Our product palette at 1 view
N-Scale 07/2023: Fleischmann, Auhagen, Micromotor
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
319.41 EUR*
Art.-no. Fleischmann_881916
Fleischmann
Car set with four double-decker cars for the Airport Express (FEX) Berlin of the Deutsche Bahn. Consisting of a double-decker carriage 1./2. class, type DABpz 758, two 2nd class bi-level cars, type DBpz 753 and a 2nd class bi-level control car, type DBpbzfa 766.
- Airport Express (FEX) Berlin
- Control car with function decoder for light change white/red in analogue and digital operation
- Lighting of the train destination display can be switched in digital mode (control car)
- Airport Express (FEX) Berlin
- Control car with function decoder for light change white/red in analogue and digital operation
- Lighting of the train destination display can be switched in digital mode (control car)
89.90 EUR
(RRP*)
85.41 EUR*
Art.-no. Fleischmann_6660014
Fleischmann
Wagon set consisting of three sliding tarpaulin wagons, type Shimmns, of the Deutsche Bahn.
- A car with advertising imprint "This is green"
- Ideal for forming block trains
- A car with advertising imprint "This is green"
- Ideal for forming block trains
80.90 EUR
(RRP*)
76.86 EUR*
Art.-no. Fleischmann_825816
Fleischmann
Wagon set with two 4-axle tank wagons, type Zacns, of the GATX.
- Finely detailed design with different car numbers
- With round buffers
The four-axle tank wagons of the type Uahs (from 1980 Zas) with a capacity of 880 hl or 88 m³ built from 1972 onwards were hired out by wagon rental companies at many railway administrations as private wagons [P]. The wagons were used to transport heavy fuel oil and mineral oil products.
- Finely detailed design with different car numbers
- With round buffers
The four-axle tank wagons of the type Uahs (from 1980 Zas) with a capacity of 880 hl or 88 m³ built from 1972 onwards were hired out by wagon rental companies at many railway administrations as private wagons [P]. The wagons were used to transport heavy fuel oil and mineral oil products.
52.15 EUR*
Art.-no. Fleischmann_845608
Fleischmann
Car set with two heavy-duty flat cars, type S, of the Dutch State Railways.
- Loaded with slabs
- Both cars with different car numbers
- Loaded with slabs
- Both cars with different car numbers
29.90 EUR*
Art.-no. Auhagen_44658
Auhagen
kit. The finely detailed and printed model of the Multicar M22 small transporter pulls a filigree long material trailer here in a new color scheme. The enclosed load, consisting of prestressed concrete masts for street lighting, makes the team a good addition to model 14 489 transformer house.
66 x 8 x 12mm
66 x 8 x 12mm
19.90 EUR*
Art.-no. Auhagen_14489
Auhagen
This energy supply building was constructed in a clinker brick style typical of the landscape. Equipped with a transformer inside the prototype, these systems were used to convert the 10 kV of the medium-voltage network to the voltage value of 230/400 V of the local network. The kit, which is easy to assemble due to the room cell design, is supplemented by 9 medium-voltage pylons with a height of 64 mm. original model.
17 x 19 x 51mm
17 x 19 x 51mm
18.49 EUR*
(0.125m², base price 148.23 EUR/m²)
Art.-no. Faller_171801
Faller
Aluminum carrier sheet with photo print for quick, easy and realistic rock design. - Any individual rock shape thanks to the flexible and easy-to-form material. - Filigree rock structures through repeated crumples and unfolds. - Realistic finishes with detailed photo printing. - Dimensionally stable model structure with aluminum lamination. - Dirt-free processing, very low weight, also ideal for small rock surfaces. - Fix & Done - no coloring necessary. Dimensions: approx. DIN A3
18.49 EUR*
(0.125m², base price 148.23 EUR/m²)
Art.-no. Faller_171802
Faller
Aluminum carrier sheet with photo print for quick, easy and realistic rock design. - Any individual rock shape thanks to the flexible and easy-to-form material. - Filigree rock structures through repeated crumples and unfolds. - Realistic finishes with detailed photo printing. - Dimensionally stable model structure with aluminum lamination. - Dirt-free processing, very low weight, also ideal for small rock surfaces. - Fix & Done - no coloring necessary. Dimensions: approx. DIN A3
29.99 EUR*
Art.-no. MicromotorEU_NA039G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Arnold SBB Ee 3/3 model.
Replaces Arnold Motor 2420-010
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 2x motor mounts S043 Arnold Kof 8 mm v1
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 0104CH, 0109, 0160, 0161, 0202CH, 0215, 2420, 2421, 2422, 2422S, 2423, 2423S, 2424, 2425, 2425S, 2426, 2427, 2428, 2431 , HN2013
Replaces Arnold Motor 2420-010
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 2x motor mounts S043 Arnold Kof 8 mm v1
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 0104CH, 0109, 0160, 0161, 0202CH, 0215, 2420, 2421, 2422, 2422S, 2423, 2423S, 2424, 2425, 2425S, 2426, 2427, 2428, 2431 , HN2013
29.99 EUR*
Art.-no. MicromotorEU_NA040G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold GT 6, tram, streetcar model.
Replaces Arnold Engine 2977-012
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 1x shaft adapter A10 10->15 7 mm
- 1x snail W0.3-3.5-5
- 1x cardan coupling SP002A
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2975, 2976, 2977, 2978, 8 2978, 2979, 2980, 2981, 2982, 2984, 2985, 2986, 2987, 2988, 2989, 2990, 8 2990, 2991, 8 299 1, 2992, 8 2992, 72983, 82983
Replaces Arnold Engine 2977-012
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 1x shaft adapter A10 10->15 7 mm
- 1x snail W0.3-3.5-5
- 1x cardan coupling SP002A
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2975, 2976, 2977, 2978, 8 2978, 2979, 2980, 2981, 2982, 2984, 2985, 2986, 2987, 2988, 2989, 2990, 8 2990, 2991, 8 299 1, 2992, 8 2992, 72983, 82983
29.99 EUR*
Art.-no. MicromotorEU_NA041C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Arnold BR 111 model.
Replaces Arnold Motor 2363-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A7 10->15 15 mm
- 1x shaft adapter A25 10->15 18 mm
- 1x snail W0.4-5-6
- 1x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2440, 8 2440
Replaces Arnold Motor 2363-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A7 10->15 15 mm
- 1x shaft adapter A25 10->15 18 mm
- 1x snail W0.4-5-6
- 1x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2440, 8 2440
29.99 EUR*
Art.-no. MicromotorEU_NA042F
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold E 03, BR 103, BR 127, BR 152, BR 750, RENFE / AVE / ARCO S 252, CP LE 5600 models.
Motor with flywheels and hose coupling
Replaces Arnold Motor 2435-014
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S035 Arnold standard MU v2
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F016
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold Nos. 2370, 8 2370, 2371, 8 2371, 2372, 8 2372, 2373, 2374, 2390, 2391, 2392, 8 2392, 2393, 8 2393, 2432, 8 2432, 2433, 243 4, 2435, 8 2435 , 2436, 2488, 2489, 2494, 2495, 8 2495, 2496, 8 2496, 2497, 2497, 8 2497, 8 2497, 2498, 2499, 8 2499
Motor with flywheels and hose coupling
Replaces Arnold Motor 2435-014
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S035 Arnold standard MU v2
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F016
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold Nos. 2370, 8 2370, 2371, 8 2371, 2372, 8 2372, 2373, 2374, 2390, 2391, 2392, 8 2392, 2393, 8 2393, 2432, 8 2432, 2433, 243 4, 2435, 8 2435 , 2436, 2488, 2489, 2494, 2495, 8 2495, 2496, 8 2496, 2497, 2497, 8 2497, 8 2497, 2498, 2499, 8 2499
29.99 EUR*
Art.-no. MicromotorEU_NF057G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann DB BR 98.8, K.Bay.Sts.B. GTL 4/4.
Replaces Fleischmann engine #50709904.
The locomotive is not included in the scope of delivery.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716S
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-3-5.5
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 709904, 709905
Replaces Fleischmann engine #50709904.
The locomotive is not included in the scope of delivery.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716S
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-3-5.5
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 709904, 709905
29.99 EUR*
Art.-no. MicromotorEU_NM047C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix SBB Em 3/3.
Replaces engine 41 2060 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 1x motor mount S018 Minitrix small motor MU
- 1x shaft adapter A22 10->15 10 mm
- 1x flywheel mass F019
- 1x snail W0.3-3.5-5
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11464, 12060, 12871, 12872, 71093
Replaces engine 41 2060 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 1x motor mount S018 Minitrix small motor MU
- 1x shaft adapter A22 10->15 10 mm
- 1x flywheel mass F019
- 1x snail W0.3-3.5-5
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11464, 12060, 12871, 12872, 71093
29.99 EUR*
Art.-no. MicromotorEU_NM048G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix US U30CG (Santa Fe, Amtrak, Burlington Northern, Penn Central).
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A21 10->15 14 mm
- 1x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 51 2010 00, 51 2012 00, 51 2016 00, 51 2049 00, 51 2050 00
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A21 10->15 14 mm
- 1x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 51 2010 00, 51 2012 00, 51 2016 00, 51 2049 00, 51 2050 00
29.99 EUR*
Art.-no. MicromotorEU_NM049G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix DB VT 75.9, DRG VT 135.
Replaces engine 31 2091 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 51 2090 00, 51 2093 00, 12090, 12093, 12313, 12388, 12528
Replaces engine 31 2091 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 51 2090 00, 51 2093 00, 12090, 12093, 12313, 12388, 12528
29.99 EUR*
Art.-no. MicromotorEU_NM050G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 193, E 93.
Replaces engine 41 2917 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A22 10->15 10 mm
- 2x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 12917, 12918
Replaces engine 41 2917 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A22 10->15 10 mm
- 2x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 12917, 12918
29.99 EUR*
Art.-no. MicromotorEU_NM051G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix LAG 895, DRG ET 194.1, freight railcar.
Replaces engine 41 2853 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1015D
- 2x shaft adapter A8 10->15 4.5 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 12853, 12854
Replaces engine 41 2853 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1015D
- 2x shaft adapter A8 10->15 4.5 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 12853, 12854
19.99 EUR*
Art.-no. RAILNSCALE_N2326
RAILNSCALE
About the original: The Ford Transit (1965-1978) was made in the United Kingdom, Belgium and Turkey. The available versions are the model years 1965-1970.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
19.99 EUR*
Art.-no. RAILNSCALE_N2327
RAILNSCALE
About the original: The Ford Transit (1965-1978) was made in the United Kingdom, Belgium and Turkey. The available versions are the model years 1965-1970. This detailed model comprises an open side door.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
Yours sincerely
Daniel Mrugalski
DM-Toys