N-Scale 06/2023: MU Tank cars, Minitrix, Fleischmann
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
Company number: 3387-7896168-6
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3387-7896174-0
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3380-7899036-7
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3380-7899031-8
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3380-7897237-3
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3380-7897234-0
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3387-7897927-2
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Company number: 3387-7897934-8
The Zafns type articulated tank wagons are used to transport chalk sludge. To allow the sludge to be discharged, the carriage is tilted in the middle towards the discharge valve. The wagons have been in use since the mid-1980s and are operated by various freight wagon operators and railway companies. They are mainly based and registered in Germany, France and Great Britain. The wagons are both suitable for ferry boats and approved for the Channel Tunnel.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
- Claw couplings and dummy couplings are also included and can be fitted as an option
Highlights: Digital sound with many functions
Model: The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white LEDs, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and will work in analogue mode. Attached handlebars. Length over buffers 102 mm.
The elaborately designed locomotive symbolizes the history of the Cottbus vehicle repair from the steam locomotive refurbishment to the most modern plant for complicated maintenance of the ICEs in a special paintwork.
Prototype: Deutsche Bahn AG (DB AG) general-purpose locomotive 218 497-6 in the current version from DB Fahrzeuginstandhaltung GmbH Cottbus, with the Märklin and PIKO company logos below the driver's cab window. Diesel-hydraulic locomotive with roof design to match the MTU 12V 956 TB 11 engine. With parallel exhaust gas ducts and a V-shaped Behr cooling system.
Highlights:
Shape variant
Digital sound with many functions Model: with built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white LEDs, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and work in analogue mode. Attached handle bars.
Length over the buffers 102 mm.
As advertising and cooperation partners, Märklin and PIKO support the 218 497-6 project intensively from the start.
Update!
- For the first time with Next18 interface and LED headlights on both sides
- Fine leading and trailing wheels with open spokes
- Die-cast metal chassis
After the end of World War II, there were 386 machines of the 86 series on West German territory. Most could be repaired, so that in 1952 the DB had 378 locomotives of this series. In addition to the classic branch line trains, the area of responsibility also regularly included the transport of express trains and shunting in freight yards. The last machines retired from operational service at the DB in 1974, designated as the 086 series.
- With 16-BIT SOUND for a perfect sound experience
- Version in traffic red livery
- Model with fine, separately attached plug-in parts
- Rail clearer included
- In digital operation with individually switchable headlights or taillights
- Cab lighting
- Z21 cab available
From 1971, the German Federal Railroad put 398 series 218 locomotives into service and used them in front of both passenger and freight trains. They are used on most non-electrified routes and can reach a top speed of 140 km/h with an output of 1,840 kW. The 218 series has gone through a number of color variants over the years, and traffic red became the standard color from 1997.
Replaces Arnold Motor 2220-030
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 2x motor mounts S043 Arnold Kof 8 mm v1
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
-Arnold 2218-2220, 2225-2228
Replaces Arnold Motor 2235-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A10 10->15 7 mm
- 1x snail W0.3-3.5-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 0166, 8 0166, 2236, 8 2236, 2237, 8 2237
Replaces Arnold Motor 2952-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A4 10->15 12.5 mm
- 1x shaft adapter A16 10->12 6 mm
- 1x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2952, 8 2952, 2953, 8 2953, 2954, 8 2954, 2955
Replaces Arnold Motor 0610-93
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A23 10->12*mm
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2501, 8 2501, 2502, 2503, 8 2503, 2504, 8 2504, 72502, 82502
Replaces Arnold Motor 2520-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A10 10->15 7 mm
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold Nos. 2500, 2520, 8 2520, 2521, 8 2521, 2523, 2525-2527, 8 2527, 2534, 2570, 71003-71004
Replaces Fleischmann engine no. 507370. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S006 flm 16.4 16.4 10 schroeven motor MU v1
- 1x shaft adapter A25 10->15 18 mm
- 1x snail W0.4-4-7
- 2x screw M1.4x4
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 7368 01, 7370, 7370 01, 2009 03
Not suitable for Fleischmann 7368 (SJ Du 2) or 7369 (BR 132 DB). These have motor 507306 and a different auger & different shaft adapters! There is the NF016G conversion kit for this.
Replaces Fleischmann engine no. 507306. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S006 flm 16.4 16.4 10 schroeven motor MU v1
- 1x shaft adapter A7 10->15 15 mm
- 1x snail W0.4-4-7
- 2x screw M1.4x4
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 7305, 7305 01, 7305 81, 7306, 7307, 7811 04, 7812 03, 7812 83
Replaces Fleischmann engine no. 50737101. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0615S
- 1x motor mount S029 Flm BR 98 MU v1
- 1x shaft adapter A28 08->15 10 mm
- 1x snail W0.3-3-5.5
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 7371 01, 7371 02, 7371 04, 7371 05, 7371 06, 7371 71, 7371 72, 7371 84, 7371 85, 7371 86, 7817 01
Replaces Fleischmann engine no. 507260. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 1x shaft adapter A3 10->15 23 mm
- 1x shaft adapter A5 10->15 26 mm
- 2x snail W0.4-4-7
- 1x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann No. 7260, 7260 01, 7260 02, 7260 03, 7260 04, 7260 05, 7260 06, 7260 07, 7260 08, 7260 09, 7260 12, 7260 13, 7260 15, 7260 19, 85 7260, 86 7260, 87 7260, 87 7261 A, 7753, 7753 01, 7753 02, 7753 04, 7819 01, 7819 02, 7819 71, 9310 84
Replaces engines 31 2620 07 and 41 2620 07.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1015D
- 1x shaft adapter A10 10->15 7 mm
- 1x flywheel mass F020
- 1x snail W0.3-3.5-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11106, 11417, 11469, 11485, 12145, 12542, 12581, 12582, 12583, 12584, 12620, 12621, 12622, 12624, 12633, 12733, 1284 2, 12844, 12848, 71000, 71066
Replaces engine 41 2096 04.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 2x shaft adapter A36 10->15 39 mm
- 2x flywheel mass F007
- 2x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 2096, 12096, 12097, 12841
Replaces engine 41 2800 05.
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 1x motor mount S018 Minitrix small motor MU
- 1x shaft adapter A1 10->15 12 mm
- 1x flywheel mass F020
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 12800, 12801, 12802
Das Set ist für einen Bahnübergang mit zwei Schrankenbäumen mit je 65mm ausgelegt. Die Schranke ist ein fein geätzter filigraner und sehr detaillierter Bausatz aus verschieden dicken Neusilberblechen und Messingrohr und muss selber coloriert werden. Bei diesem Bausatz wurde sehr viel Wert auf die Filigranität der einzelnen Teile gelegt. Die Schranke an sich ist beweglich. Der Schrankenbehang faltet sich jedoch nicht beim aufrichten der Schranke zusammen.
Dieser Bausatz ist äußerst filigran und enthält sehr kleine Ätzteile. Wir haben uns große Mühe gegeben, den Zusammenbau so einfach wie möglich zu gestalten, dennoch ist etwas Erfahrung sehr hilfreich. Wir empfehlen zunächst mit einfacheren Bausätzen zu beginnen!
Das abgebildete Zubehör gehört nicht zum Lieferumfang.
(für Modellbau Spur N / Maßstab 1:160)
Yours sincerely
Daniel Mrugalski
DM-Toys