Our product palette at 1 view
N-Scale 04/2022: Fleischmann, Micromotor, Hobbytrain
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
19.99 EUR*
Art.-no. MU_N-i00063
Modellbahn Union
Bridge cranes are cranes that are typically permanently installed in machine houses, production and assembly halls. They consist of one or two solid wall girders or box girders and the bridge, which can be moved along the building. In the transverse direction, along the span of the bridge, runs a trolley with a cable winch, which can lower or raise the suspension device (usually a hook) via a block and tackle (Q: Wikipedia).
The kit includes both the crane and the girders, which can be shortened at will. The span of the bridge is 95mm.
The kit includes both the crane and the girders, which can be shortened at will. The span of the bridge is 95mm.
314.10 EUR*
Art.-no. Minitrix_16984
Minitrix
Prototype: DB Regio (DB AG) class 798 (VT 98) rail bus motor car and class 998 (VS 98) rail bus control car as the "Ulmer Spatz". The locomotive looks as it did around 2008. Two-engine design, built starting in 1955. Used in local transport (secondary lines).
Highlights:
- Clear view
- mfx/DCC decoder with analog recognition
- Sound generator with extensive sound functions
- Continuous lighting with LED
Model: The chassis is made of die-cast metal. Motor with flywheel in railcar, drive on both axles. Digital decoder for DCC and conventional operation. Sound generator with extensive sound functions. The headlights, marker lights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. With rear-view mirrors for one-man operation. Separable special coupling between the vehicles. Motor vehicle can also be used alone. Coupling replicas without function at the ends for retrofitting are included.
Total length over the buffers 175 mm.
Highlights:
- Clear view
- mfx/DCC decoder with analog recognition
- Sound generator with extensive sound functions
- Continuous lighting with LED
Model: The chassis is made of die-cast metal. Motor with flywheel in railcar, drive on both axles. Digital decoder for DCC and conventional operation. Sound generator with extensive sound functions. The headlights, marker lights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. With rear-view mirrors for one-man operation. Separable special coupling between the vehicles. Motor vehicle can also be used alone. Coupling replicas without function at the ends for retrofitting are included.
Total length over the buffers 175 mm.
183.35 EUR*
Art.-no. Piko_40482
Piko
New for 2022: Pressure variant of the G 1206 of the NS in the livery of the LINEAS company.
199.90 EUR*
Art.-no. Fleischmann_781804
Fleischmann
Electric locomotive 1216 012 of the Austrian Federal Railways.
- “Nightjet” theme
- Finely detailed design with four pantographs
- Licensed ÖBB model
The Nightjet locomotive 1216 012 is now the second Taurus locomotive in this design alongside the ÖBB 1116 195. What is striking about the 1216 is the red stripe on the two front sides, which is required for Italian approval.
With the timetable change in December 2016, ÖBB put the Europe-wide night train service into operation under the Nightjet brand name. Since December 2017, Nightjet (NJ) has also been a train type. The transformation of the cars was realized with adhesive foils. The eye-catching design is designed in midnight blue with a hint of a starry sky.
- “Nightjet” theme
- Finely detailed design with four pantographs
- Licensed ÖBB model
The Nightjet locomotive 1216 012 is now the second Taurus locomotive in this design alongside the ÖBB 1116 195. What is striking about the 1216 is the red stripe on the two front sides, which is required for Italian approval.
With the timetable change in December 2016, ÖBB put the Europe-wide night train service into operation under the Nightjet brand name. Since December 2017, Nightjet (NJ) has also been a train type. The transformation of the cars was realized with adhesive foils. The eye-catching design is designed in midnight blue with a hint of a starry sky.
195.90 EUR*
Art.-no. Fleischmann_781309
Fleischmann
Steam locomotive 55 4467 of the Deutsche Reichsbahn.
- Die-cast metal chassis
The class 55.25-56 (formerly Prussian G 8.1), of which almost 5,000 were built, had an output of 1,260 hp and a top speed of 55 km/h, and was mainly used for freight trains and heavy shunting services.
- Die-cast metal chassis
The class 55.25-56 (formerly Prussian G 8.1), of which almost 5,000 were built, had an output of 1,260 hp and a top speed of 55 km/h, and was mainly used for freight trains and heavy shunting services.
161.91 EUR*
Art.-no. Hobbytrain_H2737
Hobbytrain
In the course of the presentation of the new Nightjet generation, 1216 012, among other things, was redesigned as an advertising medium for ÖBB's successful night train division. The new Nightjet push-pull trains will in future be pulled by class 1216 Taurus locomotives. 1216 012 is one of the locomotives registered for Italy and often pulls the so-called Brenner ECs from Munich via Innsbruck to Venice.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
247.41 EUR*
Art.-no. Hobbytrain_H2737S
Hobbytrain
In the course of the presentation of the new Nightjet generation, 1216 012, among other things, was redesigned as an advertising medium for ÖBB's successful night train division. The new Nightjet push-pull trains will in future be pulled by class 1216 Taurus locomotives. 1216 012 is one of the locomotives registered for Italy and often pulls the so-called Brenner ECs from Munich via Innsbruck to Venice.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
161.91 EUR*
Art.-no. Hobbytrain_H2733
Hobbytrain
In the future, the 1216 series electric locomotives will pull the new generation of night and rail jets through Europe. Some examples of the Rh 1216 are already in use with the current Railjet sets and are used on the routes to Italy and the Czech Republic. The locomotives have been given a red warning bar on the front for use in Italy.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
247.41 EUR*
Art.-no. Hobbytrain_H2733S
Hobbytrain
In the future, the 1216 series electric locomotives will pull the new generation of night and rail jets through Europe. Some examples of the Rh 1216 are already in use with the current Railjet sets and are used on the routes to Italy and the Czech Republic. The locomotives have been given a red warning bar on the front for use in Italy.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
148.41 EUR*
Art.-no. Hobbytrain_H2734
Hobbytrain
The 1216 series electric locomotives are mainly used by the international EuroCity long-distance trains.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– prepared for sound
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
233.91 EUR*
Art.-no. Hobbytrain_H2734S
Hobbytrain
The 1216 series electric locomotives are mainly used by the international EuroCity long-distance trains.
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
Model information:
– Next18 decoder interface (NEM 662)
– LED alternating light in the direction of travel red/white (can be switched off manually)
– 2 traction tires, all axles powered
– Equipped with sound ex works
– LÜP 120.5 mm
– NEM coupler mount
– Fine and detailed printing
29.99 EUR*
Art.-no. MicromotorEU_NM023C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with the Minitrix BR 03 model.
Replaces engine 41 2003 24. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-4-5
- 1x flywheel mass F015
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11441, 12003, 12615, 12715, 12830
Model with engine 31 2003 24 has a M0.3 worm!! See conversion kit NM020C
For the Minitrix BR 41, Minitrix used a worm with module M0.3 for motor 41 2003 24. (Micromotor.eu conversion kit NM020C)
With the BR 03 and BR 03.10, Minitrix used a worm with module M0.4 for engine 41 2003 24 (Micromotor.eu conversion kit NM023C)
Replaces engine 41 2003 24. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0812S
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x shaft adapter A4 10->15 12.5 mm
- 1x snail W0.4-4-5
- 1x flywheel mass F015
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11441, 12003, 12615, 12715, 12830
Model with engine 31 2003 24 has a M0.3 worm!! See conversion kit NM020C
For the Minitrix BR 41, Minitrix used a worm with module M0.3 for motor 41 2003 24. (Micromotor.eu conversion kit NM020C)
With the BR 03 and BR 03.10, Minitrix used a worm with module M0.4 for engine 41 2003 24 (Micromotor.eu conversion kit NM023C)
29.99 EUR*
Art.-no. MicromotorEU_NM024C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix V100, BR212, ÖBB Rh 2048, BR 714, EVB 410, E 93, BR 193 New model!.
Replaces motor 31 2117 04. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A7 10->15 15 mm
- 2x snail W0.4-5-6
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11321, 11444, 11453, 11602 001, 12117, 12152, 12206, 12339, 12446, 12538, 12563, 12577-12578, 12635, 12727, 12752, 12755
Attention, for old models with engine 31 2003 24 for (51 1024 00, 51 2048 00, 11077, 12048, 12628, 12937, 71039-71040) see conversion kit NM025G!!
Replaces motor 31 2117 04. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S026 Startrain MU v1
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A7 10->15 15 mm
- 2x snail W0.4-5-6
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 11321, 11444, 11453, 11602 001, 12117, 12152, 12206, 12339, 12446, 12538, 12563, 12577-12578, 12635, 12727, 12752, 12755
Attention, for old models with engine 31 2003 24 for (51 1024 00, 51 2048 00, 11077, 12048, 12628, 12937, 71039-71040) see conversion kit NM025G!!
29.99 EUR*
Art.-no. MicromotorEU_NM026G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix VT 98 (DB, KHH, KVG), VT 798, rail bus, ÖBB 5081 (old model).
Replaces motor 40 0115 00. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1015D
- 1x engine mount S044 Minitrix VT 98 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A9 10->15 8 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 2980,2982,2984-2985, 12897, 12980-12981, 12988-12989, 18013
Replaces motor 40 0115 00. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 1015D
- 1x engine mount S044 Minitrix VT 98 MU v1
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A9 10->15 8 mm
- 2x snail W0.4-4-5
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Minitrix No. 2980,2982,2984-2985, 12897, 12980-12981, 12988-12989, 18013
29.99 EUR*
Art.-no. MicromotorEU_NR006C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Roco V200, BR 220, BR 232, SBB Am 4/4, Renfe 340, DR BR 112, DB BR 112.1, DR BR 143, DB, DR, SOB 243 + VT 11.5, BR 601) .
Replaces engines 85053, 85121, 85135. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002A
- 2x cardan coupling SP003
- 1x flywheel mass F020
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23005, 23007, 23014, 23100-23102, 23216, 23233, 23257, 23268-23269, 23271-23272, 23275-23290, 23410-23411, 23430-23432
Replaces engines 85053, 85121, 85135. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 2x cardan coupling SP002A
- 2x cardan coupling SP003
- 1x flywheel mass F020
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23005, 23007, 23014, 23100-23102, 23216, 23233, 23257, 23268-23269, 23271-23272, 23275-23290, 23410-23411, 23430-23432
29.99 EUR*
Art.-no. MicromotorEU_NR007
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Roco DB V 90, BR 290, Renfe BB 307, SNCF BB 63000.
Replaces motor 85018. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 1x shaft adapter A8 10->12 4.5mm
- 1x shaft adapter A10 10->15 7 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 2152A-2152B, 23224-23227, 23254-23256, 23259, 23264, 23360, 23440
Replaces motor 85018. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 1x shaft adapter A8 10->12 4.5mm
- 1x shaft adapter A10 10->15 7 mm
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 2152A-2152B, 23224-23227, 23254-23256, 23259, 23264, 23360, 23440
29.99 EUR*
Art.-no. MicromotorEU_NR008F
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Roco ETA 180.
Replaces motor 85053. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 1x shaft adapter A9 10->15 8 mm
- 1x flywheel mass F009
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23010-23012, 23390-23391
Replaces motor 85053. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S020 Roco 85020 MU v1
- 1x shaft adapter A9 10->15 8 mm
- 1x flywheel mass F009
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Roco No. 23010-23012, 23390-23391
29.99 EUR*
Art.-no. MicromotorEU_NLM02F
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Lima / Minitrains ET 403 (with 2 powered bogies).
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S038 Mabuchi 010 engine MU
- 2x shaft adapter A22 10->15 10 mm
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Lima / Minitrains No. 163924-163925, 220295-220298
The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x engine mount S038 Mabuchi 010 engine MU
- 2x shaft adapter A22 10->15 10 mm
- 1x flywheel mass F015
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
Lima / Minitrains No. 163924-163925, 220295-220298
29.99 EUR*
Art.-no. MicromotorEU_NF037C
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Fleischmann VT 95, BR 795, Renfe 591, AMFT 551.
Replaces engines 507400, 5074001. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S028 FLM 11.8mm MU v2
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.3-3.5-5
- 1x F016 flywheel
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Fleischmann 7400, 7400xx, 7402, 7402xx, 87400, 87402, 857400, 867400
Replaces engines 507400, 5074001. The locomotive is not included. Installation instructions can be found under Downloads.
Scope of delivery:
- 1 x engine 0816D
- 1x motor mount S028 FLM 11.8mm MU v2
- 1x shaft adapter A10 10->15 7 mm
- 1x shaft adapter A22 10->15 10 mm
- 2x snail W0.3-3.5-5
- 1x F016 flywheel
- 2x wire
Replacement motor / conversion kit suitable for the following locomotives:
- Fleischmann 7400, 7400xx, 7402, 7402xx, 87400, 87402, 857400, 867400
115.90 EUR*
Art.-no. Piko_46505
Piko
New for 2022: The latest decoder generation from PIKO, the PIKO SmartDecoder XP 5.1 - PSD XP 5.1 for short - offers the passionate model railroader a wealth of attractive features.
- Support of all common data formats (e.g. DCC with RailComPlus®, Motorola)
- Plug & Play for uncomplicated and fast registration at suitable digital command stations
- Auto-adaptive motor control
- Extended function mapping up to F68
- Decoder-internal bidirectional coupling for sound-dependent control of the motor and individual function outputs
- Special sound experiences over 8 channels with a duration of up to 8 minutes
- Innovative power management for trouble-free driving
- Improved temperature distribution for longer lifespan of PSD XP 5.1
- Support for all common braking section modes as well as ABC slow travel and ABC automatic shuttle trains
- Support of all common data formats (e.g. DCC with RailComPlus®, Motorola)
- Plug & Play for uncomplicated and fast registration at suitable digital command stations
- Auto-adaptive motor control
- Extended function mapping up to F68
- Decoder-internal bidirectional coupling for sound-dependent control of the motor and individual function outputs
- Special sound experiences over 8 channels with a duration of up to 8 minutes
- Innovative power management for trouble-free driving
- Improved temperature distribution for longer lifespan of PSD XP 5.1
- Support for all common braking section modes as well as ABC slow travel and ABC automatic shuttle trains
76.41 EUR*
Art.-no. Kato_101716-D1
Kato
Decoder set for the Kato ET 425 (10-1716) from Zimo.
The set includes 2x function decoders for the lighting of the end cars and 1x driving decoder
Similar to the Kato decoders EM 13 and FL 12.
The set includes 2x function decoders for the lighting of the end cars and 1x driving decoder
Similar to the Kato decoders EM 13 and FL 12.
112.41 EUR*
Art.-no. Kato_101716-DS
Kato
Sound decoder set for the Kato ET 425 (10-1716) from Zimo.
The set includes 2x function decoders for the lighting in the end cars and 1x sound decoder + loudspeaker
Similar to the Kato decoders EM 13 and FL 12.
The set includes 2x function decoders for the lighting in the end cars and 1x sound decoder + loudspeaker
Similar to the Kato decoders EM 13 and FL 12.
42.74 EUR*
Art.-no. Faller_222107
Faller
Two-stall locomotive shed with modern trapezoidal sheet metal facades. The movable gates of the rectangular shed can be opened and closed with the items servo, art. 180726 and servo control, art. 180725. The kit contains parts for the optional design with a closed front or with a drive-through option.
This kit contains: 224 individual parts in 4 colors, window film, 1 curtain mask and 1 set of building instructions.
Use FALLER EXPERT plastic glue for handicrafts.
Dimensions: 191 x 110 x 76mm
This kit contains: 224 individual parts in 4 colors, window film, 1 curtain mask and 1 set of building instructions.
Use FALLER EXPERT plastic glue for handicrafts.
Dimensions: 191 x 110 x 76mm
9.99 EUR*
(28g, base price 35.68 EUR/100g)
Art.-no. Microscale_MI-9
Microscale
Micro Kristal Klear is the insider tip in model making - no other product achieves such a big difference in the appearance of your models.
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
Yours sincerely
Daniel Mrugalski
DM-Toys