Shipping Destination
Largest N gauge range
All products available
Fast shipping
Shipping Destination
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 09/2022: Minitrix, Fleischmann, Micromotor, N-Train
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
14.99 EUR*
Art.-no. MU_N-i00069
Modellbahn Union
The machine house for tunnel ventilation is based on a building as published in the magazine "Die Bautechnik" - Issue 12, March 1925. Tunnel ventilation was necessary when steam locomotives traveled through longer tunnels and the steam could not be evacuated by the natural flow of air. Our model is a scaled down version, making it suitable for any layout that uses tunnels.
15.99 EUR*
Art.-no. MU_N-A00257
Modellbahn Union
Very filigree Finescale lamp with realistic warm white LED.
The power supply is via 2 copper wires. With the enclosed diode and the resistor the lamp can be connected to a normal railway transformer (3-16 Volt). The lamp has a foot with a diameter of 3mm. This allows the resistor and the diode to be soldered before. To attach the lamp, simply drill a 3mm hole in the bottom plate, pass the wires through the hole and then insert the lamp into the hole.
The power supply is via 2 copper wires. With the enclosed diode and the resistor the lamp can be connected to a normal railway transformer (3-16 Volt). The lamp has a foot with a diameter of 3mm. This allows the resistor and the diode to be soldered before. To attach the lamp, simply drill a 3mm hole in the bottom plate, pass the wires through the hole and then insert the lamp into the hole.
24.99 EUR*
Art.-no. MU_N-M00488
Modellbahn Union
The Fuchs transport tank (TPz Fuchs) is an amphibious wheeled armor made in Germany. In addition to its main area of activity as a transport tank and kit carrier, the six-wheel, four-wheel drive vehicle served as the basis for the Wildcat anti-aircraft tank and as a weapon carrier for various weapon systems in the test phase. In addition to the different vehicle variants, a distinction is made between the Fuchs 1 and the further development Fuchs 2. It was manufactured by the former arms company Thyssen-Henschel, which has belonged to Rheinmetall Landsysteme since 1999 and is a subsidiary of Rheinmetall AG. (Source: Wikipedia)
The highly detailed, unpainted model was produced in 3D printing and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced in 3D printing and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-M00506
Modellbahn Union
From 1960, the type Jupiter derived from the Uranus series was supplied by Magirus to the Bundeswehr. Originally with the engine of the A6500 type with 170 hp, from 1961 the newly designed multi-fuel engine F8L714A with 12.6 liters and 178 hp was installed. From 1960-1967 about 7800 vehicles of the Jupiter series were delivered in various versions. (From https://www.panzer-modell.de/referenz/in_detail/magirus_jupiter_kranwagen/mjk.htm )
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
39.99 EUR*
Art.-no. MU_N-S00094
Modellbahn Union
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
39.99 EUR*
Art.-no. MU_N-S00093
Modellbahn Union
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and paints (e.g. with Revell Email or Revell Aqua Color).
11.99 EUR*
Art.-no. RAILNSCALE_N3962
RAILNSCALE
This kit comprises Figurine with hand truck and crates of drinks.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
469.00 EUR
(RRP*)
399.99 EUR*
Art.-no. Minitrix_16184
Minitrix
Prototype: German Federal Railroad (BD Stuttgart / Bw Ulm) steam locomotive 18 495 (type S 3/6 of the k series, Maffei 1924) with a type 2´2 T 26.4 tender, as it looked in the mid-1950s.
Highlights:
Digital sound with many functions
Model: The locomotive and tender are made of die-cast metal. Bell-shaped armature motor with flywheel in boiler. Built-in digital decoder and sound generator with mfx and DCC formats. The locomotive and tender are closely coupled. 3 axles powered by coupling rods, traction tires. 3-light front signal made of warm white LEDs.
Length over the buffers 134 mm.
A suitable passenger train can be represented with items 18209 and 18409.
Highlights:
Digital sound with many functions
Model: The locomotive and tender are made of die-cast metal. Bell-shaped armature motor with flywheel in boiler. Built-in digital decoder and sound generator with mfx and DCC formats. The locomotive and tender are closely coupled. 3 axles powered by coupling rods, traction tires. 3-light front signal made of warm white LEDs.
Length over the buffers 134 mm.
A suitable passenger train can be represented with items 18209 and 18409.
119.00 EUR
(RRP*)
99.99 EUR*
Art.-no. Minitrix_18255
Minitrix
Prototype: 2 Italian State Railways (FS) type UIC-X (Bm) express train passenger cars. Use: High-quality long-distance traffic, here in the EC "Venezia" around 2009.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting.
Total length over buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18254 in an exemplary manner.
Model: The car has a close coupler mechanism. Prepared for the subsequent installation of interior lighting.
Total length over buffers 330 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18253 and 18254 in an exemplary manner.
309.00 EUR
(RRP*)
219.99 EUR*
Art.-no. Minitrix_16822
Minitrix
Prototype: Heros Rail Rent GmbH general-purpose locomotive, road number 218 256-6, used by ELBA Logistik GmbH as it looks in March 2016.
Highlights: Digital sound with many functions
Model: The locomotive has a built-in DCC digital decoder and sound generator. Engine with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white LEDs, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars. The headlights change over with the direction of travel and will work in analog operation.
There are also various wet decals included, for example to be able to reproduce the condition of the Graz-Köflacher-Bahn (GKB).
Length over buffers 102 mm.
Highlights: Digital sound with many functions
Model: The locomotive has a built-in DCC digital decoder and sound generator. Engine with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white LEDs, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars. The headlights change over with the direction of travel and will work in analog operation.
There are also various wet decals included, for example to be able to reproduce the condition of the Graz-Köflacher-Bahn (GKB).
Length over buffers 102 mm.
54.99 EUR
(RRP*)
49.99 EUR*
Art.-no. Minitrix_18056
Minitrix
Prototype: 2nd class, DBz of the Deutsche Bahn AG. Built from 1993. Use: Regional express trains.
Model: With kinematics for close coupling. Length over buffers 167 mm. Car from the My Hobby series
Model: With kinematics for close coupling. Length over buffers 167 mm. Car from the My Hobby series
274.90 EUR
(RRP*)
229.99 EUR*
Art.-no. Fleischmann_706484
Fleischmann
Steam locomotive 64 518 of the Deutsche Bundesbahn Era III.
- The model is factory-equipped with a permanently soldered digital decoder
- Fine leading and trailing wheels
- Replica of the version with riveted water tanks
- Die-cast metal chassis
The tank locomotives of the series 64 were developed from 1926 by the Deutsche Reichsbahn-Gesellschaft. After the Second World War, 278 machines remained with the DB. Here they were mainly used in passenger and freight train service on branch lines.
The 64 518 was sold to Eurovapor after it was taken out of service in 1972. In 1980, the Emmental section in Huttwil carried out the processing. After that, she was used for steam trains in Switzerland until 2014.
- The model is factory-equipped with a permanently soldered digital decoder
- Fine leading and trailing wheels
- Replica of the version with riveted water tanks
- Die-cast metal chassis
The tank locomotives of the series 64 were developed from 1926 by the Deutsche Reichsbahn-Gesellschaft. After the Second World War, 278 machines remained with the DB. Here they were mainly used in passenger and freight train service on branch lines.
The 64 518 was sold to Eurovapor after it was taken out of service in 1972. In 1980, the Emmental section in Huttwil carried out the processing. After that, she was used for steam trains in Switzerland until 2014.
102.90 EUR
(RRP*)
92.61 EUR*
Art.-no. Fleischmann_746402
Fleischmann
Two-piece add-on set for the ICE railcar series 411 of the Deutsche Bahn.
The set consists of a 2nd class car, type Bpmbz 411.6 and a 2nd class car, type Bpmz 411.7.
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
The set consists of a 2nd class car, type Bpmbz 411.6 and a 2nd class car, type Bpmz 411.7.
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
102.90 EUR
(RRP*)
92.61 EUR*
Art.-no. Fleischmann_746102
Fleischmann
Two-piece add-on set for the ICE railcar series 411 of the Deutsche Bahn. The set consists of a 1st/2nd class carriage, type ABpmz 411.1 and a 2nd class carriage, type Bpmz 411.8.
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
467.90 EUR
(RRP*)
379.99 EUR*
Art.-no. Fleischmann_746072
Fleischmann
Three-part electric ICE railcar train series 411 of the Deutsche Bahn.
The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.
Update!
- First time with Next18 interface and Next18 sound decoder
- For the first time with a green stripe on the end cars
- Curve-dependent, automatic inclination of the car body
- Model equipped with two function decoders and one sound decoder
- Rigid close coupling with flexible transitions between the cars
- Digitally switchable light and sound functions
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.
Update!
- First time with Next18 interface and Next18 sound decoder
- For the first time with a green stripe on the end cars
- Curve-dependent, automatic inclination of the car body
- Model equipped with two function decoders and one sound decoder
- Rigid close coupling with flexible transitions between the cars
- Digitally switchable light and sound functions
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
342.90 EUR
(RRP*)
308.61 EUR*
Art.-no. Fleischmann_746002
Fleischmann
Three-part electric ICE railcar train series 411 of the Deutsche Bahn.
The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.
updated!
- For the first time with green stripes on the end cars and Next18 interface
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.
updated!
- For the first time with green stripes on the end cars and Next18 interface
- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with flexible transitions between the cars
ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as the 411 and 415 series. These trains are designed for traffic on upgraded lines. Such routes usually have a higher incline and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.
36.90 EUR
(RRP*)
20.99 EUR*
Art.-no. Fleischmann_825748
Fleischmann
Swivel stake car, type Ks, of the Belgian State Railways.
- With round buffers
Courtesy of NMBS Train World
- With round buffers
Courtesy of NMBS Train World
41.90 EUR*
Art.-no. Fleischmann_878104
Fleischmann
3rd class express train passenger car, type C4ü (pr 08), of the Deutsche Bundesbahn.
- Operating condition Era IIIa
- Item No. 878103: Changed company number
- Wagon has rear end discs
- Operating condition Era IIIa
- Item No. 878103: Changed company number
- Wagon has rear end discs
127.90 EUR*
Art.-no. Fleischmann_881902
Fleischmann
3 pcs. Eurofima wagon set of the Czech railway company Regiojet.
- Painted and labeled true to the original
- Inset windows
Regiojet (RJ or RGJ for short) is a private railway company in the Czech Republic based in Brno. It is a subsidiary of Student Agency in cooperation with Keolis. The company also offers long-distance bus travel and is also represented in Germany on the Berlin-Dresden-Prague route. On December 10, 2017, long-distance traffic was expanded to include the Vienna-Brno-Prague route, which means that Regiojet also offers connections in Austria.
- Painted and labeled true to the original
- Inset windows
Regiojet (RJ or RGJ for short) is a private railway company in the Czech Republic based in Brno. It is a subsidiary of Student Agency in cooperation with Keolis. The company also offers long-distance bus travel and is also represented in Germany on the Berlin-Dresden-Prague route. On December 10, 2017, long-distance traffic was expanded to include the Vienna-Brno-Prague route, which means that Regiojet also offers connections in Austria.
43.11 EUR*
Art.-no. Arnold_HN4377
Arnold
RailAdventure/LUXON, observation car, in gray livery, Ep. VI
32.31 EUR*
Art.-no. Arnold_HN6557
Arnold
HN6557 RENFE, 4-axle. Swing roof wagon Uacs with curved silo walls in dark gray livery, "Metransa", Ep. IV
79.90 EUR
(RRP*)
59.99 EUR*
Art.-no. Arnold_HN6558
Arnold
SNCF, 2 pcs. 4-axis. Hinged roof wagon with curved silo walls for grain transport, "Transcéréales CTC" and "Transcéréales Enterprise Marcel Millet", Ep. IV
79.99 EUR*
Art.-no. Modemo_NT172
Modemo
equipped with:
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
79.99 EUR*
Art.-no. Modemo_NT171
Modemo
equipped with:
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
79.99 EUR*
Art.-no. Modemo_NT170
Modemo
equipped with:
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
79.99 EUR*
Art.-no. Modemo_NT169
Modemo
equipped with:
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
- Engine
- Flywheel
- Light change
- Movable pantographs
- Scharfenberg couplings
7.99 EUR
(RRP*)
7.19 EUR*
Art.-no. Faller_272228
Faller
Create atmosphere with timeless design. Model of a park lantern in detailed design, single-bulb, with a hexagonal lamp head. The characteristic shape of the lamp has shaped the image in many parks for decades. The lantern is particularly suitable for atmospheric lighting in old towns, historical scenes and parks. The model is made of delicate plastic and equipped with long-lasting LED technology. Ready for connection for 12 V direct voltage (DC). For operation, use the FALLER transformer 50 VA 50-60Hz, item 180641. Height: 55 mm. Color: Black. Light color: warm white.
17.99 EUR
(RRP*)
16.19 EUR*
Art.-no. Faller_272128
Faller
Create atmosphere with timeless design. A set of 3 park lanterns in a detailed design, one lamp, with a hexagonal lamp head. The characteristic shape of the lamp has shaped the image in many parks for decades. The lantern is particularly suitable for the atmospheric lighting of old towns, historical scenes and parks. The model is made of filigree plastic and equipped with long-lasting LED technology. Ready for connection to 12 V direct current (DC). For operation, use the FALLER transformer 50 VA 50-60Hz, Art. 180641. Height: 55 mm. Color: Black. Light color: warm white. Content: 3 pieces.
14.99 EUR
(RRP*)
13.49 EUR*
Art.-no. Faller_155605
Faller
11 figures
6.00 EUR
(RRP*)
2.99 EUR*
Art.-no. Noch_72212
Noch
Over 2000 products and great crafting tips on 420 pages in English.
29.99 EUR
(RRP*)
14.99 EUR*
Art.-no. Busch_8234
Busch
Construction kit for a road maintenance hall made of real wood. Barred windows, front door and three large swing gates. Doors can also be installed when open (opening 24 x 24 mm each). Realistic roof with filigree rain gutters and downpipes.
Can be illuminated with Busch LEDs 5998.
Size: 106 x 54mm, 40mm.
Can be illuminated with Busch LEDs 5998.
Size: 106 x 54mm, 40mm.
12.99 EUR
(RRP*)
9.99 EUR*
Art.-no. Busch_8378
Busch
Super-detailed models with rotating wheels. Delivered in a sturdy plastic box.
9.99 EUR
(RRP*)
5.99 EUR*
Art.-no. Busch_8379
Busch
Super-detailed models with rotating wheels. Delivered in a sturdy plastic box.
32.90 EUR*
Art.-no. N-Train_21425
N-Train
Rigid RENFE portal in photo-etched brass. Length between poles: L=115mm
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
41.50 EUR*
Art.-no. N-Train_21428
N-Train
Rigid RENFE portal in photo-etched brass. Length between poles: L=190mm
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
38.50 EUR*
Art.-no. N-Train_21427
N-Train
Rigid RENFE portal in photo-etched brass. Length between poles: L=165mm
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
34.50 EUR*
Art.-no. N-Train_21426
N-Train
Rigid RENFE portal in photo-etched brass. Length between poles: L=140mm
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
Finished product, hand assembled and painted.
Includes 4 outriggers (2 inside and 2 outside) and an elastic thread to simulate the guy wires.
25.90 EUR*
Art.-no. N-Train_21429
N-Train
Set of additional outriggers for rigid portals. Crafted from photo-etched brass and hand assembled.
Finished product.
Contains 6 outriggers (3 inside and 3 outside).
Finished product.
Contains 6 outriggers (3 inside and 3 outside).
29.99 EUR*
Art.-no. MicromotorEU_NF045C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann model DB BR 128
Replaces Fleischmann Motor 507312 (Flm motor with augers). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x snail W0.4-4-8
- 2x shaft adapter A24 10->15 28 mm
- 1x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7312, 96 7312
Replaces Fleischmann Motor 507312 (Flm motor with augers). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x snail W0.4-4-8
- 2x shaft adapter A24 10->15 28 mm
- 1x flywheel mass F012
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 7312, 96 7312
29.99 EUR*
Art.-no. MicromotorEU_NF044C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann model DB BR 182, BR 183, BR 190, ÖBB 1016/1116/1216, HKX ES 64 U2, MAV 470, GySEV 1047.5
Replaces engine 50731201 (China engine with cardan couplings). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x cardan coupling SP009
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 731101-731106, 731108-731110, 731171, 731173, 731174, 731179, 731201-731203, 731206, 731271, 731272, 731276, 781208, 781278
Replaces engine 50731201 (China engine with cardan couplings). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x cardan coupling SP009
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 731101-731106, 731108-731110, 731171, 731173, 731174, 731179, 731201-731203, 731206, 731271, 731272, 731276, 781208, 781278
29.99 EUR*
Art.-no. MicromotorEU_NF043C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann model DB BR 182, ÖBB 1016/1116/1216, HKX ES 64 U2, MAV 470, GySEV 1047.5, CFI BR 190, Fuori Muro BR 190
Replaces engine 50731212 (Flm engine with cardan couplings). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x cardan coupling SP009
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 731111, 731112, 731115, 731116, 731119, 731122, 731124-731130, 731172, 731177, 731178, 731182, 731185-731190, 731194-731199, 731207, 731209, 731211-731214, 731216-731218, 731226, 731274, 731277 , 731279, 731283-731285, 731287, 731296, 731297, 731405, 731406, 731475, 731476, 781303, 781304, 781373, 781374, 781405, 781475, 781702, 781703, 781705, 781772, 781773, 781775, 781803, 781804, 781873 , 781874
Replaces engine 50731212 (Flm engine with cardan couplings). The locomotive is not included in the scope of delivery.
Danger! There are 3 versions of motor 507312! (conversion kit NF043C = motor 50731212, conversion kit NF044C = motor 50731201, conversion kit NF045C = motor 507312)
Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S008 flm 16.4 16.4 10 MU v1
- 2x cardan coupling SP009
- 2x shaft adapter A22 10->15 10 mm
- 2x flywheel mass F005
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Fleischmann 731111, 731112, 731115, 731116, 731119, 731122, 731124-731130, 731172, 731177, 731178, 731182, 731185-731190, 731194-731199, 731207, 731209, 731211-731214, 731216-731218, 731226, 731274, 731277 , 731279, 731283-731285, 731287, 731296, 731297, 731405, 731406, 731475, 731476, 781303, 781304, 781373, 781374, 781405, 781475, 781702, 781703, 781705, 781772, 781773, 781775, 781803, 781804, 781873 , 781874
29.99 EUR*
Art.-no. MicromotorEU_NM035C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix NS 1600/1800, DB Schenker 1600, SNCF BB 15000 / BB 22200 / BB 42200 / BB 67300 / BB 67400 / BB 7200.
Replaces engine E114 384. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x shaft adapter A3 10->15 23 mm
- 2x snail W0.3-4-5
- 2x flywheel mass F005
- 2x flywheel mass F007
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11142, 11484, 11488, 12134-12136, 12186-12187, 12189-12190, 12294-12296, 12367, 12470, 16001-16006, 16008-16009, 167701-167061-167061-167061
Replaces engine E114 384. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 2x shaft adapter A3 10->15 23 mm
- 2x snail W0.3-4-5
- 2x flywheel mass F005
- 2x flywheel mass F007
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11142, 11484, 11488, 12134-12136, 12186-12187, 12189-12190, 12294-12296, 12367, 12470, 16001-16006, 16008-16009, 167701-167061-167061-167061
Yours sincerely
Daniel Mrugalski
DM-Toys