Shipping Destination
Largest N gauge range
All products available
Fast shipping
Shipping Destination
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Manufacturer
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 01/2023: Micromotor, Tomix, Microace, Kato, Tomytec
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
29.99 EUR*
Art.-no. MU_N-M00497
Modellbahn Union
The Puma is an infantry fighting vehicle developed and produced by the German defense contractors Krauss-Maffei Wegmann (KMW) and Rheinmetall Landsysteme GmbH (RLS). The Puma is to be procured for the German army in a number of 350 vehicles and to replace the Marder infantry fighting vehicle. The original plan was 405 units for the army plus five pre-series vehicles. The first Pumas were delivered on December 6, 2010. Delivery of the first series models began on April 17, 2015, after the army inspector had formally declared acceptance four days earlier. Q: Wikipedia
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-M00514
Modellbahn Union
The Faun Z 912/21 was a military truck made by the German commercial vehicle manufacturer Faun and was part of the 1st generation of wheeled vehicles used by the Bundeswehr. Between 1961 and 1969 the vehicle was built in the Z 912/21-155 and -203 variants as a tractor for the corresponding artillery pieces, in the L 912/21 MUN-RK and 912/21 MUN variants as an ammunition transporter for the artillery and as a Z -912/21-A1 tractor for the Skysweeper anti-aircraft guns. Q:Wikipedia
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-M00515
Modellbahn Union
The Faun Z 912/21 was a military truck made by the German commercial vehicle manufacturer Faun and was part of the 1st generation of wheeled vehicles used by the Bundeswehr. Between 1961 and 1969 the vehicle was built in the Z 912/21-155 and -203 variants as a tractor for the corresponding artillery pieces, in the L 912/21 MUN-RK and 912/21 MUN variants as an ammunition transporter for the artillery and as a Z -912/21-A1 tractor for the Skysweeper anti-aircraft guns. Q:Wikipedia
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
9.99 EUR*
(28g, base price 35.68 EUR/100g)
Art.-no. Microscale_MI-9
Microscale
Micro Kristal Klear is the insider tip in model making - no other product achieves such a big difference in the appearance of your models.
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
165.00 EUR
(RRP*)
139.99 EUR*
Art.-no. Minitrix_18702
Minitrix
Prototype: A type Sgns 694 container flat car loaded with two 20 ft "MSC" containers, a type Sdkms 707 pocket car loaded with a semi-trailer for the "Hamburger Spedition" and a type Rs 684 flat car loaded with a 40 ft sea container for the combined freight traffic of the Deutsche Bundesbahn (DB). Operating condition around 1988.
Model: All of the cars have a close coupler mechanism. Chassis and body with type-specific details and separately applied details. Total length over the buffers 349 mm.
Model: All of the cars have a close coupler mechanism. Chassis and body with type-specific details and separately applied details. Total length over the buffers 349 mm.
29.99 EUR*
Art.-no. MicromotorEU_NA024G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold E 63.
Replaces engine 2460-030
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S022 Arnold V65 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x snail W0.3-3.5-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 2460, 2461, 5601
Replaces engine 2460-030
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S022 Arnold V65 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x snail W0.3-3.5-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 2460, 2461, 5601
29.99 EUR*
Art.-no. MicromotorEU_NA025G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold E 69, BR 169
Replaces engine 0778
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S053 Arnold 778 Motor MU v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.4-5-6
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0203, 0206, 0240, 0244, 2400, 2402, 2403, 71041
Replaces engine 0778
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S053 Arnold 778 Motor MU v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.4-5-6
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0203, 0206, 0240, 0244, 2400, 2402, 2403, 71041
29.99 EUR*
Art.-no. MicromotorEU_NA026C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold DB, DSB BR 89.7, DR 89.6, DB BR 80, Renfe 030, US Western - Locomotive (UP, W&A, RG, B&O, N&W, WP, SP, SF, Wabash)
Replaces engine 0776
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S053 Arnold 778 Motor MU v1
- 1x shaft adapter A7 10->15 15 mm
- 1x snail W0.4-5-6
- 1x flywheel mass F006
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0222, 0226, 0226U, 0227, 2221-2224, 2250, 2260U, 2261-2262, 5501, 5512
Replaces engine 0776
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 1x motor mount S053 Arnold 778 Motor MU v1
- 1x shaft adapter A7 10->15 15 mm
- 1x snail W0.4-5-6
- 1x flywheel mass F006
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0222, 0226, 0226U, 0227, 2221-2224, 2250, 2260U, 2261-2262, 5501, 5512
29.99 EUR*
Art.-no. MicromotorEU_NA027G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold BR 93 (DB, DRG), series 693 ÖBB
Replaces engine 2290-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 2x motor mounts S043 Arnold Kof 8 mm v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 2290-2292, 2293A, 2295
Replaces engine 2290-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x 0812S
- 2x motor mounts S043 Arnold Kof 8 mm v1
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 2290-2292, 2293A, 2295
29.99 EUR*
Art.-no. MicromotorEU_NA028G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold Arnold VT 98, rail bus (old) VT 98, BR 798, BR 998, BR 701, tower railcar (old)
Replaces engine 0775
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1215D
- 1x shaft adapter A7 10->15 15 mm
- 1x shaft adapter A10 10->15 7 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0207, 0285, 0290, 0291, 0293, 0321, 0344, 0351, 2910*, 2913, 2914*, 2915*, 2916, 2917, 2926, 4645, 4646
Attention: Arnold has used a new motor on various models from 1991! You must ALWAYS open the model to see which motor you need!
Since Arnold has installed at least three different engines, more conversion kits will follow.
Replaces engine 0775
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1215D
- 1x shaft adapter A7 10->15 15 mm
- 1x shaft adapter A10 10->15 7 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0207, 0285, 0290, 0291, 0293, 0321, 0344, 0351, 2910*, 2913, 2914*, 2915*, 2916, 2917, 2926, 4645, 4646
Attention: Arnold has used a new motor on various models from 1991! You must ALWAYS open the model to see which motor you need!
Since Arnold has installed at least three different engines, more conversion kits will follow.
29.99 EUR*
Art.-no. MicromotorEU_NA029G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold ET 4, ET 184
Replaces engine 2960-006
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2960, 2963, 5602
Replaces engine 2960-006
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816S
- 1x motor mount S035 Arnold standard MU v2
- 1x shaft adapter A8 10->15 4.5 mm
- 1x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2960, 2963, 5602
29.99 EUR*
Art.-no. MicromotorEU_NA030G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold VT 89.9, VT 133, pig's snout
Replaces engine 2920-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 2x shaft adapter A8 10->15 4.5 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2920, 2921, 2922, 2928, 2929, 82920, 82921, 82928, 82929
Replaces engine 2920-020
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0716D
- 2x shaft adapter A8 10->15 4.5 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 2920, 2921, 2922, 2928, 2929, 82920, 82921, 82928, 82929
29.99 EUR*
Art.-no. MicromotorEU_NA031
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Arnold BR 143, 243 (DB, DR, SOB)
Replaces Engine 0108-93
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S035 Arnold standard MU v2
- 2x shaft adapter A13 10->12 3 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 0224, 0259 CH, 0382, 2301, 2302, 2304, 2305, 2306, 2307, 2308 CH, 2309, 2347, 2348, 2359, 70225, 82301, 82306, 82307, 82347, 82307
Replaces Engine 0108-93
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S035 Arnold standard MU v2
- 2x shaft adapter A13 10->12 3 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Arnold No. 0224, 0259 CH, 0382, 2301, 2302, 2304, 2305, 2306, 2307, 2308 CH, 2309, 2347, 2348, 2359, 70225, 82301, 82306, 82307, 82347, 82307
29.99 EUR*
Art.-no. MicromotorEU_NM039C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix DB BR 101
Replaces Engine 0108-93
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002
- 2x flywheel mass F019
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11435, 11446, 12657
Replaces Engine 0108-93
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002
- 2x flywheel mass F019
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11435, 11446, 12657
29.99 EUR*
Art.-no. MicromotorEU_NM040C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix MaK G 1000 BB, BE MAK DE 1002, MaK G 1205, MaK G 1206, DB NS Br 6400, SBB AM 842, ÖBB series 2070, SNCF/FRET BB 461000 / BB 61000
Replaces engines E190 964, E232 208, E321 171, E321 176
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S038 Mabuchi 010 Motor MU v1
- 2x snail W0.3-4-5
- 1x F016 flywheel
- 2x shaft adapter A4 10->15 12.5 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
-Minitrix No. 11135-11136, 11200 81, 11200 83, 11204-11205, 11476-11477, 11479, 12183, 12217-12218, 12352, 12517, 12531, 12547, 12572, 12736, 12741, 12747, 12795-12796, 16061-16062
Replaces engines E190 964, E232 208, E321 171, E321 176
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S038 Mabuchi 010 Motor MU v1
- 2x snail W0.3-4-5
- 1x F016 flywheel
- 2x shaft adapter A4 10->15 12.5 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
-Minitrix No. 11135-11136, 11200 81, 11200 83, 11204-11205, 11476-11477, 11479, 12183, 12217-12218, 12352, 12517, 12531, 12547, 12572, 12736, 12741, 12747, 12795-12796, 16061-16062
29.99 EUR*
Art.-no. MicromotorEU_NM041C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix ICE 3, BR 406
Replaces engine E329 927
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816DH
- 1x motor mount S026 Startrain MU v1
- 2x cardan coupling SP009
- 1x flywheel mass F012
- 1x shaft adapter A4 10->15 12.5 mm
- 1x shaft adapter A7 10->15 15 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11202, 11203, 11206, 12197, 12744, 12793
Replaces engine E329 927
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816DH
- 1x motor mount S026 Startrain MU v1
- 2x cardan coupling SP009
- 1x flywheel mass F012
- 1x shaft adapter A4 10->15 12.5 mm
- 1x shaft adapter A7 10->15 15 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Minitrix No. 11202, 11203, 11206, 12197, 12744, 12793
92.99 EUR*
Art.-no. Tomix_2229
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N couplings
- optionally retrofittable claw couplings
- Train route signs
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N couplings
- optionally retrofittable claw couplings
- Train route signs
92.99 EUR*
Art.-no. Tomix_2230
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N couplings
- optionally retrofittable claw couplings
- Train route signs
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N couplings
- optionally retrofittable claw couplings
- Train route signs
102.99 EUR*
Art.-no. Tomix_7166
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
89.99 EUR*
Art.-no. Tomix_9166
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
89.99 EUR*
Art.-no. Tomix_9167
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
86.99 EUR*
Art.-no. Tomix_9168
Tomix
equipped with:
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
- Engine
- Flywheel
- traction tyres
- changing front lighting
- Standard N-couplings and optionally retrofittable claw couplings
38.99 EUR*
Art.-no. Tomix_9538
Tomix
JNR passenger car Kani 24-100 (silver belt) (T)
131.99 EUR*
Art.-no. Tomix_98388
Tomix
Three-part train set consisting of a type EF66-0 locomotive and type Ohanefu 25 and type Ohane 25 cars
229.99 EUR*
Art.-no. Tomix_98802
Tomix
JNR 24 Series 25-100 Type Express Sleeper (Hayabusa) Set 7 pieces
104.99 EUR*
Art.-no. Tomix_98803
Tomix
JNR Series 24 Type 25-100 Limited Express Sleeper Car Supplement Set 4 pieces
45.99 EUR*
Art.-no. Tomytec_317791
Tomytec
2 tankers from the truck collection. 16KL Hino Super Dolphin Profia Telavi tank truck, 2010 model and 26KL Hino Profia tank truck, 2017 model. Ready-made models, including a road arch.
45.99 EUR*
Art.-no. Tomytec_317807
Tomytec
2 tankers from the truck collection. 16KL tank truck UD Trucks Quon model 2010 and 26KL tank truck UD Trucks Quon model 2017. Ready-made models, including a road arch.
65.99 EUR*
Art.-no. Tomytec_322252
Tomytec
Furnishing:
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
The model can be upgraded with TM-05R motorized chassis, TT-04R metal axles, PT4811N pantograph and standard N couplers.
65.99 EUR*
Art.-no. Tomytec_323259
Tomytec
Furnishing:
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
The model can be upgraded with TM-05R motorized chassis, TT-04R metal axles, PS101CN pantograph and standard N couplers.
53.99 EUR*
Art.-no. Tomytec_324676
Tomytec
Furnishing:
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
- Plastic floor model
- fully assembled and designed
- with plastic wheels
- Standard N couplings between vehicles and dog clutch imitations
The model can be upgraded with TM-14 motorized chassis, TT-04R metal axles, PS101CN pantograph and standard N couplers.
129.99 EUR*
Art.-no. Kato_10-1728
Kato
Series 50-700 passenger cars 3 car set DCC compatible
199.99 EUR*
Art.-no. Kato_2028-2
Kato
Equipped with:
- Engine
- Flywheel
- Front lighting
- traction tyres
- Standard N couplings
- Engine
- Flywheel
- Front lighting
- traction tyres
- Standard N couplings
94.99 EUR*
Art.-no. Kato_7011-4
Kato
Equipped with:
- Engine
- Flywheel
- Light change
- traction tyres
- Standard N couplings
- optional mountable claw couplings
- Engine
- Flywheel
- Light change
- traction tyres
- Standard N couplings
- optional mountable claw couplings
200.99 EUR*
Art.-no. Microace_A2077
Microace
Set of ten cars fitted with standard N couplers
112.99 EUR*
Art.-no. Microace_A2082
Microace
- Motorized vehicle
- Working headlight
- Working headlight
112.99 EUR*
Art.-no. Microace_A2083
Microace
- Motorized vehicle
- Working headlight
- Working headlight
50.99 EUR*
Art.-no. Microace_A3158
Microace
Set of two carriages fitted with standard N couplers
86.99 EUR*
Art.-no. Microace_A3159
Microace
Set of two carriages fitted with standard N couplers
219.99 EUR*
Art.-no. Microace_A9932
Microace
Contents: 4-piece train set
equipped with:
- Engine
- traction tyres
- Light change white-red
- movable pantograph
- Standard N couplings
equipped with:
- Engine
- traction tyres
- Light change white-red
- movable pantograph
- Standard N couplings
219.99 EUR*
Art.-no. Microace_A9935
Microace
Contents: 4-piece train set
equipped with:
- Engine
- traction tyres
- Light change white-red
- movable pantograph
- Standard N couplings
equipped with:
- Engine
- traction tyres
- Light change white-red
- movable pantograph
- Standard N couplings
Yours sincerely
Daniel Mrugalski
DM-Toys