Our product palette at 1 view
N-Scale 06/2022: Fleischmann, Faller, Modellbahn Union
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
22.99 EUR*
Art.-no. DH_PD10MU-3
Doehler & Haass
A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.
Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each
functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2
The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each
functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2
The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
22.99 EUR*
Art.-no. DH_PD10MU-4
Doehler & Haass
A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.
Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each
functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2
The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each
functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2
The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.
The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
4.99 EUR*
Art.-no. MU_N-X00010
Modellbahn Union
The Modellbahn Union Scharfenberg couplers for N-gauge offer the possibility to retrofit vehicles with and without NEM coupler holder. The couplers are fully functional and compatible with almost every vehicle due to three different lengths.
The set contains 6 couplers in three different lengths: 6mm, 8mm and 11mm, each measured from the mounting point in the NEM shaft to the end of the coupler. Due to the different lengths, the right combination can be found for every application. In addition, there are two short-coupling mechanism kits included, which can be built under vehicles without a NEM mount.
The couplings are connected by simply pushing them together and separated again by pulling. The flexible plastic ensures high durability. German and English instructions are enclosed with the couplings.
The set contains 6 couplers in three different lengths: 6mm, 8mm and 11mm, each measured from the mounting point in the NEM shaft to the end of the coupler. Due to the different lengths, the right combination can be found for every application. In addition, there are two short-coupling mechanism kits included, which can be built under vehicles without a NEM mount.
The couplings are connected by simply pushing them together and separated again by pulling. The flexible plastic ensures high durability. German and English instructions are enclosed with the couplings.
15.99 EUR*
Art.-no. MU_N-X00011
Modellbahn Union
The Modellbahn Union short coupling N-X00011 is 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ® and enables the tolerances of the coupling kinematics of all manufacturers to be optimally adjusted and thus all Track N rolling stock from all manufacturers to be operated reliably. The plastic injection molded couplings which fit perfectly into the NEM 355 shaft are supplied in a set of 12.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
15.99 EUR*
Art.-no. MU_N-X00012
Modellbahn Union
The Union Model Short Coupling N-X00011 has the same length as the Fleischmann PROFI Coupling 9545 ® and enables the tolerances of the coupling kinematics of all manufacturers to be optimally adjusted and thus all Track N rolling stock from all manufacturers to be operated reliably. The plastic injection molded couplings which fit perfectly into the NEM 355 shaft are supplied in a set of 12.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
15.99 EUR*
Art.-no. MU_N-X00013
Modellbahn Union
The Union Model Short Coupling N-X00011 0.5 mm longer than the Fleischmann PROFI Coupling 9545 ® and enables the tolerances of the coupling kinematics of all manufacturers to be optimally adjusted and thus all Track N rolling stock from all manufacturers to be operated reliably. The plastic injection molded couplings which fit perfectly into the NEM 355 shaft are supplied in a set of 12.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
15.99 EUR*
Art.-no. MU_N-X00014
Modellbahn Union
The Modellbahn Union short coupling N-X00011 1.0 mm longer than the Fleischmann PROFI coupling 9545 ® and enables the tolerances of the coupling kinematics of all manufacturers to be optimally adjusted and thus all Track N rolling stock from all manufacturers to be operated reliably. The plastic injection molded couplings which fit perfectly into the NEM 355 shaft are supplied in a set of 12.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
The Modellbahn Union short coupling is available in 4 versions:
- N-X00011 0.5 mm shorter than the Fleischmann PROFI coupling 9545 ®
- N-X00012 identical length as the Fleischmann PROFI coupling 9545 ®
- N-X00013 0.5 mm longer than the Fleischmann PROFI coupling 9545 ®
- N-X00014 1.0 mm longer than the Fleischmann PROFI coupling 9545 ®
Finally, for all N gauge drivers of the Fleischmann PROFI coupling 9545 ® there is the possibility of using the entire rolling stock of all other model railroad brands with the close coupling in a reliable manner. With this system, too large / too small distances are a thing of the past.
1.99 EUR*
Art.-no. MU_N-X00001
Modellbahn Union
Two replacement axles for the ferryboat stake wagon MU_N-G500xx and ferryboat wagon Tcefs 845 MU_N-G660xx. These cars are factory fitted with Finescale wheelsets, with these optional exchange standard wheelsets is an operation on track systems at which the factory Finescale wheelsets cause problems.
Dimensions:
- Tip to tip: 13.9mm
- Diameter incl. Wheel flange: 7,77mm
- Diameter without flange 6.50mm
Dimensions:
- Tip to tip: 13.9mm
- Diameter incl. Wheel flange: 7,77mm
- Diameter without flange 6.50mm
0.99 EUR*
Art.-no. MU_N-X00105
Modellbahn Union
NEM coupling extended by 2 mm for model railway Union Omm52 and all other N-gauge wagons with NEM shaft. Length 13.6mm
0.99 EUR*
Art.-no. MU_N-X00104
Modellbahn Union
NEM coupling extended by 2 mm for model railway Union Omm52 and all other N-gauge wagons with NEM shaft. Length 13.6mm
18.99 EUR*
Art.-no. RAILNSCALE_N2389
RAILNSCALE
The shown Fiat Ducato (1993-2002) is the second generation of one of Europe's most popular vans. These vans were also produced as Peugeot Boxer and Citroën Relay. The model consists of three unpainted parts. This allows painting correctly, and possibly modifying the model.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using the 3D printing process and are supplied unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.
All brands, trade names, service marks and trademarks are the property of their respective owners, they are used for information only. The brands and trademarks on the models have been reproduced only to respect the historical truth and are not advertisements. The intention is to enable a realistic representation and not to specify a relationship with the brand owner.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using the 3D printing process and are supplied unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.
All brands, trade names, service marks and trademarks are the property of their respective owners, they are used for information only. The brands and trademarks on the models have been reproduced only to respect the historical truth and are not advertisements. The intention is to enable a realistic representation and not to specify a relationship with the brand owner.
21.99 EUR*
Art.-no. RAILNSCALE_N2390
RAILNSCALE
The shown Fiat Ducato (1993-2002) is the second generation of one of Europe's most popular vans. These vans were also produced as Peugeot Boxer and Citroën Relay. The model consists of three unpainted parts. This allows painting correctly, and possibly modifying the model.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using the 3D printing process and are supplied unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.
All brands, trade names, service marks and trademarks are the property of their respective owners, they are used for information only. The brands and trademarks on the models have been reproduced only to respect the historical truth and are not advertisements. The intention is to enable a realistic representation and not to specify a relationship with the brand owner.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of plastic using the 3D printing process and are supplied unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.
All brands, trade names, service marks and trademarks are the property of their respective owners, they are used for information only. The brands and trademarks on the models have been reproduced only to respect the historical truth and are not advertisements. The intention is to enable a realistic representation and not to specify a relationship with the brand owner.
25.99 EUR*
Art.-no. RAILNSCALE_N2172F
RAILNSCALE
About the original: The innovative and successful MAN 750 HO was produced and delivered from 1962 to 1974. At the time, the Metrobus was considered a modern city bus that was adapted to the requirements of the time. What was particularly new was the so-called self-supporting construction, in which the chassis and vehicle body formed a unit. With its three doors and longer wheelbase the M11 3t version is typical for the Bogestra transport operator of the cities of Bochum and Gelsenkirchen.
The kit comes with 3 transparent foils.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
The kit comes with 3 transparent foils.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
25.99 EUR*
Art.-no. RAILNSCALE_N2173F
RAILNSCALE
About the original: The innovative and successful MAN 750 HO M11A was produced and delivered from 1962 to 1974. At the time, the Metrobus was considered a modern city bus that was adapted to the requirements of the time. What was particularly new was the so-called self-supporting construction, in which the chassis and vehicle body formed a unit. The 11-meter variant "M11A" was the most common version. The Metrobuses served many cities. Several of these Metrobuses have been preserved. With its open door, it's a gem that's ideal for displaying at a bus stop or train station.
The kit comes with 3 transparent foils.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
The kit comes with 3 transparent foils.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.
The highly detailed parts are made of 3D printed plastic and are delivered unpainted. The kits can be processed and painted with standard tools and colours (e.g. with Revell Email or Revell Aqua Color). The best results are obtained when a primer is used first. Visit www.railnscale.com for building instructions and tips.
All trademarks, all trade names, service marks and logos are the property of their respective owners, they are used only by way of information. The trademarks and logos displayed on the models have been reproduced to respect the historical truth only and are not advertisements. The intention is to make a true-to-life representation possible, and not to pretend a relationship with the owner of the trademark.
349.90 EUR
(RRP*)
159.99 EUR*
Art.-no. Arnold_HN2375
Arnold
ÖBB, Class 42 steam locomotive in black livery, 42 2713, Ep. III
- Company number: 42 2713
- Next18 interface, speaker installation prepared
- Motor with flywheel
- 2 headlights that change with the direction of travel, switchable in digital mode
- Shaft NEM 355 with KK kinematics
- New shape 2019
Additional prototype information:
Built in 1945 by WLF, Florisdorf, Vienna, serial no. 17596
Acceptance 05.11.1946 as 42 2713
1953: ÖBB 42.2713
Retired 04/02/1963
bv unknown
The locomotive looks as it did in the early 1950s.
- Company number: 42 2713
- Next18 interface, speaker installation prepared
- Motor with flywheel
- 2 headlights that change with the direction of travel, switchable in digital mode
- Shaft NEM 355 with KK kinematics
- New shape 2019
Additional prototype information:
Built in 1945 by WLF, Florisdorf, Vienna, serial no. 17596
Acceptance 05.11.1946 as 42 2713
1953: ÖBB 42.2713
Retired 04/02/1963
bv unknown
The locomotive looks as it did in the early 1950s.
341.90 EUR
(RRP*)
279.99 EUR*
Art.-no. Fleischmann_732310
Fleischmann
Electric locomotive BB 26008 of the French State Railways.
New construction 2022!
- Orange/Grey livery
- Version with dual headlights
- Finely detailed model with separately attached plug-in parts
- Filigree design of the two different pantographs
- In digital mode, the headlights can be switched according to the French model
- Digitally switchable sound functions
From 1988 to 1998, 234 class BB 26000 dual system electric locomotives were delivered to the French State Railways. The machines, known under the artificial name "Sybic", are used throughout France in front of all types of trains. These multi-purpose locomotives reach a top speed of 200 km/h and are able to generate an output of 5,600 kW.
New construction 2022!
- Orange/Grey livery
- Version with dual headlights
- Finely detailed model with separately attached plug-in parts
- Filigree design of the two different pantographs
- In digital mode, the headlights can be switched according to the French model
- Digitally switchable sound functions
From 1988 to 1998, 234 class BB 26000 dual system electric locomotives were delivered to the French State Railways. The machines, known under the artificial name "Sybic", are used throughout France in front of all types of trains. These multi-purpose locomotives reach a top speed of 200 km/h and are able to generate an output of 5,600 kW.
309.90 EUR*
Art.-no. Fleischmann_714409
Fleischmann
Class 44 steam locomotive of the Deutsche Bundesbahn.
- For the first time in Era III lettering
- Lower-seated DB Witte smoke deflectors
- Medium driving axles with smaller wheel flanges
- Clear view between boiler and chassis
- Coal tender type 2'2'T34
The standard locomotive program of the Deutsche Reichsbahn-Gesellschaft (DRG) also included the development of a powerful freight locomotive. The BR 44 locomotive with triple engine was expected to be used to transport freight trains up to 1,200 t in low mountain ranges and up to 600 t over steep ramps. In 1926 the first 10 machines with the wheel arrangement 1'E h3 were delivered. It was not until 1937, after the increased demands of train transport, that this locomotive went into series production and was procured in large numbers in various versions. Until they were replaced by modern diesel and electric locomotives, the machines of the 44 series formed the backbone of heavy goods train service throughout Germany.
- For the first time in Era III lettering
- Lower-seated DB Witte smoke deflectors
- Medium driving axles with smaller wheel flanges
- Clear view between boiler and chassis
- Coal tender type 2'2'T34
The standard locomotive program of the Deutsche Reichsbahn-Gesellschaft (DRG) also included the development of a powerful freight locomotive. The BR 44 locomotive with triple engine was expected to be used to transport freight trains up to 1,200 t in low mountain ranges and up to 600 t over steep ramps. In 1926 the first 10 machines with the wheel arrangement 1'E h3 were delivered. It was not until 1937, after the increased demands of train transport, that this locomotive went into series production and was procured in large numbers in various versions. Until they were replaced by modern diesel and electric locomotives, the machines of the 44 series formed the backbone of heavy goods train service throughout Germany.
409.90 EUR*
Art.-no. Fleischmann_714478
Fleischmann
Steam locomotive series 44 of the Austrian Federal Railways (ÖBB).
- Digitally switchable light and sound functions
- Driver's cab interior lighting can be controlled digitally
- Engine lighting with 3 lamps per side can be controlled digitally
- Medium driving axles with smaller wheel flanges
- Clear view between boiler and chassis
- Use in heavy freight train service
With the expansion of the Passau-Wels line for 20 tons of axle pressure, the powerful three-cylinder locomotives of the 44 series could also be used in Austria from 1938. They were indispensable for the heavy, especially long, block trains from West Germany to the Linz steel works. Ore trains from Hieflau were also transported from Amstetten to Linz. After World War II, some locomotives continued to operate. Because of the extensive maintenance, however, they were soon shut down.
- Digitally switchable light and sound functions
- Driver's cab interior lighting can be controlled digitally
- Engine lighting with 3 lamps per side can be controlled digitally
- Medium driving axles with smaller wheel flanges
- Clear view between boiler and chassis
- Use in heavy freight train service
With the expansion of the Passau-Wels line for 20 tons of axle pressure, the powerful three-cylinder locomotives of the 44 series could also be used in Austria from 1938. They were indispensable for the heavy, especially long, block trains from West Germany to the Linz steel works. Ore trains from Hieflau were also transported from Amstetten to Linz. After World War II, some locomotives continued to operate. Because of the extensive maintenance, however, they were soon shut down.
199.90 EUR
(RRP*)
149.99 EUR*
Art.-no. Fleischmann_731130
Fleischmann
Electric locomotive Rh 1116 of the Austrian Federal Railways (ÖBB). Epoch VI.
Motor with flywheel. Richt detailing on the model that has 2 pantographs. Interface according to NEM 651 standards for the adaptation of a digital decoder. Triple headlights and two red LED tail lights that change with the direction of travel. Coupler pocket according to NEM 355 standards with close coupling mechanism.
Motor with flywheel. Richt detailing on the model that has 2 pantographs. Interface according to NEM 651 standards for the adaptation of a digital decoder. Triple headlights and two red LED tail lights that change with the direction of travel. Coupler pocket according to NEM 355 standards with close coupling mechanism.
299.90 EUR
(RRP*)
219.99 EUR*
Art.-no. Fleischmann_731182
Fleischmann
Electric locomotive Rh 1116 of the Austrian Federal Railways (ÖBB). Epoch VI.
Model with built-in load sensing digital decoder and true to the original sound functions from factory.
Motor with flywheel. Rich detailing on the model that has 2 pantographs. Triple headlights and two red LED tail lights that change with the direction of travel. Coupler pocket according to NEM 355 standards with close coupling mechanism.
Model with built-in load sensing digital decoder and true to the original sound functions from factory.
Motor with flywheel. Rich detailing on the model that has 2 pantographs. Triple headlights and two red LED tail lights that change with the direction of travel. Coupler pocket according to NEM 355 standards with close coupling mechanism.
41.90 EUR
(RRP*)
29.99 EUR*
Art.-no. Fleischmann_837705
Fleischmann
Sliding tarpaulin wagon, type Rils, FS, epoch VI.
Redesign 2019!
Painted and labeled true to the original. Coupler pocket according to NEM 355 with close coupling link.
- Finely detailed execution
- With separately attached handle bars
- Realistic structure of the tarpaulin
- Version with rectangular buffers
Prototype: Since the trolley has no stanchions, side skirting boards with a height of 25 millimeters provide protection against lateral displacement of the mostly palletized cargo. There are also 15 lashing eyes on each side on the outer long beams. In addition, additional lashing eyes can be found on the inside of the bulkhead at a height of 3,500 millimeters.
Redesign 2019!
Painted and labeled true to the original. Coupler pocket according to NEM 355 with close coupling link.
- Finely detailed execution
- With separately attached handle bars
- Realistic structure of the tarpaulin
- Version with rectangular buffers
Prototype: Since the trolley has no stanchions, side skirting boards with a height of 25 millimeters provide protection against lateral displacement of the mostly palletized cargo. There are also 15 lashing eyes on each side on the outer long beams. In addition, additional lashing eyes can be found on the inside of the bulkhead at a height of 3,500 millimeters.
41.90 EUR
(RRP*)
29.99 EUR*
Art.-no. Fleischmann_838317
Fleischmann
Open-plan sliding wall wagon, type Habbiins, of the French State Railways.
- Finely detailed execution
- With separately attached handle bars
Prototype: When things get sensitive - these spacious wagons are equipped with sliding walls that can be moved by one person. When open, half of the loading area can be accessed from both sides. Loading and unloading with forklifts is possible from a ramp as well as from level ground. The trolley is particularly suitable for transporting paper rolls, cellulose, sawn timber, wood and fiber boards as well as palletized goods. To secure the load of lying paper rolls, the wagons are equipped with 24 pieces of metal quick-locking wedges, which are stored in storage compartments in each front wall when not in use. The base consists of solebars, head pieces and four closed boxes that connect the two solebars. In the head area, the floor was made of corrugated plate.
- Finely detailed execution
- With separately attached handle bars
Prototype: When things get sensitive - these spacious wagons are equipped with sliding walls that can be moved by one person. When open, half of the loading area can be accessed from both sides. Loading and unloading with forklifts is possible from a ramp as well as from level ground. The trolley is particularly suitable for transporting paper rolls, cellulose, sawn timber, wood and fiber boards as well as palletized goods. To secure the load of lying paper rolls, the wagons are equipped with 24 pieces of metal quick-locking wedges, which are stored in storage compartments in each front wall when not in use. The base consists of solebars, head pieces and four closed boxes that connect the two solebars. In the head area, the floor was made of corrugated plate.
189.90 EUR
(RRP*)
129.99 EUR*
Art.-no. Hobbytrain_H2894
Hobbytrain
In 1927, the DRG ordered a total of 38 E17 locomotives for the medium-duty express train service. They were the first express train locomotives with the 1D1 wheel arrangement. The locomotives were intended for use in southern Germany and central Germany and were assigned to the DBs Munich and Leipzig. While the E17-101, 106 and E17-112 were delivered directly to the BW Leipzig, the locomotives E17-107 to 111 only came to Munich in the spring and summer of 1929. Probably to be available there for the special trains as part of the Oberammergau Passion Play. In December 1929 they were then transferred to Leipzig.
From 1933 they were used by the BW Stuttgart and Ulm. The E17-113 / E17-120 were intended for use in the Silesian network. Five of them came to the Wroclaw BW. After the Second World War, 26 locomotives were still in use at the Deutsche Bundesbahn and two at the Deutsche Reichsbahn Ost. The two DR machines were retired in 1968, while the last 117-106 was only retired on April 24, 1980.
Model properties:
- 5-pole motor with flywheel
- 2 traction tires
- LÜP 99.6 mm
- Weight about 70gr.
- Power consumption over 4 axes
- KKK with NEM coupling socket
- NEM 662 / Next18 interface
- prepared for sound
- 3x front light and red rear light (can be switched off)
- Recommended minimum radius 2
- Finest paintwork and printing
- Consideration of the design differences depending on the era (chassis, housing, fan grille, pantograph, insulators etc.)
From 1933 they were used by the BW Stuttgart and Ulm. The E17-113 / E17-120 were intended for use in the Silesian network. Five of them came to the Wroclaw BW. After the Second World War, 26 locomotives were still in use at the Deutsche Bundesbahn and two at the Deutsche Reichsbahn Ost. The two DR machines were retired in 1968, while the last 117-106 was only retired on April 24, 1980.
Model properties:
- 5-pole motor with flywheel
- 2 traction tires
- LÜP 99.6 mm
- Weight about 70gr.
- Power consumption over 4 axes
- KKK with NEM coupling socket
- NEM 662 / Next18 interface
- prepared for sound
- 3x front light and red rear light (can be switched off)
- Recommended minimum radius 2
- Finest paintwork and printing
- Consideration of the design differences depending on the era (chassis, housing, fan grille, pantograph, insulators etc.)
143.91 EUR*
Art.-no. Hobbytrain_H30153
Hobbytrain
Model features:
- Power consumption across all axes
- Interface NEM 662
- Alternating light white / red, can be switched off
- prepared for sound (ZIMO)
New Vectron and Smartron variants non-stop - with over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. In the meantime, the Vectron is also used by other state railways, namely the DSB and the NS. Elaborately designed machines are now considered good form. Rheincargo is putting its new smartrons with a green eco-electricity design on the route and TXL is transferring the well-known flame design of the Taurus to its new Vectron. WLC also impresses with a new, catchy logo design in the company colors.
- Power consumption across all axes
- Interface NEM 662
- Alternating light white / red, can be switched off
- prepared for sound (ZIMO)
New Vectron and Smartron variants non-stop - with over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. In the meantime, the Vectron is also used by other state railways, namely the DSB and the NS. Elaborately designed machines are now considered good form. Rheincargo is putting its new smartrons with a green eco-electricity design on the route and TXL is transferring the well-known flame design of the Taurus to its new Vectron. WLC also impresses with a new, catchy logo design in the company colors.
224.91 EUR*
Art.-no. Hobbytrain_H30153S
Hobbytrain
Model features:
- Power consumption across all axes
- Interface NEM 662
- Alternating light white / red, can be switched off
- including sound (ZIMO)
New Vectron and Smartron variants non-stop - with over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. In the meantime, the Vectron is also used by other state railways, namely the DSB and the NS. Elaborately designed machines are now considered good form. Rheincargo is putting its new smartrons with a green eco-electricity design on the route and TXL is transferring the well-known flame design of the Taurus to its new Vectron. WLC also impresses with a new, catchy logo design in the company colors.
- Power consumption across all axes
- Interface NEM 662
- Alternating light white / red, can be switched off
- including sound (ZIMO)
New Vectron and Smartron variants non-stop - with over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. In the meantime, the Vectron is also used by other state railways, namely the DSB and the NS. Elaborately designed machines are now considered good form. Rheincargo is putting its new smartrons with a green eco-electricity design on the route and TXL is transferring the well-known flame design of the Taurus to its new Vectron. WLC also impresses with a new, catchy logo design in the company colors.
299.99 EUR
(RRP*)
199.99 EUR*
Art.-no. Jaegerndorfer_JC62120
Jägerndorfer
Electric locomotive Ce 6/8 II Swiss crocodile green SBB era IV - execution of the last state
Model Features:
- all axes driven
- White / white light change
- 5-pin motor
- decoder interface (NEXT18)
- NEM shaft
- Ep.III-IV
Model Features:
- all axes driven
- White / white light change
- 5-pin motor
- decoder interface (NEXT18)
- NEM shaft
- Ep.III-IV
449.99 EUR
(RRP*)
299.99 EUR*
Art.-no. Jaegerndorfer_JC62122
Jägerndorfer
Electric locomotive Ce 6/8 II Swiss crocodile green SBB era IV - execution of the last state
Model Features:
- all axes driven
- White / white light change
- 5-pin motor)
- NEM shaft
- Ep.III-IV
- including sound decoder
Model Features:
- all axes driven
- White / white light change
- 5-pin motor)
- NEM shaft
- Ep.III-IV
- including sound decoder
314.10 EUR*
Art.-no. Minitrix_16087
Minitrix
Prototype: German Railroad, Inc. (DB AG) class 101 express locomotive. Advertising design "Design & Bahn". Locomotive road number 101 003-2. Current operating status 2021. In cooperation with the DB Museum, Nuremberg.
Highlights: Many sound and switching functions
Model: The chassis and body of the locomotive are made of metal. Built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. The headlights and taillights change over with the direction of travel, with warm white LEDs, the cab lighting can be controlled digitally. With NEM coupling shaft. Length over the buffers 119 mm.
Highlights: Many sound and switching functions
Model: The chassis and body of the locomotive are made of metal. Built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. The headlights and taillights change over with the direction of travel, with warm white LEDs, the cab lighting can be controlled digitally. With NEM coupling shaft. Length over the buffers 119 mm.
149.90 EUR
(RRP*)
109.99 EUR*
Art.-no. Minitrix_15950
Minitrix
Prototype: 2 express train passenger cars, 1st class (A9) and 1 express train passenger car with a luggage compartment (A7Dd) for the French State Railways (Société nationale des chemins de fer français / SNCF). In the elegant, ruby red design of the “Le Capitole” express train.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. All of the cars have the lettering "Le Capitole" on the side.
Total length over the buffers 459 mm.
The matching interior lighting: 66616 LED interior lighting.
Model: With kinematics for close coupling. Prepared for the subsequent installation of interior lighting. All of the cars have the lettering "Le Capitole" on the side.
Total length over the buffers 459 mm.
The matching interior lighting: 66616 LED interior lighting.
67.20 EUR
(RRP*)
59.99 EUR*
Art.-no. Tomix_6425
Tomix
rail vacuum cleaner
The classic in a new design! Immediately available, permanently reduced in price!
The classic in a new design! Immediately available, permanently reduced in price!
The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner.
Functionality:
It is operated using 12V DC voltage and being pulled or pushed by a motorized vehicle. The analogue version is not suitable for digital model railways, as the permanently applied current overloads the motor and triggers the heat protection switch.
You can purchase the car directly from us in the digital version. We convert the car with a Doehler and Haass decoder which we solder.
Cart Length: 120mm
89.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Arnold_HN4348
Arnold
SNCF, 2 pcs. Set, car transport wagon DD DEV 66, in green livery with white "carmillon" logo, epoch VI
33.24 EUR*
Art.-no. Faller_239001
Faller
Comprehensive! Multiple-piece set comprised of a rural station with annexed goods shed, a platform and the matching protected level crossing with accessories ensuring the safe crossing of the tracks.
Contents: Station, Platform, Guarded level crossing and accessories
This building kit contains: 233 single parts in 15 colours, 1 paper mask, 2 decorations and 3 construction instructions.
Use for handicrafts FALLER - plastic glue.
Use for handicrafts FALLER - plastic glue.
33.24 EUR*
Art.-no. Faller_239002
Faller
Coal, water, sand and slag! 4-part BW set consisting of a 1-tier locomotive shed, a small coaling system with a swiveling loading crane, a water tower and a corresponding investigation pit with a suitable gantry crane.
Contents: slagging system, engine shed, water tower, coaling system
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 229 single parts in 13 colors, window foil, 1 paper mask and 4 construction instructions.
Use FALLER plastic glue for handicrafts.
Dimensions of the slagging system: 209 x 85 x 57 mm
Dimensions of the locomotive shed: 175 x 52 x 62 mm
Dimensions of the water tower: 58 x 58 x 135 mm
Coal dimensions: 119 x 44 x 66 mm
Contents: slagging system, engine shed, water tower, coaling system
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 229 single parts in 13 colors, window foil, 1 paper mask and 4 construction instructions.
Use FALLER plastic glue for handicrafts.
Dimensions of the slagging system: 209 x 85 x 57 mm
Dimensions of the locomotive shed: 175 x 52 x 62 mm
Dimensions of the water tower: 58 x 58 x 135 mm
Coal dimensions: 119 x 44 x 66 mm
38.99 EUR
(RRP*)
37.04 EUR*
Art.-no. Faller_232374
Faller
Town house with a wide arch and pedestrian passage to the side.
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 147 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction. Use FALLER plastic glue for handicrafts.
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 147 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction. Use FALLER plastic glue for handicrafts.
17.57 EUR*
Art.-no. Faller_232347
Faller
Patinated model of a simple, one-story residential building with plastered façade, gable windows and a slate roof.
This kit contains: 38 items in 4 colors, window foil, 1 curtain mask and 1 construction manual.
This kit contains: 38 items in 4 colors, window foil, 1 curtain mask and 1 construction manual.
17.57 EUR*
Art.-no. Faller_232348
Faller
Model of a simple, single-storey residential building with plastered facade, gable windows and a slate roof. Window sills, plinths and building edges are colored.
This kit contains: 38 items in 4 colors, window foil, 1 curtain mask and 1 construction manual.
Dimensions (L x W x H): 81mm x 41mm x 41mm
This kit contains: 38 items in 4 colors, window foil, 1 curtain mask and 1 construction manual.
Dimensions (L x W x H): 81mm x 41mm x 41mm
18.99 EUR*
Art.-no. Faller_232314
Faller
Idyllic village church with a gable roof and a side tower with a square lantern and a slim Julius Echter pointed helmet.
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 91 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions: 128 x 115 x 170 mm
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 91 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions: 128 x 115 x 170 mm
49.99 EUR
(RRP*)
47.49 EUR*
Art.-no. Faller_232270
Faller
The adjacent building can also be used separately from the tower in a row of townhouses. In the passage of this building, the building kit parts can be used to design the entrance front of a modern fast-food restaurant. The dial of the two clocks can be effectively illuminated from the tower.
br> In the "Old Friends" series you will find selected highlight models, which have been out of print for several years, as limited re-editions at an attractive price.
This building kit contains: 157 single parts in 3 colors, 1 paper mask, 1 decoration and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
br> In the "Old Friends" series you will find selected highlight models, which have been out of print for several years, as limited re-editions at an attractive price.
This building kit contains: 157 single parts in 3 colors, 1 paper mask, 1 decoration and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
42.74 EUR*
Art.-no. Faller_232170
Faller
Two defense towers, two wall sections with a covered battlement and two wall ruins for the design of an old town wall. Variable arrangement possible. Can be combined with the old town tower with wall, item 232171.
Dimensions old town wall: 85 x 20 x 69 mm (2 x)
Dimensions old town wall piece: 24 x 13 x 59 mm (2 x)
Dimensions old town wall defense tower 1: 22 x 21 x 69 mm
Dimensions old town wall defense tower 2: 33 x 25 x 69 mm
This kit contains: 125 individual parts in 3 colors and 1 building instruction.
Use FALLER EXPERT plastic glue for handicrafts.
Dimensions old town wall: 85 x 20 x 69 mm (2 x)
Dimensions old town wall piece: 24 x 13 x 59 mm (2 x)
Dimensions old town wall defense tower 1: 22 x 21 x 69 mm
Dimensions old town wall defense tower 2: 33 x 25 x 69 mm
This kit contains: 125 individual parts in 3 colors and 1 building instruction.
Use FALLER EXPERT plastic glue for handicrafts.
47.49 EUR*
Art.-no. Faller_232171
Faller
Old town tower with a square floor plan, passage and a cantilevered tower crown made of real wood under a four-sided pointed roof. Two wall elements with a covered battlement and a staircase are included for the design of the old town wall. Variable arrangement possible. Can be combined with the old town wall set, item 232170.
This kit contains: 132 parts in 5 colors and 1 decoration. Use FALLER plastic and laser cut glue for handicrafts.
Dimensions: 85 x 20 x 69mm, 24 x 13 x 59mm, 88 x 19 x 68mm, 50 x 50 x 211mm, 30mm
This kit contains: 132 parts in 5 colors and 1 decoration. Use FALLER plastic and laser cut glue for handicrafts.
Dimensions: 85 x 20 x 69mm, 24 x 13 x 59mm, 88 x 19 x 68mm, 50 x 50 x 211mm, 30mm
45.59 EUR*
Art.-no. Faller_222359
Faller
Reproduction manufactured by the laser-cut process of the original two-storey Kürnbach house dating back to 1664 with an aged shingle roof. That rural architecture from the museum village located in Upper Suabia harmoniously combines the beauty and function of that building with curved framework braces, while the small window openings fitted with shutters provide well-balanced proportions and keep the precious stove heat within the house. The adjoining shed with its slate roof can be used in a variety of ways.
This building kit contains: 241 single parts in 5 colours, window foil, 1 paper mask and 1 construction instruction.
Dimensions:
132 x 59,5 x 62 mm
21.79 EUR
(RRP*)
15.99 EUR*
Art.-no. Faller_222213
Faller
For the railway area, the industrial area or the port transshipment point! Coal bays in wood construction for the storage of bulk material. For the realistic design is a bag of coal. This kit contains: 63 items in 3 colors and 1 construction manual.
Use for crafting FALLER EXPERT laser cut adhesive.
Use for crafting FALLER EXPERT laser cut adhesive.
28.99 EUR
(RRP*)
28.49 EUR*
Art.-no. Faller_222167
Faller
Lasercut model of a railcar shed with side extension based on an original in the Black Forest. The covered storage area of the wooden structure can be used, for example, as a bus shelter or for events such as a depot morning pint.
In the »Old acquaintances« series you will find selected highlight models that have been sold out for several years as a limited re-edition at an attractive price.
This kit contains: 54 individual parts in 3 colors, window film and 1 set of building instructions.
Use FALLER EXPERT laser cut glue for handicrafts.
In the »Old acquaintances« series you will find selected highlight models that have been sold out for several years as a limited re-edition at an attractive price.
This kit contains: 54 individual parts in 3 colors, window film and 1 set of building instructions.
Use FALLER EXPERT laser cut glue for handicrafts.
1.32 EUR*
Art.-no. Faller_180670
Faller
with quality bulb, 12-16 V, DC / AC voltage, 55 mA, cable, E 5.5 mm, Ø 8 mm socket.
118.74 EUR*
Art.-no. Faller_162033
Faller
A red MB truck in cooperation with Wiking for the Faller Car System.
99.74 EUR*
Art.-no. Faller_162034
Faller
1 chassis, 4 options! Suitable Car System chassis for the bodies of the MB Citaro bus standing models from TOMYTEC.
Finished models with these paint finishes are available (sold separately):
- Deutsche Bahn Regio Bus, item 974545
- Hamburger Verkehrsverbund HVV, Art. 974552
- Swiss Post, Telephone and Telegraph Company PTT, Art. 974569
- Neutral / silver, item 974576
Finished models with these paint finishes are available (sold separately):
- Deutsche Bahn Regio Bus, item 974545
- Hamburger Verkehrsverbund HVV, Art. 974552
- Swiss Post, Telephone and Telegraph Company PTT, Art. 974569
- Neutral / silver, item 974576
14.99 EUR*
Art.-no. Eurographics_6500-0251
Eurographics
EuroGraphics History of Trains 500-piece puzzle. Package dimensions 35 x 25 x 6 cm. Dimensions of the assembled puzzle 48 x 68 cm. Specially developed cardboard with a resistant linen structure for an even better cohesion of the parts.
0.50 EUR*
Art.-no. Schoenwitz_05-06-01
Schönwitz
End with the cable salad. With this simple order helper you lay the cables under the model railway system clean and clear.
Suitable for our LIFY strands. In each holder, up to 12 cables (max. Cross-section 0.25mm² / 1.3mm) can be clamped. For mounting, the holders are screwed or glued under the system.
Dimensions: length about 40mm - width about 6mm.
Suitable for our LIFY strands. In each holder, up to 12 cables (max. Cross-section 0.25mm² / 1.3mm) can be clamped. For mounting, the holders are screwed or glued under the system.
Dimensions: length about 40mm - width about 6mm.
15.50 EUR*
Art.-no. N-Train_21534
N-Train
DB boom type Re160 for tower mast - S 6x
15.50 EUR*
Art.-no. N-Train_21535
N-Train
DB boom type Re160 for tower mast - M 6x
15.50 EUR*
Art.-no. N-Train_21536
N-Train
DB boom type Re160 for tower mast - L 6x
22.90 EUR*
Art.-no. N-Train_21539
N-Train
DB boom type Re160 for tube boom - S 6x
22.90 EUR*
Art.-no. N-Train_21540
N-Train
DB boom type Re160 for tube boom - M 6x
22.90 EUR*
Art.-no. N-Train_21541
N-Train
DB boom type Re160 for tube boom - L 6x
Yours sincerely
Daniel Mrugalski
DM-Toys