Our product palette at 1 view
N-Scale 04/2023: Tram Special
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
79.99 EUR*
Art.-no. Tomytec_972238
Tomytec
Standing model of a Tatra brand tram, Series T3, Type A. The original was built in the 1960s with around 13,000 units, which were mainly in service in Eastern Europe. The model shows a version from Prague, where these types of trams still operate on the approximately 140-kilometer route network in the Czech capital. The model can also be motorized with item 975981 TM-TR01.
Manufacturer number Tomytec 322238
Manufacturer number Tomytec 322238
79.99 EUR*
Art.-no. Tomytec_972245
Tomytec
Standing model of a Tatra brand tram, T4 series, type B. The original was built in the 1960s with around 13,000 units, which were mainly in service in Eastern Europe. The model shows a version from Leipzig, where the Tatra was in service until the 1980s on the approximately 146-kilometer route network in the Saxon city. The model can also be motorized with item 975981 TM-TR01.
Manufacturer number Tomytec 322245
Manufacturer number Tomytec 322245
179.99 EUR*
Art.-no. Tomytec_975711
Tomytec
Standing model (motorized chassis is included, very easy to assemble!) of white Tatra trams, Series T3, Type C. The original was built in the 1960s with around 13,000 units, which were mainly in service in Eastern Europe. The model shows a version from Prague, where these types of trams still operate on the approximately 140-kilometer route network in the Czech capital. The model can also be motorized with item 975981 TM-TR01, which is included.
Manufacturer number Tomytec 322245
Manufacturer number Tomytec 322245
179.99 EUR*
Art.-no. Tomytec_975728
Tomytec
Standing model (motorized chassis is included, very easy to assemble!) of two Tatra trams, Series T4, Type D. The original was built in the 1960s with around 13,000 units, which were mainly in service in Eastern Europe. The model shows a version from Leipzig, where the Tatra was in service until the 1980s on the approximately 146-kilometer route network in the Saxon city. The model can also be motorized with item 975981 TM-TR01, which is included.
Manufacturer number Tomytec 315728
Manufacturer number Tomytec 315728
49.99 EUR*
Art.-no. Tomytec_971572
Tomytec
Stand model of a triple train of the Nuremberg public transport. The model can be motorized with chassis 978710.
48.45 EUR*
Art.-no. Tomytec_971589
Tomytec
Stand model of a train of three of Mainz transport companies. The model can be motorized with chassis 978710.
69.99 EUR*
Art.-no. Tomytec_978710
Tomytec
Motorized chassis TM-LRT04, for three-way trains, trams. Motorized trolley for the tram stand models with three cars. Wheelbase 118.2 mm, axle distance 12 mm.
26.39 EUR*
Art.-no. Tomix_1789
Tomix
Content: 8 straight tracks, guardrails and connection clips for the roadbed
Description:
- length each 70mm
- with tram style roadbed
Working with the standard Tomix track range and with track from the wide-track series.
Might also be used as double track.
12.69 EUR*
Art.-no. Tomix_1793
Tomix
content: four tracks and connection clips for the roadbed
description: Length 140mm, with tram style roadbed
Working with the standard Tomix track range and with track from the wide-track series. Might also be used as double track.
11.99 EUR*
Art.-no. Tomix_1794
Tomix
Content: 4 straight tracks and connection clips for the roadbed
Description:
- length each 70mm
- with tram style roadbed
Working with the standard Tomix track range and with track from the wide-track series.
Might also be used as double track.
12.49 EUR*
Art.-no. Tomix_1795
Tomix
4 rails with clips, length 103mm 2 X 30° + 2 X 60°
12.49 EUR*
Art.-no. Tomix_1796
Tomix
4 rails with clips, length 143mm 2 X 30° + 2 X 60°
11.99 EUR*
Art.-no. Tomix_1797
Tomix
4 rails with clips, length 177mm 2 X 30° + 2 X 60°
75.00 EUR*
Art.-no. Tomix_91084
Tomix
10 rails with clips + power connection
32.30 EUR*
Art.-no. Tomix_91085
Tomix
8 rails with clips + power connection, 2 x straigth 140 mm + 6 courve length 103mm 2 X 60°
36.40 EUR*
Art.-no. Tomix_91088
Tomix
content: 15 rails with clips
finish: 2x 18,5mm, 4x 37mm, 2x 47,5mm, 2x 70mm, 1x crossing 37mm 90°, 1x curve radius 177mm 60°, 1x curve radius 177mm 30°, 1x curve radius 140mm 60°, 1x curve radius 140mm 30°
125.91 EUR*
Art.-no. Kato_14-804-6
Kato
Kato Hiroden 1000 LRV – one of the most modern N-gauge trams. The Kato model is an articulated tram designed for two-way operation. The vehicle impresses with fine detailing, a clear view of the passenger compartment and a white/red light change. Interior lighting can be retrofitted. Vehicle 1002 wears a colorful floral design.
Model Features:
- Doors on both sides
- Light change white/red
- Free view through the passenger compartment
- Changeable train destination
- fantastic running properties
- Smallest drivable radius: 90 mm
The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (approx. 3V/50mA), it is equipped with two special decoders.
Model Features:
- Doors on both sides
- Light change white/red
- Free view through the passenger compartment
- Changeable train destination
- fantastic running properties
- Smallest drivable radius: 90 mm
The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (approx. 3V/50mA), it is equipped with two special decoders.
105.99 EUR
(RRP*)
69.99 EUR*
Art.-no. Kato_14-805-1
Kato
Tram with motor.
This is a universal tram, without any lettering. The body style is based on the Hiroden 1000 LRT model and the paint job is simple. KATO prides itself on bringing out "My Tram" in a simple style and without any lettering, so you can customize it the way you want it for your layout.
Highlights:
- A tram with a universal design that shows the image of a tram often seen around the world.
- Simple blue color scheme, without stickers and signs.
- Uses the same motor as the Hiroden 1000 LRT engine, which enables smooth and quiet running.
- Working front and rear lighting.
- Minimum radius R90.
- The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (cca 3V / 50mA), it is equipped with two special decoders.
This is a universal tram, without any lettering. The body style is based on the Hiroden 1000 LRT model and the paint job is simple. KATO prides itself on bringing out "My Tram" in a simple style and without any lettering, so you can customize it the way you want it for your layout.
Highlights:
- A tram with a universal design that shows the image of a tram often seen around the world.
- Simple blue color scheme, without stickers and signs.
- Uses the same motor as the Hiroden 1000 LRT engine, which enables smooth and quiet running.
- Working front and rear lighting.
- Minimum radius R90.
- The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (cca 3V / 50mA), it is equipped with two special decoders.
105.99 EUR
(RRP*)
69.99 EUR*
Art.-no. Kato_14-805-2
Kato
Tram with motor.
This is a universal tram, without any lettering. The body style is based on the Hiroden 1000 LRT model and the paint job is simple. KATO prides itself on bringing out "My Tram" in a simple style and without any lettering, so you can customize it the way you want it for your layout.
Highlights:
- A tram with a universal design that shows the image of a tram often seen around the world.
- Simple red color scheme, without stickers and signs.
- Uses the same motor as the Hiroden 1000 LRT engine, which enables smooth and quiet running.
- Working front and rear lighting.
- Minimum radius R90.
- The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (cca 3V / 50mA), it is equipped with two special decoders.
This is a universal tram, without any lettering. The body style is based on the Hiroden 1000 LRT model and the paint job is simple. KATO prides itself on bringing out "My Tram" in a simple style and without any lettering, so you can customize it the way you want it for your layout.
Highlights:
- A tram with a universal design that shows the image of a tram often seen around the world.
- Simple red color scheme, without stickers and signs.
- Uses the same motor as the Hiroden 1000 LRT engine, which enables smooth and quiet running.
- Working front and rear lighting.
- Minimum radius R90.
- The digital conversion of the vehicle is unfortunately extremely extensive and time-consuming. Since the vehicle has two drives and coreless low-voltage motors (cca 3V / 50mA), it is equipped with two special decoders.
29.90 EUR*
Art.-no. Mafen_383002
Mafen
Pedestrian traffic lights:
- true to scale. (1: 160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm in diameter.
- Resistors up to 21 V (direct current) included.
- true to scale. (1: 160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm in diameter.
- Resistors up to 21 V (direct current) included.
49.90 EUR*
Art.-no. Mafen_383003
Mafen
Traffic lights with pedestrian lights:
- true to scale. (1: 160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm in diameter.
- Resistors up to 21 V (direct current) included.
- true to scale. (1: 160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm in diameter.
- Resistors up to 21 V (direct current) included.
21.90 EUR*
Art.-no. Mafen_383004
Mafen
- true to scale. (1:160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
21.90 EUR*
Art.-no. Mafen_383005
Mafen
- true to scale. (1:160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
23.90 EUR*
Art.-no. Mafen_383006
Mafen
- true to scale. (1:160)
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
- "Fine Scale" product
- LED SMD included.
- Brass tube 0.8mm diameter.
- Resistors up to 21 V (direct current) included.
19.99 EUR*
Art.-no. MU_N-A00314
Modellbahn Union
Set with five historical catenary masts with boom (17.5mm). The contact wire hangs at a distance of about 12 mm from the mast.
The highly detailed parts are made of plastic using the 3D printing process and are delivered unpainted. The accessories can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed parts are made of plastic using the 3D printing process and are delivered unpainted. The accessories can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
14.99 EUR*
Art.-no. MU_N-A00315
Modellbahn Union
Set with five historic catenary masts without a boom.
The highly detailed parts are made of plastic using the 3D printing process and are delivered unpainted. The accessories can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed parts are made of plastic using the 3D printing process and are delivered unpainted. The accessories can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-B00018
Modellbahn Union
Dimensions L 28,1 / B 7,0 / H 6,5 cm
Kit made by Lasercut, very high product quality
9.99 EUR*
Art.-no. MU_N-B00136
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, appealing tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, appealing tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00137
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00138
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00139
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00140
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00141
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00142
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
9.99 EUR*
Art.-no. MU_N-B00143
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
7.99 EUR*
Art.-no. MU_N-B00144
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
7.99 EUR*
Art.-no. MU_N-B00161
Modellbahn Union
The road elements are suitable for Minitrix tracks (not included in the delivery). In 3 layers, tracks, switches and crossings are embedded in finished road elements with cobblestone or cobblestone-asphalt structure. The standard width of the street is approx. 54 mm. If necessary, the parts can be shortened and placed next to each other. The control levers of the turnouts can be equipped with Minitrix drives either in the upper or in the lower floor. The laser cut parts are included for both variants.
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
With the Modellbahn Union tram system you can reproduce a complete, attractive tram line in the model. The following bedding elements are now available in cobblestone and asphalt versions:
- Straight 104mm
- Curve radius 1,2,2a and 2b.
- Turnout 30 ° left and right
- Switches 15 ° left and right
- Junction 15 ° and 30 °
4.99 EUR*
Art.-no. MU_N-B00165
Modellbahn Union
Set with 2 x 2 pavement slabs (122x14 / 88x14 mm) suitable for the tram bedding curve R1 (MU_N-B00140 and MU_N-B00157)
4.99 EUR*
Art.-no. MU_N-B00166
Modellbahn Union
Set with 2 x 2 pavement slabs (138x14 / 104x14mm) suitable for the tram bedding curve R2 (MU_N-B00141 and MU_N-B00158)
4.99 EUR*
Art.-no. MU_N-B00167
Modellbahn Union
Set with 2 x 2 pavement slabs (79x14 / 61x14mm) suitable for the tram bedding curve R2a (MU_N-B00142 and MU_N-B00159)
4.99 EUR*
Art.-no. MU_N-B00168
Modellbahn Union
Set with 2 x 2 pavement slabs (87x14 / 70x14 mm) suitable for the tram bedding curve R2b (MU_N-B00143 and MU_N-B00160)
4.99 EUR*
Art.-no. MU_N-B00169
Modellbahn Union
Set with 2 x 2 pavement slabs suitable for the tram bed straight 104mm (MU_N-B00144 and MU_N-B00161)
9.99 EUR*
Art.-no. MU_N-L00247
Modellbahn Union
Modern bus or tram stop with a printed stop sign.
7.99 EUR*
Art.-no. RAILNSCALE_N9009
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create rich details in the pavement. Just press the stamp in the wet clay after you’ve made the pavement with one of our tools. We recommend the air-drying modeling clay of DAS, which we also have in our assortment.This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed stamps are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed stamps are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
16.99 EUR*
Art.-no. RAILNSCALE_N9074
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create tram rails and paved railways. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our assortment.
The roller is 24 mm wide and suitable for 9 mm track. The roller can also be used to role the modelling mass in the proper shape before creating a stone pattern with one of the other rollers from the RAILNSCALE assortment. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
The roller is 24 mm wide and suitable for 9 mm track. The roller can also be used to role the modelling mass in the proper shape before creating a stone pattern with one of the other rollers from the RAILNSCALE assortment. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
12.99 EUR*
Art.-no. RAILNSCALE_N9086
RAILNSCALE
With the “Sidewalk” roller you can easily build paved sidewalks in one go. These pulleys have guide flanges that allow you to create elevated sidewalks of constant height. The rollers are suitable for both straight and slightly curved streets, first you create the pavement and after this step you can roll DAS or Darwi Classic modeling material and print the sidewalk pattern you want in the wet clay.
The roller is 15 mm wide and forms a row structure. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using a 3D printing process and are delivered unpainted.
The roller is 15 mm wide and forms a row structure. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using a 3D printing process and are delivered unpainted.
16.99 EUR*
Art.-no. RAILNSCALE_N9094
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create tram rails and paved railways. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our assortment.
The roller is 24 mm wide and suitable for 9 mm track. With the roller you create a smooth road surface, which is, however, recessed for about 0.5 mm. This allows easier cleaning of the tracks. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
The roller is 24 mm wide and suitable for 9 mm track. With the roller you create a smooth road surface, which is, however, recessed for about 0.5 mm. This allows easier cleaning of the tracks. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
24.99 EUR*
Art.-no. RAILNSCALE_N9532
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create beautiful, custom stone paved streets and tram rails. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our range.
Included in the two-piece set is a 28 mm wide street for ordinary roads and one for 25 mm embedded 9 mm track, which can be used to reproduce a street with an embedded tram track. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rolls are produced from plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
Included in the two-piece set is a 28 mm wide street for ordinary roads and one for 25 mm embedded 9 mm track, which can be used to reproduce a street with an embedded tram track. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rolls are produced from plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
24.99 EUR*
Art.-no. RAILNSCALE_N9535
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create beautiful, custom stone paved streets and tram tracks. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our assortment.
Included in the two-piece set is a 28 mm wide street for ordinary roads and a 22 mm wide embedded 6.5 mm track for recreating a street with an embedded tram track. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
Included in the two-piece set is a 28 mm wide street for ordinary roads and a 22 mm wide embedded 6.5 mm track for recreating a street with an embedded tram track. Instructions in the video
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips.
39.99 EUR*
Art.-no. RAILNSCALE_N9592
RAILNSCALE
With the 1-2-3 rollers, RAILNSCALE goes one step further. With this smart innovation you can easily create beautiful streets. Even multi-track routes are easy to build. Role the air-drying modeling clay in the wet clay. The tracks and flanges of the rollers act as guidance.The set contains three rollers where, for example, a 100 mm wide street with double-track tram.Role the air-drying modeling clay, and print the desired road pattern in the wet clay.The set contains three rollers where, for example, a 100 mm wide street with double-track tram. The rollers are suitable for 9 mm track width with a track spacing of 33.6 ± 0.3 mm. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted.
34.99 EUR*
Art.-no. RAILNSCALE_N9596
RAILNSCALE
With the 1-2-3 rollers, RAILNSCALE goes one step further. With this smart innovation you can easily create beautiful, individual stone paved streets. Even multi-track routes are easy to build. With these rollers you can design highly detailed stone paved streets with tramways with borders and even girder rails. Role the air-drying modeling clay, and print the desired road pattern in the wet clay.
The set contains three rollers where, for example, a 100 mm wide street with double-track tram. The rollers are suitable for 9 mm track width with a track spacing of 33.6 ± 0.3 mm. To facilitate easier rail cleaning the road surface is slightly recessed. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted.
The set contains three rollers where, for example, a 100 mm wide street with double-track tram. The rollers are suitable for 9 mm track width with a track spacing of 33.6 ± 0.3 mm. To facilitate easier rail cleaning the road surface is slightly recessed. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted.
Yours sincerely
Daniel Mrugalski
DM-Toys