Our product palette at 1 view
N-Scale 07/2021: Circus, MAN , DeAgostini bargains
Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
119.99 EUR*
Art.-no. MU_N-T27007
Modellbahn Union
Information about the prototype:
In 2011, the Chiemgauer Lokalbahn acquired the railcar from the SWEG and worked on it on a voluntary basis until 2014. Since then it has been based in Obing.
- General inspection valid until 2020
- Regular use in regular passenger and special train operations between Bad Endorf and Obing
- The technical equipment of the vehicle also allows use outside of our railway line
Company number: VT2.11
The Modellbahn Union N gauge models of the rail bus are based on the well-known Brekina model. Compared to the Brekina model, the Modellbahn Union models have been adapted to the current state of the art and optimized with the current possibilities. The models received the current Next18 interface, loudspeakers and a new drive with a new, smooth-running high-performance motor. The models are analog, DCC / SX digital with and without sound. We install an ESU LokSound 5 decoder with impressive original driving noises in the sound models. The large, hidden loudspeaker, in conjunction with the decoder, produces an impressive sound for N-gauge models. To optimize the digital driving characteristics and the sound functions, a buffer memory with a capacitor capacity of 400µF is built into the sound version of the model. The model is the version of the MAN with two engines. The sound version of the model is of course equipped with the correct twin-engine ESU sound.
Prototype: The rail bus was built by MAN between 1956 and 1969 and delivered to various private railways. It was available in single and twin-engine versions with MAN diesel engines from our own production. Depending on the version, the rail buses had 66-70 seats and an engine output of 150-200 hp. The vehicles were used individually or in double and triple traction. Some companies also used the model to pull freight cars. A total of 60 vehicles were built. Multiple changes of ownership resulted in a large number of color and paint variants. The area of operation extended over the whole of Germany, currently there are still several rail buses in regular museum use.
The models have a 5-pole motor, white-red light change (individually switchable in digital mode), a Next18 digital interface, prototypical addresses, NEM coupler pockets and standard N couplings. The models appear in an edition of only 250 copies each. The LüP is 10.2 cm per vehicle.
In 2011, the Chiemgauer Lokalbahn acquired the railcar from the SWEG and worked on it on a voluntary basis until 2014. Since then it has been based in Obing.
- General inspection valid until 2020
- Regular use in regular passenger and special train operations between Bad Endorf and Obing
- The technical equipment of the vehicle also allows use outside of our railway line
Company number: VT2.11
The Modellbahn Union N gauge models of the rail bus are based on the well-known Brekina model. Compared to the Brekina model, the Modellbahn Union models have been adapted to the current state of the art and optimized with the current possibilities. The models received the current Next18 interface, loudspeakers and a new drive with a new, smooth-running high-performance motor. The models are analog, DCC / SX digital with and without sound. We install an ESU LokSound 5 decoder with impressive original driving noises in the sound models. The large, hidden loudspeaker, in conjunction with the decoder, produces an impressive sound for N-gauge models. To optimize the digital driving characteristics and the sound functions, a buffer memory with a capacitor capacity of 400µF is built into the sound version of the model. The model is the version of the MAN with two engines. The sound version of the model is of course equipped with the correct twin-engine ESU sound.
Prototype: The rail bus was built by MAN between 1956 and 1969 and delivered to various private railways. It was available in single and twin-engine versions with MAN diesel engines from our own production. Depending on the version, the rail buses had 66-70 seats and an engine output of 150-200 hp. The vehicles were used individually or in double and triple traction. Some companies also used the model to pull freight cars. A total of 60 vehicles were built. Multiple changes of ownership resulted in a large number of color and paint variants. The area of operation extended over the whole of Germany, currently there are still several rail buses in regular museum use.
The models have a 5-pole motor, white-red light change (individually switchable in digital mode), a Next18 digital interface, prototypical addresses, NEM coupler pockets and standard N couplings. The models appear in an edition of only 250 copies each. The LüP is 10.2 cm per vehicle.
79.99 EUR*
Art.-no. MU_N-L00169
Modellbahn Union
Dimensions: 200 (diameter) x 130mm
Big top with cash register, fence and enclosure elements. The tent is made of real fabric and has an interior with benches. The kit also includes a total of more than 1 meter of fence and 16 enclosure elements.
The tent is the center of the circus. The tent also includes various wagons and accessories, which can be found here:
Zirkus-Projekt
Big top with cash register, fence and enclosure elements. The tent is made of real fabric and has an interior with benches. The kit also includes a total of more than 1 meter of fence and 16 enclosure elements.
The tent is the center of the circus. The tent also includes various wagons and accessories, which can be found here:
Zirkus-Projekt
7.99 EUR*
Art.-no. MU_N-L00259
Modellbahn Union
Simple garden fence. Total length of the elements 930 mm. Also suitable for a circus.
7.99 EUR*
Art.-no. MU_N-L00260
Modellbahn Union
24 fence elements of 16.5x12.5mm each. The elements can be used, for example, as a circus enclosure or site fence and are supplied complete with 2 feet per element. Also suitable for a circus.
49.99 EUR*
Art.-no. MU_N-S00050
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
49.99 EUR*
Art.-no. MU_N-S00051
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00055
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00056
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00057
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00060
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00063
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
29.99 EUR*
Art.-no. MU_N-S00070
Modellbahn Union
The cars are delivered without lettering. The lettering can be purchased separately under item number MU_N-A00647.
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with commercially available tools and colors (e.g. with Revell Email or Revell Aqua Color).
12.34 EUR*
Art.-no. Preiser_79710
Preiser
Also suitable for a circus..Carefully hand-painted in plastic
207.00 EUR*
Art.-no. Minitrix_16983
Minitrix
Prototype: German Federal Railroad (DB) internal combustion engine (VT) 798 668-0 "railroad experience". Twin-engine design, year of construction from 1955. Used on the occasion of "150 Years of the German Railways" 1985.
Highlights:
- Free perspective
- LED interior lighting
Model: The chassis is made of die-cast metal. Motor with flywheel, drive on both axles. Built-in digital decoder DCC, suitable for conventional operation. The headlights, taillights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. Coupling replicas without function at the ends for retrofitting are included. Length over the buffers 87 mm.
Highlights:
- Free perspective
- LED interior lighting
Model: The chassis is made of die-cast metal. Motor with flywheel, drive on both axles. Built-in digital decoder DCC, suitable for conventional operation. The headlights, taillights and interior lighting with maintenance-free LEDs will work in conventional operation and can be controlled digitally. Coupling replicas without function at the ends for retrofitting are included. Length over the buffers 87 mm.
369.00 EUR
(RRP*)
332.99 EUR*
Art.-no. Minitrix_15458
Minitrix
Prototype: 10 four-axle, open hopper cars type Erz IIId of the OOtz 41 of the German Federal Railroad (DB). Version with a high upper box, two unloading flaps on each long side and a brakeman's platform on the front. Used to transport iron ore. Welded press sheet bogies of the standard design, with welded girders as reinforcement. The car looks as it did in the early 1960s.
Highlights:
- Loaded with real iron ore.
- Many different company numbers.
- Ideal for block trains.
- Retail sale in the display.
Model: The self-unloading car has a detailed design with different car numbers. All of the cars have a brakeman's platform and an adjusting wheel on the front. Hopper wagons are loaded with cargo inserts and real iron ore in true-to-scale grain size. All of the cars have close coupling kinematics. All of the cars are individually packaged. Length over the buffers per car 64 mm.
Highlights:
- Loaded with real iron ore.
- Many different company numbers.
- Ideal for block trains.
- Retail sale in the display.
Model: The self-unloading car has a detailed design with different car numbers. All of the cars have a brakeman's platform and an adjusting wheel on the front. Hopper wagons are loaded with cargo inserts and real iron ore in true-to-scale grain size. All of the cars have close coupling kinematics. All of the cars are individually packaged. Length over the buffers per car 64 mm.
49.49 EUR*
Art.-no. Minitrix_18413
Minitrix
Prototype: German Federal Railroad (DB), 2nd class commuter car (Bnb 719) around 1991. Nickname "Silberling".
Model: With kinematics for close coupling. Prepared for retrofitting interior lighting. Length over buffers 165 mm.
The matching interior lighting: 66616 LED interior lighting.
Model: With kinematics for close coupling. Prepared for retrofitting interior lighting. Length over buffers 165 mm.
The matching interior lighting: 66616 LED interior lighting.
47.69 EUR*
Art.-no. Minitrix_18414
Minitrix
Prototype: 1 type Avümz 111 compartment car as it looked in the summer of 1974 for the German Federal Railroad (DB) with the route Hanover - Bielefeld - Hamm - Dortmund - Düsseldorf - Cologne.
Model: The car has a close coupling mechanism. Prepared for the subsequent installation of interior lighting. Length over the buffers 165 mm.
The matching interior lighting: 66616 LED interior lighting.
You can find the right locomotive under item number 16100, class 112.
Model: The car has a close coupling mechanism. Prepared for the subsequent installation of interior lighting. Length over the buffers 165 mm.
The matching interior lighting: 66616 LED interior lighting.
You can find the right locomotive under item number 16100, class 112.
47.69 EUR*
Art.-no. Minitrix_15899
Minitrix
Prototype: German State Railroad (DR) type Bimdz 2423 express train passenger car, 2nd class, as IR 2637 Berlin-Lichtenberg - Munich.
Model: The car has a close coupling mechanism. Prepared for the subsequent installation of interior lighting. Length over the buffers 165 mm.
The matching interior lighting: 66612 LED interior lighting.
Model: The car has a close coupling mechanism. Prepared for the subsequent installation of interior lighting. Length over the buffers 165 mm.
The matching interior lighting: 66612 LED interior lighting.
37.91 EUR*
Art.-no. DH_DH18
Doehler & Haass
DH18A 2nd generation - vehicle decoder 1.5 A
- Operating mode SX1, SX2, DCC, MM, DC-analog
- Dimensions [mm] 9.7 * 8.9 * 2.8
- Total load capacity 1.5 A
- Max. Motor current 1.5 A
- Max. Driving voltage 30 V
- LV, LR (dimmable) 150 mA each
- AUX1, AUX2 (dimmable) 300 mA each
- AUX3, AUX4 not amplified
- AUX5, AUX6 unamplified
- with SUSI interface (if AUX3 / AUX4 deactivated)
Product features and functions
- For optional operation with a conventional DC driving device, digital systems according to SelecTRIX 1 and 2 or DCC format
- The switchover between analog and digital operation takes place automatically
- In digital mode, the last programmed system is used (it is not switched automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- The latest generation of load control, resulting in particularly smooth control behavior
- Different control variants for optimal adaptation to the engine
- Internally 127 speed steps
- Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
- Block section operation with simple diodes in digital operation
- Light and function outputs can be dimmed and activated analogously
- Shunting
- Motor, light and track connections can be exchanged electronically
- All function outputs freely programmable
- temperature protection
- Reset function for DCC and SX2
- The decoder can be updated
- The update (firmware download from the Internet is free) is possible with the decoder installed on the track (no need to open the vehicle) and is carried out either via the FCC digital center or the programmer. If no corresponding hardware is available, Doehler & Haass will provide a programmer on loan on request.
- The vehicle decoder DH18A supports braking with asymmetrical digital voltage (four diodes in series and one anti-parallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
- Operating mode SX1, SX2, DCC, MM, DC-analog
- Dimensions [mm] 9.7 * 8.9 * 2.8
- Total load capacity 1.5 A
- Max. Motor current 1.5 A
- Max. Driving voltage 30 V
- LV, LR (dimmable) 150 mA each
- AUX1, AUX2 (dimmable) 300 mA each
- AUX3, AUX4 not amplified
- AUX5, AUX6 unamplified
- with SUSI interface (if AUX3 / AUX4 deactivated)
Product features and functions
- For optional operation with a conventional DC driving device, digital systems according to SelecTRIX 1 and 2 or DCC format
- The switchover between analog and digital operation takes place automatically
- In digital mode, the last programmed system is used (it is not switched automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- The latest generation of load control, resulting in particularly smooth control behavior
- Different control variants for optimal adaptation to the engine
- Internally 127 speed steps
- Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
- Block section operation with simple diodes in digital operation
- Light and function outputs can be dimmed and activated analogously
- Shunting
- Motor, light and track connections can be exchanged electronically
- All function outputs freely programmable
- temperature protection
- Reset function for DCC and SX2
- The decoder can be updated
- The update (firmware download from the Internet is free) is possible with the decoder installed on the track (no need to open the vehicle) and is carried out either via the FCC digital center or the programmer. If no corresponding hardware is available, Doehler & Haass will provide a programmer on loan on request.
- The vehicle decoder DH18A supports braking with asymmetrical digital voltage (four diodes in series and one anti-parallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
29.99 EUR*
Art.-no. MicromotorEU_NR002
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Roco BR 215 DB, SNCB Reeks 59.
Replaces Roco motor 85027 & 85028. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads.
Scope of delivery:
- 1x motor 1020D
- 1x motor mount S030 Roco 85025 85027 85028 MU v1
- 1x A8 10-> 15 4.5 mm
- 1x A9 10-> 15 8 mm
- 2x brass thread inserts M1.6x2
- 2x strand
Replacement motor / conversion kit fit the following locomotives:
- Roco 2150
- Roco 2156
- Roco 23218
- Roco 23219
- Roco 23220
- Roco 23221
- Roco 23222
- Roco 23234
- Roco 23235
- Roco 23420
- Roco 23421
- Roco 23422
When using in digital operation, the specifications for the control of bell armature motors of the respective locomotive decoder manufacturer should be observed.
Döhler & Haass says, for example, the following:
What do I have to consider with bell armature motors?
All locomotive decoders from Doehler & Haass have supported the control of bell armature motors since delivery began.
How to proceed, please refer to the instructions for the conversion kits.
Replaces Roco motor 85027 & 85028. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads.
Scope of delivery:
- 1x motor 1020D
- 1x motor mount S030 Roco 85025 85027 85028 MU v1
- 1x A8 10-> 15 4.5 mm
- 1x A9 10-> 15 8 mm
- 2x brass thread inserts M1.6x2
- 2x strand
Replacement motor / conversion kit fit the following locomotives:
- Roco 2150
- Roco 2156
- Roco 23218
- Roco 23219
- Roco 23220
- Roco 23221
- Roco 23222
- Roco 23234
- Roco 23235
- Roco 23420
- Roco 23421
- Roco 23422
When using in digital operation, the specifications for the control of bell armature motors of the respective locomotive decoder manufacturer should be observed.
Döhler & Haass says, for example, the following:
What do I have to consider with bell armature motors?
All locomotive decoders from Doehler & Haass have supported the control of bell armature motors since delivery began.
How to proceed, please refer to the instructions for the conversion kits.
29.99 EUR*
Art.-no. MicromotorEU_NM015G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Minitrix DSB MY 1100, SNCB series 53, 54, 204, CFL 1600, MAV M61, NEG V170, NOHAB.
Replaces engine 31 2019 10 or 41 2019 10.
The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads.
scope of delivery
- 1x motor 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x A4 10-> 15 12.5 mm
- 1x A29 10-> 12 13 mm
- 1x worm W0.4-5-6
- 2x strand
Replacement motor / conversion kit fit the following locomotives:
- Minitrix 2019
- Minitrix 2020
- Minitrix 2021
- Minitrix 2023
- Minitrix 12219
- Minitrix 12267
- Minitrix 12269
- Minitrix 12270
- Minitrix 12718
- Minitrix 12719
- Minitrix 12721
- Minitrix 12722
- Minitrix 12739
- Minitrix 12745
- Minitrix 12750
- Minitrix 12799
When using in digital operation, the specifications for the control of bell armature motors of the respective locomotive decoder manufacturer should be observed.
Döhler & Haass says, for example, the following:
What do I have to consider with bell armature motors?
All locomotive decoders from Doehler & Haass have supported the control of bell armature motors since delivery began.
How to proceed, please refer to the instructions for the conversion kits.
Replaces engine 31 2019 10 or 41 2019 10.
The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads.
scope of delivery
- 1x motor 0816D
- 1x motor mount S012 Minitrix motor with rings MU v1
- 1x A4 10-> 15 12.5 mm
- 1x A29 10-> 12 13 mm
- 1x worm W0.4-5-6
- 2x strand
Replacement motor / conversion kit fit the following locomotives:
- Minitrix 2019
- Minitrix 2020
- Minitrix 2021
- Minitrix 2023
- Minitrix 12219
- Minitrix 12267
- Minitrix 12269
- Minitrix 12270
- Minitrix 12718
- Minitrix 12719
- Minitrix 12721
- Minitrix 12722
- Minitrix 12739
- Minitrix 12745
- Minitrix 12750
- Minitrix 12799
When using in digital operation, the specifications for the control of bell armature motors of the respective locomotive decoder manufacturer should be observed.
Döhler & Haass says, for example, the following:
What do I have to consider with bell armature motors?
All locomotive decoders from Doehler & Haass have supported the control of bell armature motors since delivery began.
How to proceed, please refer to the instructions for the conversion kits.
14.99 EUR*
Art.-no. DeAgostini_105
DeAgostini
Tool set 17 pieces consisting of:
- 1 x pocket with zipper
- 2 x large clamps
- 2 x clamps small
- 1 x measuring tape 300cm
- 1 x side cutter
- 2 x brushes
- 3 x files
- 1 x cutter knife
- 1 x screwdriver slot
- 1 x screwdriver cross
- 2 x tweezers
- 1 x pocket with zipper
- 2 x large clamps
- 2 x clamps small
- 1 x measuring tape 300cm
- 1 x side cutter
- 2 x brushes
- 3 x files
- 1 x cutter knife
- 1 x screwdriver slot
- 1 x screwdriver cross
- 2 x tweezers
9.99 EUR*
Art.-no. DeAgostini_058
DeAgostini
Ready-painted and printed plug-in kit consisting of:
- N gauge 9mm chassis completely assembled with NEM 356 couplings
- Printed boiler with ladders and attachments
The assembly can be done in a few simple steps, even by less experienced model railroaders.
- N gauge 9mm chassis completely assembled with NEM 356 couplings
- Printed boiler with ladders and attachments
The assembly can be done in a few simple steps, even by less experienced model railroaders.
9.99 EUR*
Art.-no. DeAgostini_032
DeAgostini
Ready-painted and printed plug-in kit consisting of:
- N gauge 9mm chassis completely assembled with NEM 356 couplings
- printing
- Removable wooden load with NEM standard dimensions
- Recordings for other containers according to NEM standard
The assembly can be done in a few simple steps, even by less experienced model railroaders.
- N gauge 9mm chassis completely assembled with NEM 356 couplings
- printing
- Removable wooden load with NEM standard dimensions
- Recordings for other containers according to NEM standard
The assembly can be done in a few simple steps, even by less experienced model railroaders.
0.99 EUR*
Art.-no. DeAgostini_061
DeAgostini
The rerailing device makes it easier to place the vehicles on the track. Very helpful, especially with steam locomotives and railcars.
0.99 EUR*
(20g, base price 4.95 EUR/100g)
Art.-no. DeAgostini_056
DeAgostini
For the foliage of bushes, trees and meadows
1.99 EUR*
(600cm², base price 33.17 EUR/m²)
Art.-no. DeAgostini_060
DeAgostini
1.99 EUR*
(720cm², base price 27.64 EUR/m²)
Art.-no. DeAgostini_051
DeAgostini
A sheet of sharply printed water optics with a structure 240x300mm
0.99 EUR*
(720cm², base price 13.75 EUR/m²)
Art.-no. DeAgostini_069
DeAgostini
A sheet of sharply printed natural stone look, 240x300mm
19.99 EUR*
Art.-no. DeAgostini_062
DeAgostini
Piko brand quality power supply unit with stepless speed controller, 700 mA output
4.99 EUR*
Art.-no. DeAgostini_068
DeAgostini
Finished model (including painting) made of polyresin plastic. The illustration shows the model unprocessed. The finished model can thus be placed directly on the system.
Yours sincerely
Daniel Mrugalski
DM-Toys