Dear customer,
All items you can see in our online shop are in stock and can be delivered immediately. We deliver via DHL & UPS without delays.
2.99 EUR*
Art.-no. MU_N-C00000
Modellbahn Union
Execution:
- without painting - Removable cover, not mounted Dimensions: 76x 15x 16 mm, pin spacing according to NEM 380 75x14mm |
6.99 EUR*
(60ml, base price 11.65 EUR/100ml)
Art.-no. MU_N-A10000
Modellbahn Union
For a long time we searched in our own production the perfect adhesive for several applications. Now, in close collaboration with MigJimenez, we have developed our own universal adhesive, which we offer as a model railroad Union product "Ultra Glue Acrylic".
The advantages of the high-strength, transparent acrylic adhesive at a glance: - Universal: adheres durable cardboard (laser cut), plastic, resin, etch and transparent parts without leaving any residue - Gluing different materials together possible - very fast adhesion without immediate fixation of the parts - complete transparent drying within 6 hours - After drying the adhesive this still retains enough flexibility - Odorless! Working in small rooms possible. There are no odors and harmful vapors Application Tips: - When gluing lasercut kits whose parts are to dry quickly, we recommend the additional use of the Rocket Card Glue (AD57) from Deluxe Materials. - The model railway Union Kleber can be applied with a brush. Dilution and cleaning is possible with water. - Especially suitable for large surfaces. A fine readjustment is also possible without problems when gluing. Other adhesives dry very quickly and an adjustment is therefore no longer possible. Lasercut Glue, Lasercut Glue, Plastic Glue, Plastic Glue, Plastic Glue, Plastic Glue, Resin Glue, Resin Glue, Glue |
19.99 EUR*
Art.-no. MU_N-A00634
Modellbahn Union
Very filigree lamps with realistic, warm white, LED.
Power is supplied via 2 enameled copper wires. With the included diodes and resistors, the lamps can be connected to a normal railway transformer (3-16 volts). After installing the lamps, the resistor and diode is simply soldered to the enameled copper wire and then connected to the power source. |
49.99 EUR*
Art.-no. MU_N-G99404
Modellbahn Union
The rail cleaning trolley is an unpainted kit, but with all the necessary parts (weight, kinematics, wheel sets, screws, nuts).
The carriage forms the ideal basis for maintaining the track system. Due to the close coupling link with NEM 355 holder, any couplings according to NEM 357 can be used and the wagon can run in the train. The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and colors (e.g. with Revell Email or Revell Aqua Color). |
49.99 EUR*
Art.-no. MU_N-G99405
Modellbahn Union
The rail cleaning trolley is an unpainted kit, but with all the necessary parts (weight, kinematics, wheel sets, screws, nuts, cleaning felt).
The carriage forms the ideal basis for maintaining the track system. The felt grinder gently removes dirt from the tracks. Heavily soiled grinders can easily be replaced with self-adhesive felt (1mm). Due to the close coupling link with NEM 355 holder, any couplings according to NEM 357 can be used and the wagon can run in the train. The highly detailed, unpainted model was produced using the 3D printing process and can be processed and painted with standard tools and colors (e.g. with Revell Email or Revell Aqua Color). |
24.99 EUR*
Art.-no. RAILNSCALE_N2328
RAILNSCALE
About the original: The Ural-4320 is a general purpose 6×6 off-road vehicle. The production started in 1977. This truck is designed for the Soviet army but also in use in many other countries. In the proverbial Russian tradition, the Ural-4320 is reliable and easy to repair and maintain.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips. All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner. |
17.99 EUR*
Art.-no. RAILNSCALE_N2357
RAILNSCALE
The container chassis has mounting points that are arranged in such way that 20 feet, 30 feet, and 40 feet containers can be mounteded to it. The pick-up points are in accordance with NEM-380.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips. All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner. |
29.99 EUR*
Art.-no. RAILNSCALE_N2857
RAILNSCALE
The set contains a Volvo F10 4x2 semi-trailer and a container chassis. The container chassis has mounting points that are arranged in such way that 20 feet, 30 feet, and 40 feet containers can be mounteded to it. The pick-up points are in accordance with NEM-380.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips. All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner. |
179.99 EUR*
Art.-no. Minitrix_16234
Minitrix
Prototype: German State Railroad (DR) diesel locomotive, road number 132 372-4, C-C wheel arrangement, built starting in 1974 in the Soviet Union for the German State Railroad, nicknamed "Ludmilla". Use: Heavy passenger and freight trains.
Highlights: Affordable model with sound from the new Hobby Program. Model: The locomotive has a built-in digital decoder and sound generator for DCC and Selectrix operation. It also has a motor with a flywheel. 4 axles powered. Traction tires. The triple headlights change over with the direction of travel. Length over the buffers 126 mm / 4-15/16". |
206.10 EUR*
Art.-no. Minitrix_15536
Minitrix
Prototype: 5 German Federal Railroad (DB) type Fcs 090 and Fcs 092 hopper cars. Use: For goods that are not sensitive to moisture.
Highlights: - Design differences - Load of coal Model: The cars have different car numbers and different designs, with kinematics for close coupling, and with a load of coal. Total length over the buffers 300 mm. With laser cut kit for coal storage "Eckartshausen". |
299.99 EUR*
Art.-no. Minitrix_11147
Minitrix
Prototype: MRCE class 185.1 electric locomotive, a DB AG type Res flat car, and a ermewa type Rils sliding tarpaulin car. Operating condition around 2012.
Highlights: - The locomotive is equipped with a DCC decoder - sound Model: The locomotive's chassis is made of die-cast metal. DCC decoder with sound generator. 5-pole motor with 2 flywheels. With kinematics for close coupling. The headlights change over with the direction of travel, 4 axles powered, traction tires. Carriage with kinematics for close coupling. With mobile station, track connection box, switching power supply 230 V / 36 VA, track oval with curved tracks in radius 2. Required area: 110 x 50 cm. Total length over the buffers of the train approx. 366 mm. Expandable with the entire Minitrix track program. |
50.83 EUR*
Art.-no. Brawa_65067
Brawa
Company number: 50 50 28-13 176-9
- Printed window frames - Exact replica of the "Görlitz V" bogies - Multi-colored lacquered interior - Close coupling kinematics - Precisely fitted windows - Car transition with separately attached rubber bead - optional interior lighting 2211 |
50.83 EUR*
Art.-no. Brawa_65068
Brawa
Company number: 50 50 28-13 288-2
- Printed window frames - Exact replica of the "Görlitz V" bogies - Multi-colored lacquered interior - Close coupling kinematics - Precisely fitted windows - Car transition with separately attached rubber bead - optional interior lighting 2211 |
50.83 EUR*
Art.-no. Brawa_65069
Brawa
Company number: 50 50 28-13 676-8
- Printed window frames - Exact replica of the "Görlitz V" bogies - Multi-colored lacquered interior - Close coupling kinematics - Precisely fitted windows - Car transition with separately attached rubber bead - optional interior lighting 2211 |
50.83 EUR*
Art.-no. Brawa_65070
Brawa
Company number: 51 50 88-15 024-5
- Printed window frames - Exact replica of the "Görlitz V" bogies - Multi-colored lacquered interior - Close coupling kinematics - Precisely fitted windows - Car transition with separately attached rubber bead - optional interior lighting 2211 |
27.49 EUR*
(1.35m², base price 20.36 EUR/m²)
Art.-no. Faller_180504
Faller
The ideal landscape photo for the system! This model background consists of three parts. Easy to use and printed on appropriately robust material.
Dimensions: 2700 x 500 mm |
29.99 EUR*
(1.35m², base price 22.21 EUR/m²)
Art.-no. Faller_180505
Faller
The ideal landscape photo for the system! This model background consists of three parts. Easy to use and printed on appropriately robust material.
Dimensions: 2700 x 500 mm |
29.99 EUR*
(1.35m², base price 22.21 EUR/m²)
Art.-no. Faller_180509
Faller
This model background shows a section of a small town and consists of 3 parts.
Dimensions: 2700 x 500 mm |
29.99 EUR*
(1.35m², base price 22.21 EUR/m²)
Art.-no. Faller_180510
Faller
This model background of an industrial backdrop consists of 3 parts.
Dimensions: 2700 x 500 mm |
29.99 EUR*
(3.104m², base price 9.66 EUR/m²)
Art.-no. Faller_180512
Faller
2-part background, made from an original photo. The motif shows the landscape around the »Neuschwanstein« castle.
Dimensions: 3200 x 970 mm |
29.99 EUR*
(3.104m², base price 9.66 EUR/m²)
Art.-no. Faller_180513
Faller
2-part model background. The original shows a section of the landscape in the area of the Karwendel Mountains. Combinations are possible by unlimited extension to the right and left.
Dimensions: 3200 x 970 mm |
45.99 EUR*
(2.522m², base price 18.24 EUR/m²)
Art.-no. Faller_180514
Faller
This background, which was made from an original photo, consists of 4 parts of 970 mm each. By cutting off the landscape print you get a pure cloud background.
This background can be extended in combination with Art. 180511. Also alternately several times. Dimensions: 3880 x 650 mm |
29.99 EUR*
(1.305m², base price 22.98 EUR/m²)
Art.-no. Faller_180515
Faller
It consists of 3 parts. The landscape reproduced from an original photo shows the recreational area of the Löwenstein Mountains with the town of Löwenstein in focus.
Dimensions: 2900 x 450 mm |
29.99 EUR*
(1.35m², base price 22.21 EUR/m²)
Art.-no. Faller_180518
Faller
This model background shows a section in Saarland and consists of 3 parts.
Dimensions: 2700 x 500 mm |
23.74 EUR*
(1.35m², base price 17.59 EUR/m²)
Art.-no. Faller_180800
Faller
The ideal landscape photo for the system! This model background consists of three parts. Easy to use and printed on appropriately robust material.
Dimensions: 2700 x 500 mm |
1.61 EUR*
Art.-no. Faller_180667
Faller
Evolved! An improved light color and light yield as well as a larger beam angle ensure particularly homogeneous illumination of building models. In FALLER kits, the optimized base fits exactly into the brackets provided. 12-16 V, AC / DC.
Current consumption: max. 15 mA |
11.39 EUR*
Art.-no. Faller_170688
Faller
For burr-free cutting of the finest molded parts. Only suitable for polystyrene and copper wire.
|
4.17 EUR*
Art.-no. Faller_180717
Faller
Eye catcher! Light-emitting diodes with integrated microcircuit, can be used anywhere where a flashing light is required, e.g. B. as an optical signal for vehicle models (police, rescue, fire brigade, construction, municipal or agriculture), for gate movements, for the lighting of fairground models and much more
Supply voltage: 3-4 V DC Current consumption: max. 20 mA Flashing frequency: approx. 1.5 Hz International size: 0805 Length: 2mm Width: 1.25 mm Height: 1.1 mm Note: Use the flashing electronics, item 163760-163765, for lighting Car System vehicles. |
69.99 EUR*
Art.-no. ESU_51840
ESU
The SignalPilot is a multi-protocol accessory decoder that is intended to switch signals. Thanks to its intelligent software, it can be used with DCC or Motorola®. The flexible programming makes this decoder an all-rounder among our accessory decoders. The SignalPilot has 16 outputs to which the individual micro lamps or LEDs of light signals can be connected directly. Because the outputs are designed as push / pull output stages, both conventional light signals with a common anode and light signals or light strips with a common ground connection (common cathode), as can occur with Viessmann® signals, are suitable. But also motorized form signals and point machines can be operated directly with the SignalPilot.
Operating modes The SignalPilot can be used under DCC with RailComPlus® and Motorola®. Any address or combination of addresses can be assigned to each output by the software. functionality The SignalPilot can be supplied either directly from the digital center or separately from a DC or AC voltage transformer. You can connect the LEDs of two, three or four-aspect light signals directly to the 16 outputs. You can operate each output individually as a continuous light, flashing light or pulsed light. The brightness or flashing frequency can be set as well as the fade-in and fade-out times. Various prototypical light effects such as soft dimming, neon tube effects, defective neon tubes, gas lantern simulation, or flickering light ensure a realistic result. Random switching on or off or an on and off delay can also be activated. A night service can switch the outputs darker together if required. The outputs of the SignalPilot are combined into signal images during configuration. In principle, two-, three-, four- or more-aspect signals are conceivable here. Depending on the number of outputs involved, one or more turnout numbers (turnout addresses) are assigned to each signal, with the help of which you can later switch the individual signal aspects. Up to 16 turnout numbers are available for this. The configuration of the signal aspects is done exclusively with the help of the ESU LokProgrammer software. You select the desired signal aspects, then transfer them to the decoder and finally wire the signals as configured. All signal images predefined in the LokProgrammer software can be changed individually. The description of the signal images themselves takes place with the help of XML files, which are either regularly extended by ESU or you can create and extend them completely at your own discretion. In this way "exotic" signals can also be supported. The SignalPilot is multi-protocol capable and can be used both with central units according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-capable central units. The configuration can take place on the main track as well as on the programming track. Thanks to RailCom®, CVs can also be read out. Optionally, a SwitchPilot Extension relay module can be docked to the SignalPilot. With its help, braking sections can be activated or frogs polarized, for example. LokProgrammer With the ESU LokProgrammer you can easily configure the SignalPilot directly on the screen: Simply select the desired signal type and display the connection directly on the screen. Built-in future The operating software of the SignalPilot can be updated at any time with the help of the LokProgrammer. This may be necessary if we add other types of signals. |
14.24 EUR*
Art.-no. Noch_36059
Noch
Indispensable in the forest
The model railway figures "Jäger and Forester" in gauge N give a model landscape even more detailed scenes. They sit high up on the hunter's stand and have a view of the forest. The hunter has positioned himself close between the model trees in the mixed forest and keeps a close eye on what is happening. For forest animals such as deer, roe deer, wild boar and birds, caution is required here, but the hunter is still indispensable in a realistic forest. The forester should not be missing in any forest - he ensures a well-tended forest and takes care of the trees. |
14.24 EUR*
Art.-no. Noch_36112
Noch
A new road is being built here
The model building figures N "road workers" should not be missing on a landscape in which great scenes of working people are recreated. The "road workers" have to work hard every day when they have to renew the hot pavement. A real challenge, especially on hot summer days. The "road workers" ensure a perfect road surface on every model diorama and should not be missing among the workers. |
11.39 EUR*
Art.-no. Noch_36559
Noch
A situation that almost everyone has experienced with the joys
Many people know this situation when you are out with friends, having fun and drinking a glass or two of alcohol on the side. Often you don't even notice how much has already been consumed and you're stumbling through the streets drunk. A scene that occurs in real life and should therefore not be missing on any diorama. Recreate realistic scenes with the NOCH miniature figures N "Drunk" - whether in the city, in the country or at the lake, where young people are out and about with their friends and partying late into the night. |
13.29 EUR*
Art.-no. Noch_36817
Noch
Toooor… Toooor… & the winner is…?
The N miniature figures from NOCH "Children on the football field" are ideal for recreating great scenes on a model landscape. The children meet on the sports field to play football and have fun. In football, the round ball is shot forcefully into the large angular goal. It's a head-to-head race: everyone wants to be the winner, but who will win the match? That is the question here - create this moving scene and liven up your diorama. |
14.24 EUR*
Art.-no. Noch_36821
Noch
Outside in the cold snow
In the figure set "Children in the Snow" there are model figures in the gauge N. The figures contained in the set are perfect for beautiful winter scenes with lots of snow. They perfectly reproduce the playing and romping in the ice-cold snow on your diorama. Not only are the two snowmen with their long noses a real eye-catcher on your facility, but also the children who are having a fun snowball fight. The winter figures are ideal for creating winter scenes. |
15.19 EUR*
Art.-no. Noch_36897
Noch
The perfect means of transportation for long bike rides
The figures from NOCH in the N gauge "racing cyclists" fit perfectly into an already beautifully designed model landscape with lots of nature, in which cyclists like to spend their free time. In addition to mountain bikers or a family on a relaxed bike excursion, "racing cyclists" should not be missing! With their high speed they drive further distances in summer, are a real eye-catcher in every NOCH model landscape and bring the diorama to life. Fun and sweat guaranteed! |
30.00 EUR
(RRP*)
19.99 EUR*
Art.-no. FKS_160-160-01
FKS
Kit for a Magirus Deutz truck that was built with a cubic D-cab from the end of the 1960s (also known as D-front control).
The kit contains all the 3D printed parts that have to be partially re-cleaned, colored and assembled. The kit also includes etched rearview mirrors, an etched radiator grille and an etched rear bumper. The glazing of the driver's cab is part of the kit in the form of a deep-drawn part. The decorative objects shown (houses, figures, other objects) are not included in the scope of delivery! |
30.00 EUR
(RRP*)
19.99 EUR*
Art.-no. FKS_160-160-02
FKS
Kit for a Magirus Deutz truck that was built with a cubic D-cab from the end of the 1960s (also known as D-front control).
The kit contains all the 3D printed parts that have to be partially re-cleaned, colored and assembled. The kit also includes etched rearview mirrors, an etched radiator grille and an etched rear bumper. The glazing of the driver's cab is part of the kit in the form of a deep-drawn part. The decorative objects shown (houses, figures, other objects) are not included in the scope of delivery! |
40.00 EUR
(RRP*)
24.99 EUR*
Art.-no. FKS_160-160-03
FKS
Kit for a Magirus Deutz truck tipper (with loading crane folded in) which was built with a cubic D-cab from the end of the 1960s (also known as D-front control).
The kit contains all the 3D printed parts that have to be partially re-cleaned, colored and assembled. The kit also includes etched rearview mirrors, an etched radiator grille and an etched rear bumper. The glazing of the driver's cab is part of the kit in the form of a deep-drawn part. The decorative objects shown (houses, figures, other objects) are not included in the scope of delivery! |
40.00 EUR
(RRP*)
24.99 EUR*
Art.-no. FKS_160-160-04
FKS
Kit for a Magirus Deutz truck tipper (extended with loading crane) which was built with a cubic D-cab from the end of the 1960s (also known as D-front control).
The kit contains all the 3D printed parts that have to be partially re-cleaned, colored and assembled. The kit also includes etched rearview mirrors, an etched radiator grille and an etched rear bumper. The glazing of the driver's cab is part of the kit in the form of a deep-drawn part. The decorative objects shown (houses, figures, other objects) are not included in the scope of delivery! |
12.00 EUR*
Art.-no. FKS_160-165-01
FKS
A loading crane is used as a loading device on a utility vehicle (truck) to load and unload goods.
They are mostly driven hydraulically. Control is often carried out using levers on the side. The kit is designed so that the loading arm is shown extended, has a loading hook and can be swiveled to the side. Further functions of the hydraulic system cannot be displayed. The kit consists of resin 3D printing. The individual parts of the kit have to be cleaned, assembled and painted accordingly. Using this kit on other vehicles of the 1: 160 scale may require some adjustments to the respective chassis of the corresponding truck. |
12.00 EUR*
Art.-no. FKS_160-165-02
FKS
A loading crane is used as a loading device on a utility vehicle (truck) to load and unload goods.
They are mostly driven hydraulically. Control is often carried out using levers on the side. The kit is designed so that the loading arm is shown extended, has a loading hook and can be swiveled to the side. Further functions of the hydraulic system cannot be displayed. The kit consists of resin 3D printing. The individual parts of the kit have to be cleaned, assembled and painted accordingly. Using this kit on other vehicles of the 1: 160 scale may require some adjustments to the respective chassis of the corresponding truck. |
12.00 EUR*
Art.-no. FKS_160-165-03
FKS
Clamshell grabs are attachments for, among other things, loading cranes on trucks.
With the clamshell grab, two spoons sliding against each other pick up the load from above. In civil engineering, the clamshell grab is used to dig trenches and construction pits. The kit includes 3 different clamshell grabs that can be used both as cargo and as an attachment for the - Magirus type 4 tipper truck or. - Type 1 loading crane can be used. The kit consists of resin 3D printing. The individual parts of the kit must be cleaned, assembled and painted accordingly. |
8.00 EUR*
Art.-no. FKS_160-165-04
FKS
Scrap grabs are attachments for loading cranes on trucks.
Scrap grabs are used as a lifting device for moving scrap, stones or other loose goods (e.g. also waste). The kit contains 2 different scrap grabs (orange peel grabs) that can be used both as cargo and as an attachment for the - Magirus type 4 tipper truck or. - Type 1 loading crane can be used. The kit consists of resin 3D printing. The individual parts of the kit must be cleaned, assembled and painted accordingly. |
8.00 EUR*
Art.-no. FKS_160-165-05
FKS
Wood grabs (wood tongs) are attachments, for example, for loading cranes on trucks or trailers.
The kit includes 2 different wood grippers (wood tongs) that are used both as cargo and as an attachment for the - Magirus type 4 tipper truck or. - Type 1 loading crane can be used. The kit consists of resin 3D printing. The individual parts of the kit must be cleaned, assembled and painted accordingly. |
6.00 EUR*
Art.-no. FKS_160-165-06
FKS
Pallet forks include attachments for loading cranes on trucks.
They are used to transport goods that are loaded onto pallets or are transported on them. The kit includes 1 pallet fork that can be used both as a load and as an attachment for the - Magirus type 4 tipper truck or. - Type 1 loading crane can be used. The kit also includes 3 Euro pallets. The kit consists of resin 3D printing. The individual parts of the kit must be cleaned, assembled and painted accordingly. |
2.60 EUR*
Art.-no. Springer_3330-100
Springer
The absolute blast - the 10/0 brush! Everything is possible with this extremely fine brush. The high-quality red sable Kolinsky hair and the fine, stable Tory synthetic fiber are ideal for painting even the smallest N gauge things.
Only a good brush realizes the imagination! Fine synthetic hair red gold, pointed, seamless silver ferrules, ergonomically shaped triangular handles painted cherry red with gold tip. Top class brushes! Manufactured in Germany by trained employees. The triangular handle does not roll away in the hand and enables fatigue-free work. |
29.99 EUR*
Art.-no. MicromotorEU_NA001
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Arnold - Lima Thalys / TGV
The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S014V01 - 1x shaft adapter A10 10-> 15 7 mm Replacement motor / conversion kit suitable for the following locomotives: - Arnold 4321 -Lima 163923 |
29.99 EUR*
Art.-no. MicromotorEU_NA002
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Arnold Kittel steam railcars
Replaces engine 2923-020. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 2x motor mounts S003V01 - 2x shaft adapter A19 10-> 12 7 mm - 2x strand 40mm Replacement motor / conversion kit suitable for the following locomotives: - Arnold 2923 - Arnold 2924 - Arnold 2925 |
29.99 EUR*
Art.-no. MicromotorEU_NA003
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Arnold NS Motorpost
Replaces engine 2335-020. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S035 - 2x shaft adapter A19 10-> 12 7 mm - 2x strand 40mm Replacement motor / conversion kit suitable for the following locomotives: - Arnold 0245 - Arnold 2335 - Arnold 2336 - Arnold 2337 |
29.99 EUR*
Art.-no. MicromotorEU_NA004G
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Arnold NS 1300, SNCF CC 7100, E03 / BR103 DB
Replaces engine 0236-009. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. Scope of delivery: - 1x motor 1020D - 1x motor mount S004V01 - 2x shaft adapter A6 10-> 15 22 mm - 2x worm W0.4-5-6 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following locomotives: - Arnold 0236 - Arnold 0237 - Arnold 0238 - Arnold 2332 - Arnold 2338 - Arnold 2342 - Arnold 2350 - Arnold 2351 - Arnold 2353 |
29.99 EUR*
Art.-no. MicromotorEU_NA005G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Arnold E10 E40
Replaces engine 2023-020. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 1020D - 1x motor mount S004V01 - 2x shaft adapter A7 10-> 15 15 mm - 2x worm W0.4-5-6 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following locomotives: - Arnold 0232 - Arnold 0233 - Arnold 0234 |
59.99 EUR*
Art.-no. MicromotorEU_NB001
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with the Brawa Contrainer crane
The crane is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 3x motor 0816S - 3x shaft adapter A9 10-> 15 8 mm - 3x shaft adapter A20 15-> 17 8 mm - 6x shaft adapter A16 10-> 12 6 mm Replacement motor / conversion kit suitable for the following items: - Brawa 1151 |
29.99 EUR*
Art.-no. MicromotorEU_NF001G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann V 100 / BR 212 / BR211.
Replaces engine 507230. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S001v03 - 2x shaft adapter A1 10-> 15 12 mm - 2x auger W0.4-4-5 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7215 - Fleischmann 7228 - Fleischmann 7229 - Fleischmann 7230 - Fleischmann 7231 |
29.99 EUR*
Art.-no. MicromotorEU_NF002G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann V 160 / BR 210 / BR 218.
Replaces engine 507232. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S008v03 - 2x shaft adapter A2 10-> 15 20 mm - 2x auger W0.4-4-5 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7232 - Fleischmann 7233 - Fleischmann 7234 - Fleischmann 7238 - Fleischmann 7239 |
29.99 EUR*
Art.-no. MicromotorEU_NF003G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann NS 1600 / SNCF BB 1500, 1600, 22200, 7200.
Replaces engine 507360 or 507364. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S008v03 - 1x shaft adapter A3 10-> 15 23 mm - 1x shaft adapter A5 10-> 15 26 mm - 2x worm W0.4-4-7 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7360 - Fleischmann 7361 - Fleischmann 7362 - Fleischmann 7363 - Fleischmann 7364 |
29.99 EUR*
Art.-no. MicromotorEU_NF004
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann works locomotive, rail cleaning locomotive.
Replaces engine 507218 and 507968. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S008v03 - 1x shaft adapter A4 10-> 15 12.5 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7218 - Fleischmann 7968 - Fleischmann 7969 |
29.99 EUR*
Art.-no. MicromotorEU_NF005G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann BR 614 multiple units.
Replaces engine 507430. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S008v03 - 1x shaft adapter A6 10-> 15 22 mm - 1x worm W0.4-4-5 Replacement motor / conversion kit suitable for the following items: - Fleischmann 7430 - Fleischmann 7431 - Fleischmann 7434 - Fleischmann 7438 |
29.99 EUR*
Art.-no. MicromotorEU_NF006G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann BR38 tub tender, BR50 tub tender, BR 78, SNCF 232.
Replaces engine 507078. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S008v03 - 1x shaft adapter A7 10-> 15 15 mm - 1x worm W0.4-4-8 Replacement motor / conversion kit suitable for the following items: - Fleischmann 7075 - Fleischmann 7076 - Fleischmann 7077 - Fleischmann 7078 - Fleischmann 7079 - Fleischmann 7162 - Fleischmann 7166 - Fleischmann 7179 - Fleischmann 7183 |
29.99 EUR*
Art.-no. MicromotorEU_NF007
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann BR50 cabin tender.
Replaces engine 507182. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S013V03 - 1x shaft adapter A8 10-> 15 4.5 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7182 (Tandwiel) |
29.99 EUR*
Art.-no. MicromotorEU_NF008G
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Fleischmann locomotive 7.
Replaces engine 507160. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816S - 1x motor mount S006V01 - 1x shaft adapter A9 10-> 15 8 mm - 1x worm W0.4-4-5 Replacement motor / conversion kit suitable for the following items: - Fleischmann 7000 |
29.99 EUR*
Art.-no. MicromotorEU_NF009G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Fleischmann BR 38 K, DRG 01.10, P8, BR 23, BR 011, BR 012.
Replaces engine 507160. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S006V01 - 1x shaft adapter A9 10-> 15 8 mm - 1x worm W0.4-4-5 - 2x strand 40 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7123 - Fleischmann 7126 - Fleischmann 7159 - Fleischmann 7160 - Fleischmann 7161 - Fleischmann 7163 - Fleischmann 7164 - Fleischmann 7167 - Fleischmann 7168 - Fleischmann 7169 - Fleischmann 7170 - Fleischmann 7171 - Fleischmann 7172 - Fleischmann 7173 - Fleischmann 7174 |
29.99 EUR*
Art.-no. MicromotorEU_NF010
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Fleischmann NS Wadloper, Pendolino, BR 628
Replaces engine 507428. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0816D - 1x motor mount S028 FLM 11,8mm MU v1 - 1x shaft adapter A9 10-> 15 8 mm - 1x shaft adapter A4 10-> 15 12.5 mm - 2x strand 40 mm Replacement motor / conversion kit suitable for the following items: - Fleischmann 7415 - Fleischmann 7427 - Fleischmann 7428 - Fleischmann 7471 |
29.99 EUR*
Art.-no. MicromotorEU_NF011C
Micromotor.EU
From now on we will take over the distribution of Micromotor.eu products in Germany. Some of the sophisticated conversion kits are manufactured in our production facility. Assembly, testing and packaging take place entirely at our location. The production of the conversion kits in Issum is already in full swing so that we can offer the entire N gauge range in stock in a timely manner.
Conversion kit with high-quality bell armature motor, compatible with Fleischmann spare part motor 50721001 Suitable for all V 100 Ost locomotives built up to 2019 Fleischmann 7210xx, 7211xx, as well as the locomotives from the respective starter sets. Conversion kit no longer fits into the new models from 2020. The Fleischmann locomotive is not included in the set. Scope of delivery: - 1x motor 0816D - 1x motor holder S019 Flm V110 DR MU v2 - 1x shaft adapter A21 10-> 15 14 mm - 1x shaft adapter A4 10-> 15 12.5 mm - 2x auger W0.3-3-5.5 - 1x flywheel F006 - 2x strand Replacement motor / conversion kit suitable for the following locomotives: - 721001 BR 110 bordeaux of the DR - 721002 BR 114 of the DR - 721003 BR 203 of the DB Netz - 721004 Diesel locomotive 1001 BTE Weser Bahn - 721005 Diesel locomotive BR 112 DR - 721006 Diesel locomotive BR 204, DB AG - 721007 Diesel locomotive class 111, DR - 721010 Diesel locomotive BR 110 DR - 721086 DCC digital diesel locomotive BR 204 671-5 DB - 721 101 BR 203, DB Regio Franconia - 721102 BR 203 of SBB Cargo - 721105 Diesel locomotive BR 203 VolkerRail |
29.99 EUR*
Art.-no. MicromotorEU_NG001
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Graham Farish Class 08 / NS 500-600 Hippel Class J94 / NS 8800.
The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. Scope of delivery: - 1x motor 0716S - 1x shaft adapter A10 10-> 15 7 mm Replacement motor / conversion kit suitable for the following items: - Graham Farish 1001 - Graham Farish 1002 - Graham Farish 1003 - Graham Farish 1004 - Graham Farish 1005 - Graham Farish 1006 - Graham Farish 1007 - Graham Farish 1008 - Graham Farish 1010 |
29.99 EUR*
Art.-no. MicromotorEU_NM001G
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Minitrix V 60 / BR 261 / SNCB BR 260.
Replaces engine 41206407. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. scope of delivery - 1x motor 0716S - 1x motor mount S018 - 1x shaft adapter A1 10-> 15 12 mm - 1x worm W0.4-4-5 Replacement motor / conversion kit fit the following locomotives: - Minitrix 2064 - Minitrix 2065 - Minitrix 11031 - Minitrix 12064 - Minitrix 12066 - Minitrix 12098 |
29.99 EUR*
Art.-no. MicromotorEU_NM002
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Minitrix E10, BR110, E40, BR140.
The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S005 - 2x shaft adapter A13 10-> 12 3 mm - 2x strand Replacement motor / conversion kit fit the following locomotives: - Minitrix 2930 - Minitrix 2931 - Minitrix 2932 |
29.99 EUR*
Art.-no. MicromotorEU_NM003C
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Minitrix BR103, BR151.
Replaces engine 41205604. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S012 - 2x shaft adapter A17 10-> 15 27 mm - 2x worm W0.4-5-6 - 2x flywheels F008 - 2x strand Replacement motor / conversion kit fit the following locomotives: - Minitrix 51 2056 00 - Minitrix 51 2057 00 - Minitrix 51 2068 00 - Minitrix 51 2156 00 - Minitrix 51 2157 00 - Minitrix 11001 - Minitrix 12056 - Minitrix 12057 - Minitrix 12068 - Minitrix 12156 - Minitrix 12157 - Minitrix 12930 - Minitrix 12933 |
29.99 EUR*
Art.-no. MicromotorEU_NM004C
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Minitrix NS 1200.
Replaces engine 41296705. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S012 - 2x shaft adapter A18 10-> 15 31 mm - 2x worm W0.4-5-6 - 2x flywheels F007 - 2x flywheels F008 - 2x strand Replacement motor / conversion kit fit the following locomotives: - Minitrix 11081 - Minitrix 12731 - Minitrix 12826 - Minitrix 12827 - Minitrix 12828 - Minitrix 12866 |
29.99 EUR*
Art.-no. MicromotorEU_NM005C
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Minitrix NS Koploper.
Replaces engine 41282908. The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S012 - 2x shaft adapter A1 10-> 15 12 mm - 1x worm W0.4-5-6 - 1x flywheel F010 - 2x strand Replacement motor / conversion kit fit the following locomotives: - Minitrix 12184 - Minitrix 12500 - Minitrix 12749 - Minitrix 12829 - Minitrix 12865 |
29.99 EUR*
Art.-no. MicromotorEU_NM006G
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Minitrix NS 1100.
Replaces engine 40011800. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 2x motor mounts S009 - 2x shaft adapter A1 10-> 15 12 mm - 2x worm W0.4-5-6 - 2x strand Replacement motor / conversion kit fit the following locomotives: - Minitrix 1005 - Minitrix 1030 - Minitrix 2069 - Minitrix 2933 - Minitrix 2934 - Minitrix 12069 - Minitrix 12797 - Minitrix 12824 - Minitrix 12825 - Minitrix 12894 - Minitrix 12934 |
29.99 EUR*
Art.-no. MicromotorEU_NM007
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix NS SBB RAM TEE.
Replaces Motor 329904. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads. scope of delivery - 1 x engine 0816D - 1x motor mount S026 - 2x shaft adapter A1 10->15 12 mm - 2x wire Replacement motor / conversion kit fits the following locomotives: - Minitrix 12224 - Minitrix 12253 - Mini trix 12338 - Minitrix 12440 |
29.99 EUR*
Art.-no. MicromotorEU_NM008G
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Minitrix BR 24 BR 64.
Replaces engine 41202907. The locomotive is not included in the scope of delivery. You will find installation instructions under Downloads. scope of delivery - 1x motor 0716S - 1x motor mount S018 - 1x shaft adapter A1 10-> 15 12 mm - 1x worm W0.4-4-5 Replacement motor / conversion kit fit the following locomotives: - Minitrix 2028 - Minitrix 2029 - Minitrix 2030 - Minitrix 2038 - Minitrix 2039 - Minitrix 2040 - Minitrix 11415 - Minitrix 11440 - Minitrix 12026 - Minitrix 12027 - Minitrix 12028 - Minitrix 12030 - Minitrix 12211 - Minitrix 12038 - Minitrix 12039 - Minitrix 12040 - Minitrix 12732 - Minitrix 12836 - Minitrix 12839 |
29.99 EUR*
Art.-no. MicromotorEU_NM009G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 54.15 DB / DRG, G 3/4 H.
Replaces engine E305934. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads. scope of delivery - 1 x engine 0816S - 1x motor mount S011 Minitrix motor met 1 ring MU v2 - 1x shaft adapter A10 10->15 7 mm - 1x snail W0.3-3-5.5 - 2x brass thread inserts M1.6x2/3 - 2x screw M1.6x4 Replacement motor / conversion kit fits the following locomotives: - Minitrix 1029 - Minitrix 2902 - Minitrix 2903 - Minitrix 2904 - Minitrix 51 1029 - Minitrix 11029 - Minitrix 11083 - Minitrix 11089 - Minitrix 11467 - Minitrix 12245 - Mini trix 12308 - Mini Trix 12348 - Minitrix 12354 - Mini trix 12902 - Mini trix 12903 - Mini trix 12904 |
29.99 EUR*
Art.-no. MicromotorEU_NM010G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 52 DB / DRG, SNCB 26, SNCF 150 Y, ÖBB 52.
Replaces engine 41205120. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads. scope of delivery - 1 x engine 0816S - 1x motor mount S011 Minitrix motor met 1 ring MU v2 - 1x shaft adapter A22 10->15 10 mm - 1x snail W0.4-4-5 - 2x brass thread inserts M1.6x2/3 - 2x screw M1.6x4 Replacement motor / conversion kit fits the following locomotives: - Minitrix 2051 - Minitrix 2083 - Minitrix 2151 - Minitrix 11451 - Mini trix 12045 - Mini trix 12051 - Minitrix 12083 - Mini trix 12151 - Mini trix 12303 - Mini trix 12325 - Mini trix 12407 - Mini trix 12409 - Mini trix 12418 - Mini trix 12441 - Minitrix 12618 - Mini trix 12712 - Minitrix 12742 - Minitrix 12743 - Minitrix 12775 - Minitrix 12794 - Minitrix 12805 |
29.99 EUR*
Art.-no. MicromotorEU_NM011G
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 56.11 DB, DRG 56.8-11, K.Bay.Sts.B. G 4/5 H, SNCF 140 D.
Replaces engine 41290240. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads. scope of delivery - 1 x engine 0816S - 1x motor mount S011 Minitrix motor met 1 ring MU v2 - 1x shaft adapter A9 10->15 8mm - 1x snail W0.3-3-5.5 - 2x brass thread inserts M1.6x2/3 - 2x screw M1.6x4 Replacement motor / conversion kit fits the following locomotives: - Minitrix 1030 - Minitrix 2922 - Minitrix 2923 - Minitrix 2924 - Minitrix 12120 - Minitrix 12244 - Mini trix 12603 - Mini Trix 12607 - Minitrix 12922 - Minitrix 12923 - Minitrix 12924 |
29.99 EUR*
Art.-no. MicromotorEU_NM012
Micromotor.EU
Conversion kit with high-quality coreless motor, compatible with Minitrix BR 17.2 DRG, 17.4 DRG, KPEV S 10.2, SNCF 230 E, FS 677, DRG BR 14.1, Bay S2/5, Bay S3/5.
Replaces engines 41203540, 41207740, 305934. The locomotive is not included in the scope of delivery. Installation instructions can be found under Downloads. scope of delivery - 1 x engine 0816S - 1x motor mount S011 Minitrix motor met 1 ring MU v2 - 1x shaft adapter A23 10->12 9 mm - 2x brass thread inserts M1.6x2/3 - 2x screw M1.6x4 Replacement motor / conversion kit fits the following locomotives: - Minitrix 1017 - Mini Trix 1050 - Minitrix 2077 - Minitrix 2082 - Minitrix 2088 - Minitrix 2089 - Minitrix 11017 - Minitrix 11050 - Minitrix 11072 - Mini Trix 11406 - Minitrix 11451 - Mini trix 12035 - Mini Trix 12036 - Mini trix 12077 - Minitrix 12082 - Mini trix 12088 - Mini Trix 12089 - Mini trix 12222 - Mini trix 12231 - Minitrix 12232 - Minitrix 12600 - Minitrix 12601 - Mini trix 12831 |
29.99 EUR*
Art.-no. MicromotorEU_NP001
Micromotor.EU
Conversion kit with high-quality bell armature motor, compatible with Piko T449 CSD V118 / V180 DR.
The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S002 - 2x shaft adapter A4 10-> 15 12.5 mm - 2x strand Replacement motor / conversion kit fit the following locomotives: - Piko 5/4106 |
29.99 EUR*
Art.-no. MicromotorEU_NR001
Micromotor.EU
Conversion kit with high quality bell armature motor, compatible with Roco motor 85020 BR43, BR44, SNCF 150X, E44.5, E144.5, E91, BR191, SNCF CC7100, Renfe 7630, NS 1310, ÖBB 1044, SBB Re 4/4 IV, ET85 / 485.
The locomotive is not included in the scope of delivery. You can find installation instructions under Downloads. scope of delivery - 1x motor 0816D - 1x motor mount S020 - 2x shaft adapter A10 10-> 15 7 mm - 2x shaft adapter A19 10-> 15 7 mm - 2x strand Replacement motor / conversion kit fit the following locomotives: - Roco 2106 - Roco 2154 - Roco 2155 - Roco 2157 - Roco 2158 - Roco 2160 - Roco 2166 - Roco 23000 - Roco 23206 - Roco 23207 - Roco 23208 - Roco 23209 - Roco 23210 - Roco 23211 - Roco 23228 - Roco 23229 - Roco 23230 - Roco 23231 - Roco 23236 - Roco 23237 - Roco 23238 - Roco 23239 - Roco 23240 - Roco 23243 - Roco 23249 - Roco 23250 - Roco 23251 - Roco 23252 - Roco 23253 - Roco 23261 - Roco 23262 - Roco 23263 - Roco 23299 - Roco 23340 - Roco 23341 - Roco 23342 - Roco 23392 - Roco 23393 - Roco 23394 - Roco 23455 |
Yours sincerely
Daniel Mrugalski
DM-Toys