Dear customer,
here our novelties and bargains:
14.99 EUR*
Art.-no. MU_N-B00105
Modellbahn Union
The Millingen Mo signal box is a mechanical signal box which was put into operation in 1951. It is located on the Rheinhausen-Kleve railway line at 22.8 kilometers.
|
29.99 EUR*
Art.-no. RAILNSCALE_N9056
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create beautiful, custom stone paved streets. Role the air-drying modeling clay, and print the desired road pattern in the wet clay. The roller is 84 mm wide and has a row paving pattern. This tool can be combined with the other RAILNSCALE tools.
This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed parts are made of 3D printed plastic and are delivered unpainted. |
34.90 EUR*
Art.-no. Artitec_316.072
Artitec
Hand-colored finished model made of resin and with etched parts
|
37.40 EUR*
Art.-no. Artitec_316.073
Artitec
Hand-colored finished model made of resin and with etched parts
|
18.90 EUR*
Art.-no. Artitec_316.075
Artitec
Hand-colored finished model made of resin and with etched parts
|
99.90 EUR
(RRP*)
49.99 EUR*
Art.-no. Jaegerndorfer_JC60315
Jägerndorfer
Set with three two-axle passenger cars type Bi. Different inscriptions, half window variations, 1x half window, 2x full window
Based on the experiences before the war, the program for the production of frame cars was developed by ÖBB at the end of the 1940s. With as few as possible, uniquely designed parts should be tried to replace the wooden boxes of a large number of old buildings by steel structures. Basically, it was decided to build all two- and three-axle vehicles uniformly as a two-axle vehicle. The body frame was made of prefabricated frame "frames", which consisted of commercial rolled profiles made. In the design of the interior, it was decided to use a large space with the seat division 2 + 2. The conversion program was in addition to two- and three-axle Austrian designs and vehicles of German Länderbahnbauarten, which had remained at the end of the war on the territory of Austria included. |
109.90 EUR
(RRP*)
74.99 EUR*
Art.-no. Fleischmann_881813
Fleischmann
Three-piece express train passenger car set of the Swiss SBB, epoch IV.
The set consists of a luggage, a 1./2. Kl.- and a 2. Kl.-Wagen. This has a different serial number than the wagons from the set 881814. With interior decoration. Prototypically painted and labeled. Used windows. Intended for interior lighting. On both sides slide mechanism for real close coupling operation. Coupler pocket according to NEM 355. The models of the SBB express train passenger cars from the so-called conversion series were developed from 1955 to 1963 from cars with wooden superstructures, which were replaced by steel superstructures. The FLEISCHMANN models have specially designed handlebars and filigree roof ventilators. |
73.90 EUR
(RRP*)
49.99 EUR*
Art.-no. Fleischmann_881814
Fleischmann
Two-piece express train passenger car set of the Swiss SBB, epoch IV.
The set consists of two second class wagons with different ordinal numbers, which also differ from the second class wagon of the 881813 set. With interior decoration. Prototypically painted and labeled. Used windows. Intended for interior lighting. On both sides slide mechanism for real close coupling operation. Coupler pocket according to NEM 355. The models of the SBB express train passenger cars from the so-called conversion series were developed from 1955 to 1963 from cars with wooden superstructures, which were replaced by steel superstructures. The FLEISCHMANN models feature specially designed handlebars and filigree roof ventilators. |
199.90 EUR
(RRP*)
159.99 EUR*
Art.-no. Fleischmann_737215
Fleischmann
Electric locomotive Ae 610, SBB (Cargo), Ep. VI
Technically revised model: - Swiss light change - Triple LED headlights that change with the direction of travel - Close coupler motion link - Digital interface - Closed front apron for optional mounting included |
264.90 EUR
(RRP*)
199.99 EUR*
Art.-no. Fleischmann_781873
Fleischmann
Electric locomotive BR1216 "Railjet" of th Czech State Railways CD, Epoche VI.
Model equipped with in-built load sensing digital decoder and true to the origianl sound functions from factory. Rich detailing on the model that features 4 pantographs, 2 red tail lights and triple LED headlights. LED illumination. Motor with flywheel. Drive on all four axles. 2 traction tyres. Coupler pocket according to NEM 355 standards and close coupling mechanism. This locomotive perfectly matches the EC "Porta Bohemica" (items 881806 - 881809) which runs between Prague and Kiel. |
151.90 EUR
(RRP*)
99.99 EUR*
Art.-no. Arnold_HN2354
Arnold
Diesel locomotive class V60D of the DR in red / gray livery
Road number V60 1020 Special features: Interface Next 18 Close coupling mechanism Clutch bag (s) - NEM 363 Die-cast metal body Chassis made of die-cast metal directional lighting flywheels |
42.90 EUR
(RRP*)
16.99 EUR*
Art.-no. Arnold_HN4259
Arnold
DB, 2-axle postal car Post 2-a/14, epoch IV
|
34.99 EUR*
Art.-no. Arnold_HN4266
Arnold
Cisalpino, passenger coach A, silver/grey livery, 1st class, period V
|
31.41 EUR*
Art.-no. Arnold_HN4267
Arnold
Cisalpino, passenger coach B, silver/grey livery, 2ndt class, period V
|
31.41 EUR*
Art.-no. Arnold_HN4268
Arnold
NS, passenger coach Avmz, blue/yellow livery, 1st class, period V
|
31.41 EUR*
Art.-no. Arnold_HN4269
Arnold
NS, passenger coach Bm, blue/yellow livery, 2nd class, period V
|
49.99 EUR
(RRP*)
29.99 EUR*
Art.-no. Hobbytrain_H22101-1
Hobbytrain
3-axle post baggage car F3ü
License Note: Models of CIWL cars are manufactured to the highest standard under license and with the permission of Wagons Lits Diffusion France. Model Features: - Ep. I - very detailed chassis and roof structures - finest printing - Shaft NEM 355 with KK kinematics |
29.99 EUR*
Art.-no. Sowa-N_1617
Sowa-N
Wagon without short couplings
|
14.40 EUR
(RRP*)
3.99 EUR*
Art.-no. Beli-Beco_116622
Beli-Beco
Filigree finished model made of metal.
Height 45 mm Light bulb 9516 Note: All Beli Beco railway lamps are manufactured in Germany and are equipped with 16- or 19-volt bulbs or 3-volt LEDs. Railroad lamps with 3 volt LEDs are supplied with resistor and protection diode for connection to 16 volts. |
109.99 EUR*
Art.-no. ESU_58813
ESU
LokSound 5 micro DCC/MM/SX/M4 "empty decoder", single wires, retail, with speaker 11x15mm
The LokSound 5 micro is a "little miracle": With a footprint of only 21mmx10mm, it is by far the smallest LokSound decoder that we have ever built. It should therefore be used in all vehicles of the nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker along with a sound capsule kit is also always included. Operating modes: The LokSound 5 micro is also a real multi-protocol decoder. It can handle the DCC data format just like Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are just as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital command station. It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with the appropriate central units. Auxiliary registers exist for command stations that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable 16 functions to be triggered. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol permits automatic registration with mfx®-compatible control panels. The LokSound 5 micro decoder recognizes the Märklin® braking sections as well as ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC braking modules or with direct current is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokSound 5 micro decoder can be used on analogue DC and AC railways (!). audio: The LokSound 5 micro decoder can play back up to 10 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio power amplifier with an output power of up to 3W controls the loudspeakers, which can have an impedance between 4 ohms and 32 ohms. The huge 128 Mbit sound memory provides enough capacity. All individual sounds can be individually adjusted in volume. The super flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles. Features: Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs and a logic level output. There are two more logic level outputs on the Next18 interface, which can alternatively control RC servos. All important light functions are available. The brightness of each output can be adjusted separately. The decoder masters the automatic pressing on and off when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control: The engine control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency of 10kHz to 50kHz ensures super-quiet operation, especially with coreless motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. With a motor current of up to 0.75A, the LokSound 5 decoder supplies enough juice for all intended use scenarios. Technical specifications: - Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix® - 32 switchable functions (depending on the control panel) - 32-bit processor - Digital class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W) - Each channel in 16-bit resolution and 31250 kHz sample rate - Sound memory with 128 Mbit capacity - Motor control with 50 kHz switching frequency - RC servos and Susi modules can be controlled - 3 new, individually adjustable brake controllers - Two-stage heavy duty simulation - Updateable with ESU-LokProgrammer LokSound 5 micro: - Motor current 0.75 A - Depending on the interface, up to 6 amplified function outputs for special functions (total: 9 outputs) - Next18 interface as standard, adapter cables for other interfaces are included - Factory fitted 11x15mm “sugar cube” speaker with adjustable soundcap kit - RC servos and Susi modules can be controlled - PowerPack storage capacitor can be connected as an option - Dimensions: 21mm x 10mm Interfaces: - 8-pin NEM 652 - PluxX16 - 6-pin NEM 651 - Next18 desired sound We would be happy to equip the decoder with your desired sound for an additional charge of EUR 10. At the top and bottom of this page you will find a desired sound input field. There you will also find a link to the manufacturer's sound projects. Find the right project and enter the name in the field. As soon as you add the item to the shopping cart, the desired sound is saved and the price is increased by EUR 10. |
109.99 EUR*
Art.-no. ESU_58816
ESU
LokSound 5 micro DCC/MM/SX/M4 "empty decoder", NEM651, retail, with speaker 11x15mm
The LokSound 5 micro is a "little miracle": With a footprint of only 21mmx10mm, it is by far the smallest LokSound decoder that we have ever built. It should therefore be used in all vehicles of the nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker along with a sound capsule kit is also always included. Operating modes: The LokSound 5 micro is also a real multi-protocol decoder. It can handle the DCC data format just like Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are just as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital command station. It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with the appropriate central units. Auxiliary registers exist for command stations that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable 16 functions to be triggered. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol permits automatic registration with mfx®-compatible control panels. The LokSound 5 micro decoder recognizes the Märklin® braking sections as well as ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC braking modules or with direct current is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokSound 5 micro decoder can be used on analogue DC and AC railways (!). audio: The LokSound 5 micro decoder can play back up to 10 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio power amplifier with an output power of up to 3W controls the loudspeakers, which can have an impedance between 4 ohms and 32 ohms. The huge 128 Mbit sound memory provides enough capacity. All individual sounds can be individually adjusted in volume. The super flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles. Features: Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs and a logic level output. There are two more logic level outputs on the Next18 interface, which can alternatively control RC servos. All important light functions are available. The brightness of each output can be adjusted separately. The decoder masters the automatic pressing on and off when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control: The engine control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency of 10kHz to 50kHz ensures super-quiet operation, especially with coreless motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. With a motor current of up to 0.75A, the LokSound 5 decoder supplies enough juice for all intended use scenarios. Technical specifications: - Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix® - 32 switchable functions (depending on the control panel) - 32-bit processor - Digital class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W) - Each channel in 16-bit resolution and 31250 kHz sample rate - Sound memory with 128 Mbit capacity - Motor control with 50 kHz switching frequency - RC servos and Susi modules can be controlled - 3 new, individually adjustable brake controllers - Two-stage heavy duty simulation - Updateable with ESU-LokProgrammer LokSound 5 micro: - Motor current 0.75 A - Depending on the interface, up to 6 amplified function outputs for special functions (total: 9 outputs) - Next18 interface as standard, adapter cables for other interfaces are included - Factory fitted 11x15mm “sugar cube” speaker with adjustable soundcap kit - RC servos and Susi modules can be controlled - PowerPack storage capacitor can be connected as an option - Dimensions: 21mm x 10mm Interfaces: - 8-pin NEM 652 - PluxX16 - 6-pin NEM 651 - Next18 desired sound We would be happy to equip the decoder with your desired sound for an additional charge of EUR 10. At the top and bottom of this page you will find a desired sound input field. There you will also find a link to the manufacturer's sound projects. Find the right project and enter the name in the field. As soon as you add the item to the shopping cart, the desired sound is saved and the price is increased by EUR 10. |
109.99 EUR*
Art.-no. ESU_58818
ESU
LokSound 5 micro DCC/MM/SX/M4 "empty decoder", Next18, retail, with speaker 11x15mm
The LokSound 5 micro is a "little miracle": With a footprint of only 21mmx10mm, it is by far the smallest LokSound decoder that we have ever built. It should therefore be used in all vehicles of the nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker along with a sound capsule kit is also always included. Operating modes: The LokSound 5 micro is also a real multi-protocol decoder. It can handle the DCC data format just like Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are just as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital command station. It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with the appropriate central units. Auxiliary registers exist for command stations that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable 16 functions to be triggered. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol permits automatic registration with mfx®-compatible control panels. The LokSound 5 micro decoder recognizes the Märklin® braking sections as well as ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC braking modules or with direct current is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokSound 5 micro decoder can be used on analogue DC and AC railways (!). audio: The LokSound 5 micro decoder can play back up to 10 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio power amplifier with an output power of up to 3W controls the loudspeakers, which can have an impedance between 4 ohms and 32 ohms. The huge 128 Mbit sound memory provides enough capacity. All individual sounds can be individually adjusted in volume. The super flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles. Features: Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs and a logic level output. There are two more logic level outputs on the Next18 interface, which can alternatively control RC servos. All important light functions are available. The brightness of each output can be adjusted separately. The decoder masters the automatic pressing on and off when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control: The engine control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency of 10kHz to 50kHz ensures super-quiet operation, especially with coreless motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. With a motor current of up to 0.75A, the LokSound 5 decoder supplies enough juice for all intended use scenarios. Technical specifications: - Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix® - 32 switchable functions (depending on the control panel) - 32-bit processor - Digital class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W) - Each channel in 16-bit resolution and 31250 kHz sample rate - Sound memory with 128 Mbit capacity - Motor control with 50 kHz switching frequency - RC servos and Susi modules can be controlled - 3 new, individually adjustable brake controllers - Two-stage heavy duty simulation - Updateable with ESU-LokProgrammer LokSound 5 micro: - Motor current 0.75 A - Depending on the interface, up to 6 amplified function outputs for special functions (total: 9 outputs) - Next18 interface as standard, adapter cables for other interfaces are included - Factory fitted 11x15mm “sugar cube” speaker with adjustable soundcap kit - RC servos and Susi modules can be controlled - PowerPack storage capacitor can be connected as an option - Dimensions: 21mm x 10mm Interfaces: - 8-pin NEM 652 - PluxX16 - 6-pin NEM 651 - Next18 desired sound We would be happy to equip the decoder with your desired sound for an additional charge of EUR 10. At the top and bottom of this page you will find a desired sound input field. There you will also find a link to the manufacturer's sound projects. Find the right project and enter the name in the field. As soon as you add the item to the shopping cart, the desired sound is saved and the price is increased by EUR 10. |
0.20 EUR*
Art.-no. Piko_99690
Piko
48 pages
|
9.99 EUR
(RRP*)
4.99 EUR*
Art.-no. Revell_03946
Revell
Model kit of the Boeing 727, one of the most successful short-haul aircraft of the 1970s and 80s.
Model features: - Extended landing gear - Three engines - display stand - Decals for the Germania version - Number of parts: 51 - Length: 277 mm - Wingspan: 230 mm |
17.49 EUR
(RRP*)
6.99 EUR*
Art.-no. Revell_63946
Revell
Model kit of the Boeing 727, one of the most successful short-haul aircraft of the 1970s and 80s.
Model features: - Extended landing gear - Three engines - display stand - Decals for the Germania version - Number of parts: 51 - Length: 277 mm - Wingspan: 230 mm ATTENTION! Contain solvent-based glue and water-soluble paints. |
29.99 EUR
(RRP*)
19.99 EUR*
Art.-no. Revell_04275
Revell
- New mould
- Finely detailed surfaces with recessed panel lines - Cockpit Details - Detailed landing gear bays - Transparent parts for the windows - Detailed undercarriage legs and brake discs - Detailed tail area with APU exhaust pipe - Wings with separate navigation and landing lights - Detailed engines - Rotating front fan with finely detailed blades - Pitot tubes and antennas - Display stand Super decal set with Lufthansa markings:Boeing 747-8 D-ABYA Brandenburg msm 37827, LN 1443 country version 1 Germanyl ength 525 mm number of parts 172 wingspan 476 mm |
22.49 EUR
(RRP*)
9.99 EUR*
Art.-no. Revell_64884
Revell
The E195 is the largest aircraft in the E-Jet family, which includes four commercial jets - the E170, E175, E190 and E195 - which was launched in 2004. The E195 was designed by Embraer, the world's largest manufacturer of commercial jets for up to 130 passengers and one of the leading exporters in Brazil. A known user of the E195 is Air Dolomiti. This airline operates ten E195 models between Munich and Italy, each carrying 120 passengers on business and leisure flights. Azul Linhas Aéreas Brasileiras S.A., a Brazilian airline, operates the largest fleet of this type of jet worldwide. Since the e-jets started operating in 2004, Embraer has received 1,700 firm orders for this family of aircraft. More than 1,200 have already been delivered.
Model Features: - Cockpit replica - Detailed chassis - Detailed engines - Number of parts: 55 - Length: 267 mm - Wingspan: 200 mm Authentic decals for the following version: - Embraer E195 Air Dolomiti Main colors: 9 90 76 43 99 91 Scope of delivery: kit, building instructions, decal and 3 main colors. Preservatives, Preservatives, Agents de préservation: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE, BENZISOTHIAZOLINONE This For children over 8 years only. Use under adult supervision. Contain solvent-based glue. ATTENTION! Read (construction) instructions before use, follow them and keep them ready for reference. Not suitable for children under 8 years! Use under adult supervision. ATTENTION! Contain solvent-based glue and water-soluble paints. |
7.99 EUR
(RRP*)
3.99 EUR*
Art.-no. Revell_03970
Revell
The Eurofighter is currently the outstanding high-performance multi-role fighter aircraft of the latest generation. The Taktlwg 74 Neuburg presented a really fantastic paint job for the TigerMeet 2014 and won one of the coveted prizes.
The model: - Finely structured surfaces with recessed sheet metal joints - Detailed cockpit - Detailed chassis - Two outside tanks - 4 METEOR guided missiles - 4 AMRAAM guided missiles - 2 IRIS-T missiles - Super decal with decorative stripes for the bronze tiger version: - Eurofighter Typhoon 30 + 09 Bronze Tiger - Tigermeet 2014, Tactical Air Force Squadron 74 - Neuburg AB - Number of parts: 63 - Length: 111 mm - Wingspan: 76 mm |
15.95 EUR
(RRP*)
5.99 EUR*
Art.-no. Herpa_065146-002
Herpa
new in 03/2014 |
15.95 EUR
(RRP*)
5.99 EUR*
Art.-no. Herpa_065122-002
Herpa
new in 03/2014 |
Yours sincerely
Daniel Mrugalski
DM-Toys