Dear customer,
here our novelties and bargains:
9.99 EUR*
Art.-no. MU_N-A00085
Modellbahn Union
Dummy without function
The highly detailed parts are made of resin in 3D printing and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00084
Modellbahn Union
Dummy without function
The highly detailed parts are made of resin in 3D printing and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
7.99 EUR*
Art.-no. MU_N-A00364
Modellbahn Union
The highly detailed parts are made of resin in 3D printing and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
7.99 EUR*
Art.-no. MU_N-A00369
Modellbahn Union
The fork is movable and adjustable in height.
The highly detailed parts are made of resin in 3D printing and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
24.99 EUR*
Art.-no. RAILNSCALE_N9532
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create beautiful, custom stone paved streets and tram rails. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our range.
Included in the two-piece set is a 28 mm wide street for ordinary roads and one for 25 mm embedded 9 mm track, which can be used to reproduce a street with an embedded tram track. Instructions in the video This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed rolls are produced from plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips. |
24.99 EUR*
Art.-no. RAILNSCALE_N9535
RAILNSCALE
With this smart RAILNSCALE innovation, you can easily create beautiful, custom stone paved streets and tram tracks. To emboss the structure, roll the rollers over rolled modeling clay. We recommend the air-drying modeling clay , which we also have in our assortment.
Included in the two-piece set is a 28 mm wide street for ordinary roads and a 22 mm wide embedded 6.5 mm track for recreating a street with an embedded tram track. Instructions in the video This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality. The highly detailed rollers are made of plastic in the 3D printing process. Visit www.railnscale.com for building instructions and crafting tips. |
199.99 EUR
(RRP*)
139.99 EUR*
Art.-no. Piko_40301
Piko
- NEM 658 plug for decoder
- LED lights |
325.00 EUR
(RRP*)
199.99 EUR*
Art.-no. Piko_40321
Piko
Form novelty in epoch IV. The constructionally caused, filigree arrangement of the main assemblies of a E-Lok-Oldtimers naturally places high demands on a model replica in the size N. The precise Nachgestaltung of the Buchliantriebs, the filigrane spoke wheels, individually attached lamps, ladders, stairs and a fine roof equipment make the Ae 3/6 an eye-catcher. The engine, which has a flywheel, drives three axles and ensures excellent running characteristics down to minimum radii of just 192 mm. The model was equipped with a PluX interface.
Rail Administration: SBB Dimension LüP: 92 mm Minimum radius: 192 mm Digital interface: NEM 658 PluX12 |
159.99 EUR
(RRP*)
99.99 EUR*
Art.-no. Piko_40416
Piko
Print version of the G 1206 in the inscription of the RU from the Netherlands
Length over buffer: 92 mm Minimum radius: 192 mm Jürgen Plack wrote an interesting review in our blog. |
254.99 EUR
(RRP*)
179.99 EUR*
Art.-no. Piko_94346
Piko
Print versions of the Swiss vintage car in a new compilation as SBB-CFF train set, consisting of one magazine cart, tool trolley and 2 accommodation cars (ex F3, B3, B2 and C2) in epoch IV
|
170.99 EUR*
Art.-no. Minitrix_15776
Minitrix
Prototype: Doppelstockwagen 1./2. Class, type DABpza 785.1, "Service" and double-decker control car 2nd class, type DBpbzfa 766.1 of the Deutsche Bahn AG (DB AG). Train run Hamburg - Rostock. Year of construction 2003.
Highlights: - Shape variant. - LED interior lighting. - Illuminated train destination displays. - Revised wheel grinders. Model: With built-in LED interior lighting, with illuminated train destination displays and kinematics for close coupling. Control car additionally equipped with white / red light change via LED and a function decoder, which is also functional in analog mode. Revised wheel grinders for better roll characteristics. Total length over buffer 334 mm. One-time series |
36.90 EUR*
Art.-no. Fleischmann_881808
Fleischmann
2nd class Eurofima passenger coach "EC Porta Bohemica" (Set 3) of the CD. Epoch VI.
The model has interior design. Lettering and livery true to the original. In-plane assembled windows. The coaches are equipped ready to install interior lighting. With different running number than item 881809. Supplement wagons to compose the EC "Porta Bohemica" that circulates between Prague and Kiel: 881807, 881808 and 881809. Suitable locomotives: 739306/739376. |
269.91 EUR*
Art.-no. Jaegerndorfer_JC62070
Jägerndorfer
E-loco E89 DRG crocodile blue-gray with imperial eagle Ep.II
When the then Austrian Federal Railways (BBÖ) needed express locomotives for the ramps of the Arlbergbahn at the beginning of the 1920s, they resorted to the model of the proven SBB crocodiles, thus taking on the typical appearance of the two long, flat stems. The first copies were put into service in 1923, followed in 1927 a total of 16 more machines of this series. After connecting Austria to the German Reich in 1938, the Deutsche Reichsbahn described the crocodiles as E89 (1100) and E89.1 (1100.1). After the Second World War, the remaining machines came as ÖBB 1089 and ÖBB1189 to the re-founded Austrian Federal Railways (ÖBB). Only in 1979, the locomotives were retired. After the war, some crocodiles were also used in Switzerland. Model Features: - all axles driven - Light change white / white - 5-pole motor - NEM 651 decoder interface (6-pin) - NEM shaft - Ep.III-IV Built in 1924 by Florisdorf and put into service as BBÖ 1100.005 Taken over in 1938 by Deutscher Reichsbahn and numbered in E89 005. Heimat Bw at DRB time: Innsbruck Use on the Arlberg route 1945: ÖBB 1953: redrawing in 1089.05 Retired 1970 in Bh Attnang-Puchheim after accident Further use as preheating system 011.04 in Bad Aussee. From this series 7 locomotives were built; their top speed was 70 km / h. Model represents the state of the locomotive between 1938 and 1945. In 1926, the BBÖ put a reinforced series 1100.100 into service, which was at the Deutsche Reichsbahn to E89 10x. |
403.11 EUR*
Art.-no. Jaegerndorfer_JC62072
Jägerndorfer
E-loco E89 DRG crocodile blue-gray with imperial eagle Ep.II
When the then Austrian Federal Railways (BBÖ) needed express locomotives for the ramps of the Arlbergbahn at the beginning of the 1920s, they resorted to the model of the proven SBB crocodiles, thus taking on the typical appearance of the two long, flat stems. The first copies were put into service in 1923, followed in 1927 a total of 16 more machines of this series. After connecting Austria to the German Reich in 1938, the Deutsche Reichsbahn described the crocodiles as E89 (1100) and E89.1 (1100.1). After the Second World War, the remaining machines came as ÖBB 1089 and ÖBB1189 to the re-founded Austrian Federal Railways (ÖBB). Only in 1979, the locomotives were retired. After the war, some crocodiles were also used in Switzerland. Model Features: - all axles driven - Light change white / white - 5-pole motor - NEM 651 decoder interface (6-pin) - NEM shaft - Ep.III-IV Built in 1924 by Florisdorf and put into service as BBÖ 1100.005 Taken over in 1938 by Deutscher Reichsbahn and numbered in E89 005. Heimat Bw at DRB time: Innsbruck Use on the Arlberg route 1945: ÖBB 1953: redrawing in 1089.05 Retired 1970 in Bh Attnang-Puchheim after accident Further use as preheating system 011.04 in Bad Aussee. From this series 7 locomotives were built; their top speed was 70 km / h. Model represents the state of the locomotive between 1938 and 1945. In 1926, the BBÖ put a reinforced series 1100.100 into service, which was at the Deutsche Reichsbahn to E89 10x. |
249.99 EUR*
Art.-no. REE_NW-130
REE Models
RGP 1 red TEE with 3 light and Kitchen, Era III X-2778 + Car XR-7778 LYON-VAISE
|
249.99 EUR*
Art.-no. REE_NW-131
REE Models
RGP 1 red TEE with 3 light and Kitchen, Era III X-2773 + Car XR-7773 NOISY
|
249.99 EUR*
Art.-no. REE_NW-132
REE Models
RGP 1 green, with Kitchen Era III X-2722 + Car XR-7722 METZ-SABLONS
|
249.99 EUR*
Art.-no. REE_NW-133
REE Models
RGP 1 green, with Kitchen Era III X-2737 + Car XR-7732 BATIGNOLLES
|
76.41 EUR*
Art.-no. Hobbytrain_H23456
Hobbytrain
In 1975, an order was placed for 100 4-axle sliding wall wagons to the Swiss Schindler Waggon AG. While the conception with the 4-piece. Sliding walls was maintained, the entire construction was much stronger than the built in France predecessor models.
|
38.61 EUR*
Art.-no. Hobbytrain_H23462
Hobbytrain
In 1975, an order was placed for 100 4-axle sliding wall wagons to the Swiss Schindler Waggon AG. While the conception with the 4-piece. Sliding walls was maintained, the entire construction was much stronger than the built in France predecessor models. The sample selection was created in cooperation with our Swiss agency Arwico AG. For this reason, some selected models (item H23453) will only be available exclusively from Arwico.
|
35.91 EUR*
Art.-no. Hobbytrain_H23463
Hobbytrain
Hobbytrain SJ Habils "Skandia" (Sweden) Freight Car, Ep.IV-V
In 1975, an order was placed for 100 4-axle sliding wall wagons to the Swiss Schindler Waggon AG. While the conception with the 4-piece. Sliding walls was maintained, the entire construction was much stronger than the built in France predecessor models. |
5.99 EUR*
Art.-no. Oxford_NMGB001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box.
Registered 419 FCR, our model is decorated in bright red with a mass of chrome to the exterior and comes with hood down to reveal the black interior and black tonneau cover. Note the distinctive MGT badge in red and silver on the boot and again in red, black and silver above the radiator grille. |
5.99 EUR*
Art.-no. Oxford_NMN008
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
9.99 EUR*
Art.-no. Oxford_NNR004CC
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box Our N scale model of the new Routemaster as used by London United is seen here resplendent in the signature red and white Coca Cola livery. Registered LTZ 1148, it is certainly eye-catching on its route Kings Cross 10 bus route. The white roof has its numbered identity LUB LT148 printed in black while the destination boards carry the Coca Cola strapline Open Happiness. |
17.99 EUR*
Art.-no. Oxford_NSHL01ST
Oxford
Ready-made model in an appealing display packaging. Vehicle with rotating wheels and a fine paint job. The ramps of the low loader are movable and can represent both driving and loading situations.
|
17.99 EUR*
Art.-no. Oxford_NTCAB007CC
Oxford
Ready-made model in an attractive display packaging. Vehicle with rotating wheels and a fine paint job.
|
5.99 EUR*
Art.-no. Oxford_NVW002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
5.99 EUR*
Art.-no. Oxford_NVW003
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
5.99 EUR*
Art.-no. Oxford_NVWB002
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
116.95 EUR
(RRP*)
105.26 EUR*
Art.-no. GF_371-063
Graham Farish
Class 03 D2383 BR Green Wasp Stripes Weathered
Featuring NEM Coupling. |
24.69 EUR*
Art.-no. Noch_61158
Noch
Postcoloration has never been so easy!
The markers are perfect for plastic models (buildings, bridges, wagons, vehicles, etc.) or laser-cut buildings to age and colorize. The result of the color aftertreatment is extremely realistic thanks to the perfectly coordinated colors. The amount of ink can be precisely dosed by the ingenious construction of the two tips. Product Highlights: - Color adheres to almost any surface such as wood, cardboard, plaster, plastic etc. - Perfectly coordinated colors for a realistic coloration - Two tips for fine and flat application of colors - Very efficient in the application Patina markers for models The markers are perfect for plastic models (buildings, bridges, wagons, vehicles, etc.) or laser-cut buildings to age and colorize. The result of the color aftertreatment is extremely realistic thanks to the perfectly coordinated colors. The amount of ink can be precisely dosed by the ingenious construction of the two tips. Contents: 6 markers in the colors leaf green, light gray, navy blue, dark brown, ocher yellow and stone |
24.69 EUR*
Art.-no. Noch_61159
Noch
Postcoloration has never been so easy!
The patina markers make post-colouration of model buildings and model landscapes a pleasure. The ingenious markers have two different tips: a soft brush tip that adapts to the structure and a wide one for the treatment of surfaces Product Highlights: - Color adheres to almost any surface such as wood, cardboard, plaster, plastic etc. - Perfectly coordinated colors for a realistic coloration - Two tips for fine and flat application of colors Very productive in use Patina markers for the landscape The innovative markers in five natural colors and a blender are ideal for the final color design of landscape elements such as rocks (plaster, hard foam, paper, etc.), walls (hard foam, paper, cardboard, etc.), model waters, etc. suitable. The applications are very diverse: the postcoloration of rocks, the treatment of water surface, z. B. to imitate a algae growth or the aging of streets and squares are just a few of the possibilities. Thanks to the "Blender pen" in the set, it is also possible to brighten or wash the ink application afterwards. Contents: 6 markers in the colors white, gray, spring green, walnut, latte and olive |
49.99 EUR*
Art.-no. Revell_05232
Revell
• One-piece hull
• Detailed deck superstructures • Decks with interiors, chairs, benches and tables • 2 movable paddle wheels with 8 blades each • Detailed bridge and chimney • Ventilation pipes • Two lifeboats • Detailed ladders and reeling • flagpole • Two anchors • Detailed decals of nostalgia decor and extensive flagging |
10.79 EUR*
Art.-no. Faller_155319
Faller
Wanderer figures 8 pieces
Seated and standing figures with and without hiking rucksack. Ideal for scenes on the forest or in a parking lot |
Yours sincerely
Daniel Mrugalski
DM-Toys