N-Scale 02/2021: Fleischmann, Wiking, Gabor, Faller

4.99 EUR^*

Art.-no. MU_N-i00061

Modellbahn Union

3-part ventilation set for industrial systems

Dimensions:
- 6 x 13 x 64 mm (2 pieces)
- 6 x 12 x 13 mm (1 piece)

9.99 EUR^*

Art.-no. MU_N-L00212

Modellbahn Union

Set with 5 different canopies, each one is delivered twice.

Dimensions:
- 16x9x10 (x2)
- 20x11x12 (x2)
- 40x16x21 (x2)
- 67x16x21 (x2)
- 128x16x21 (x2)

9.99 EUR^*

Art.-no. MU_N-L00213

Modellbahn Union

Set with 5 different canopies, each one is delivered twice.

Dimensions:
- 16x9x10 (x2)
- 20x11x12 (x2)
- 40x16x21 (x2)
- 67x16x21 (x2)
- 128x16x21 (x2)

9.99 EUR^*

Art.-no. MU_N-L00214

Modellbahn Union

Set with 5 different canopies, each one is delivered twice.

Dimensions:
- 16x9x10 (x2)
- 20x11x12 (x2)
- 40x16x21 (x2)
- 67x16x21 (x2)
- 128x16x21 (x2)

9.99 EUR^*

Art.-no. MU_N-L00215

Modellbahn Union

Set with 5 different canopies, each one is delivered twice.

Dimensions:
- 16x9x10 (x2)
- 20x11x12 (x2)
- 40x16x21 (x2)
- 67x16x21 (x2)
- 128x16x21 (x2)

159.90 EUR^*

Art.-no. Fleischmann_726019

Fleischmann

Diesel locomotive series 2016 of the Austrian Federal Railways.

Update!

¦ For the first time with Next18 interface and white / red light change
¦ Reprint with changed UIC company number
¦ Brake discs in contrasting colors

The locomotive type Siemens ER20 of the Eurorunner series is a diesel-electric locomotive built by Siemens Mobility (formerly Siemens Transportation Systems). These locomotives were initially built on behalf of the Austrian Federal Railways and named there as the 2016 series or "Hercules".

244.90 EUR^*

Art.-no. Fleischmann_726089

Fleischmann

Diesel locomotive series 2016 of the Austrian Federal Railways.

Update!

¦ For the first time with Next18 decoder, sound and white / red light change
¦ Reprint with changed UIC company number
¦ Brake discs in contrasting colors

The locomotive type Siemens ER20 of the Eurorunner series is a diesel-electric locomotive built by Siemens Mobility (formerly Siemens Transportation Systems). These locomotives were initially built on behalf of the Austrian Federal Railways and named there as the 2016 series or "Hercules".

189.99 EUR (RRP*)

149.99 EUR^*

Art.-no. Fleischmann_739283

Fleischmann

Electric locomotive 193 525 of the SBB Cargo International.

¦ Version with baptismal name "Rotterdam"
¦ With a new engine and revised gearbox
¦ Cross-border use in freight transport
¦ With a detailed roof design
¦ The headlight can be completely or partially switched off with a DIP switch
¦ In cooperation with Railcolor Design

In 2019, SBB Cargo International, in cooperation with SüdLeasing GmbH, ordered 20 Vectron locomotives from Siemens Mobility. The machines are equipped for use in Germany, Austria, Switzerland, Italy and the Netherlands (DACHINL).

To celebrate the opening of the office in the Netherlands, a machine was given a special design. The locomotive is called "Hollandpiercer" among railway enthusiasts.

289.90 EUR (RRP*)

219.99 EUR^*

Art.-no. Fleischmann_739353

Fleischmann

Electric locomotive 193 525 of the SBB Cargo International.

¦ Version with baptismal name "Rotterdam"
¦ With a new engine and revised gearbox
¦ Cross-border use in freight transport
¦ With a detailed roof design
¦ Model with digital decoder and digitally switchable sound and light functions
¦ Swiss light change and high beam switchable
¦ In cooperation with Railcolor Design
¦ Sound in cooperation with Leosoundlab

In 2019, SBB Cargo International, in cooperation with SüdLeasing GmbH, ordered 20 Vectron locomotives from Siemens Mobility. The machines are equipped for use in Germany, Austria, Switzerland, Italy and the Netherlands (DACHINL).

To celebrate the opening of the office in the Netherlands, a machine was given a special design. The locomotive is called "Hollandpiercer" among railway enthusiasts.

159.90 EUR^*

Art.-no. Fleischmann_781901

Fleischmann

Länderbahn GmbH class 223 diesel locomotive in "bodo" advertising design.

Update!

Elaborately printed model with the appearance of the "bodo" - this is a transport association that connects the offers of bus & train in the districts of Bodenseekreis, Ravensburg and Lindau.

¦ For the first time with Next18 interface and white / red light change
¦ Color-contrasting brake discs
¦ Suitable trolleys: Item no. 881901

The Länderbahn is a private railway company that offers transport services in local passenger transport in Germany and the Czech Republic, among others with the product brand "alex". The Länderbahn has been part of NETINERA Deutschland GmbH since 2011.

244.90 EUR^*

Art.-no. Fleischmann_781971

Fleischmann

Länderbahn GmbH class 223 diesel locomotive in "bodo" advertising design.

Update!

Elaborately printed model in the appearance of the "bodo" - this is a transport association that connects the offers of bus & train in the districts of Bodenseekreis, Ravensburg and Lindau.

¦ For the first time with Next18 decoder, sound and white / red light change
¦ Brake discs in contrasting colors
¦ Suitable trolleys: Item no. 881901

The Länderbahn is a private railway company that offers transport services in local passenger transport in Germany and the Czech Republic, among others with the product brand "alex". The Länderbahn has been part of NETINERA Deutschland GmbH since 2011.

194.90 EUR (RRP*)

159.99 EUR^*

Art.-no. Fleischmann_739318

Fleischmann

Electric locomotive 193 627 of the Raillogix.

- Metallic paint
- With a long rain gutter
- Use in international freight transport
- The headlights can be switched off completely or partially with a DIP switch
- In cooperation with Railcolor Design

The first Vectron multisystem locomotive from Raillogix is particularly striking due to its red metallic paint. The company is one of the major intermodal rail operators in Europe. It serves not only the largest ports in Europe, but also the most important industrial regions in the European hinterland.

279.99 EUR (RRP*)

219.99 EUR^*

Art.-no. Fleischmann_739398

Fleischmann

Electric locomotive 193 627 of the Raillogix.

- Metallic paint
- With a long rain gutter
- Use in international freight transport
- In digital mode with switchable high beam and individually switchable headlights or tail lights
- In cooperation with Railcolor Design
- Sound in cooperation with Leosoundlab

The first Vectron multisystem locomotive from Raillogix is particularly striking due to its red metallic paint. The company is one of the major intermodal rail operators in Europe. It serves not only the largest ports in Europe, but also the most important industrial regions in the European hinterland.

159.90 EUR (RRP*)

99.99 EUR^*

Art.-no. Fleischmann_881911

Fleischmann

Car set consisting of three compartment cars, 1st class, type Avmz 111, for the "Christoforus-Express" motorail train of the Deutsche Bundesbahn.

¦ Version with red aprons and gray roof

From 1969, the Deutsche Bundesbahn set up the D 1410/1411 as a fast daily connection between Düsseldorf/Cologne and Munich. For the first time, the DB tried to attract normal and business travel to rail all year round with particularly favorable tariffs compared to tourist traffic. The travel time was almost seven hours. In order to be able to drive the train at up to 160 km/h, 20 cars of the DDm 915 type were equipped with magnetic track brakes. From 1971, the electric locomotive series 103 was usually used for the covering, but other series were also used, e.g. B. BR 111, used as a traction vehicle. The "Christoforus-Express" initially ran six times a week, from the summer of 1970 daily. The D 1484/1485 “Auto-Traum-Express” from Hamburg-Altona to Munich East, which was introduced as a night connection, expanded the offer. These trains became the mainstay of motorail travel in the 1970s.

113.90 EUR (RRP*)

79.99 EUR^*

Art.-no. Fleischmann_849102

Fleischmann

Car set with three "VTG" pressurized gas tank cars, type Zags, used on the Deutsche Bundesbahn.

New construction 2020!

¦ Version with long sun roof
¦ Suitable for block trains

Pressurized gas tank wagons are special wagons for liquefied, deep-frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The eye-catching, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

For a long time these wagons drove exclusively as private wagons [P] that were registered with the national railway administrations. In contrast to other types of wagons, they are now owned by specialized wagon rental companies. The complex management includes the maintenance, inspection, etc., of the vehicle fleet.

34.90 EUR^*

Art.-no. Fleischmann_849103

Fleischmann

Pressurized gas tank car, type Zags, of the Deutsche Reichsbahn.

New construction 2020!

¦ Version with short sun roof

Pressurized gas tank wagons are special wagons for liquefied, deep-frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The eye-catching, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

For a long time these wagons drove exclusively as private wagons [P] that were registered with the national railway administrations. In contrast to other types of wagons, they are now owned by specialized wagon rental companies. The complex management includes the maintenance, inspection, etc., of the vehicle fleet.

34.90 EUR^*

Art.-no. Fleischmann_849105

Fleischmann

"WASCOSA" pressurized gas tank car, type Zags, used on the Swiss Federal Railways.

New construction 2020!

¦ Version with short sun roof
¦ Finely detailed design with authentic "Wascosa" lettering

Pressurized gas tank wagons are special wagons for liquefied, deep-frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The eye-catching, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

For a long time these wagons drove exclusively as private wagons [P] that were registered with the national railway administrations. In contrast to other types of wagons, they are now owned by specialized wagon rental companies. The complex management includes the maintenance, inspection, etc., of the vehicle fleet.

42.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_849106

Fleischmann

"KOSAN" pressurized gas tank car, type Zags, used on the Danish State Railways.

¦ Finely detailed design without sun protection roof with authentic lettering

Pressurized gas tank wagons are special wagons for liquefied, deep-frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The eye-catching, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

For a long time these wagons drove exclusively as private wagons [P] that were registered with the national railway administrations. In contrast to other types of wagons, they are now owned by specialized wagon rental companies. The complex management includes the maintenance, inspection, etc., of the vehicle fleet.

42.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_849107

Fleischmann

Pressurized gas tank wagons, type Zags, of the Spanish State Railways.

¦ Version with long sun roof
¦ Finely detailed design with authentic "Transfesa" lettering

Pressurized gas tank wagons are special wagons for liquefied, deep-frozen liquefied or dissolved gases. Loading and unloading takes place using devices that can be operated from the ground (bottom emptying). The eye-catching, approx. 30 cm high, orange vertical stripe in the middle of the boiler is typical of European cars.

For a long time these wagons drove exclusively as private wagons [P] that were registered with the national railway administrations. In contrast to other types of wagons, they are now owned by specialized wagon rental companies. The complex management includes the maintenance, inspection, etc., of the vehicle fleet.

269.10 EUR^*

Art.-no. Minitrix_16142

Minitrix

Prototype: Deutsche Bahn AG (DB AG) standard electric locomotive 141 083-6. Traffic red basic paint scheme. Version with double lamps, ventilation grille of the Klatte type. 2003 to 2006. 141 083-6 is not operational today in the Bavarian Railway Museum in Nördlingen. Use: Light goods and passenger trains for local and long-distance traffic.

Highlights: digital sound with many functions.

Model: New construction. Housing and support made of die-cast zinc. Built-in digital decoder and sound generator for operation with DCC and Selectrix. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white LEDs, driver's cab lighting, can be controlled digitally. Attached handle bars. There are decals to show the farewell trip in 2006. Length over the buffers 98 mm.

9.99 EUR^*

Art.-no. Faller_232532

Faller

This kit contains: 40 items in 5 colors and 1 construction manual. Use for crafting FALLER - plastic glue.

Dimensions: 78 x 42 x 66 mm

9.99 EUR^*

Art.-no. Faller_232545

Faller

This kit contains: 32 items in 4 colors, window parts, 1 decoration and 1 construction manual.

For DIY, use FALLER EXPERT plastic glue.

Dimensions: 95 x 57 x 47 mm

5.22 EUR^*

Art.-no. Faller_170726

Faller

For the realistic design of meadows and wild green areas. Particularly well suited for electrostatic grassing with our "Gras-Fix" (Art. 180691).

Fiber height: 2 mm

36.96 EUR^*

Art.-no. DH_DH10C-0

Doehler & Haass

The latest version with the latest software is always supplied!

The software, firmware and sound data download can be obtained from the Doehler & Haass website .

Product features and functions
- For optional operation with conventional DC driving device, digital systems according to SelecTRIX 1 and 2 or according to NMRA standard (DCC)
-The switchover between analog and digital operation takes place automatically
-In digital mode, the last programmed system is used (it is not switched automatically!)
-SelecTRIX 1 31 speed steps, 100 addresses
-SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
-DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- The latest generation of load control, resulting in particularly smooth control behavior
-Various control variants for optimal adaptation to the engine
-Internal 127 speed steps
-Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
-Block section operation with simple diodes in digital operation
-Light and function outputs can be dimmed and activated analogously
- Shunting
-Motor, light and track connections can be exchanged electronically
-All function outputs are freely programmable
-Temperature protection
-Reset function for DCC and SX2
-Update capability of the decoder
-The update (the firmware download from the Internet is free) is possible with the decoder installed on the track (no opening of the vehicle necessary) and is carried out either via the FCC digital center or the programmer. If no corresponding hardware is available, Doehler & Haass will provide a programmer on loan on request.

The DH10C vehicle decoder supports braking with asymmetrical digital voltage (four diodes in series and one anti-parallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

A connected SUSI sound module must be removed for SX1 programming. It is sufficient to interrupt the supply voltage (red wire) for the time of the SX1 programming. The SX2 or DCC programming is not affected by this.

Technical data (2nd generation) DH10C
Dimensions [mm] 12.7 x 8.9 x 1.4
Total load 1.5 A
Maximum motor current 1.5 A.
Maximum driving voltage 30 V.
Function outputs light: LV, LR (dimmable) 150 mA each
Function outputs: AUX1, AUX2 (dimmable) 300 mA each
Function outputs: AUX3, AUX4 1.0 A each
Function outputs: AUX5, AUX6 With SUSI interface (if AUX5 / AUX6 deactivated) unamplified *)

Connection variants:
-DH10C-0 Without connecting wires
-DH10C-1 With ribbon cable for standard socket NEM651
-DH10C-2 With connection cable for standard socket NEM651
-DH10C-3 With pigtail
-DH10C-4 6-pin plug connector for direct plugging (NEM651)

19.99 EUR^*

Art.-no. Gabor_12130702

Gabor

The EMW 340 passenger car was manufactured at Eisenacher Motorenwerke from 1949 to 1955.

Ready-made model made of plastic, with window insert.

10.99 EUR^*

Art.-no. Wiking_095004

Wiking

Container 1x 40 ', 2x 20'

Versatile logistics boxes with major shipping companies

Sealand, Hamburg Süd and Maersk - it is big names and even better-known designs that have brought the shipping companies' containers into the world. WIKING is creating new, authentic reinforcement for the popular container theme. Because many collectors remember the brand chronology well, which at the end of the 1960s had taken on a completely new logistics topic: The first container trains with 20ft and 40ft containers twice as large were miniaturized by WIKING and loaded onto a variety of semi-trailers. The accessory set includes two 20ft containers and a typical 40ft container.

12.49 EUR^*

Art.-no. Wiking_097402

Wiking

WIKING history can be so multifaceted: This is the only way to get to the heart of how WIKING is now turning a wheel loader classic in 1:87 into a classic for N-scale. The Hanomag wheel loader B11 is miniaturized to scale and even retains the mobility of the front lifter with shovel. The Hanomag B11 is considered the big brother of the B8 and once had a powerful 6-cylinder engine that generated 110 hp. At least 2,423 wheel loaders of this ten-ton type were delivered. The “big” 1:87 models have always been the inspiration for successful WIKING miniatures in the N gauge. That should stay that way with the construction machine classic in the 160-fold miniaturization!

Year of manufacture original manufacturer: 1964-72

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51198

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - cool white
Color temperature - 6000K
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51199

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - light blue
Color temperature - approx. 10000K
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51200

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - dark blue
Color temperature - approx. 15000K
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51201

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - red
Color temperature - about 1000K
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51202

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - green
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51203

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - yellow
Color temperature - approx. 3500K
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection

10.99 EUR^*

Art.-no. Schoenwitz_MbS-51204

Schönwitz

High quality adapter with LED light source in the luminous color cool white for fiber optic cables.

Made of aluminum, with a powerful 3W LED inside, these adapters are suitable for our fiber optic cables.

Due to the 3mm opening and the practical screw connection, it is possible to fix different diameters of optical fibers. The best result is achieved with a 3mm fiber optic cable. However, you can also use smaller diameters that are bundled, for example, with a piece of shrink tubing and then fixed. This means that one large as well as many small luminous dots can be created - the possible uses are diverse and there are hardly any limits to creativity. Well-known problems with the lighting of optical fibers and lost luminosity are history!

The connection cables, positive pole red and negative pole black, are firmly cast with the housing and are extended by a 2-pole plug.

Properties:

Material - aluminum
Dimensions - housing 13.5mm x 32mm with 3mm opening
Cable length - 43.5cm including extension
Cable cross-section - 0.32mm²
Outside diameter - 2.4mm
Light source - LED
Luminous color - purple violet
Power - 3 watts
Voltage - maximum 12V DC
Current - 100 - 120mA
Working range temperature - -20 ° C - + 60 ° C

Scope of delivery - 1 piece LED adapter with 3W light source + connection cables with plug connection