Our product palette at 1 view
N-Scale 02/2023: Wheelset cleaning system for locomotives
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
29.99 EUR
(RRP*)
19.99 EUR*
Art.-no. MU_N-G54009
Modellbahn Union
The Gms 54 were the first covered design of the DB from conversions of older cars. The chassis was primarily used from the old wagons. Special production lines had been set up in the AW Fulda and Munich-Freimann for the production. Around 14,100 Gms 54s were built up until the early 1960s. The car bodies were made of synthetic resin panels (after board boarding had initially been considered), the car floor of pine planks, the roof of PIB or PVC plastic. 13,800 cars were redesignated to Gls 205 by 1968 and were given UIC steps and other changes. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987 the stock was still around 4000 cars, which were then gradually retired. Some cars were still used as railway service cars until the 1990s, while others were sold to construction companies by the DB. The model railway Union gauge N models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and different addresses are also taken into account, there are versions with and without a brakeman's platform. All models have short coupling links and NEM coupler pockets. Each company number appears in an edition of 200 copies. The LüP is 6.9 cm per car.
In our DM-Toys blog by Klaus Kosack there are more interesting photos and information!
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
In our DM-Toys blog by Klaus Kosack there are more interesting photos and information!
29.99 EUR
(RRP*)
22.99 EUR*
Art.-no. MU_N-G54118
Modellbahn Union
The Gms 54 were the first covered design of the DB from conversions of older cars. The chassis was primarily used from the old wagons. Special production lines had been set up in the AW Fulda and Munich-Freimann for the production. Around 14,100 Gms 54s were built up until the early 1960s. The car bodies were made of synthetic resin panels (after board boarding had initially been considered), the car floor of pine planks, the roof of PIB or PVC plastic. 13,800 cars were redesignated to Gls 205 by 1968 and were given UIC steps and other changes. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987 the stock was still around 4000 cars, which were then gradually retired. Some cars were still used as railway service cars until the 1990s, while others were sold to construction companies by the DB. The model railway Union gauge N models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and different addresses are also taken into account, there are versions with and without a brakeman's platform. All models have short coupling links and NEM coupler pockets. Each company number appears in an edition of 200 copies. The LüP is 6.9 cm per car.
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
equipped with:
- NEM coupler mounts
- Short coupling backdrop
- Standard N couplings
29.99 EUR*
Art.-no. DM-Toys_4000
DM-Toys
Our top seller in the cleaning sector - get it - you will be amazed!
The special sponge conducts electricity and thus cleans the rotating wheels of locomotives particularly gently. The 2 cables can be connected to the track system or a transformer. The function is therefore guaranteed for both analog and digital locomotives. The locomotive in the picture is not included.
The Tsugawa wheel cleaner is characterized by its electrically conductive sponge, which polishes the locomotive wheels rather than scratching them. Traction tires are not damaged if used properly.
The special sponge conducts electricity and thus cleans the rotating wheels of locomotives particularly gently. The 2 cables can be connected to the track system or a transformer. The function is therefore guaranteed for both analog and digital locomotives. It is very easy to use: Connect the alligator clips to the rail and place the locomotive on the wheel cleaner. The speed can be regulated via the transformer. The locomotive should be held on the wheel cleaner with light pressure.
Replacement pads with item number 4000-1 are available for this item.
Usable length: 18cm
In our DM-Toys blog by Jürgen Plack there are more interesting photos, information and advice on using the Tsugawa pads.
Hans Werner Osburg made a comprehensive test of the various cleaning methods for our blog.
11.99 EUR*
Art.-no. DM-Toys_4000-1
DM-Toys
Replacement pads for item no. 4000 with adhesive strips for easy assembly
In our DM-Toys blog by Jürgen Plack there are more interesting photos, information and advice about the use of the Tsugawa pads.
Hans Werner Osburg made a comprehensive test of the various cleaning methods for our blog.
1199.99 EUR
(RRP*)
999.99 EUR*
Art.-no. Fulgurex_1160-1
Fulgurex
SNCF "BUGATTI" Présidentiel, XB 1003, 1938, gray / red, analog
FULGUREX produces these railcars in small series from brass in N gauge. The complete interior design (with lighting) and the drive unit are certainly a challenge.
As always with FULGUREX models, the series is limited to a total of 220 pieces.
FULGUREX produces these railcars in small series from brass in N gauge. The complete interior design (with lighting) and the drive unit are certainly a challenge.
As always with FULGUREX models, the series is limited to a total of 220 pieces.
69.90 EUR
(RRP*)
49.99 EUR*
Art.-no. Hobbytrain_H23483
Hobbytrain
Hobbytrain 2er Set Uacs Silowagen SBB Cargo, blue + gray, Ep.V-VI
Four-axle silo truck with pneumatic unloading. Especially suitable for dusty bulk materials such as cement, gypsum, lime, dolomite, etc. A part of these wagons is used exclusively for the transport of eg flour. Since 1972, 375 of these wagons have been in use at SBB Cargo as well as at the major cement producers Holcim, Jura Cement and Ciments Vigier. The BLS also procured 4 cars of this type. LüP: 85mm per car
Four-axle silo truck with pneumatic unloading. Especially suitable for dusty bulk materials such as cement, gypsum, lime, dolomite, etc. A part of these wagons is used exclusively for the transport of eg flour. Since 1972, 375 of these wagons have been in use at SBB Cargo as well as at the major cement producers Holcim, Jura Cement and Ciments Vigier. The BLS also procured 4 cars of this type. LüP: 85mm per car
528.90 EUR
(RRP*)
299.99 EUR*
Art.-no. Jaegerndorfer_JC74310
Jägerndorfer
Jägerndorfer ÖBB 4010.017 Transalpin, Ep.III
- 6-part ivory / blue train
- NEXT 18 decoder interface in the locomotive
- 6-pin decoder interface in the control car
- light change red / white,
- Dining car of the 7110.3 series
- impeller
- 6-part ivory / blue train
- NEXT 18 decoder interface in the locomotive
- 6-pin decoder interface in the control car
- light change red / white,
- Dining car of the 7110.3 series
- impeller
641.90 EUR
(RRP*)
399.99 EUR*
Art.-no. Jaegerndorfer_JC74312
Jägerndorfer
Jägerndorfer ÖBB 4010.017 Transalpin, Ep.III
- 6-part ivory / blue train
- NEXT 18 decoder interface in the locomotive
- 6-pin decoder interface in the control car
- light change red / white,
- Dining car of the 7110.3 series
- impeller
- Equipped with a sound decoder ex works
- 6-part ivory / blue train
- NEXT 18 decoder interface in the locomotive
- 6-pin decoder interface in the control car
- light change red / white,
- Dining car of the 7110.3 series
- impeller
- Equipped with a sound decoder ex works
47.69 EUR*
Art.-no. Minitrix_15492
Minitrix
Prototype: Swiss Federal Railways Cargo Division (SBB Cargo) type Sgns four-axle container flat car. Loaded with 2 coop® refrigerated containers. Operating condition around 2017.
Model: Die-cast metal chassis, type Y 25 bogies, with close coupling mechanisms, loaded with 2 refrigerated containers. Length over the buffers 123 mm.
Model: Die-cast metal chassis, type Y 25 bogies, with close coupling mechanisms, loaded with 2 refrigerated containers. Length over the buffers 123 mm.
229.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Arnold_HN4310
Arnold
DB AG, 6-unit set, “InterCityNight” Talgo, blue/white livery, period V
74.90 EUR
(RRP*)
39.99 EUR*
Art.-no. Arnold_HN4311
Arnold
DB AG, set of 2 additional sleeping coaches Talgo “InterCityNight”, blue/white livery, period V
59.99 EUR
(RRP*)
44.99 EUR*
Art.-no. REE_NW-204
REE Models
The wagon has short coupling kinematics with a NEM 355 shaft. The containers from MALHERBE are detachable and very finely printed.
59.99 EUR
(RRP*)
44.99 EUR*
Art.-no. REE_NW-205
REE Models
The wagon has short coupling kinematics with a NEM 355 shaft. The containers from TAB - de CO2 are removable and very finely printed.
59.99 EUR
(RRP*)
44.99 EUR*
Art.-no. REE_NW-207
REE Models
The wagon has short coupling kinematics with a NEM 355 shaft. The containers from NORBERT DANTRESSANGLE are detachable and very finely printed.
4.99 EUR*
Art.-no. Diverse_40258
Diverse
Cutting and working mat for everyone who needs to cut precisely. Due to its 3mm thick sandwich construction made of 3 layers, this underlay guarantees a functional surface even after frequent use.
12.99 EUR*
Art.-no. Fichtelbahn_100120
Fichtelbahn
In the event of contact problems, for example on a switch, a digital locomotive will quickly stop if there is no safe power consumption. This can be remedied with the help of an energy storage device.
This buffer supplies the motor and decoder with the required current for a short time.
Operation with all locomotive/vehicle decoders with capacitor, buffer memory connections or internal decoder voltages.
with soft start protection against booster shutdowns
max. 18V track voltage / track voltage
Decoder remains programmable
Low heat generation through the use of the latest technologies
23mm x 9mm - can be shortened to 9mm x 9mm with 300µF
2.5mm height with 400µF - expandable to 4.5mm height with 900µF
Dimensions [mm] (at 400µF)23 * 9 * 2.5
capacitor voltage max. 20V
Capacitor capacity 0.4mF / 400µF
Max. driving voltagemax. 18V
This buffer supplies the motor and decoder with the required current for a short time.
Operation with all locomotive/vehicle decoders with capacitor, buffer memory connections or internal decoder voltages.
with soft start protection against booster shutdowns
max. 18V track voltage / track voltage
Decoder remains programmable
Low heat generation through the use of the latest technologies
23mm x 9mm - can be shortened to 9mm x 9mm with 300µF
2.5mm height with 400µF - expandable to 4.5mm height with 900µF
Dimensions [mm] (at 400µF)23 * 9 * 2.5
capacitor voltage max. 20V
Capacitor capacity 0.4mF / 400µF
Max. driving voltagemax. 18V
9.99 EUR
(RRP*)
5.99 EUR*
Art.-no. Noch_36100
Noch
Set with 5 figures and accessories Star box Speed traps Laser gun
39.99 EUR
(RRP*)
19.99 EUR*
Art.-no. Tomytec_312604-14
Tomytec
Contents: 1 plastic model from the 2nd Tomytec construction vehicle collection (Attention, the 2nd photo shows the entire program, but only one vehicle with accessories is included!)
Execution:
- Finished model
- fully painted and designed
- rotating wheels
- enclosed construction crane in orange and a figure
Execution:
- Finished model
- fully painted and designed
- rotating wheels
- enclosed construction crane in orange and a figure
29.99 EUR
(RRP*)
19.99 EUR*
Art.-no. Tomytec_312604-15
Tomytec
Contents: 1 plastic model from the 2nd Tomytec construction vehicle collection (Attention, the 2nd photo shows the entire range, but it only contains one vehicle with accessories!)
Execution:
- Finished model
- fully painted and designed
- rotating wheels
- storage goods
- Skid plate
- 3 pylons and a figure included as accessories
Execution:
- Finished model
- fully painted and designed
- rotating wheels
- storage goods
- Skid plate
- 3 pylons and a figure included as accessories
19.99 EUR
(RRP*)
9.99 EUR*
Art.-no. Tomytec_312604-17
Tomytec
Contents: plastic models from the 2nd Tomytec construction vehicle collection (note the 2nd photo shows the entire range, but it only contains one vehicle with accessories!)
Execution:
- Finished model
- fully painted and designed
Execution:
- Finished model
- fully painted and designed
Yours sincerely
Daniel Mrugalski
DM-Toys