Dear customer,
here our novelties and bargains:
34.99 EUR*
Art.-no. MU_N-L00127
Modellbahn Union
Model of a viaduct made of natural stone with radius 3 396.4mm. The very detailed engraved viaduct is a curve of 22.5 degrees (= 16 parts form a circle). In addition to 2 bridgeheads / abutments, the set also contains the parts you need if you want to build several viaducts together. With the extension set MU_N-L00141 and the viaduct R4 (MU_N-L00128) it is possible to build the viaduct 2 tracks.
|
39.99 EUR*
Art.-no. MU_N-L00128
Modellbahn Union
Model of a viaduct made of natural stone with a radius of 4 430mm. The very detailed engraved viaduct is a curve of 22.5 degrees (= 16 parts form a circle). In addition to 2 bridgeheads / abutments, the set also contains the parts you need if you want to build several viaducts together. With the extension kit MU_N-L00141 and the viaduct R3 (MU_N-L00127) it is possible to build the 2 track viaduct.
|
14.99 EUR*
Art.-no. MU_N-L00141
Modellbahn Union
With the expansion set it is possible to couple the viaducts R3 and R4 (MU_N-L00127 / MU_N-L00128) and use them as a 2-track viaduct.
|
59.99 EUR*
Art.-no. MU_N-L00129
Modellbahn Union
Highly detailed engraved kit with 19 pillars which allow a gradient of 2%. The starting height is 2.5mm (base plate only) and goes in steps from 2.5mm high to 50mm. Ten pillars stand on a base, the remaining 9 are made without a base. This set can be combined with Set 2 (MU_N-L00143) and then has a total length of 3 meters on a straight line.
|
29.99 EUR*
Art.-no. MU_N-L00143
Modellbahn Union
Highly detailed engraved kit with 10 pillars which allow a gradient of 2%. The initial height is 52.5mm and ranges from 2.5 high to 75mm. and opens up our curved viaducts (N-L00127 & N-L00128). All pillars are on a base. This set can be combined with Set 1 (N-L00129) and then has a total length of 3 meters on a straight line.
|
9.99 EUR*
Art.-no. MU_N-L00142
Modellbahn Union
Set with 3 straight bridges (111mm) for our driveway sets 1 & 2 (N-L00129 and N-L00143).
|
9.99 EUR*
Art.-no. MU_N-L00130
Modellbahn Union
Set with 3 curved bridges radius 3 396,4mm (22.5 degrees) for our driveway sets 1 & 2 (N-L00129 and N-L00143).
|
11.99 EUR*
Art.-no. MU_N-L00131
Modellbahn Union
Set with 3 curved bridges radius 4 430mm (22.5 degrees) for our driveway sets 1 & 2 (N-L00129 and N-L00143).
|
6.99 EUR*
Art.-no. MU_N-L00144
Modellbahn Union
|
6.99 EUR*
Art.-no. MU_N-L00145
Modellbahn Union
|
6.99 EUR*
Art.-no. MU_N-L00146
Modellbahn Union
|
6.99 EUR*
Art.-no. MU_N-L00147
Modellbahn Union
|
14.99 EUR*
Art.-no. MU_N-i00050
Modellbahn Union
Buildings from the new Bauhof building series from epoch IV
|
14.99 EUR*
Art.-no. MU_N-i00051
Modellbahn Union
Buildings from the new Bauhof building series from epoch IV
|
9.99 EUR*
Art.-no. MU_N-i00052
Modellbahn Union
Buildings from the new Bauhof building series from epoch IV
|
6.99 EUR*
Art.-no. MU_N-i00053
Modellbahn Union
Storage walls made of concrete, accessories for the new building series Bauhof from epoch IV
|
399.99 EUR*
Art.-no. Minitrix_16031
Minitrix
Prototype: German Federal Railroad (DB) steam locomotive 003 268-0 with Witte smoke deflectors. Operating condition around 1970.
Highlights: - engine lighting. - Cab lighting. - Digital sound with many functions. Model: Tender made of die-cast metal. Built-in digital decoder and sound generator with the formats DCC and Selectrix. Locomotive and tender short-coupled. 3 axles powered in the tender, traction tires. 3-light headlights, engine lighting and cab lighting made of warm white LED. The headlights change over with the direction of travel and operate in analog mode. Length over buffers 150 mm. One-time series. |
379.90 EUR*
Art.-no. Fleischmann_714472
Fleischmann
Steam locomotive BR 44.0 with oil tender of the Deutsche Reichsbahn (DR-Ost), epoch IV.
Redesign 2019! With Henning sound Cab interior lighting can be controlled digitally Engine lighting with 3 lamps on each side can be controlled digitally High-seated DR smoke deflectors. Circulating sheet with apron. Smoke chamber door with central lock. DR lamps. Pumps in front. Driver's cab with skylight and protective grille. Medium driving axles with smaller flanges. A clear view between the boiler and chassis. Lok Tender close coupling. Undercarriage without indusi. Technical highlights: Next18 digital interface (NEM 662). Current consumption for locomotive and tender. Close coupling on the locomotive at the front. Drive in the tender with 4 traction tires, one drive axle pivoted. Two spring-mounted tender axles. |
184.90 EUR
(RRP*)
154.99 EUR*
Art.-no. Fleischmann_738012
Fleischmann
Electric locomotive 151 062 of the Railpool.
Model exclusively available from FLEISCHMANN The prototype delivers 5,962 kW (8,100 hp), weighs 118 tons and has a top speed of 120 km / h. A total of 170 units of the heavy freight locomotive were delivered between 1972 and 1978. DB Cargo AG sells 200 locomotives to a consortium around Railpool and Toshiba. According to the DB Group, the electric locomotives of the 151 series will be offered for rent after the sale, which also gives DB Cargo the option of leasing back up to 100 locomotives, depending on the order situation. The other locomotives are to be offered on the open market |
269.90 EUR
(RRP*)
224.99 EUR*
Art.-no. Fleischmann_738092
Fleischmann
Electric locomotive 151 062 of the Railpool. Model with built-in, load-controlled digital decoder and equipped with prototypical sound ex works.
Painted and labeled true to the original. Inserted windows. Drive on four axes. Triple LED headlights that change with the direction of travel. - Model exclusively available from FLEISCHMANN The prototype delivers 5,962 kW (8,100 hp), weighs 118 tons and has a top speed of 120 km / h. A total of 170 units of the heavy freight locomotive were delivered between 1972 and 1978. DB Cargo AG sells 200 locomotives to a consortium around Railpool and Toshiba. According to the DB Group, the locomotives of the 151 series are offered for rent after the sale, which also enables DB Cargo to lease up to 100 locomotives depending on the order situation. The other locomotives are to be offered on the open market |
269.90 EUR*
Art.-no. Fleischmann_742206
Fleischmann
Diesel multiple unit series 5022 "Cityjet", the Austrian Federal Railways.
- Painted and labeled true to the original - Installed windows - With interior, prepared for interior lighting - Execution in the current "Cityjet" design by ÖBB. - Licensed ÖBB model Close coupling via a guided Jakobs bogie between the vehicles. Dummy coupling at the ends of the vehicle. Adapters with a slot according to NEM 355 and PROFI couplings 9545 for multiple traction are included. |
359.90 EUR
(RRP*)
299.99 EUR*
Art.-no. Fleischmann_742277
Fleischmann
Diesel multiple unit Rh 5022 "Cityjet", the Austrian Federal Railways.
- Execution in the current "Cityjet" design by ÖBB. - Licensed ÖBB model Model with built-in, load-controlled digital decoder and equipped with prototypical sound ex works. Painted and labeled true to the original. Inserted windows. With interior, prepared for interior lighting. Close coupling via a guided Jakobs bogie between the vehicles. Dummy coupling at the ends of the vehicle. Adapters with a slot according to NEM 355 and PROFI couplings 9545 for multiple traction are included. |
224.90 EUR*
Art.-no. Fleischmann_706483
Fleischmann
Steam locomotive series 064 of the Deutsche Bundesbahn.
- Replica of the version with welded water boxes - Model with built-in load-controlled DCC digital decoder The class 64 tank locomotives were developed by the Deutsche Reichsbahn Gesellschaft in 1926. After the Second World War, 278 machines remained with the DB. Here they were mainly used in passenger and freight train service on branch lines. |
34.90 EUR*
Art.-no. Mafen_383001
Mafen
Traffic lights:
- true to scale. (1: 160) - "Fine Scale" product - LED SMD included. - Brass tube 0.8mm in diameter. - Resistors up to 21 V (direct current) included. |
29.90 EUR*
Art.-no. Mafen_383002
Mafen
Pedestrian traffic lights:
- true to scale. (1: 160) - "Fine Scale" product - LED SMD included. - Brass tube 0.8mm in diameter. - Resistors up to 21 V (direct current) included. |
49.90 EUR*
Art.-no. Mafen_383003
Mafen
Traffic lights with pedestrian lights:
- true to scale. (1: 160) - "Fine Scale" product - LED SMD included. - Brass tube 0.8mm in diameter. - Resistors up to 21 V (direct current) included. |
9.99 EUR*
Art.-no. Diverse_UH5854
Diverse
Finally one of our top sellers is available again!
True to the original replica of the Komatsu construction vehicle on a scale of N 1: 160. Detailed model made of die-cast metal. The product is originally a high-quality metal key ring, the attached chain can be easily removed with pliers and the product is ready for use on your model railway. |
10.78 EUR*
Art.-no. Lemke_LC3891
Lemke
In the late summer of 1967, the VW factory presented the successor to the first VW Bully generation as T2. The T2 was a complete redesign, based on the experience gained with the T1 model with numerous body versions and body variants.
|
10.79 EUR*
Art.-no. Lemke_LC3876
Lemke
In the late summer of 1967, the VW factory presented the successor to the first VW Bully generation as T2. The T2 was a complete redesign, based on the experience gained with the T1 model with numerous body versions and body variants.
|
37.40 EUR*
Art.-no. ESU_59827
ESU
The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price.
LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs. Modes The LokPilot 5 micro DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically. It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255. The LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs which can be adjusted for difficult cases. The unique "Autotune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors. Safety A PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro. Protection Of course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible. |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56910
Noch
red, 25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56940
Noch
colorful, 25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56964
Noch
25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56965
Noch
red, 25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56970
Noch
red, 25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56971
Noch
gray, 25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
1.89 EUR*
(312.50cm², base price 60.48 EUR/m²)
Art.-no. Noch_56981
Noch
25 x 12.5 cm
The “3D cardboard plate“ clinker ”” in gauge N is realistically printed on strong cardboard in matt color and then shaped. The embossed wall panels are ideally suited to recreate buildings, village squares, paths, cobblestones or high-quality one-offs in greater detail than ever before. The cardboard sheets can easily be cut to size. Thanks to the high-quality cardboard, the panels can be easily bent and thus perfectly installed. Create a unique piece with the 3D cardboard sheets! |
11.99 EUR*
Art.-no. Wiking_096239
Wiking
Ulm turntable ladder legend with squad cabin
This fire fighter classic has a distinctive nostalgic aura - even in 1: 160! Because the Rundhauber is one of the real legends of Ulm origin. WIKING miniaturizes the DL 25 h turntable ladder with a movable ladder and equips the emergency vehicle with a squad cabin. Cab, blue-transparent glazing, black chassis. Construction with red ladder block. Ladder parts silver. Headlights and radiator grille with decorative frame and Magirus logo printed in silver. |
66.49 EUR*
Art.-no. Faller_163710
Faller
Make the vehicle stand model of your choice suitable for the car system.
Chassis kit for the motorization of N-truck and N-bus standing models for car system operation. The set contains all the necessary vehicle components that are required for the construction of a fully functional, two- or three-axle Car System track N-chassis (bus and truck), except for batteries: motor with worm, motor holder with worm wheel and drive axle, drive wheels, Front axle with wheels, handlebar with magnet, front axle mount, switch, charging socket, reed sensor, resistors for setting the charging current. Tag info: - The motor can be fixed in the gear unit either lying (e.g. in buses and trucks with a low body) or standing (e.g. in semitrailers) - Center distances (horizontal motor) between 25 mm and 43 mm continuously selectable - Center distances (stationary motor) between 20 mm and 40 mm continuously selectable - Width: approx. 16 mm |
Yours sincerely
Daniel Mrugalski
DM-Toys