Our product palette at 1 view
N-Scale 11/2022: Modellbahn Union, Kestrel, Mafen, Minitrix
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
19.99 EUR*
Art.-no. MU_N-A50253
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
8.99 EUR*
Art.-no. MU_N-A50149
Modellbahn Union
The well-known, unpainted kit, now for you as a finished product.
Set 3 includes a climbing frame and a standing carousel.
Set 3 includes a climbing frame and a standing carousel.
14.99 EUR*
Art.-no. MU_N-A50170
Modellbahn Union
The well-known, unpainted kit, now for you as a finished product.
8.99 EUR*
Art.-no. MU_N-A50180
Modellbahn Union
The well-known, unpainted kit, now for you as a finished product.
3x2 trestles in different designs
3x2 trestles in different designs
9.99 EUR*
Art.-no. MU_N-A50198
Modellbahn Union
The well-known, unpainted kit, now for you as a finished product.
10.49 EUR*
Art.-no. MU_N-A50200
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
9.99 EUR*
Art.-no. MU_N-A50204
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
7.49 EUR*
Art.-no. MU_N-A50207
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
7.49 EUR*
Art.-no. MU_N-A50214
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
The Iron Policeman is a 2.20 meter high emergency telephone. The top of the column was a yellow rotating beacon. It was activated when a citizen contacted the police using a toggle switch using a hands-free device. For its part, the control center was able to call each individual call post, whereupon the rotating beacon signaled the call to police officers on site. The "Iron Policeman" is still occasionally on duty today.
The Iron Policeman is a 2.20 meter high emergency telephone. The top of the column was a yellow rotating beacon. It was activated when a citizen contacted the police using a toggle switch using a hands-free device. For its part, the control center was able to call each individual call post, whereupon the rotating beacon signaled the call to police officers on site. The "Iron Policeman" is still occasionally on duty today.
14.99 EUR*
Art.-no. MU_N-A50226
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
Set of five detailed chimneys that can be used on our townhouses, for example. Dimensions 15.5 x 12 x 5 mm / 15 x 10.5 x 6 mm / 2 x 8.5 x 5 mm / 11 x 5.7 x 4 mm and 10 x 4.5 x 4.5 mm.
Set of five detailed chimneys that can be used on our townhouses, for example. Dimensions 15.5 x 12 x 5 mm / 15 x 10.5 x 6 mm / 2 x 8.5 x 5 mm / 11 x 5.7 x 4 mm and 10 x 4.5 x 4.5 mm.
7.49 EUR*
Art.-no. MU_N-A50239
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
7.49 EUR*
Art.-no. MU_N-A50240
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
7.49 EUR*
Art.-no. MU_N-A50241
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
7.49 EUR*
Art.-no. MU_N-A50244
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
We originally designed bollards as a decoration for the port of our ferry boat loading bridge.
We originally designed bollards as a decoration for the port of our ferry boat loading bridge.
7.99 EUR*
Art.-no. MU_N-A50245
Modellbahn Union
The well-known, unpainted kit now for you as a finished product.
We originally designed bollards as a decoration for the port of our ferry boat loading bridge.
We originally designed bollards as a decoration for the port of our ferry boat loading bridge.
225.90 EUR*
Art.-no. Fleischmann_734121
Fleischmann
New production series with correctly printed windows!
Electric locomotive Re 620 060 of the Swiss Federal Railways.
Complete redesign 2022!
- Version in blue/red livery with off-centre “TAVANNES” crest
- Square lamps
- Front-climb right with handle
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
The Re 6/6 are six-axle, electric locomotives of the Swiss Federal Railways, which were purchased as a replacement for the Ae 6/6 for heavy service on the Gotthard. With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. Later designated as Re 620, they were equipped with cab air conditioning from 2005.
Electric locomotive Re 620 060 of the Swiss Federal Railways.
Complete redesign 2022!
- Version in blue/red livery with off-centre “TAVANNES” crest
- Square lamps
- Front-climb right with handle
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
The Re 6/6 are six-axle, electric locomotives of the Swiss Federal Railways, which were purchased as a replacement for the Ae 6/6 for heavy service on the Gotthard. With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. Later designated as Re 620, they were equipped with cab air conditioning from 2005.
335.90 EUR*
Art.-no. Fleischmann_734190
Fleischmann
Electric locomotive Re 6/6 of the Swiss Federal Railways.
Complete redesign 2022!
- Version in green livery with round lamps
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
- In digital operation with individually switchable headlights or taillights
- Digitally switchable sound functions
With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. In order to achieve higher cornering speeds, the wheel arrangement Bo'Bo'Bo' was given preference over the usual Co'Co'. The more complex three bogies - further developed from the 4/4?? - also proved to be very advantageous in relation to wheel flange and track wear. The Re 6/6 can be found everywhere, be it in single traction, in multiple control among themselves and especially in freight traffic mostly as so-called Re 10/10 together with a Re 4/4?? or Re 4/4???.
Complete redesign 2022!
- Version in green livery with round lamps
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
- In digital operation with individually switchable headlights or taillights
- Digitally switchable sound functions
With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. In order to achieve higher cornering speeds, the wheel arrangement Bo'Bo'Bo' was given preference over the usual Co'Co'. The more complex three bogies - further developed from the 4/4?? - also proved to be very advantageous in relation to wheel flange and track wear. The Re 6/6 can be found everywhere, be it in single traction, in multiple control among themselves and especially in freight traffic mostly as so-called Re 10/10 together with a Re 4/4?? or Re 4/4???.
333.36 EUR*
Art.-no. Fleischmann_734191
Fleischmann
Electric locomotive Re 620 060 of the Swiss Federal Railways.
Complete redesign 2022!
- Version in blue/red livery with off-centre “TAVANNES” crest
- Square lamps
- Front-climb right with handle
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
- In digital operation with individually switchable headlights or taillights
- Digitally switchable sound functions
The Re 6/6 are six-axle, electric locomotives of the Swiss Federal Railways, which were purchased as a replacement for the Ae 6/6 for heavy service on the Gotthard. With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. Later designated as Re 620, they were equipped with cab air conditioning from 2005.
Complete redesign 2022!
- Version in blue/red livery with off-centre “TAVANNES” crest
- Square lamps
- Front-climb right with handle
- Fine windshield wipers as etched parts
- Filigree pantographs
- Enclosed rail clearers included
- In digital operation with individually switchable headlights or taillights
- Digitally switchable sound functions
The Re 6/6 are six-axle, electric locomotives of the Swiss Federal Railways, which were purchased as a replacement for the Ae 6/6 for heavy service on the Gotthard. With an hourly output of 7,850 kW and a top speed of 140 km/h, the Re 6/6, which went into service for the first time in 1972, is still one of the most powerful locomotives in Switzerland. Later designated as Re 620, they were equipped with cab air conditioning from 2005.
219.99 EUR
(RRP*)
159.99 EUR*
Art.-no. Kato_10-1731
Kato
Rail freight transport on every Rhaetian railway line is an integral part of the lives of the citizens who transport food, drink and mail in the rugged mountain regions of the Swiss Alps. These include the COOP refrigerated container, which is popular for its various design variants, and the container of the Swiss Post, a state-owned Swiss Post company, symbolic Swiss figures for the lives of the citizens. You can see how it is transported daily.
In the summer of 2022, KATO will be launching numerous RhB freight and refrigerated wagons from the companies Coop and Swiss Post in various versions, thus expanding its large Rhaetian Railway range with additional freight wagons. KATO item no. 10-1731, Still number: 7074102
Contents:
Each container with carrier wagon:
- Coop refrigerator car Lb-v 7860 pineapple WAB28, 2-axle
- Coop refrigerator car Lb-v 7861 Pear WAB31, 2-axle
- Coop refrigerator car Lb-v 7862 Radish WAB24, 2-axle
- Coop refrigerator car Lb-v 7864 Orange WAB23, 2-axle
- Coop refrigerator car Lb-v 7867 potato WAB29, 2-axle
- Freight car Lb-v 7869 Post 400 white line, 2-axle
- Goods wagon Sb-t 65666 Post 816 through town and country, 4-axle
- Freight car Sb-t 65668 Post 507, 4-axle
In-house Scharfenberg coupling, a NEM replacement (Arnold) coupling is included and can simply be plugged in.
Minimum clearance radius: R150
In the summer of 2022, KATO will be launching numerous RhB freight and refrigerated wagons from the companies Coop and Swiss Post in various versions, thus expanding its large Rhaetian Railway range with additional freight wagons. KATO item no. 10-1731, Still number: 7074102
Contents:
Each container with carrier wagon:
- Coop refrigerator car Lb-v 7860 pineapple WAB28, 2-axle
- Coop refrigerator car Lb-v 7861 Pear WAB31, 2-axle
- Coop refrigerator car Lb-v 7862 Radish WAB24, 2-axle
- Coop refrigerator car Lb-v 7864 Orange WAB23, 2-axle
- Coop refrigerator car Lb-v 7867 potato WAB29, 2-axle
- Freight car Lb-v 7869 Post 400 white line, 2-axle
- Goods wagon Sb-t 65666 Post 816 through town and country, 4-axle
- Freight car Sb-t 65668 Post 507, 4-axle
In-house Scharfenberg coupling, a NEM replacement (Arnold) coupling is included and can simply be plugged in.
Minimum clearance radius: R150
332.10 EUR*
Art.-no. Minitrix_16982
Minitrix
Prototype: German Railroad, Inc. (DB AG) internal combustion powered rail car (VT) 796 702-9 with control car (VS) 996 778-7. Two-engine design, built starting in 1955. Used in local transport (secondary lines). Condition around 1996.
Highlights:
- Clear view
- mfx/DCC decoder with analog detection
- Sound generator with extensive sound functions
- Continuous lighting with LED
Model: The chassis is made of die-cast metal. Motor with flywheel in railcar, drive on both axles. Built-in digital decoder and sound generator for operation with mfx and DCC. The headlights, marker lights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. With rear-view mirrors for one-man operation. Separable special coupling between the vehicles. Motor vehicle can also be used alone. Coupling replicas without function at the ends for retrofitting are included. Total length over buffers 175 mm.
Highlights:
- Clear view
- mfx/DCC decoder with analog detection
- Sound generator with extensive sound functions
- Continuous lighting with LED
Model: The chassis is made of die-cast metal. Motor with flywheel in railcar, drive on both axles. Built-in digital decoder and sound generator for operation with mfx and DCC. The headlights, marker lights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. With rear-view mirrors for one-man operation. Separable special coupling between the vehicles. Motor vehicle can also be used alone. Coupling replicas without function at the ends for retrofitting are included. Total length over buffers 175 mm.
269.10 EUR*
Art.-no. Minitrix_16126
Minitrix
Prototype: German Federal Railroad (DB) diesel locomotive, road number 212 372-7. Version in ocean blue/ivory for Era IV around 1987. Use: Passenger and freight trains.
Highlights:
- Structure and chassis made of metal
- Lighting with warm white LEDs
- Cab lighting
- Digital sound with many functions
- One-time series
Model: The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. Triple headlights and 2 red marker lights that change over with the direction of travel, can be switched off. Attached handlebars. Length over buffers 75 mm.
Highlights:
- Structure and chassis made of metal
- Lighting with warm white LEDs
- Cab lighting
- Digital sound with many functions
- One-time series
Model: The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. Triple headlights and 2 red marker lights that change over with the direction of travel, can be switched off. Attached handlebars. Length over buffers 75 mm.
269.10 EUR*
Art.-no. Minitrix_16276
Minitrix
Prototype: German Federal Railroad (DB) road number V 169 001 diesel locomotive with an additional gas turbine. The locomotive looks as it did in spring 1968. Use: Passenger and freight trains between Munich and Lindau.
Highlights:
- New construction
- Handle and handrails attached
- Lighting with warm white LED
- Cab lighting
- Digital sound with many functions
Model: The locomotive has a built-in DCC digital decoder and sound generator. Engine with flywheel, 4 axles powered, traction tires. The headlights and taillights change over with the direction of travel, with warm white LEDs, the cab lighting can be controlled digitally. Kinematics for close coupling. Attached handlebars.
The headlights change over with the direction of travel and will work in analog operation.
Length over buffers 102 mm.
Highlights:
- New construction
- Handle and handrails attached
- Lighting with warm white LED
- Cab lighting
- Digital sound with many functions
Model: The locomotive has a built-in DCC digital decoder and sound generator. Engine with flywheel, 4 axles powered, traction tires. The headlights and taillights change over with the direction of travel, with warm white LEDs, the cab lighting can be controlled digitally. Kinematics for close coupling. Attached handlebars.
The headlights change over with the direction of travel and will work in analog operation.
Length over buffers 102 mm.
54.99 EUR
(RRP*)
44.99 EUR*
Art.-no. Minitrix_18056
Minitrix
Prototype: 2nd class, German Railroad, Inc. DBz. Year of construction starting in 1993. Use: Regional express trains.
Model: The car has a close coupler mechanism. Length over buffers 167 mm. Car from the My Hobby series
Model: The car has a close coupler mechanism. Length over buffers 167 mm. Car from the My Hobby series
169.00 EUR
(RRP*)
129.99 EUR*
Art.-no. Minitrix_18210
Minitrix
Prototype: 2 express train couchette cars (B9c9x) with the higher roof design and 1 club car (Sru) of the French State Railways (Société national des chemins de fer français / SNCF), 2nd class.
Model: All of the cars have a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Total length over the buffers 459 mm.
The matching interior lighting: 66616 LED interior lighting.
Model: All of the cars have a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Total length over the buffers 459 mm.
The matching interior lighting: 66616 LED interior lighting.
109.00 EUR
(RRP*)
89.99 EUR*
Art.-no. Minitrix_18211
Minitrix
Prototype: 2 2nd class express couchette cars (B9c9x) with the taller roof of the French State Railways (Société nationale des chemins de fer français / SNCF).
Model: All of the cars have close coupler kinematics. Prepared for the subsequent installation of interior lighting. Total length over buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
Model: All of the cars have close coupler kinematics. Prepared for the subsequent installation of interior lighting. Total length over buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
109.00 EUR
(RRP*)
79.99 EUR*
Art.-no. Minitrix_18252
Minitrix
Prototype: 2 type WLABm sleeper cars operated by the State Railroad of the Russian Federation (RZD). Use: High-quality long-distance transport, here in the EC Venezia around 2009.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18253, 18254 and 18255.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18253, 18254 and 18255.
109.00 EUR
(RRP*)
89.99 EUR*
Art.-no. Minitrix_18253
Minitrix
Prototype: 1 MÁV-START WLAB express sleeper car and 1 Bc couchette car. Use: High-quality long-distance transport, here in the EC "Venezia" around 2009.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over the buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18254 and 18255.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over the buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18254 and 18255.
119.00 EUR
(RRP*)
99.99 EUR*
Art.-no. Minitrix_18254
Minitrix
Prototype: 1 WLABmee express train sleeping car and 1 Bcm couchette car painted and lettered for the C#ile Ferate Române (CFR). Use: High-quality long-distance service, here in the EC Venezia around 2009.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Total length over the buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18255 in an exemplary manner.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting. Total length over the buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18255 in an exemplary manner.
119.00 EUR
(RRP*)
99.99 EUR*
Art.-no. Minitrix_18255
Minitrix
Prototype: 2 Italian State Railways (FS) type UIC-X (Bm) express train passenger cars. Use: High-quality long-distance traffic, here in the EC "Venezia" around 2009.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting.
Total length over buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18254 in an exemplary manner.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting.
Total length over buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18254 in an exemplary manner.
43.99 EUR
(RRP*)
33.99 EUR*
Art.-no. Minitrix_18430
Minitrix
Formerly a brewery, today an art center: the Wiels in Brussels. It was in 1862 that the Wielemans family founded their brewery on Rue de Terre-Neuve in the center of Brussels, which lasted until 1988. It was a small family brewery, but in 1879 it was time to move to the outskirts of Brussels, because dreams got bigger and the brewery grew. As early as 1885, the brewery began producing its first blond, fermented beers, which had to be constantly cooled. Years pass and in the difficult period of World War II the company creates a temporary beer, Wiel's, a Fluitjesbier (a very low-alcohol beer). Wiel's would become the most famous Wielemans-Ceuppens beer!
Prototype: Three-axle boxcar as a beer refrigerator car with a brakeman's cab. Private car painted and lettered for Wiel's Wielemans, used on the Belgian State Railways (SNCB). The car looks as it did in the mid-1950s.
Model: The car has movable sliding doors, close coupling mechanisms, and spoked wheels. Length over the buffers 72 mm.
Prototype: Three-axle boxcar as a beer refrigerator car with a brakeman's cab. Private car painted and lettered for Wiel's Wielemans, used on the Belgian State Railways (SNCB). The car looks as it did in the mid-1950s.
Model: The car has movable sliding doors, close coupling mechanisms, and spoked wheels. Length over the buffers 72 mm.
53.09 EUR*
Art.-no. Minitrix_18431
Minitrix
Prototype: German State Railroad (DR) type Rgs 3910 flat car. European standard wagon with a length of 19.90 m. Loaded with three 20-foot mail containers.
Model: The car has a close coupler mechanism. With cargo 20-foot postal container.
Length over buffers 124 mm.
Model: The car has a close coupler mechanism. With cargo 20-foot postal container.
Length over buffers 124 mm.
94.99 EUR
(RRP*)
79.99 EUR*
Art.-no. Minitrix_18718
Minitrix
Prototype: Two pocket cars painted and lettered for AAE Cargo AG, leased to DB SR Intermodal. Type Sdgmns 33 loaded with semi-trailers from Carlsberg and Tuborg. State around 2013.
Model: All of the cars are loaded with detachable semi-trailers. Chassis made of die-cast metal, with kinematics for close coupling. All cars with different company numbers. Total length over the buffers 204 mm.
Model: All of the cars are loaded with detachable semi-trailers. Chassis made of die-cast metal, with kinematics for close coupling. All cars with different company numbers. Total length over the buffers 204 mm.
228.00 EUR*
Art.-no. Piko_40374
Piko
New for 2022: The PIKO model of the 1100 series of the Dutch State Railways NS on a scale of 1:160 convinces with a successful mold construction with harmonious roof curves and many attached parts, such as fine insulators and pantographs, free-standing handrails and stairs. The model has the right lamp shape, sharply engraved bogie covers with realistic replicas of the spring assemblies and miniatures of the buffer beams that are true to the original. The front and rear lights, which function depending on the direction of travel, are designed using LED technology. The PIKO motor ensures excellent driving characteristics and high tractive forces. The model has a tidy circuit board with a Next18 interface and is prepared for easy retrofitting of a decoder. The machine stands out from the previous models with a body without decorative moldings and coats of arms. In addition, this locomotive has installed the L light scheme for the first time.
342.00 EUR*
Art.-no. Piko_40375
Piko
New for 2022: The PIKO model of the 1100 series of the Dutch State Railways NS on a scale of 1:160 convinces with a successful mold construction with harmonious roof curves and many attached parts, such as fine insulators and pantographs, free-standing handrails and stairs. The model has the right lamp shape, sharply engraved bogie covers with realistic replicas of the spring assemblies and miniatures of the buffer beams that are true to the original. The front and rear lights, which function depending on the direction of travel, are designed using LED technology. The PIKO motor ensures excellent driving characteristics and high tractive forces. A suitable sound decoder is already integrated in the factory for the sound version. The machine stands out from the previous models with a body without decorative moldings and coats of arms. In addition, this locomotive has installed the L light pattern for the first time.
206.91 EUR*
Art.-no. Arnold_HN4355
Arnold
SNCF/RENFE, 6 pcs. Basic set, Talgo "Francisco de Goya" (Paris - Madrid) in blue/white livery, epoch five
103.41 EUR*
Art.-no. Arnold_HN4356
Arnold
SNCF/RENFE, 3 pcs. Supplementary set, Talgo "Francisco de Goya" (Paris - Madrid) in blue/white, consisting of 1 x dining car, 1 x bar car, 1 x "superreclinable" car, epoch five
67.41 EUR*
Art.-no. Arnold_HN4357
Arnold
SNCF/RENFE, 2 pcs. Supplementary set, Talgo "Francisco de Goya" (Paris – Madrid) in blue/white livery, consisting of 2 x sleeping cars, epoch five
78.21 EUR*
Art.-no. Arnold_HN4362
Arnold
DB, 2 pcs. 1st and 2nd class passenger coach set, in blue/beige livery, consisting of 1 x Am203 and 1 x Bm233, epoch four
42.21 EUR*
Art.-no. Arnold_HN4363
Arnold
DB, Bm234 2nd class passenger coach, MD 36 bogies, in blue/beige livery with black frame, epoch four
133.56 EUR*
Art.-no. Arnold_HN4365
Arnold
DB AG, 3 pcs. "Rollende Raststätte" passenger coach set in oriental red/white livery, consisting of 2 x Avm and 1 x WGm, epoch five
In April 1995, Deutsche Bahn AG set up its "Berlin-Shuttle" between Grunewald and Lehrte near Hanover for the super saver fare of 99 marks - the only condition: the travelers had to take the Germans' dearest child with them on a piggyback. An Intercity with car transport wagons now commuted twice a day between Berlin-Grunewald and Lehrte. The purpose of the 'Rollende Raststätte' was to relieve the constantly overcrowded A2 between Berlin and Hanover. For this purpose, individual cars were labeled accordingly. In addition to conventional dining cars, the DB AG WGmh 804.0 painted in the InterRegio color scheme was also used.
In April 1995, Deutsche Bahn AG set up its "Berlin-Shuttle" between Grunewald and Lehrte near Hanover for the super saver fare of 99 marks - the only condition: the travelers had to take the Germans' dearest child with them on a piggyback. An Intercity with car transport wagons now commuted twice a day between Berlin-Grunewald and Lehrte. The purpose of the 'Rollende Raststätte' was to relieve the constantly overcrowded A2 between Berlin and Hanover. For this purpose, individual cars were labeled accordingly. In addition to conventional dining cars, the DB AG WGmh 804.0 painted in the InterRegio color scheme was also used.
38.60 EUR*
Art.-no. Arnold_HN6593
Arnold
RENFE, 4-axle. Container car MMC, in blue livery, loaded with a 45' container "DHL", Ep. VI
14.99 EUR*
Art.-no. Eurographics_6500-0251
Eurographics
EuroGraphics History of Trains 500-piece puzzle. Package dimensions 35 x 25 x 6 cm. Dimensions of the assembled puzzle 48 x 68 cm. Specially developed cardboard with a resistant linen structure for an even better cohesion of the parts.
15.00 EUR*
Art.-no. FKS_160-210-02
FKS
16 full-scale beer crates as a kit. 3D-printed, 2-part.
5.99 EUR*
Art.-no. Kestrel_GMKD78
Kestrel
PROTOTYPE
Post boxes have graced the streets of the UK since the mid 1800s, but back then they were very different. It was not until the reign of Queen Victoria that a standard design was established. The "Type B" mailbox was derived from the "Anonymous" design and, with only a few modifications, has remained the iconic piece of street furniture we see today.
MODEL
This pack contains three pillar boxes made from photopolymer resin, each bearing the ER marking for the reign of Queen Elizabeth II. They are pre-painted and ready to use on the layout right out of the box.
Post boxes have graced the streets of the UK since the mid 1800s, but back then they were very different. It was not until the reign of Queen Victoria that a standard design was established. The "Type B" mailbox was derived from the "Anonymous" design and, with only a few modifications, has remained the iconic piece of street furniture we see today.
MODEL
This pack contains three pillar boxes made from photopolymer resin, each bearing the ER marking for the reign of Queen Elizabeth II. They are pre-painted and ready to use on the layout right out of the box.
4.99 EUR*
Art.-no. Kestrel_GMKD79
Kestrel
PROTOTYPE
Concrete bollards provide security by preventing vehicles from entering or reaching areas that would endanger pedestrians. Consisting of a metal frame encased in concrete, they can be found in front of buildings, on dirt roads, and anywhere vehicles are denied access.
MODEL
This pack contains ten photopolymer resin bollards. They are already painted and can be used directly from the pack on the layout.
Concrete bollards provide security by preventing vehicles from entering or reaching areas that would endanger pedestrians. Consisting of a metal frame encased in concrete, they can be found in front of buildings, on dirt roads, and anywhere vehicles are denied access.
MODEL
This pack contains ten photopolymer resin bollards. They are already painted and can be used directly from the pack on the layout.
5.99 EUR*
Art.-no. Kestrel_GMKD80
Kestrel
PROTOTYPE
These trash cans have been a common sight for many years. You can find them all over the country, in public parks and on city streets. Their design has changed in recent years to include ashtrays and recycling stations, but the basic design presented here is still widely used.
MODEL
This pack contains three black photopolymer resin bins. They are already painted and can be used directly from the pack on the layout.
These trash cans have been a common sight for many years. You can find them all over the country, in public parks and on city streets. Their design has changed in recent years to include ashtrays and recycling stations, but the basic design presented here is still widely used.
MODEL
This pack contains three black photopolymer resin bins. They are already painted and can be used directly from the pack on the layout.
6.99 EUR*
Art.-no. Kestrel_GMKD81
Kestrel
PROTOTYPE
Relay boxes, also called relay cabinets, were located next to the tracks. They were used as part of the interlockings between tracks, points and signals, and were generally located near railroad stations and marshalling yards.
MODEL
This pack contains 2 large and 2 small relay boxes. These are 3D printed models made from photopolymer resin. These models are pre-painted and ready to use on the layout right out of the box.
Relay boxes, also called relay cabinets, were located next to the tracks. They were used as part of the interlockings between tracks, points and signals, and were generally located near railroad stations and marshalling yards.
MODEL
This pack contains 2 large and 2 small relay boxes. These are 3D printed models made from photopolymer resin. These models are pre-painted and ready to use on the layout right out of the box.
6.99 EUR*
Art.-no. Kestrel_GMKD82
Kestrel
PROTOTYPE
Skips have been an easy way to dump large amounts of trash for years. This type of trough can be traced back to the early 1930s, with this type of construction becoming most common in the home from the 1960s onwards. This era required quick and easy disposal of waste during the construction boom, which generated a lot of construction and renovation waste. This type of skip is commonplace in our society today and the opportunity to rent one is just a phone call away.
MODEL
This bundle contains three orange 3D printed photopolymer resin trash cans. They are pre-painted and ready to use on the layout right out of the box.
Skips have been an easy way to dump large amounts of trash for years. This type of trough can be traced back to the early 1930s, with this type of construction becoming most common in the home from the 1960s onwards. This era required quick and easy disposal of waste during the construction boom, which generated a lot of construction and renovation waste. This type of skip is commonplace in our society today and the opportunity to rent one is just a phone call away.
MODEL
This bundle contains three orange 3D printed photopolymer resin trash cans. They are pre-painted and ready to use on the layout right out of the box.
4.99 EUR*
Art.-no. Kestrel_GMKD83
Kestrel
PROTOTYPE
Also known as drums, these barrels were used to transport oil and bulk liquid goods. The shape of these casks allowed them to be stacked for ease of transport, taking up less floor space at the time. The terms "keg" and "drum" are used almost interchangeably, with the terms usually referring to the size and capacity of the containers.
MODEL
This pack contains ten 3D printed barrels divided into six black, two red and two green, all made from photopolymer resin. They are pre-painted and ready to use on the layout right out of the box.
Also known as drums, these barrels were used to transport oil and bulk liquid goods. The shape of these casks allowed them to be stacked for ease of transport, taking up less floor space at the time. The terms "keg" and "drum" are used almost interchangeably, with the terms usually referring to the size and capacity of the containers.
MODEL
This pack contains ten 3D printed barrels divided into six black, two red and two green, all made from photopolymer resin. They are pre-painted and ready to use on the layout right out of the box.
4.99 EUR*
Art.-no. Kestrel_GMKD84
Kestrel
PROTOTYPE
This type of garbage cans is widely used in the world today. Although these bins have largely been replaced by plastic versions in recent years, there are still plenty of metal bins around, albeit mostly in a slightly more dilapidated condition.
This type of garbage can was in use for many years and it was common to see them lined up and down the front yards of townhouses, as well as hidden in porches, sheds and in various locations around residential and commercial buildings.
MODEL
This pack contains ten 3D printed traditional photopolymer resin trash cans. They are already painted and can be used directly from the pack on the layout.
This type of garbage cans is widely used in the world today. Although these bins have largely been replaced by plastic versions in recent years, there are still plenty of metal bins around, albeit mostly in a slightly more dilapidated condition.
This type of garbage can was in use for many years and it was common to see them lined up and down the front yards of townhouses, as well as hidden in porches, sheds and in various locations around residential and commercial buildings.
MODEL
This pack contains ten 3D printed traditional photopolymer resin trash cans. They are already painted and can be used directly from the pack on the layout.
5.99 EUR*
Art.-no. Kestrel_GMKD85
Kestrel
PROTOTYPE
Bins of this form were first seen in the UK in 1968 when they were invented as a means of moving waste between areas of a molding company that developed them. It is believed that a health and safety inspector saw them in use on a routine visit and saw their full potential.
Since then, more and more of these bins have come into use, and communities have adopted them as a standard garbage collection method, even adapting their vehicles to work directly with these types of bins.
MODEL
This pack contains two green and two gray 3D printed photopolymer resin trash cans. They are already painted and can be used directly from the pack on the layout.
Just make sure you put them up on the right day!
Bins of this form were first seen in the UK in 1968 when they were invented as a means of moving waste between areas of a molding company that developed them. It is believed that a health and safety inspector saw them in use on a routine visit and saw their full potential.
Since then, more and more of these bins have come into use, and communities have adopted them as a standard garbage collection method, even adapting their vehicles to work directly with these types of bins.
MODEL
This pack contains two green and two gray 3D printed photopolymer resin trash cans. They are already painted and can be used directly from the pack on the layout.
Just make sure you put them up on the right day!
4.99 EUR*
Art.-no. Kestrel_GMKD86
Kestrel
PROTOTYPE
Telecoms closets can be seen all over Britain. Its purpose is to connect all incoming lines from underground and above to the telephone in the area. Imagine a huge junction box with more wires running through it than in a normal facility. They can be placed anywhere in your streets and neighborhoods, keeping all of your housemates connected.
MODEL
This pack contains two standard and one large photopolymer resin telecom cabinet. They are already painted and can be used directly from the pack on the layout.
Telecoms closets can be seen all over Britain. Its purpose is to connect all incoming lines from underground and above to the telephone in the area. Imagine a huge junction box with more wires running through it than in a normal facility. They can be placed anywhere in your streets and neighborhoods, keeping all of your housemates connected.
MODEL
This pack contains two standard and one large photopolymer resin telecom cabinet. They are already painted and can be used directly from the pack on the layout.
3.99 EUR*
Art.-no. Kestrel_GMKD87
Kestrel
PROTOTYPE
Grit containers, also called salt containers, are used to hold large quantities of a grit and salt mixture. This mixture is used to prevent the formation of snow and ice in colder weather. The bins can be found everywhere as they are used by both railway authorities and city governments on busy roads. The mix is usually hand spread to ensure all pedestrians and vehicles have a slip free day.
MODEL
This pack contains three modern yellow photopolymer resin grit boxes. They are pre-painted and ready to use on the layout right out of the box.
Grit containers, also called salt containers, are used to hold large quantities of a grit and salt mixture. This mixture is used to prevent the formation of snow and ice in colder weather. The bins can be found everywhere as they are used by both railway authorities and city governments on busy roads. The mix is usually hand spread to ensure all pedestrians and vehicles have a slip free day.
MODEL
This pack contains three modern yellow photopolymer resin grit boxes. They are pre-painted and ready to use on the layout right out of the box.
4.99 EUR*
Art.-no. Kestrel_GMKD88
Kestrel
PROTOTYPE
In 1958 the first parking meter was installed in London on July 10 with a charge of 6d. From then on they were put up all over the UK to charge for parking. Over 750,000 parking meters have been installed across the UK and the design has been copied around the world. They were placed near a parking lot and allowed the vehicle parked in the corresponding space to remain there for the desired period of time. They were later replaced by the parking ticket machine.
MODEL
This pack contains six photopolymer resin parking meters. They are pre-painted and ready to use on the layout right out of the box.
In 1958 the first parking meter was installed in London on July 10 with a charge of 6d. From then on they were put up all over the UK to charge for parking. Over 750,000 parking meters have been installed across the UK and the design has been copied around the world. They were placed near a parking lot and allowed the vehicle parked in the corresponding space to remain there for the desired period of time. They were later replaced by the parking ticket machine.
MODEL
This pack contains six photopolymer resin parking meters. They are pre-painted and ready to use on the layout right out of the box.
3.99 EUR*
Art.-no. Kestrel_GMKD89
Kestrel
PROTOTYPE
Pay and display machines have replaced the original parking machines and can now be found in all paid parking areas across the country. Their use has increased as they serve a larger area and multiple plazas, making installation, maintenance and replacement faster and easier than their predecessors. They can be found in street parking lots and parking garages, but also in older parking garages and shopping malls.
MODEL
This pack contains two photopolymer resin pay stations. They are already painted and can be used directly from the pack on the layout.
Pay and display machines have replaced the original parking machines and can now be found in all paid parking areas across the country. Their use has increased as they serve a larger area and multiple plazas, making installation, maintenance and replacement faster and easier than their predecessors. They can be found in street parking lots and parking garages, but also in older parking garages and shopping malls.
MODEL
This pack contains two photopolymer resin pay stations. They are already painted and can be used directly from the pack on the layout.
3.99 EUR*
Art.-no. Kestrel_GMKD90
Kestrel
PROTOTYPE
The first vending machine dates back to ancient Rome and dispensed holy water. Many years later, the sight of a vending machine can be a welcome relief to a weary traveler.
These machines can be found all over the world, from train stations in the UK to promenades in Hong Kong and even in hospitals.
MODEL
This pack contains two photopolymer resin vending machines. They are pre-painted and ready to use on the layout right out of the box.
The first vending machine dates back to ancient Rome and dispensed holy water. Many years later, the sight of a vending machine can be a welcome relief to a weary traveler.
These machines can be found all over the world, from train stations in the UK to promenades in Hong Kong and even in hospitals.
MODEL
This pack contains two photopolymer resin vending machines. They are pre-painted and ready to use on the layout right out of the box.
29.50 EUR*
Art.-no. Mafen_413501
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
31.90 EUR*
Art.-no. Mafen_413502
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
32.50 EUR*
Art.-no. Mafen_413503
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.50 EUR*
Art.-no. Mafen_413504
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.50 EUR*
Art.-no. Mafen_413505
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.50 EUR*
Art.-no. Mafen_413506
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.50 EUR*
Art.-no. Mafen_413507
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
34.90 EUR*
Art.-no. Mafen_413508
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
38.50 EUR*
Art.-no. Mafen_413509
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
38.50 EUR*
Art.-no. Mafen_413510
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
38.50 EUR*
Art.-no. Mafen_413511
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
38.50 EUR*
Art.-no. Mafen_413512
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
41.50 EUR*
Art.-no. Mafen_413513
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
41.50 EUR*
Art.-no. Mafen_413514
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
29.50 EUR*
Art.-no. Mafen_413515
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
32.50 EUR*
Art.-no. Mafen_413516
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.90 EUR*
Art.-no. Mafen_413517
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.90 EUR*
Art.-no. Mafen_413518
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
24.90 EUR*
Art.-no. Mafen_413519
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
28.50 EUR*
Art.-no. Mafen_413520
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
32.50 EUR*
Art.-no. Mafen_413521
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.90 EUR*
Art.-no. Mafen_413522
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
35.90 EUR*
Art.-no. Mafen_413523
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
39.50 EUR*
Art.-no. Mafen_413524
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
25.50 EUR*
Art.-no. Mafen_413525
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
27.90 EUR*
Art.-no. Mafen_413526
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
24.90 EUR*
Art.-no. Mafen_413527
Mafen
DSB signal
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
- true to scale (1:160)
- "Fine Scale" product
- LED SMD included
- Structure and railings in photo-etched brass
- Fine details made of high quality 3D printed material
- Resistors up to 16 V (direct current) included
29.99 EUR*
Art.-no. MicromotorEU_NF046G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann DB BR 43, BR 44, SNCF 150 X.
Replaces Fleischmann engines 50714401 and 132718. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S049 N030 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7144xx
Replaces Fleischmann engines 50714401 and 132718. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S049 N030 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.3-4-5
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7144xx
29.99 EUR*
Art.-no. MicromotorEU_NF047
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann Vectron, BR 193, BLS Re 475, OBB Rh 1293, BR 118, V 180 model from 2020.
Replaces Fleischmann engine no. 144448. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S049 N030 MU v1
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7214 01, 7214 03-7214 04, 7214 71, 7214 73-7214 74, 7392 77-7392 79, 7392 81-7392 85, 7392 90, 7393 09, 7393 12, 7393 15, 897,393 1 9393 47-7393 49, 7393 51-7393 55, 7393 60, 7393 89, 7393 92, 7393 95, 7393 98- 7393 99, 9318 91
Replaces Fleischmann engine no. 144448. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1x motor 0816D*
- 1x motor mount S049 N030 MU v1
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7214 01, 7214 03-7214 04, 7214 71, 7214 73-7214 74, 7392 77-7392 79, 7392 81-7392 85, 7392 90, 7393 09, 7393 12, 7393 15, 897,393 1 9393 47-7393 49, 7393 51-7393 55, 7393 60, 7393 89, 7393 92, 7393 95, 7393 98- 7393 99, 9318 91
29.99 EUR*
Art.-no. MicromotorEU_NF048C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann BR 515, BR 150 ETA.
Replaces Fleischmann engine no. 145520. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S049 N030 MU v1
- 1x cardan coupling SP009
- 1x shaft adapter A7 10->15 15 mm
- 1x flywheel mass F005
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7401 00, 7401 03, 7401 70, 7401 73
Replaces Fleischmann engine no. 145520. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S049 N030 MU v1
- 1x cardan coupling SP009
- 1x shaft adapter A7 10->15 15 mm
- 1x flywheel mass F005
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7401 00, 7401 03, 7401 70, 7401 73
29.99 EUR*
Art.-no. MicromotorEU_NF049C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann E 10.12, E 10.2, E 10.3, BR 110, BR 110.1, BR 110.3, BR 111, BR 112, BR 115, BR 139, BR 140.
Replaces Fleischmann engines no. 50733002 and 507346. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x snail W0.4-4-7
- 2x shaft adapter A2 10->15 20 mm
- 1x F016 flywheel
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7325 01, 7330 XX, 7331, 7331 XX, 7335 01, 7335 02, 7336 XX, 6 7336, 7337, 7337 XX, 7338 XX, 7346, 7346 XX, 6 7346, 7811 05, 7811 05, 7811 183 5 01, 7813 02, 7813 81, 7813 82, 7816 04, 2009 04, 9318 95
Replaces Fleischmann engines no. 50733002 and 507346. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x snail W0.4-4-7
- 2x shaft adapter A2 10->15 20 mm
- 1x F016 flywheel
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7325 01, 7330 XX, 7331, 7331 XX, 7335 01, 7335 02, 7336 XX, 6 7336, 7337, 7337 XX, 7338 XX, 7346, 7346 XX, 6 7346, 7811 05, 7811 05, 7811 183 5 01, 7813 02, 7813 81, 7813 82, 7816 04, 2009 04, 9318 95
29.99 EUR*
Art.-no. MicromotorEU_NF050C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann Fleischmann DB BR 147, DB BR 147.5, DB LTE Railpool BR 187, Swiss Rail Traffic Re 487.
Replaces Fleischmann engine no. 50738901. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S033 Fleischmann 507393 MU v1
- 1x shaft adapter A6 10->15 22 mm
- 1x shaft adapter A27 10->15 29 mm
- 2x snail W0.3-3.5-5
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7389 XX, 9318 88
Replaces Fleischmann engine no. 50738901. The locomotive is not included.
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S033 Fleischmann 507393 MU v1
- 1x shaft adapter A6 10->15 22 mm
- 1x shaft adapter A27 10->15 29 mm
- 2x snail W0.3-3.5-5
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7389 XX, 9318 88
59.99 EUR*
Art.-no. MicromotorEU_NM036G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix SBB Ae 8/14.
Replaces engines E326 165 and E326 754. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 2x engine 0816D
- 2x motor mount S031 China Motor MU v1
- 2x shaft adapter A9 10->15 8 mm
- 2x shaft adapter A22 10->12 10 mm
- 4x snail W0.3-4-5
- 4x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 12426, 12713
Replaces engines E326 165 and E326 754. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 2x engine 0816D
- 2x motor mount S031 China Motor MU v1
- 2x shaft adapter A9 10->15 8 mm
- 2x shaft adapter A22 10->12 10 mm
- 4x snail W0.3-4-5
- 4x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 12426, 12713
29.99 EUR*
Art.-no. MicromotorEU_NM037
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix E 36, EP 3/6.
Replaces engines 31 2910 04 and 41 2910 04. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A23 10->12 9 mm
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1018 00, 51 1077 00, 51 2910 00, 51 2912 00, 11077, 12462, 12522, 12910-12912
Replaces engines 31 2910 04 and 41 2910 04. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A23 10->12 9 mm
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1018 00, 51 1077 00, 51 2910 00, 51 2912 00, 11077, 12462, 12522, 12910-12912
29.99 EUR*
Art.-no. MicromotorEU_NM038G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix SBB Ae 6/6.
Replaces motor 41 0119 00. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S005 Minitrix E10 1309 engine MU v1
- 1x shaft adapter A13 10->12 3 mm
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1004 00 (2 motors)*, 51 2936 00 (motor with bearing block), 51 2939 00 (motor with bearing block), 12936 (motor with bearing block), 12939 (motor with bearing block)
*For the conversion of the model 51 1004 00 (2-motor) this set is required twice!
Replaces motor 41 0119 00. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S005 Minitrix E10 1309 engine MU v1
- 1x shaft adapter A13 10->12 3 mm
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-5-6
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 51 1004 00 (2 motors)*, 51 2936 00 (motor with bearing block), 51 2939 00 (motor with bearing block), 12936 (motor with bearing block), 12939 (motor with bearing block)
*For the conversion of the model 51 1004 00 (2-motor) this set is required twice!
29.99 EUR*
Art.-no. MicromotorEU_NR010C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Roco BR 101, BR 150, BR 181, Traxx, ET 85, ET 90, C4ieT.
Replaces motor 85092. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002
- 2x flywheel mass F019
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 2161A, 23001, 23244-23245, 23291-23292, 23308-23317, 23320-23322, 23324, 23330-23332, 23385-23387, 23400-23403, 23416,-234506,-234506
Roco No. 23245 was delivered with engine 85020 (conversion kit NR001) and engine 85092 (conversion kit NR010C)!!
Replaces motor 85092. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002
- 2x flywheel mass F019
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 2161A, 23001, 23244-23245, 23291-23292, 23308-23317, 23320-23322, 23324, 23330-23332, 23385-23387, 23400-23403, 23416,-234506,-234506
Roco No. 23245 was delivered with engine 85020 (conversion kit NR001) and engine 85092 (conversion kit NR010C)!!
59.99 EUR*
Art.-no. MicromotorEU_NR011F
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Roco V188, BR 288.
Replaces motor 85088. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 2x engine 0816D
- 2x motor mount S021 Roco 85020 MU v1
- 2x shaft adapter A10 10->15 7 mm
- 2x flywheel mass F013
- 4x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23265-23267, 23435-23436
Replaces motor 85088. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 2x engine 0816D
- 2x motor mount S021 Roco 85020 MU v1
- 2x shaft adapter A10 10->15 7 mm
- 2x flywheel mass F013
- 4x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23265-23267, 23435-23436
13.90 EUR*
Art.-no. N-Train_211051
N-Train
Cemetery with Christian graves 9 parts
13.90 EUR*
Art.-no. N-Train_211052
N-Train
Cemetery with Jewish graves 8 parts
13.90 EUR*
Art.-no. N-Train_211053
N-Train
Cemetery with Muslim graves 9 parts
13.90 EUR*
Art.-no. N-Train_211054
N-Train
Cemetery with old Christian graves 11 pieces
Yours sincerely
Daniel Mrugalski
DM-Toys