N-Scale 06/2023: MUFlex, half-relief houses, Hobbytrain

14.99 EUR^*

Art.-no. MU_N-H00238

Modellbahn Union

The café is a half-relief half-timbered house with a facade mainly made of wood. The wood is detailed, engraved with symbols and text.

9.99 EUR^*

Art.-no. MU_N-L00290

Modellbahn Union

Landscaping has finally become truly flexible. Almost every corner, bend and bulge can be covered with MU Flex. The material is processed with our Ultra Glue or contact adhesive. The material is gray (elephant grey) from the factory and can be painted with acrylic and enamel paints. A standard sheet has the format 175 x 270 x 2mm.

69.80 EUR (RRP*)

39.99 EUR^*

Art.-no. Fleischmann_830311

Fleischmann

Wagon set with two grain silo wagons, type Tgpps, of the Swiss Federal Railways.

- Finely detailed models with separately attached plug-in parts
- Filigree walkways
- Fine stage railings
- With different car numbers

78.21 EUR^*

Art.-no. Hobbytrain_H23440

Hobbytrain

In 1975, the SBB placed an order with the Swiss Schindler Waggon AG to build 100 four-axle sliding wall wagons. While the concept with the four-part sliding walls was retained, the entire construction turned out to be a lot stronger than that of the previous models built in France.

42.90 EUR (RRP*)

25.99 EUR^*

Art.-no. Hobbytrain_H23441

Hobbytrain

In 1975, the SBB placed an order with the Swiss Schindler Waggon AG to build 100 four-axle sliding wall wagons. While the concept with the four-part sliding walls was retained, the entire construction turned out to be a lot stronger than that of the previous models built in France.

86.90 EUR (RRP*)

49.99 EUR^*

Art.-no. Hobbytrain_H23442

Hobbytrain

In 1975, the SBB placed an order with the Swiss Schindler Waggon AG to build 100 four-axle sliding wall wagons. While the concept with the four-part sliding walls was retained, the entire construction turned out to be a lot stronger than that of the previous models built in France.

42.90 EUR (RRP*)

25.99 EUR^*

Art.-no. Hobbytrain_H23443

Hobbytrain

In 1975, the SBB placed an order with the Swiss Schindler Waggon AG to build 100 four-axle sliding wall wagons. While the concept with the four-part sliding walls was retained, the entire construction turned out to be a lot stronger than that of the previous models built in France.

78.21 EUR^*

Art.-no. Hobbytrain_H23444

Hobbytrain

The German railway company Railadventure specializes in the transfer of new vehicles from the manufacturer to the customer or to the two large test centers. Numerous sliding wall wagons of the Habfis type are used as coupling wagons and protection wagons.

88.90 EUR (RRP*)

39.99 EUR^*

Art.-no. Hobbytrain_H23445

Hobbytrain

The Bulgarian company Pimk Rail was founded in 2005 and their brightly colored blue freight cars have been seen all over Europe's railways ever since. Pimk Rail took over several four-axle sliding wall wagons of the Habis type from Hungary. The wagons were partly built in the mid-1970s and entered service with SNCB, where they ran for Danzas or Cargowaggon for a long time before finding their way to Hungary and now Bulgaria.

79.99 EUR^*

Art.-no. Kato_10-706-3

Kato

The water tender is a water tank wagon that was used to support long-distance traffic with few water intake points after the complete abolition of the steam locomotive by loading the water that is essential for the operation of steam locomotives. This product is a two car set that reproduces the specification with a large star studded flag shield on the side and the normal specification of the Union Pacific Railway Water Tender.

·Knuckle coupling as standard
·Body designation is printed

249.99 EUR^*

Art.-no. Kato_10-706-4

Kato

Car 1: Power Car #207 – Refit (Powered Engine)
Car 2: Budd 10-6 Sleeper #202 - "Willie James"
Car 3: Museum car #5779 - "Promontory" with American flag
Car 4: Dome Coach #7001 - "Colombine"
Coach 5: Coach #5473 - "Portland Rose"
Car 6: Dome Diner #8008 - "City of Portland"
Car 7: Company Car No. 119 - "Kenefick"

The minimum radius is the R282 curve

437.39 EUR (RRP*)

349.99 EUR^*

Art.-no. Kato_126-4014

Kato

Model Features:
- Articulated frame for 282 mm (11") radius curves
- An all new synchronized coreless dual motor drive that combines the power of two individual motors!
- Illuminated deck mounted searchlight.
- Modern" excursion design after 2021!
- Exquisitely sculpted details recreating the distinct and extensive piping details that run the full length of the boiler.
- The metal frame and the additional weights in the body details ensure precise balance and unparalleled traction.
- Electrical pantograph on both body and tender for unmatched electrical reliability.
- digital and sound version also available in the future

379.99 EUR^*

Art.-no. Microace_A1030

Microace

Contents: 8-piece train set
equipped with:
- Engine
- traction tyres
- Light change white-red
- movable pantograph
- Standard N couplings

219.99 EUR^*

Art.-no. Microace_A6392

Microace

equipped with:
- Headlights, taillights, front display lighting. LED insert
- Equipped with drive unit with flywheel
- The car number is attached to the side of the passenger door. with SR antenna
- Current appearance with car number affixed to the side of the passenger door
- The current appearance with the SR antenna installed on the upper car roof
- Target sticker

189.99 EUR^*

Art.-no. Microace_A8506

Microace

89.99 EUR^*

Art.-no. Tomix_7171

Tomix

equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings

89.99 EUR^*

Art.-no. Tomix_7172

Tomix

equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings

16.99 EUR^*

Art.-no. Tomix_8750

Tomix

equipped with:
- Standard N couplings

349.99 EUR^*

Art.-no. Tomix_97954

Tomix

Complete formation set with 10 cars. Reproduces the J66 formation of the E2-1000 series in the color of the 200 series.

23.99 EUR^*

Art.-no. Tomytec_324539

Tomytec

Finished model plug-in kit. Dimensions per building: 50 x 60 x 55 (LWH in mm)

23.99 EUR^*

Art.-no. Tomytec_324546

Tomytec

Finished model plug-in kit. Dimensions per building: 60 x 55 x 65 (LWH in mm)

19.95 EUR (RRP*)

17.96 EUR^*

Art.-no. Viessmann_1897

Viessmann

Train destination indicator of epochs IV - V with double-sided display. Maintenance-free thanks to LED lighting. Can under the platform roof or sideways, z. B. be mounted on a mast. Prefabricated paper sheets for labeling are included. On our website www.viessmann-modell.de you can also create your own label. Dimensions: L 14 x W 4 x H 6 mm.

21.95 EUR (RRP*)

19.76 EUR^*

Art.-no. Viessmann_1898

Viessmann

Train destination displays from epochs V and Vl with a display on both sides. Maintenance-free thanks to LED lighting. Can be installed under the platform roof or on the side, e.g. B. be mounted on a mast. Ready-made sheets of paper for labeling are included. On our website www.viessmann-modell.de you will find a program in the download center with which you can create your own labeling. L 1.4 x W 0.4 x H 0.6 cm.

123.00 EUR^*

Art.-no. Zimo_MS500F

Zimo

Dimensions 14 x 10 x 2.6mm
Motor/total current: 0.7 A (1.5 A peak)
Audio Power: 1W

with 6-pin interface NEM651 on wires, decoder in heat-shrinkable tubing

4 function outputs (2 of which are on the connector, 2 on solder pads), 2 logic level and servo outputs
Equipped with ZIMO features: DCC, MM, SUSI, RailCom, NMRA and ZIMO function mapping, and many more

Loudspeakers of 8 ohms can be used.

desired sound

We would be happy to equip the decoder with your desired sound for an additional charge of EUR 10.
At the top and bottom of this page you will find a desired sound input field. There you will also find a link to the manufacturer's sound projects.
Find the right project and enter the name in the field.
As soon as you add the item to the shopping cart, the desired sound is saved and the price is increased by EUR 10.