn Union
Interior design for the boiler hall (MU_N-i00076). 3 steam boilers with accessories (unpainted).
79.99 EUR*
Art.-no. MU_N-i00066
Modellbahn Union
Hanging bench is an old mining term. In pre-industrial mining, after the transition to underground mining, ore was hauled to the surface from simple winch shafts. Baskets, barrels or buckets made of wood were used as conveyor vessels. These were "attached" to the hoisting cable underground and set down above ground in order to "knock them off" the cable again. The hanging bench with its winding tower is inspired by those in the former Zollern and Minister Achenbach colliery. The steel and brick design of the hanging bench is typical of architecture around 1900. The model has three unloading points located under the building. The building itself stands on steel columns, giving the whole an open, non-solid appearance. With its airy steel construction, the winding tower is a typical example of a strut framework that can still be seen in many places. Our model has a movable sheave.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
39.99 EUR*
Art.-no. MU_N-i00067
Modellbahn Union
With its airy steel construction, the winding tower is a typical example of a strut framework that can still be seen in many places. Our model has a moveable sheave and can be used as part of a colliery or as an industrial monument on its own.
59.99 EUR*
Art.-no. MU_N-i00070
Modellbahn Union
Machine house for our winding tower (MU_N-i00066) in Art Nouveau style. The building is based on the machine house of the Zollern colliery and is a real eye-catcher with its steel construction and stained glass windows. The interior offers countless opportunities for extensive furnishing. It is possible to install a geared motor.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
With the extension set MU_N-i00071, the hanging bench and machine house can be coupled and motorized.
29.99 EUR*
Art.-no. MU_N-i00071
Modellbahn Union
Set with base plate, geared motor and thread. With this set, the hanging bench (MU_N-i00066) and the machine house (MU_N-i00070) can be coupled and motorized.
239.00 EUR
(RRP*)
149.99 EUR*
Art.-no. Piko_40350
Piko
The model of the legendary E-Lok BR E16 impresses with a harmonious livery and printing as well as precise case engraving and an exact detail of the striking Buchli drives. In addition, the PIKO BR 116 has fine spoke wheel sets, which contribute to the model's authentic overall impression with its filigree roof equipment, pantographs and extra attached handle bars. The locomotive has excellent running characteristics and high tractive forces for faithful train compositions. The model is equipped with a modern Next18 interface and shows the usual light change red / white. The PIKO model exactly matches its model in form, color and printing.
284.90 EUR
(RRP*)
199.99 EUR*
Art.-no. Jaegerndorfer_JC75030
Jägerndorfer
2-piece set 5045, Ep. IV
-Three-light headlights
- 3-window front with low roof and half-windows
- Model with light change
- Control car with 6-pin interface
-Three-light headlights
- 3-window front with low roof and half-windows
- Model with light change
- Control car with 6-pin interface
384.90 EUR
(RRP*)
299.99 EUR*
Art.-no. Kato_10-1658
Kato
The Thalys PBKA is a European high-speed train that connects France, the Netherlands, Germany and Belgium.
The multiple units are based on the TGV POS and belong to the SNCB and SNCF.
The ten-car multiple unit from Kato appears in the current Thalys design.
The typical WiFi antennas can be found on the roofs of intermediate cars 2 and 7.
The Thalys will be capable of double traction and will be equipped with the new coupling between the power cars and the first intermediate car.
Model features:
- Detailed execution
- Light change white / red
- NEM651 interface
- 5-pole motor with flywheels
- WiFi antennas on two intermediate cars
- Prepared for interior lighting K11213 / K11214
- Capable of double traction
- Limited edition
The multiple units are based on the TGV POS and belong to the SNCB and SNCF.
The ten-car multiple unit from Kato appears in the current Thalys design.
The typical WiFi antennas can be found on the roofs of intermediate cars 2 and 7.
The Thalys will be capable of double traction and will be equipped with the new coupling between the power cars and the first intermediate car.
Model features:
- Detailed execution
- Light change white / red
- NEM651 interface
- 5-pole motor with flywheels
- WiFi antennas on two intermediate cars
- Prepared for interior lighting K11213 / K11214
- Capable of double traction
- Limited edition
139.99 EUR
(RRP*)
99.99 EUR*
Art.-no. Kato_3102
Kato
- Alpine locomotive Ge4/4-II
- Prototype of the current appearance with square lights and jumper plugs on the front
- Unit 618, bearing a large RhB logo, is the nickname on the side of the car body
- Symbol brand and company name are also reproduced true to the original
- Accurately reproduces the curved body and large windows.
- Details of each part such as roof air intake louvers, resistors and large snow plows have also been reproduced
- Jumper plug on the front of the car body is set as an attached part
- The power is capable of pulling 12 Rhaetian Railway passenger carriages on a 4% incline
- DCC can be handled by replacing the light board
- Hyoga close coupling standard equipment for Express. Includes replacement Arnold clutch
- All 3 headlights light up (bulb color)
- Minimum clearance radius: R150
- Accessories: jumper x 1, spare Arnold coupler x 2
In the summer of 2022, KATO will be launching numerous RhB freight and refrigerated wagons from the companies Coop and Swiss Post in various versions, thus expanding its large Rhaetian Railway range with additional freight wagons. KATO item no. 3102, still number: 7074047
- Prototype of the current appearance with square lights and jumper plugs on the front
- Unit 618, bearing a large RhB logo, is the nickname on the side of the car body
- Symbol brand and company name are also reproduced true to the original
- Accurately reproduces the curved body and large windows.
- Details of each part such as roof air intake louvers, resistors and large snow plows have also been reproduced
- Jumper plug on the front of the car body is set as an attached part
- The power is capable of pulling 12 Rhaetian Railway passenger carriages on a 4% incline
- DCC can be handled by replacing the light board
- Hyoga close coupling standard equipment for Express. Includes replacement Arnold clutch
- All 3 headlights light up (bulb color)
- Minimum clearance radius: R150
- Accessories: jumper x 1, spare Arnold coupler x 2
In the summer of 2022, KATO will be launching numerous RhB freight and refrigerated wagons from the companies Coop and Swiss Post in various versions, thus expanding its large Rhaetian Railway range with additional freight wagons. KATO item no. 3102, still number: 7074047
129.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Lemke_LC66305
Lemke
Jägerndorfer Collection exclusively at Lemke
Self-unloading wagons for mountain transport. The rock that accumulates during coal mining underground is referred to as mountains or wash mountains. These mountains were transported at RAG Bahn - Hafen with special FAL wagons.
Self-unloading wagons for mountain transport. The rock that accumulates during coal mining underground is referred to as mountains or wash mountains. These mountains were transported at RAG Bahn - Hafen with special FAL wagons.
12.99 EUR*
Art.-no. Dapol_2F-071-075
Dapol
Equipped with:
- NEM shaft
- Standard N couplings
- Optionally usable claw couplings
- removable cargo
- NEM shaft
- Standard N couplings
- Optionally usable claw couplings
- removable cargo
10.99 EUR*
Art.-no. Dapol_2F-071-074
Dapol
Equipped with:
- NEM shaft
- Standard N couplings
- Optionally usable claw couplings
- removable cargo
- NEM shaft
- Standard N couplings
- Optionally usable claw couplings
- removable cargo
29.99 EUR*
Art.-no. MicromotorEU_NM022G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 98.3, PtL 2/2, KPEV T2, ÖBB 688, Glaskasten, Saxonia models.
Replaces engines 41 2015 04 & 41 2606 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S060 Minitrix glass box MU v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11009, 11012, 11015, 11020, 11021, 11074, 11075, 11087, 11102, 11617, 12004, 12005, 12011, 12015, 12016, 12017, 12 114, 12212, 12241, 12256, 12430, 12606, 12714
Replaces engines 41 2015 04 & 41 2606 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S060 Minitrix glass box MU v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11009, 11012, 11015, 11020, 11021, 11074, 11075, 11087, 11102, 11617, 12004, 12005, 12011, 12015, 12016, 12017, 12 114, 12212, 12241, 12256, 12430, 12606, 12714
29.99 EUR*
Art.-no. MicromotorEU_NM052
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix F7A model (B&O, Canadian National, Canadian Pacific, Conrail, Pennsylvania, Santa Fe, Union Pacific).
Replaces engine.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S005 Minitrix E10 1309 engine MU v1
- 2x shaft adapter A16 10->12 6 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 2901, 2907, 2921, 2948, 2951, 2956, 2957, 2957, 2961, 2967, 2971, 2991, 2997, 12957
Replaces engine.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S005 Minitrix E10 1309 engine MU v1
- 2x shaft adapter A16 10->12 6 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 2901, 2907, 2921, 2948, 2951, 2956, 2957, 2957, 2961, 2967, 2971, 2991, 2997, 12957
29.99 EUR*
Art.-no. MicromotorEU_NM053C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix BR 120 model (old motor / old motor).
Replaces engine 41 2644 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A29 10->15 29 mm
- 2x snail W0.4-5-6
- 2x flywheel mass F007
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11416, 11423, 12133, 12209, 12502, 12637, 12642, 12644, 12648, 12649, 12655, 12656, 12864
Replaces engine 41 2644 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A29 10->15 29 mm
- 2x snail W0.4-5-6
- 2x flywheel mass F007
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11416, 11423, 12133, 12209, 12502, 12637, 12642, 12644, 12648, 12649, 12655, 12656, 12864
29.99 EUR*
Art.-no. MicromotorEU_NM054C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix BR 120 model (New motor / Neue Motor), ÖBB Rh 1012, Hectorrail Litt. 141
Replaces engine E135 508.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x shaft adapter A24 10->15 28 mm
- 2x snail W0.3-4-5
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11150, 11158, 11636, 12169, 12170, 12198, 12345, 12591, 12599, 16023, 16024, 16025, 16991
Replaces engine E135 508.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x shaft adapter A24 10->15 28 mm
- 2x snail W0.3-4-5
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11150, 11158, 11636, 12169, 12170, 12198, 12345, 12591, 12599, 16023, 16024, 16025, 16991
29.99 EUR*
Art.-no. MicromotorEU_NM055C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 103, BR 151, BR 155, BR 750, E 03, DR BR 250 models (models with interface).
Replaces engines 31 2891 05, 41 2891 05, 31 2761 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S031 China Motor MU v1
- 2x shaft adapter A6 10->15 22 mm
- 2x snail W0.4-5-6
- 2x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11425, 11607, 12194, 12434, 12505, 12506, 12514, 12530, 12539, 12590, 12646, 12651, 12756, 12756, 12757, 12761, 12890 , 12891, 12892
Replaces engines 31 2891 05, 41 2891 05, 31 2761 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S031 China Motor MU v1
- 2x shaft adapter A6 10->15 22 mm
- 2x snail W0.4-5-6
- 2x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11425, 11607, 12194, 12434, 12505, 12506, 12514, 12530, 12539, 12590, 12646, 12651, 12756, 12756, 12757, 12761, 12890 , 12891, 12892
29.99 EUR*
Art.-no. MicromotorEU_NM056G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix Class B6, 0-6-0 model (B&O, Canadian National, New Haven, Pennsylvania, Santa Fe, Union Pacific).
Replaces engine 40 0133 00.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S045 Minitrix short MU v1
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-4-5
- 2x brass thread inserts M1.6x2
- 1x screw M1.6x4
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 1047, 51 2018 40, 2080, 2081, 2086, 2087, 2916, 2919, 2927, 2929, 2929, 11047, 12929
Replaces engine 40 0133 00.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S045 Minitrix short MU v1
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-4-5
- 2x brass thread inserts M1.6x2
- 1x screw M1.6x4
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 1047, 51 2018 40, 2080, 2081, 2086, 2087, 2916, 2919, 2927, 2929, 2929, 11047, 12929
29.99 EUR*
Art.-no. MicromotorEU_NM057
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix Adler model.
Replaces engine 41 1028 46.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716S
- 1x motor mount S018 Minitrix small motor MU
- 1x shaft adapter A19 10->12 7 mm
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1010 00, 51 1028 00
Replaces engine 41 1028 46.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716S
- 1x motor mount S018 Minitrix small motor MU
- 1x shaft adapter A19 10->12 7 mm
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1010 00, 51 1028 00
29.99 EUR*
Art.-no. MicromotorEU_NM058C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix BR 648 model, Lint.
Replaces engines E123 277, E147 413.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S019 Flm V110 DR MU v2
- 1x shaft adapter A1 10->15 12 mm
- 1x snail W0.3-3.5-5
- 1x flywheel mass F019
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11134, 12363, 12472, 12585, 12586, 12587, 12588, 12592, 16481, 16482
Replaces engines E123 277, E147 413.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S019 Flm V110 DR MU v2
- 1x shaft adapter A1 10->15 12 mm
- 1x snail W0.3-3.5-5
- 1x flywheel mass F019
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11134, 12363, 12472, 12585, 12586, 12587, 12588, 12592, 16481, 16482
29.99 EUR*
Art.-no. MicromotorEU_NM059G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 92.20 DB, K.Bay.Sts.B. R 4/4.
Replaces engine E127 859.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S019 Flm V110 DR MU v2
- 1x shaft adapter A2 10->15 20 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11631, 12264, 12265, 12416, 12417, 16921
Replaces engine E127 859.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S019 Flm V110 DR MU v2
- 1x shaft adapter A2 10->15 20 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11631, 12264, 12265, 12416, 12417, 16921
Yours sincerely
Daniel Mrugalski
DM-Toys