Our product palette at 1 view
N-Scale 06/2022: Arnold, Minitrix, Loewe
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
119.99 EUR
(RRP*)
89.99 EUR*
Art.-no. MU_N-T27004
Modellbahn Union
Company number: VT11
The Modellbahn Union N gauge models of the rail bus are based on the well-known Brekina model. Compared to the Brekina model, the Modellbahn Union models have been adapted to the current state of the art and optimized with the current possibilities. The models received the current Next18 interface, loudspeakers and a new drive with a new, smooth-running high-performance motor. The models are analog, DCC / SX digital with and without sound. We install an ESU LokSound 5 decoder with impressive original driving noises in the sound models. The large, hidden loudspeaker, in conjunction with the decoder, produces an impressive sound for N-gauge models. To optimize the digital driving characteristics and the sound functions, a buffer memory with a capacitor capacity of 400µF is built into the sound version of the model. The model is the version of the MAN with two engines. The sound version of the model is of course equipped with the correct twin-engine ESU sound.
Prototype: The rail bus was built by MAN between 1956 and 1969 and delivered to various private railways. It was available in single and twin-engine versions with MAN diesel engines from our own production. Depending on the version, the rail buses had 66-70 seats and an engine output of 150-200 hp. The vehicles were used individually or in double and triple traction. Some companies also used the model to pull freight cars. A total of 60 vehicles were built. Multiple changes of ownership resulted in a large number of color and paint variants. The area of operation extended over the whole of Germany, currently there are still several rail buses in regular museum use.
The models have a 5-pole motor, white-red light change (individually switchable in digital mode), a Next18 digital interface, prototypical addresses, NEM coupler pockets and standard N couplers. The models appear in an edition of only 250 copies each. The LüP is 10.2 cm per vehicle.
The Modellbahn Union N gauge models of the rail bus are based on the well-known Brekina model. Compared to the Brekina model, the Modellbahn Union models have been adapted to the current state of the art and optimized with the current possibilities. The models received the current Next18 interface, loudspeakers and a new drive with a new, smooth-running high-performance motor. The models are analog, DCC / SX digital with and without sound. We install an ESU LokSound 5 decoder with impressive original driving noises in the sound models. The large, hidden loudspeaker, in conjunction with the decoder, produces an impressive sound for N-gauge models. To optimize the digital driving characteristics and the sound functions, a buffer memory with a capacitor capacity of 400µF is built into the sound version of the model. The model is the version of the MAN with two engines. The sound version of the model is of course equipped with the correct twin-engine ESU sound.
Prototype: The rail bus was built by MAN between 1956 and 1969 and delivered to various private railways. It was available in single and twin-engine versions with MAN diesel engines from our own production. Depending on the version, the rail buses had 66-70 seats and an engine output of 150-200 hp. The vehicles were used individually or in double and triple traction. Some companies also used the model to pull freight cars. A total of 60 vehicles were built. Multiple changes of ownership resulted in a large number of color and paint variants. The area of operation extended over the whole of Germany, currently there are still several rail buses in regular museum use.
The models have a 5-pole motor, white-red light change (individually switchable in digital mode), a Next18 digital interface, prototypical addresses, NEM coupler pockets and standard N couplers. The models appear in an edition of only 250 copies each. The LüP is 10.2 cm per vehicle.
24.99 EUR*
Art.-no. MU_N-L00210
Modellbahn Union
The house was made in 3D printing and is already assembled and painted in great detail.
49.99 EUR*
Art.-no. Arnold_HNS4330
Arnold
Special model by Arnold for DM-Toys in a strictly limited one-time edition, valid as long as stocks last!
Company numbers: 51 55 88-81 010-8
Company numbers: 51 55 88-81 010-8
49.99 EUR*
Art.-no. Arnold_HNS4331
Arnold
Special model by Arnold for DM-Toys in a strictly limited one-time edition, valid as long as stocks last!
Company numbers: 51 51 88-80 032-7
Company numbers: 51 51 88-80 032-7
49.99 EUR*
Art.-no. Arnold_HNS4332
Arnold
Special model by Arnold for DM-Toys in a strictly limited one-time edition, valid as long as stocks last!
Company numbers: 51 51 88-80 038-4
Company numbers: 51 51 88-80 038-4
49.99 EUR*
Art.-no. Arnold_HNS4333
Arnold
Special model by Arnold for DM-Toys in a strictly limited one-time edition, valid as long as stocks last!
Company numbers: 51 55 88-81 003-3
Company numbers: 51 55 88-81 003-3
109.00 EUR
(RRP*)
89.99 EUR*
Art.-no. Minitrix_18253
Minitrix
Prototype: 1 MÁV-START WLAB express sleeper car and 1 Bc couchette car. Use: High-quality long-distance transport, here in the EC "Venezia" around 2009.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over the buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18254 and 18255.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. Total length over the buffers 306 mm.
The matching interior lighting: 66616 LED interior lighting.
The car set can be extended with the car sets 18252, 18254 and 18255.
199.99 EUR
(RRP*)
149.99 EUR*
Art.-no. Greenmax_GM4709
Greenmax
Track tamping machine from Plasser Theurer in a yellow version, Era VI
Without NEM interface, we also offer the track tamping machine optionally including a digital decoder from Doehler Haas in DCC or Selectrix! The digital version has a locomotive decoder and a function decoder in the sidecar so that the lighting can be switched.
2-part unit
Adapted slow drive
Drive on a bogie
Headlamps, work lights and driver's cabs illuminated
1 traction tire
Coupling rod for connecting the carriages in three different lengths included so that even tight radii can be negotiated
Without NEM interface, we also offer the track tamping machine optionally including a digital decoder from Doehler Haas in DCC or Selectrix! The digital version has a locomotive decoder and a function decoder in the sidecar so that the lighting can be switched.
2-part unit
Adapted slow drive
Drive on a bogie
Headlamps, work lights and driver's cabs illuminated
1 traction tire
Coupling rod for connecting the carriages in three different lengths included so that even tight radii can be negotiated
99.99 EUR*
Art.-no. Diverse_Goodsmile-933674
Diverse
Content: 1 plastic model kit
Set with low-loader wagon, launch pad, rocket and space transporter. Plastic kit of colored parts, additional decals to the design are included. The model is equipped with plastic wheels and standard N couplers. The model can be assembled after assembly in drive mode or start mode. The space transporter can be built separately.Due to its size, the model is only partially suitable for normal model railway operation.
Kit for experienced modellers. Well illustrated and numbered construction manual with Japanese instructions.
Scale 1/150
Length 32cm
499.99 EUR*
Art.-no. Athearn_30106
Athearn
Model features:
- Shell back with full detailing
- Individually created pipelines, valves, generators, etc.
- Correct operation of eccentric cranks
- Headlights and number boards with directional light change
- Light in the tender
- Five-pole, obliquely anchored armature motor with double flywheels
- Swiveling front and rear motors to pass radius 3
- Analog version
- Blackened metal wheels
The N Scale 4-8-8-4 Big Boy contains extensive English instructions
- Shell back with full detailing
- Individually created pipelines, valves, generators, etc.
- Correct operation of eccentric cranks
- Headlights and number boards with directional light change
- Light in the tender
- Five-pole, obliquely anchored armature motor with double flywheels
- Swiveling front and rear motors to pass radius 3
- Analog version
- Blackened metal wheels
The N Scale 4-8-8-4 Big Boy contains extensive English instructions
599.99 EUR*
Art.-no. Athearn_30205
Athearn
Model features:
- Shell back with full detailing
- Individually created pipelines, valves, generators, etc.
- Correct operation of eccentric cranks
- Headlights and number boards with directional light change
- Light in the tender
- Five-pole, obliquely anchored armature motor with double flywheels
- Swiveling front and rear motors to pass radius 3
- DCC sound decoder
- Blackened metal wheels
The N Scale 4-8-8-4 Big Boy contains extensive English instructions
- Shell back with full detailing
- Individually created pipelines, valves, generators, etc.
- Correct operation of eccentric cranks
- Headlights and number boards with directional light change
- Light in the tender
- Five-pole, obliquely anchored armature motor with double flywheels
- Swiveling front and rear motors to pass radius 3
- DCC sound decoder
- Blackened metal wheels
The N Scale 4-8-8-4 Big Boy contains extensive English instructions
131.31 EUR*
Art.-no. Lemke_LC95004
Lemke
Hobbytrain Flixtrain Set 4, set of 3 passenger coaches Bimz 264, Ep.VI
Set 4:
1. Heros Bimz, white-grey frame, white-grey window frames, complete Flixtrain foiling - Bimz (56 80 22-91 248 D-HEROS)
2. Heros Bimz, white-grey frame, white-grey window frames, gray doors without Leo Express stickers, Flixtrain foiling - Bimz 264.1 (D-HEROS 56 80 22-91 295-6)
3. Heros Bimz, off-white trolley with Flixtrain stickers and the inscription: When I grow up, I'll be green too - Bimz 264.4 (51 80 22-94 880-7 D-HEROS)
The long-distance bus provider Flixbus is putting two more long-distance trains on the rails, doubling its range. From June 21, 2018, the Flixtrain will connect Stuttgart and Berlin up to twice a day. The second train will arrive on the Cologne-Hamburg route on July 19, 2018. The green trains are currently the only competition for the state-owned company in long-distance rail transport, which counted 143 million passengers in its long-distance trains last year. Flixtrain has applied to also run between Berlin and Cologne and Berlin and Munich from mid-December. In cooperation with Arnold, Hobbytrain is realizing the newest and first Flixtrain train in N gauge.
Set 4:
1. Heros Bimz, white-grey frame, white-grey window frames, complete Flixtrain foiling - Bimz (56 80 22-91 248 D-HEROS)
2. Heros Bimz, white-grey frame, white-grey window frames, gray doors without Leo Express stickers, Flixtrain foiling - Bimz 264.1 (D-HEROS 56 80 22-91 295-6)
3. Heros Bimz, off-white trolley with Flixtrain stickers and the inscription: When I grow up, I'll be green too - Bimz 264.4 (51 80 22-94 880-7 D-HEROS)
The long-distance bus provider Flixbus is putting two more long-distance trains on the rails, doubling its range. From June 21, 2018, the Flixtrain will connect Stuttgart and Berlin up to twice a day. The second train will arrive on the Cologne-Hamburg route on July 19, 2018. The green trains are currently the only competition for the state-owned company in long-distance rail transport, which counted 143 million passengers in its long-distance trains last year. Flixtrain has applied to also run between Berlin and Cologne and Berlin and Munich from mid-December. In cooperation with Arnold, Hobbytrain is realizing the newest and first Flixtrain train in N gauge.
299.00 EUR
(RRP*)
249.99 EUR*
Art.-no. Minitrix_16876
Minitrix
Prototype: SBB Cargo road number Re 482 036-1 electric locomotive. Version with 4 pantographs. The locomotive looks as it did around 2012. Use: cross-border freight traffic.
Highlights:
- Lighting with warm white LED
- Cab lighting
- audio
Model: The locomotive has a built-in DCC digital decoder and sound generator. Motor with flywheel, 4 axles powered, traction tires, headlights and tail lights that change with the direction of travel. Kinematics for close coupling. Headlights, driver's cab lighting, high beam and many other light and sound functions can be controlled digitally. Length over the buffers 118 mm.
Highlights:
- Lighting with warm white LED
- Cab lighting
- audio
Model: The locomotive has a built-in DCC digital decoder and sound generator. Motor with flywheel, 4 axles powered, traction tires, headlights and tail lights that change with the direction of travel. Kinematics for close coupling. Headlights, driver's cab lighting, high beam and many other light and sound functions can be controlled digitally. Length over the buffers 118 mm.
279.99 EUR
(RRP*)
219.99 EUR*
Art.-no. Minitrix_16114
Minitrix
Prototype: German Federal Railroad (DB) electric locomotive 111 137-6. Wheel arrangement Bo´Bo´. Year of construction from 1974. Use: S-Bahn traffic.
Model: The locomotive has a built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, engine room lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and work in analogue mode. Length over the buffers 104 mm.
Model: The locomotive has a built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, engine room lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and work in analogue mode. Length over the buffers 104 mm.
225.00 EUR*
Art.-no. Minitrix_15080
Minitrix
Prototype: 5 Laude type Sgmmnss 40' four-axle container transport cars and 1 AAE type Sgmmns 190 four-axle container transport car. Loaded with coils. Operating condition 2017.
Highlights:
new construction
Model: new construction. Die-cast metal chassis, type Y 25 bogies, with close coupling mechanism, loaded with coils.
Seperatly packaged. Additional outer packaging. Total length over buffers 510 mm.
Highlights:
new construction
Model: new construction. Die-cast metal chassis, type Y 25 bogies, with close coupling mechanism, loaded with coils.
Seperatly packaged. Additional outer packaging. Total length over buffers 510 mm.
143.10 EUR*
Art.-no. Minitrix_18707
Minitrix
Prototype: 2x Kkklms 440 without brakeman's platform and 2x Kkklms 440 with brakeman's platform for the German Federal Railroad around 1987. Built from 1933 for the Deutsche Reichsbahn. Use: Transport of moisture-resistant goods.
Model: All of the cars are loaded with different loads. All of the cars have different car numbers and a close coupling mechanism. 2 carriages with platform and 2 carriages without platform. Total length over the buffers 320 mm.
Model: All of the cars are loaded with different loads. All of the cars have different car numbers and a close coupling mechanism. 2 carriages with platform and 2 carriages without platform. Total length over the buffers 320 mm.
109.99 EUR*
Art.-no. Dapol_2D-007-015
Dapol
Equipped with:
- Engine
- Flywheel
- Next18 digital interface
- Light change
- Standard N couplers, NEM coupler pockets
- Engine
- Flywheel
- Next18 digital interface
- Light change
- Standard N couplers, NEM coupler pockets
49.99 EUR
(RRP*)
39.99 EUR*
Art.-no. Tomix_97938
Tomix
equipped with:
- Standard N couplings
209.99 EUR
(RRP*)
149.99 EUR*
Art.-no. Tomix_98444
Tomix
Contents: JR Series 215 Suburban Train (2nd Edition) 4 Cars Set (N scale)
equipped with:
- Engine
- Flywheel
- Light change
- Scharfenberg couplings
equipped with:
- Engine
- Flywheel
- Light change
- Scharfenberg couplings
209.99 EUR
(RRP*)
149.99 EUR*
Art.-no. Tomix_98445
Tomix
Contents: JR Series 215 Suburban Train (2nd Edition) 6 Cars Add-on Set (N scale)
199.99 EUR
(RRP*)
139.99 EUR*
Art.-no. Tomix_98747
Tomix
equipped with:
- Standard N couplings
23.36 EUR*
Art.-no. Lemke_LC3916
Lemke
The VW T2 is the second generation of the VW Transporter, which has been part of the VW model range since 1950. In 1967, the second series replaced the predecessor VW T1 and was built until 1979. The VW T2 was sold more than 2.5 million times during its twelve-year construction period. To this day, the Bulli has cult status and exists in various variants.
Length: 29mm
Length: 29mm
17.98 EUR*
Art.-no. Lemke_LC4330
Lemke
The VW T3 from Volkswagen was the third generation of the VW van. It was produced from 1979 to 1992 and was the last transporter series with rear-wheel drive. After the VW 411/412 from 1968, the T3 was the last new development of a vehicle from Volkswagen with air-cooled rear engine. Like all VW buses, the third generation also bore the type designation Type 2. Within this series, the individual models T1, T2 and T3 were numbered internally.
In our DM-Toys blog by Christian Weiß, there are more interesting photos and information!
In our DM-Toys blog by Christian Weiß, there are more interesting photos and information!
19.99 EUR*
Art.-no. Viessmann_4400a
Viessmann
Kit without drive
With filigree lattice mast made of brass in original painting and printed signal wing. Maintenance-free thanks to LED lighting. Signal images Hp0 and Hp1. Height: 66 mm.
With filigree lattice mast made of brass in original painting and printed signal wing. Maintenance-free thanks to LED lighting. Signal images Hp0 and Hp1. Height: 66 mm.
24.99 EUR*
Art.-no. Viessmann_4401a
Viessmann
Kit without drive
With filigree lattice mast made of brass in a true-to-original paintwork, printed signal wings. Maintenance-free thanks to LED lighting. Signal aspects Hp0 and Hp2. Height: 66 mm.
With filigree lattice mast made of brass in a true-to-original paintwork, printed signal wings. Maintenance-free thanks to LED lighting. Signal aspects Hp0 and Hp2. Height: 66 mm.
17.99 EUR
(RRP*)
14.99 EUR*
Art.-no. Faller_239090
Faller
Limited anniversary model "75 years of FALLER"
Celebrate at lofty heights. Hot air balloon with woven wicker basket and yellow, red and black striped balloon envelope with FALLER retro logo and company lettering on the occasion of the company's 75th anniversary.
This building kit contains: 26 single parts in 4 colors and 1 construction instruction.
Use FALLER EXPERT plastic glue for handicrafts.
Celebrate at lofty heights. Hot air balloon with woven wicker basket and yellow, red and black striped balloon envelope with FALLER retro logo and company lettering on the occasion of the company's 75th anniversary.
This building kit contains: 26 single parts in 4 colors and 1 construction instruction.
Use FALLER EXPERT plastic glue for handicrafts.
399.00 EUR
(RRP*)
319.99 EUR*
Art.-no. Minitrix_66540
Minitrix
Transfer table for sunken installation. Base plate with 2 approach tracks and 6 sidings. Track connections for Minitrix tracks. Platform with motor drive for forward and reverse running in the machine house. New control unit for remote control included. Dimensions: External dimensions: 220 x 300 mm. Base plate cut-out: 205 x 285 mm. max. installation depth: 36 mm.
The length of the rails on the moving stage is 170mm
Alternatively, the traverser can be controlled by an m 84 decoder via Märklin Digital. The connection of the transfer table is described in the instructions.
Goes well with the 66318 locomotive shed.
highlights
- Revised re-edition:
- new control unit.
- new 5-pole motor.
The length of the rails on the moving stage is 170mm
Alternatively, the traverser can be controlled by an m 84 decoder via Märklin Digital. The connection of the transfer table is described in the instructions.
Goes well with the 66318 locomotive shed.
highlights
- Revised re-edition:
- new control unit.
- new 5-pole motor.
609.95 EUR*
Art.-no. Woodland_WST1482
Woodland Scenics
The Scenic Ridge kit contains the terrain and landscaping materials necessary to build a lightweight N (3 'x 6') scale facility. Elevations and inclines / slopes create hills, mountains and low-lying areas. Foam sheets form flat, raised areas for cities and buildings. Use the plaster of paris fabric to create a hard terrain cover. Create and install rocks, add tunnel portals and culverts. Add roads and landscapes with a wide variety of landscape products. The sturdy, finished installation does not require a plywood backing or additional structural support.
The system shown was completed with the add-on product City and Factory Construction Kit ™ (S1485).
Tracks not included.
The colors may differ from the actual product.
The kit contains:
3 pre-printed foam base plates 24 "x 36" (60.9 cm x 91.4 cm)
10 Profile Boards ™ - 8 "x 24" (20.3 cm x 60.9 cm)
6 profile board connectors - 8 "x 3" (20.3 cm x 7.62 cm)
2 foam sheets - 1/2 inch (12.7 cm)
4 foam sheets - 1/4 inch (6 mm)
22 risers - 2 "x 24" (5.08 cm x 60.9 cm)
2 4% gradients 0-1 in x 24 in (0-2.54 cm x 60.9 cm)
2 4% gradients 1 in - 2 in x 24 in (2.54 cm - 5.08 cm x 60.9 cm)
17 Track-Bed ™ strips - each 1/8 "x 24" (3 mm x 60.9 cm)
3 rolls of plaster of paris fabric - 185 dm2 (20 ft2) each
1 roll of plaster cloth - 929 cm2 (5 ft2)
Light Hydrocal® - 1 qt (946 mL)
1 random rock rock mold
1 base rock rock mold
Earth Colors ™ Liquid Pigment / Rock Colors Yellow Ocher, Burnt Umber, Black 1 fl oz (29.5 mL) ea
75 foam nails - 2 "(5.08 cm)
1 roll of Paving Tape ™ (includes spatula) - 1/4 "x 30 '(6mm x 9.14m)
Smooth-It ™ - 1 qt (946 mL)
Sphalt Top Coat ™ - 59.1 ml (2 fl oz)
Concrete Top Layer - 59.1 ml (2 fl oz)
4 cut stone portals
2 concrete passages
Black Base Color - 236 ml (8 fl oz)
Scenic Cement ™ - 946 ml (32 fl oz)
Hob-e-Tac® - 1 fl oz (29.5 mL)
Foam Tack ™ adhesive - 236 ml (8 fl oz)
Earth Primer - 54.4 mL (1.84 fl oz)
12 tree fittings - 3/4 "- 1 1/4" (1.9 cm - 3.17 cm)
12 tree fittings - 3.17 cm - 5.08 cm (1 1/4 "- 2")
18 tree fittings - 2 "- 3" (5.08 cm - 7.62 cm)
Light Green Clump-Foliage ™ - 34.2 in3 (560 cm3)
Med.Green Tuft Leaf - 827 cm3 (50.5 in3)
Dark Green Lump Green - 16.2 in3 (265 cm3)
Medium Green Coarse Lawn - 32.4 in3 (530 cm3)
Green Mixed Lawn - 90.2 in3 (1.47 dm3)
Earth Fine Rolled Lawn - 14.4 in3 (235 cm3)
Earth Fine Rolled Lawn - 7.21 in3 (118 cm3)
Scorched Grass Fine Lawn - 7.21 in3 (118 cm3)
Yellow grass fine lawn - 3.6 in3 (58.9 cm3)
Light gray fine gravel - 25.2 in3 (412 cm3)
Natural Fine Talus - 10.8 in3 (176 cm3)
Harvest Gold Field Grass - 1 g (0.03 oz)
1 foam pen - black
1 spray head
4 stir sticks
1 plastic beaker with sieve lid
2 foam pad applicators
Profile board pattern
The system shown was completed with the add-on product City and Factory Construction Kit ™ (S1485).
Tracks not included.
The colors may differ from the actual product.
The kit contains:
3 pre-printed foam base plates 24 "x 36" (60.9 cm x 91.4 cm)
10 Profile Boards ™ - 8 "x 24" (20.3 cm x 60.9 cm)
6 profile board connectors - 8 "x 3" (20.3 cm x 7.62 cm)
2 foam sheets - 1/2 inch (12.7 cm)
4 foam sheets - 1/4 inch (6 mm)
22 risers - 2 "x 24" (5.08 cm x 60.9 cm)
2 4% gradients 0-1 in x 24 in (0-2.54 cm x 60.9 cm)
2 4% gradients 1 in - 2 in x 24 in (2.54 cm - 5.08 cm x 60.9 cm)
17 Track-Bed ™ strips - each 1/8 "x 24" (3 mm x 60.9 cm)
3 rolls of plaster of paris fabric - 185 dm2 (20 ft2) each
1 roll of plaster cloth - 929 cm2 (5 ft2)
Light Hydrocal® - 1 qt (946 mL)
1 random rock rock mold
1 base rock rock mold
Earth Colors ™ Liquid Pigment / Rock Colors Yellow Ocher, Burnt Umber, Black 1 fl oz (29.5 mL) ea
75 foam nails - 2 "(5.08 cm)
1 roll of Paving Tape ™ (includes spatula) - 1/4 "x 30 '(6mm x 9.14m)
Smooth-It ™ - 1 qt (946 mL)
Sphalt Top Coat ™ - 59.1 ml (2 fl oz)
Concrete Top Layer - 59.1 ml (2 fl oz)
4 cut stone portals
2 concrete passages
Black Base Color - 236 ml (8 fl oz)
Scenic Cement ™ - 946 ml (32 fl oz)
Hob-e-Tac® - 1 fl oz (29.5 mL)
Foam Tack ™ adhesive - 236 ml (8 fl oz)
Earth Primer - 54.4 mL (1.84 fl oz)
12 tree fittings - 3/4 "- 1 1/4" (1.9 cm - 3.17 cm)
12 tree fittings - 3.17 cm - 5.08 cm (1 1/4 "- 2")
18 tree fittings - 2 "- 3" (5.08 cm - 7.62 cm)
Light Green Clump-Foliage ™ - 34.2 in3 (560 cm3)
Med.Green Tuft Leaf - 827 cm3 (50.5 in3)
Dark Green Lump Green - 16.2 in3 (265 cm3)
Medium Green Coarse Lawn - 32.4 in3 (530 cm3)
Green Mixed Lawn - 90.2 in3 (1.47 dm3)
Earth Fine Rolled Lawn - 14.4 in3 (235 cm3)
Earth Fine Rolled Lawn - 7.21 in3 (118 cm3)
Scorched Grass Fine Lawn - 7.21 in3 (118 cm3)
Yellow grass fine lawn - 3.6 in3 (58.9 cm3)
Light gray fine gravel - 25.2 in3 (412 cm3)
Natural Fine Talus - 10.8 in3 (176 cm3)
Harvest Gold Field Grass - 1 g (0.03 oz)
1 foam pen - black
1 spray head
4 stir sticks
1 plastic beaker with sieve lid
2 foam pad applicators
Profile board pattern
279.99 EUR
(RRP*)
199.99 EUR*
Art.-no. Tomix_91036
Tomix
It is a rail set that can easily reproduce the engine depot.
- Comes with parts that can reproduce the engine area such as double track engine cabinet, pantograph inspection table, refueling machine, etc.
- Newly manufactured rails in the garage
- Easy and reliable connection between rails
- Since a pantograph inspection table and a refueling machine are attached, you can reproduce the inspection and repair warehouse of electric locomotives and diesel locomotives.
- By adding an optional engine ward rail extension, it can be used for long trains and railcars.
- The color of the roof of the double-track engine cabinet is dark green, which is different from <4212>.
- Multi-track truss overhead wire pillar is attached
- Point rail adopts synthetic sleeper type manual type
- The point rail can be electrified by installing the optional <0107> point N drive unit (F).
- The sign part of the end rail does not light up
Product content
Straight PC rail S70-PC (F) x 2
Straight PC rail S72.5-PC (F) x 3
Straight PC rail S140-PC (F) x 5
Straight PC rail S280-PC (F) x 2
Curved PC rail C280-15-PC (F) x 1
Curved PC rail C541-15-PC (F) x 1
Manual synthetic sleeper point N-PR541-15-SY (F) x 1
Manual synthetic sleeper point N-PL541-15-SY (F) x 3
Safety siding rail x 1 set
End PC rail E-PC (dummy) (F) x 4
Garage rail S175-PT (F) x 2
Railroad crossing PC rail S35-PC (F) x 2
Wide tram rail S140-WT (F) x 2
Accessories:
Runner parts: Dummy point motor
Runner parts: Dummy point switching machine stand
Runner parts: Railroad crossing runners on the premises
Runner parts: Inspection table floor
Runner parts: Inspection stand handrail
Runner parts: Inspection stand support
Runner parts: Inspection table base
Runner parts: Engine floor
Runner parts: Refueling machine base, etc.
Runner parts: Equipment box
Runner parts: Wheel shape measuring instruments, etc.
Runner parts: Tram rail parts, etc.
Runner parts: Safety siding parts
Runner parts: Multi-track truss overhead wire pillar
Runner parts: Single wire overhead wire pillar
Runner parts: Terminal overhead wire pillar
Runner parts: Wide tram rail / road common joint
Parts: Double track engine cabinet
Sticker: Display, etc.
- Comes with parts that can reproduce the engine area such as double track engine cabinet, pantograph inspection table, refueling machine, etc.
- Newly manufactured rails in the garage
- Easy and reliable connection between rails
- Since a pantograph inspection table and a refueling machine are attached, you can reproduce the inspection and repair warehouse of electric locomotives and diesel locomotives.
- By adding an optional engine ward rail extension, it can be used for long trains and railcars.
- The color of the roof of the double-track engine cabinet is dark green, which is different from <4212>.
- Multi-track truss overhead wire pillar is attached
- Point rail adopts synthetic sleeper type manual type
- The point rail can be electrified by installing the optional <0107> point N drive unit (F).
- The sign part of the end rail does not light up
Product content
Straight PC rail S70-PC (F) x 2
Straight PC rail S72.5-PC (F) x 3
Straight PC rail S140-PC (F) x 5
Straight PC rail S280-PC (F) x 2
Curved PC rail C280-15-PC (F) x 1
Curved PC rail C541-15-PC (F) x 1
Manual synthetic sleeper point N-PR541-15-SY (F) x 1
Manual synthetic sleeper point N-PL541-15-SY (F) x 3
Safety siding rail x 1 set
End PC rail E-PC (dummy) (F) x 4
Garage rail S175-PT (F) x 2
Railroad crossing PC rail S35-PC (F) x 2
Wide tram rail S140-WT (F) x 2
Accessories:
Runner parts: Dummy point motor
Runner parts: Dummy point switching machine stand
Runner parts: Railroad crossing runners on the premises
Runner parts: Inspection table floor
Runner parts: Inspection stand handrail
Runner parts: Inspection stand support
Runner parts: Inspection table base
Runner parts: Engine floor
Runner parts: Refueling machine base, etc.
Runner parts: Equipment box
Runner parts: Wheel shape measuring instruments, etc.
Runner parts: Tram rail parts, etc.
Runner parts: Safety siding parts
Runner parts: Multi-track truss overhead wire pillar
Runner parts: Single wire overhead wire pillar
Runner parts: Terminal overhead wire pillar
Runner parts: Wide tram rail / road common joint
Parts: Double track engine cabinet
Sticker: Display, etc.
119.99 EUR
(RRP*)
79.99 EUR*
Art.-no. Tomix_91037
Tomix
This is an extension set for developing an Engine Depot rail set into a larger Engine Depot.
- Can be added to the separately sold Engine Depot Rail Set to make a larger Engine Depot.
- Comes with parts that can reproduce the engine area such as double track engine cabinet, pantograph inspection table, refueling machine, etc.
- Newly manufactured rails in the garage
- Easy and reliable connection between rails
Product content
Straight PC rail S70-PC (F) x 2
Straight PC rail S140-PC (F) x 4
Garage rail S175-PT (F) x 4AccessoriesRunner parts: Inspection table floorRunner parts: Inspection stand handrailRunner parts: Inspection stand supportRunner parts: Inspection table baseRunner parts: Engine floorRunner parts: Refueling machine base, etc.Runner parts: Equipment boxRunner parts: Single wire overhead wire pillarParts: Double track engine cabinetSticker: Display, etc.
- Can be added to the separately sold Engine Depot Rail Set to make a larger Engine Depot.
- Comes with parts that can reproduce the engine area such as double track engine cabinet, pantograph inspection table, refueling machine, etc.
- Newly manufactured rails in the garage
- Easy and reliable connection between rails
Product content
Straight PC rail S70-PC (F) x 2
Straight PC rail S140-PC (F) x 4
Garage rail S175-PT (F) x 4AccessoriesRunner parts: Inspection table floorRunner parts: Inspection stand handrailRunner parts: Inspection stand supportRunner parts: Inspection table baseRunner parts: Engine floorRunner parts: Refueling machine base, etc.Runner parts: Equipment boxRunner parts: Single wire overhead wire pillarParts: Double track engine cabinetSticker: Display, etc.
6.00 EUR
(RRP*)
2.99 EUR*
Art.-no. Noch_72212
Noch
Over 2000 products and great crafting tips on 420 pages in English.
11.90 EUR*
Art.-no. Loewe_9021
Loewe
Four sheets in the approximate format 70 x 105 mm, self-adhesive, epoch III-IV around 1960 to 1975, based on motifs and models from Germany
11.90 EUR*
Art.-no. Loewe_9022
Loewe
Four sheets of approximate size 70 x 105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from the former GDR
11.90 EUR*
Art.-no. Loewe_9023
Loewe
Four sheets in the approximate format 70 x 105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from Austria
11.90 EUR*
Art.-no. Loewe_9024
Loewe
Four sheets in the approximate format 70 x 105 mm, self-adhesive, epoch IV-V around 1975 to 1990, based on motifs and models from Germany
11.90 EUR*
Art.-no. Loewe_9025
Loewe
Four sheets of approximate size 70 x 105 mm, self-adhesive, epoch II around 1930 to 1945, based on motifs and models from Germany
11.90 EUR*
Art.-no. Loewe_9026
Loewe
Four sheets in approximate format 70 x 105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from Switzerland
11.90 EUR*
Art.-no. Loewe_9027
Loewe
Four sheets in the approximate format 70 x105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from the USA
11.90 EUR*
Art.-no. Loewe_9028
Loewe
Six sheets in the approximate format 70 x105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from the NUREMBERG area
12.90 EUR*
Art.-no. Loewe_9029
Loewe
Six sheets in the approximate format 70 x 105 mm, self-adhesive, epoch III-IV around 1960 to 1975 based on motifs and models from the Dortmund area
Yours sincerely
Daniel Mrugalski
DM-Toys