Shipping Destination
Largest N gauge range
All products available
Fast shipping
Shipping Destination
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Manufacturer
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 12/2021: Fleischmann BR 288 & Sybic, train puzzles
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
24.99 EUR*
Art.-no. MU_N-L00271
Modellbahn Union
Beautiful historical Christmas carousel without motorized equipment with 8 deer (8 horses are included as an alternative). The motorized model is available under the number MU_N-L00272.
49.99 EUR*
Art.-no. MU_N-L00272
Modellbahn Union
Beautiful historical Christmas carousel with 8 deer (8 horses are included as an alternative), with 12 volt gear motor. The non-motorized model is available under the number MU_N-L00271.
241.90 EUR
(RRP*)
199.99 EUR*
Art.-no. Fleischmann_725100
Fleischmann
Diesel-electric double locomotive 288 002 of the Deutsche Bundesbahn.
Completely new construction!
¦ Finely detailed model with separately attached plug-in parts
¦ Roofs with additional ventilation grilles in the roof curves
¦ Frame panels with 4 sandboxes each and INDUSI imitation
¦ Direction-dependent triple headlights and two red tail lights
¦ Driver's cab and engine room lighting installed; switchable in digital mode
In 1941 and 1942 a total of four type D 311 double locomotives were put into service by the German Wehrmacht. They were built to transport heavy rail artillery. Two locomotives, the V 188 001 a / b and the V 188 002 a / b, continued to be used by the Deutsche Bundesbahn after the war. A third locomotive served as a spare parts donor. They proved their worth in the heavy freight train and pushing service, mainly on the Spessart ramp. After a generator damage, the V 188 001 had to be shut down as early as 1968. V 188 002, later 288 002, was still in operation in the Franconian region until 1972. In 1973 both machines were scrapped.
Completely new construction!
¦ Finely detailed model with separately attached plug-in parts
¦ Roofs with additional ventilation grilles in the roof curves
¦ Frame panels with 4 sandboxes each and INDUSI imitation
¦ Direction-dependent triple headlights and two red tail lights
¦ Driver's cab and engine room lighting installed; switchable in digital mode
In 1941 and 1942 a total of four type D 311 double locomotives were put into service by the German Wehrmacht. They were built to transport heavy rail artillery. Two locomotives, the V 188 001 a / b and the V 188 002 a / b, continued to be used by the Deutsche Bundesbahn after the war. A third locomotive served as a spare parts donor. They proved their worth in the heavy freight train and pushing service, mainly on the Spessart ramp. After a generator damage, the V 188 001 had to be shut down as early as 1968. V 188 002, later 288 002, was still in operation in the Franconian region until 1972. In 1973 both machines were scrapped.
315.90 EUR
(RRP*)
259.99 EUR*
Art.-no. Fleischmann_732205
Fleischmann
Electric locomotive BB 7200 of the French State Railways.
New construction in 2021!
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
For use on the French direct current network, the French State Railways (SNCF) acquired a total of 237 locomotives of the multi-purpose locomotive BB 7200 from 1976 onwards. The design of the locomotives with the so-called "nez cassé" (broken nose) comes from the hand of the French Paul Arzens, who was responsible for the design of several SNCF locomotives at the time. Starting in 1999, the locomotives were divided into the various business areas and have since been used in a wide variety of train types.
New construction in 2021!
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
For use on the French direct current network, the French State Railways (SNCF) acquired a total of 237 locomotives of the multi-purpose locomotive BB 7200 from 1976 onwards. The design of the locomotives with the so-called "nez cassé" (broken nose) comes from the hand of the French Paul Arzens, who was responsible for the design of several SNCF locomotives at the time. Starting in 1999, the locomotives were divided into the various business areas and have since been used in a wide variety of train types.
315.90 EUR
(RRP*)
259.99 EUR*
Art.-no. Fleischmann_732206
Fleischmann
Electric locomotive BB 22347 of the French State Railways.
New construction in 2021!
¦ Version in silver-gray multiservice design
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
The BB 22200 is a French series of electric locomotives for use both on the SNCF's 1.5 kV electrified direct current network and on the alternating current network electrified with 25 kV 50 Hz. The design of the locomotives with the so-called “nez cassé” (broken nose) comes from the hand of the French Paul Arzens, who was responsible for the design of several SNCF locomotives at the time. Between 1976 and 1986 Alstom built a total of 205 locomotives in six series. Thanks to the multi-system capability and the design as a universal locomotive, the BB 22200 can be used on almost all standard-gauge electrified lines in France in front of freight and passenger trains.
New construction in 2021!
¦ Version in silver-gray multiservice design
¦ Finely detailed model with separately attached plug-in parts
¦ Filigree design of the pantograph
¦ In digital operation with individually switchable headlights or taillights
¦ Digitally switchable sound functions
The BB 22200 is a French series of electric locomotives for use both on the SNCF's 1.5 kV electrified direct current network and on the alternating current network electrified with 25 kV 50 Hz. The design of the locomotives with the so-called “nez cassé” (broken nose) comes from the hand of the French Paul Arzens, who was responsible for the design of several SNCF locomotives at the time. Between 1976 and 1986 Alstom built a total of 205 locomotives in six series. Thanks to the multi-system capability and the design as a universal locomotive, the BB 22200 can be used on almost all standard-gauge electrified lines in France in front of freight and passenger trains.
269.10 EUR*
Art.-no. Minitrix_16496
Minitrix
Prototype: German Federal Railroad (DB) heavy freight locomotive 151 111-2. The car looks as it did around 1978. Use: freight and passenger trains.
Model: The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and work in analogue mode. Attached handle bars. Length over the buffers 122 mm.
One-time series.
Highlights:
- Lots of sound functions.
- Lighting with warm white LEDs.
- Cab lighting.
- The headlights can optionally be switched off.
Model: The locomotive has a built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and work in analogue mode. Attached handle bars. Length over the buffers 122 mm.
One-time series.
Highlights:
- Lots of sound functions.
- Lighting with warm white LEDs.
- Cab lighting.
- The headlights can optionally be switched off.
44.99 EUR*
Art.-no. Minitrix_18420
Minitrix
Prototype: European Rail Rent (ERR) type Sgnss four-axle container flat car, registered in Germany. Loaded with 3 bulk goods containers from the Austrian company Innofreight, A-8600 Bruck an der Mur. Large-volume containers with a capacity of 46 m3. Operating condition around 2019.
Model: Chassis made of die-cast metal, type Y 25 bogies, with kinematics for close coupling, loaded with 3 removable Innofreight containers. Length over the buffers 123 mm.
Model: Chassis made of die-cast metal, type Y 25 bogies, with kinematics for close coupling, loaded with 3 removable Innofreight containers. Length over the buffers 123 mm.
121.50 EUR*
Art.-no. Minitrix_15072
Minitrix
Prototype: 3 four-axle flat cars with type Rs stanchions from the SNCF. Loaded with different swap bodies: 20-foot containers, 20-foot tank containers and newly designed 40-foot containers. The car looks as it did around 2004.
Highlights:
New 40-foot container
Model: The trucks are type Y 25, with close coupling kinematics, and are loaded with different containers. Total length over the buffers 372 mm.
Highlights:
New 40-foot container
Model: The trucks are type Y 25, with close coupling kinematics, and are loaded with different containers. Total length over the buffers 372 mm.
179.99 EUR*
Art.-no. Kato_7074062
Kato
Model features:
Kato article number 74062
· Passable minimum radius: R150
Passable slope: 5%
External dimensions: approx. 103 x 19 x 26 mm
Weight: approx. 79 g
Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can easily be replaced by the Kato Glacier coupling (which can be seen in the photo)
· Can be combined with numerous RhB coaches, e. B. Glacier Express and EW I
· Locomotive without digital interface, but optionally available from us with a decoder from DH
Kato article number 74062
· Passable minimum radius: R150
Passable slope: 5%
External dimensions: approx. 103 x 19 x 26 mm
Weight: approx. 79 g
Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can easily be replaced by the Kato Glacier coupling (which can be seen in the photo)
· Can be combined with numerous RhB coaches, e. B. Glacier Express and EW I
· Locomotive without digital interface, but optionally available from us with a decoder from DH
179.99 EUR*
Art.-no. Kato_7074065
Kato
A cooperation print from the Hockey Club Davos and the Graubündner Kantonalbank with the slogan "One Club, One Track, One Bank"
Model features:
Kato article number 74065
· Passable minimum radius: R150
Passable slope: 5%
External dimensions: approx. 103 x 19 x 26 mm
Weight: approx. 79 g
Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can easily be replaced by the Kato Glacier coupling (which can be seen in the photo)
· Can be combined with numerous RhB coaches, e. B. Glacier Express and EW I
· Locomotive without digital interface, but optionally available from us with a decoder from DH
Model features:
Kato article number 74065
· Passable minimum radius: R150
Passable slope: 5%
External dimensions: approx. 103 x 19 x 26 mm
Weight: approx. 79 g
Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can easily be replaced by the Kato Glacier coupling (which can be seen in the photo)
· Can be combined with numerous RhB coaches, e. B. Glacier Express and EW I
· Locomotive without digital interface, but optionally available from us with a decoder from DH
680.00 EUR
(RRP*)
499.99 EUR*
Art.-no. Eichhorn_11002
Eichhorn
Electric locomotive of the DR from Skoda
DUMPLING PRESS
Version of the DR as BR 230
Small series model with LED lighting, oscillating weight and the finest pantographs
Skoda electric locomotive of the DR series 230
(optionally with digital decoder)
Packed in a noble wooden box, strictly limited series
649.99 EUR*
Art.-no. Eichhorn_11001-Set
Eichhorn
4-piece train set electric locomotive of the DR from Skoda with 3 CD Kühn passenger cars
DUMPLING PRESS
Version of the DR as BR 180
Small series model with LED lighting, oscillating weight and the finest pantographs
Skoda electric locomotive of the DR series 180
(optionally with digital decoder)
Packed in a noble wooden box, strictly limited series
DUMPLING PRESS
Version of the DR as BR 180
Small series model with LED lighting, oscillating weight and the finest pantographs
Skoda electric locomotive of the DR series 180
(optionally with digital decoder)
Packed in a noble wooden box, strictly limited series
13.99 EUR*
Art.-no. Beli-Beco_118951
Beli-Beco
Illuminated advertising pillar made in Germany for operation on 19V direct / alternating current with pre-assembled cables.
33.24 EUR*
Art.-no. Faller_239002
Faller
Coal, water, sand and slag! 4-part BW set consisting of a 1-tier locomotive shed, a small coaling system with a swiveling loading crane, a water tower and a corresponding investigation pit with a suitable gantry crane.
Contents: slagging system, engine shed, water tower, coaling system
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 229 single parts in 13 colors, window foil, 1 paper mask and 4 construction instructions.
Use FALLER plastic glue for handicrafts.
Dimensions of the slagging system: 209 x 85 x 57 mm
Dimensions of the locomotive shed: 175 x 52 x 62 mm
Dimensions of the water tower: 58 x 58 x 135 mm
Coal dimensions: 119 x 44 x 66 mm
Contents: slagging system, engine shed, water tower, coaling system
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 229 single parts in 13 colors, window foil, 1 paper mask and 4 construction instructions.
Use FALLER plastic glue for handicrafts.
Dimensions of the slagging system: 209 x 85 x 57 mm
Dimensions of the locomotive shed: 175 x 52 x 62 mm
Dimensions of the water tower: 58 x 58 x 135 mm
Coal dimensions: 119 x 44 x 66 mm
37.99 EUR*
Art.-no. Faller_232181
Faller
Large, two-storey accommodation quarter with a light facade, hipped roof and dormers.
This building kit contains: 217 single parts in 5 colors, window foil, 1 paper mask and 1 construction instruction.
Use FALLER EXPERT plastic glue for handicrafts.
Dimensions: 165 x 74 x 87 mm
This building kit contains: 217 single parts in 5 colors, window foil, 1 paper mask and 1 construction instruction.
Use FALLER EXPERT plastic glue for handicrafts.
Dimensions: 165 x 74 x 87 mm
18.99 EUR*
Art.-no. Faller_232314
Faller
Idyllic village church with a gable roof and a side tower with a square lantern and a slim Julius Echter pointed helmet.
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 91 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions: 128 x 115 x 170 mm
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 91 single parts in 6 colors, window parts, 1 paper mask and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions: 128 x 115 x 170 mm
49.99 EUR
(RRP*)
47.49 EUR*
Art.-no. Faller_232270
Faller
The adjacent building can also be used separately from the tower in a row of townhouses. In the passage of this building, the building kit parts can be used to design the entrance front of a modern fast-food restaurant. The dial of the two clocks can be effectively illuminated from the tower.
br> In the "Old Friends" series you will find selected highlight models, which have been out of print for several years, as limited re-editions at an attractive price.
This building kit contains: 157 single parts in 3 colors, 1 paper mask, 1 decoration and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
br> In the "Old Friends" series you will find selected highlight models, which have been out of print for several years, as limited re-editions at an attractive price.
This building kit contains: 157 single parts in 3 colors, 1 paper mask, 1 decoration and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
56.99 EUR*
Art.-no. Faller_222220
Faller
Large shoe factory in a two-story brick building with facing gables, pilaster strips and small arched friezes for the visual structure of the floors as well as two one-story extensions with a sawtooth roof.
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 254 single parts in 5 colors, window parts, 6 curtain masks and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions (L x W x H): 184mm x 229mm x 90mm
In the "Old Friends" series you will find selected highlight models that have been out of print for several years as limited re-editions at an attractive price.
This building kit contains: 254 single parts in 5 colors, window parts, 6 curtain masks and 1 construction instruction.
Use FALLER plastic glue for handicrafts.
Dimensions (L x W x H): 184mm x 229mm x 90mm
14.99 EUR*
Art.-no. Eurographics_6000-0090
Eurographics
EuroGraphics steam locomotives 1000-piece puzzle. Package dimensions 35 x 25 x 6 cm. Dimensions of the assembled puzzle 48 x 68 cm. Steam locomotives from the Kingdom of Bavaria, Prussia, but also from England, Switzerland and the USA are shown here with detailed illustrations. It contains interesting information such as class, length, weight and maximum speed. Specially developed cardboard with a resistant linen structure for an even better cohesion of the parts.
14.99 EUR*
Art.-no. Eurographics_6000-0251
Eurographics
EuroGraphics History of Trains 1000-piece puzzle. Package dimensions 35 x 25 x 6 cm. Dimensions of the assembled puzzle 48 x 68 cm. Specially developed cardboard with a resistant linen structure for an even better cohesion of the parts.
9.99 EUR*
Art.-no. Eurographics_6100-0090
Eurographics
- For children from 5 years
- From the Smart Kids Collection
- Size of the finished puzzle: 48x33cm
- Number of pieces: 100
- From the Smart Kids Collection
- Size of the finished puzzle: 48x33cm
- Number of pieces: 100
14.99 EUR*
Art.-no. Eurographics_6500-0251
Eurographics
EuroGraphics History of Trains 500-piece puzzle. Package dimensions 35 x 25 x 6 cm. Dimensions of the assembled puzzle 48 x 68 cm. Specially developed cardboard with a resistant linen structure for an even better cohesion of the parts.
11.90 EUR*
Art.-no. Diverse_modellbahn-schweiz-T4
Diverse
76-page German model railway magazine with a focus on Switzerland.
Yours sincerely
Daniel Mrugalski
DM-Toys