N-Scale 03/2019: MU, RAILNSCALE, Fleischmann, Busch

9.99 EUR^*

Art.-no. MU_N-A00174

Modellbahn Union

Set of 4 loudspeaker columns, two with intercom station.

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

29.99 EUR^*

Art.-no. MU_N-S00002

Modellbahn Union

The DB presented itself at the end of the 1960s as the most important transport provider in Germany. Large containers in standardized basic dimensions, which could be transported both by rail and by lorry, were among the ideas of Deutsche Bahn. This closed the last transport gap from the station to the customer. For almost all tasks, there were corresponding large containers: Cooling, pressure, bulk goods, food, fine-grade boiler and the large container for flammable liquids, beer, acid or alkalis.

For the transport on the road there were special Magirus semi-trailers which could load and unload the large containers from one side to the other with lateral loading hydraulics.

The highly detailed, unpainted finished model was produced in 3D printing and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

Kristal Clear is the secret of perfect windows.

19.99 EUR^*

Art.-no. MU_N-S00004

Modellbahn Union

The Hanomag SS 100N is the successor of the Hanomag SS100 Gigant (Giant) and was produced between 1938 and 1951. Our model depicts the double cabin version (SS 100 LN). The six cylinder engine is capable of producing 100 Hp and could be fitted with a transmission capable of reaching a maximum speed of 35,40 or 45 km/h. The post war models were renamed from SS 100 LN to ST 100 LN.

Kristal Clear is the secret of perfect windows.

29.99 EUR^*

Art.-no. MU_N-S00003

Modellbahn Union

Zetros is a Mercedes-Benz brand of trucks from Daimler AG, which is mainly designed for heavy off-road use. The vehicles in this series will be built in the Mercedes-Benz Wörth plant.

The highly detailed, unpainted finished model was produced in 3D printing and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

Kristal Clear is the secret of perfect windows.

29.99 EUR^*

Art.-no. MU_N-i00045

Modellbahn Union

The most commonly industrial sectors used for rail freight transport are gravel plants. In a gravel plant, coarse rock is treated into rock gravel of different size grit processed for further use. The previously heap passes through an assembly line in the transfer station. A small annex attached to supervise the loading and unloading of freight wagons.

9.99 EUR^*

Art.-no. MU_N-A00107

Modellbahn Union

Kit of Repair Stand for locomotives length 20 cm

9.99 EUR^*

Art.-no. RAILNSCALE_N2110

RAILNSCALE

About the original: In 1961 NSU introduced the Prinz 4. The Prinz 4 was a compact yet spacious car. The Prinz 4 was particularly popular in Italy. Until 1973 over 625,000 units were produced.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

9.99 EUR^*

Art.-no. RAILNSCALE_N2123

RAILNSCALE

About the original: The P70 was manufactured between 1955 and 1959 by IFA VEB Automobilwerk Zwickau. The P70 was one of the first production vehicles with plastic body. The P70 is the forerunner of the Trabant.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

15.99 EUR^*

Art.-no. RAILNSCALE_N2236

RAILNSCALE

About the original: The Mercedes-Benz 207D/307D diesel and 208/308 petrol were the first small vans developed by Mercedes it self. Between 1977 and 1995 almost 1 million of these ‘Bremer Transporters’ were built.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

16.99 EUR^*

Art.-no. RAILNSCALE_N2238

RAILNSCALE

About the original: The Mercedes-Benz 207D/307D diesel and 208/308 petrol were the first small vans developed by Mercedes it self. Between 1977 and 1995 almost 1 million of these ‘Bremer Transporters’ were built.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

9.99 EUR^*

Art.-no. RAILNSCALE_N2268

RAILNSCALE

About the original: The Simca 1100 (or better known as Simca 1204 in the US) was one of the first modern hatchbacks. The car proved to be very popular in Europe. Between 1967 and 1985 over 2.1 million cars were produced. The kit represents the Simca 1100 TI (1973-1978).

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

22.99 EUR^*

Art.-no. RAILNSCALE_N2274

RAILNSCALE

About the original: The Tatra 148 was built from 1969, although serial production emerged only in 1972. The vast majority of these lorries is equipped with six all wheel drive (6x6). The production of these off-road capable vehicles ended in 1982. The load bay and rear hatch are movable. This allows you to replicate the tilting. Please watch the video presentation of the Tatra 148: https://youtu.be/yonkXY2LQZ4

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

11.99 EUR^*

Art.-no. RAILNSCALE_N2778

RAILNSCALE

Enhance your layout with this moving day set. The SET contains a Volvo 245 and a man trying to move the sofa

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

9.99 EUR^*

Art.-no. RAILNSCALE_N3007

RAILNSCALE

Wallace fountains are public drinking fountains that appear in the form of small cast-iron sculptures scattered throughout the city of Paris and many other cities around the world. They are named after the Englishman Richard Wallace, who financed their construction. Dimensions: ø11.0 x 19.0 mm

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

7.99 EUR^*

Art.-no. RAILNSCALE_N3008

RAILNSCALE

Advertising columns were invented by the German printer Ernst Litfaß in 1854. In France, the columns are named Morris after Gabriel Morris, a printer, who held the concession for advertising in 1868. Dimensions: ø10.0 x 29.4 mm.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

12.99 EUR^*

Art.-no. RAILNSCALE_N3017

RAILNSCALE

Lifting jacks can be found on depots. The model is a replica of the lifting jacks standing at the depot Krøderbane in Norway. The set contains four jacks and two carriers.

This RAILNSCALE product was manufactured by DM-Toys in Germany in the usual RAILNSCALE quality.

The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The kits can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The best results are achieved with a primer before painting. Visit www.railnscale.com for building instructions and crafting tips.

All trademarks, all trade names, service marks and trademarks are the property of their respective owners and are used for information purposes only. The brands and trademarks on the models have only been reproduced to respect the historical truth and are not advertising. The intention is to provide a realistic depiction and not to specify a relationship with the trademark owner.

Download Anleitung/Instructions

179.90 EUR (RRP*)

129.99 EUR^*

Art.-no. Fleischmann_738807

Fleischmann

Electric locomotive Re 1426 of the Swedish State Railways SJ / Devision Green Cargo (SJ). Epoch VI.

Inscription and lettering true to the original model. In-plane mounted windows. Metal die-cast chassis. 5 pole motor with flywheel. Drive on four axles with two traction tyres. Interface according to NEM 662 (Next18) standards for the adaptation of a decoder. Coupler pocket according to NEM 355 standards with close coupling mechanism.
White and red triple LED headlights that change over with the direction of travel. The headlights can be partially or even entirely switched off with contact plates.

Prototype: Green Cargo (GC) is a railway company that has its focus on the goods transportation. The company has its roots in the Swedish state railway Statens Järnvägar (SJ) and was founded on January 1 2001 as a result of the EU rail liberalisation.

169.90 EUR (RRP*)

149.99 EUR^*

Art.-no. Fleischmann_733810

Fleischmann

Electric locomotive class 112 of the German Federal Railways (DB), epoch IV, in TEE color design.

Die-cast metal chassis. Engine with flywheel. Drive on 4 axles with 2 traction tires. Slotted close-coupling according to NEM 355. Interface according to NEM 651 for mounting a digital decoder.
Three-LED top lighting and red tail light, changing with the direction of travel.

The model is ideal for covering the TEE 22/23 "Van Beethoven" (item 881905).

254.90 EUR (RRP*)

199.99 EUR^*

Art.-no. Fleischmann_733890

Fleischmann

Electric locomotive class 112 of the German Federal Railways (DB), epoch IV, in TEE color design.

Model with built-in, load-controlled digital decoder, factory-fitted with prototypical sound.

Die-cast metal chassis. Engine with flywheel. Drive on 4 axles with 2 traction tires. Slotted close-coupling mount according to NEM 355.Hree-light LED headlight and red tail light, changing with the direction of travel.

The model is ideal for covering the TEE 22/23 "Van Beethoven" (item 881905), from 1972 to 1974.

The locomotive was built by Krauss-Maffei, Munich-Allach 1962, Fab.-Nr. 18926 and placed on 13.12.1962 as E 10 1267 in service.
First-Bw Heidelberg until 1968
1968-1974: Bw Frankfurt (M) 1
1974- 1979: Bw Dortmund
After 1979 relocated to Hamburg-Eidelstedt, Munich and Berlin-Rummelsburg
01.01.1968: New locomotive number 112 267-0
01.01.1991: Numbered 113 267-9
Last number. 91 80 6113 267-9 D-BYB
Today museum locomotive BEM Nördlingen

Coloring of the locomotive:
1962-1975: cobalt blue / beige
1975- 2001: purple / beige (like model)
2001- 2018: traffic red
from 2018: purple / beige (as museum locomotive) model represents the state second half of the 70s (BD Essen, Bw Dortmund), the locomotive belonged to the first series of creases E 10.12

174.90 EUR^*

Art.-no. Fleischmann_737811

Fleischmann

Electric locomotive, class 103.1, of the German Federal Railroad (DB), epoch IV.

Die-cast metal chassis. Motor with flywheel. Drive on 4 axles with 2 traction tires. Interface according to NEM 651 standards for accepting a digital decoder.

Triple LED headlights and red tail lights that change with the direction of travel. Link mechanism on both sides. Coupling pocket according to NEM 355 standards.

The model is an ideal locomotive for the replica of the EuroCity train EC 22/23 "Johann Strauss" from Wien Westbahnhof to Cologne (and back). The German class 103 electric locomotive also stayed in front of the wagon set on the Austrian Westbahn in the early 1990s.

The company number 103 242-4 chosen by Fleischmann was sold to Henschel & Sohn, Kassel in 1974 with factory no. 31,788 built. The locomotive belongs to the 2nd series with a longer driver's cab and was put into service on March 14, 1974. The first depot was Hamburg-Eidelstedt and the locomotive was always stationed in Hamburg until it was decommissioned on March 20th, 2000.

Owner:
1974-1993: DB
1993-1997: DB AG, traction division
1997-2000: DB AG, Travel & Tourism division

The model shows the state in the late 1980s, but the locomotive retained its TEE color scheme until it was decommissioned.

144.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Fleischmann_735303

Fleischmann

Electric locomotive 120 502-0, DB AG. Epoch VI.

Locomotive with a red and a grey pantograph!
The locomotive has two different running numbers – one on the side and the second one at the front of the locomotive
Triple headlights that change with the direction of travel

The locomotive hauls trains of the DB Systemtechnik such as measurement trains. The locomotive captivates with two different running numbers that can be found on the side and at the front of the locomotive. If necessary, the locomotive can also be used with regular long-distance trains.

24.40 EUR (RRP*)

19.99 EUR^*

Art.-no. Fleischmann_837305

Fleischmann

Sliding wall wagon, type Hbillns, private transport AG Aarau (Switzerland), epoch VI.

Design in elaborate multi-colored lettering.

Model faithfully painted and labeled. Coupling pocket according to NEM 355 with close-coupling link.

149.99 EUR^*

Art.-no. Kato_7074050

Kato

Model Features:

· Trafficable minimum radius: R150
· Trafficable slope: 5%
· External dimensions: approx. 103 x 19 x 24 mm
· Weight: approx. 79 g
· Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can be easily replaced with the Kato Glacier coupling (which can be seen on the photo)
· Locomotive without digital interface, optionally available with decoder from DH

149.99 EUR^*

Art.-no. Kato_7074052

Kato

Model Features:

· Trafficable minimum radius: R150
· Trafficable slope: 5%
· External dimensions: approx. 103 x 19 x 24 mm
· Weight: approx. 79 g
· Wheel diameter: 6.8 mm
· Front lighting in the direction of travel
· Standard NEM 356 is included and can be easily replaced with the Kato Glacier coupling (which can be seen on the photo)
· Locomotive without digital interface, optionally available with decoder from DH

14.99 EUR^*

Art.-no. modelpower_83132

modelpower

US Army Bay Window Caboose

14.99 EUR^*

Art.-no. modelpower_83493

modelpower

US Army 55' Cylindrical Hopper

14.99 EUR^*

Art.-no. modelpower_83715

modelpower

US Army 40' Box Car

14.99 EUR^*

Art.-no. modelpower_83759

modelpower

US Army 40' Chemical Tank Car

14.99 EUR^*

Art.-no. modelpower_84055

modelpower

US Army 50' Flat w/Containers

6.70 EUR^*

Art.-no. Peco_SL-300F

Peco

Peco Finescale Track Code 55 with a profile height of only 1.39 mm

28.49 EUR^*

Art.-no. Preiser_79000

Preiser

unpainted figures, kit, material color white

13.49 EUR^*

Art.-no. Preiser_79224

Preiser

Set with 6 individual miniature figures made of plastic, carefully hand-painted.

14.53 EUR^*

Art.-no. Preiser_79230

Preiser

Set with 6 individual miniature figures made of plastic, carefully hand-painted.

3.00 EUR^*

Art.-no. Hobbytrain_Katalog-2019

Hobbytrain

86-page catalog of the brands Hobbytrain, Kato / Lemke, Mehano, LS Models, RailAd, Sudexpress, Jägerndorfer Collection and Pirata

3.00 EUR^*

Art.-no. Jaegerndorfer_Katalog-2019

Jägerndorfer

40-page catalog of the brand Jägerndorfer Collection

37.99 EUR^*

Art.-no. Busch_1010

Busch

Kit with interesting flashing and lighting effects, as well as 4 aliens and a robot. The UFO can optionally be assembled standing with extended telescopic legs or on a »Beam Beam flying«. Four differently colored incandescent lamps, optical fibers and electronic circuitry provide attractive lighting effects (the electronics are ready to install for connection to 14-16 V DC or AC voltage).

Diameter of the UFO: 150 mm, approx. 45 mm high (including dome), total height with telescopic legs approx. 75 mm.

What is a UFO?
UFO (Ufo) [Abbr. for engl. unidentified flying object "unidentified flying object"], designation for those observed in various areas of the world again and again, many plate-shaped ("flying saucers"), often brightly lit and moving ("flying") objects of unknown nature and origin; often opt. Deceptions.

Are there UFOs? Are there extraterrestrials?
For the past 50 years, many thousands of people have sighted and claimed to have seen extraterrestrial flying objects. Some people even claim that they were kidnapped and taken on board by a UFO. Everything just fantasy, imagination or lies?

Still mysterious: The Roswell case
Probably the most famous and controversial case in UFO history is the alleged crash of a spaceship near Roswell, New Mexico. A farmer found pieces of wreckage from an unknown metal foil, which could be crumpled at will and, after a short time, returned to its original form by itself. In addition, the bodies of supposed aliens (aliens) were discovered. The case caused a stir in public at that time. All wreckage and body parts were seized within a very short time by the American military. It was later claimed that the parts found were the remains of a weather balloon and the corpses were dummy dummies to study the consequences of a high-altitude impact. Mysterious, however, remains until today, why the military ordered airtight lockable Kindersärge for the removal of the dolls at the local funeral institute.

Area51 - an UFO cover?
Area51, sometimes referred to as Dreamland, is a piece of desert (the size of Switzerland) in the middle of Nevada. It was built as a secret air force base in 1954. It was not until 1994 that the US Air Force officially announced that it exists. Until today, everything that happens there is "Top Secret" and it must not be entered. It is used, among other things, for nuclear tests and for the development of new aircraft. Supposedly there are also UFOs examined and extraterrestrial dissected. As monstrous as it may sound, President Eisenhower is said to have given aliens permission to inspect people. In return, the US government received permission to explore the advanced technology of the aliens. Results of the research could be eg the stealth bombers. Who knows?

5.69 EUR^*

Art.-no. Busch_1341

Busch

»Groundcover« Grass strips (sheet size 148 x 105 mm) on ultra-thin, flexible carrier foil. Therefore, the stripes adapt perfectly to uneven floors. Simplest processing: Remove the grass strips from the package and glue them onto the substrate with all-purpose or model-building adhesives (eg Busch 7593, 7598, 7599 or similar).

The grass strips are also very good to represent small tufts. To do this, simply separate the required amount from the grass strips (cut off or even pick up for irregular edges). The grass strips are very productive and are sufficient for a large number of small tufts. Suitable for all gauges.

The professional method for realistic floor design.

5.69 EUR^*

Art.-no. Busch_1342

Busch

»Groundcover« Grass strips (sheet size 148 x 105 mm) on ultra-thin, flexible carrier foil. Therefore, the stripes adapt perfectly to uneven floors. Simplest processing: Remove the grass strips from the package and glue them onto the substrate with all-purpose or model-building adhesives (eg Busch 7593, 7598, 7599 or similar).

The grass strips are also very good to represent small tufts. To do this, simply separate the required amount from the grass strips (cut off or even pick up for irregular edges). The grass strips are very productive and are sufficient for a large number of small tufts. Suitable for all gauges.

The professional method for realistic floor design.

5.69 EUR^*

Art.-no. Busch_1343

Busch

»Groundcover« Grass strips (sheet size 148 x 105 mm) on ultra-thin, flexible carrier foil. Therefore, the stripes adapt perfectly to uneven floors. Simplest processing: Remove the grass strips from the package and glue them onto the substrate with all-purpose or model-building adhesives (eg Busch 7593, 7598, 7599 or similar).

The grass strips are also very good to represent small tufts. To do this, simply separate the required amount from the grass strips (cut off or even pick up for irregular edges). The grass strips are very productive and are sufficient for a large number of small tufts. Suitable for all gauges.

The professional method for realistic floor design.

122.55 EUR^*

Art.-no. Busch_5770

Busch

16 noises - 7 outputs - 7 light programs - 4 inputs for track contacts - Programmable - Digital compatible

Imagine the following scenario: A train approaches a railroad crossing. The horn of a diesel loco sounds. Then the chime works at the railroad crossing and the hazard warning lights flash. You can hear the train passing by. In the distance you can hear the chimes of a town hall and the barrel organ of a street musician. The train is over - the chime stops and the hazard lights stop flashing. It gets quiet - only in the distance you can hear different traffic sounds.

And the effort for this scenario? Very low. All you need is the Realistic Sound "Universal" 5770, two warning lights (no gear) and a track contact. If the track contact is run over, the horn of the diesel locomotive is triggered first and then the chime. The hazard warning lights are connected directly to the Realistic Sound module and controlled from there with the appropriate flashing frequency. The other noises can be triggered, for example, by the random generators integrated in the sound module. With additional inputs, sounds and outputs available, additional soundscapes and control functions can be programmed and called up by moving trains.

5770 Realistic Sound »UNIVERSAL« Train & City
16 sounds: Two different station announcements, moving train, train brakes, steam whistle, bell, horn (diesel locomotive), chime (railway crossing), church bells, town hall carillon, street musician, market crier, siren (fire alarm), siren, traffic and building site noise. 7 light programs: flashing lights, railroad crossing, city lights, billboard, traffic lights, blue lights, flares, construction site lightning. Delivery ready for use including 2 Lausprecherboxen.

Technical information:
Each Realistic Sound »UNIVERSAL« contains 16 different sounds. The sounds can be assigned to the two speakers as desired (stereo playback, loudspeakers freely placeable). A maximum of 4 sounds are available at the same time (2 per speaker). The sounds and functions are triggered by the buttons in the sound module, via the digital system keyboard, by 4 integrated random generators or via 4 contact inputs (direct connection of track or reed contacts etc. to the Realistic Sound). The modules also have 7 outputs for connecting incandescent lamps, etc. The 7 outputs can be switched on and off via keyboard or controlled by assignment to a sound or via the pre-programmed lighting programs.

Programming (via built-in keyboard): Sound Sequence: Each sound can be assigned a second sound, which will be played as soon as the first sound is finished. Sound speaker assignment (left, right or both speakers). Playback mode: Continuous sound (1. button press switches sound on, 2. button press again) or single or multiple run (by pressing the button the sound is played up to 15 times depending on the pre-programming and then ends automatically). Assignment Inputs: Selection of which sound should be triggered when switching a contact input. Assignment Outputs: Selection, which output should be switched on or which light program should run as long as a certain sound is triggered. Reset function: Resetting all programming to the factory settings. All programming remains permanently stored even without power supply. The sound module is prepared to be able to subsequently update the operating program and sounds.

Digital programming: The programming takes place via the usual registers and CV's in the digital system. In addition to the manually programmable functions, the following values can be changed: address, time base for the light programs / random number generator, sound code for sound update, decoder recognition for software update etc.

Specifications: 12-16V (AC), 14-22V (DC and digital). Digital data reception: NMRA-DCC, Märklin®. 2 sound outputs for speakers 8 ohms / 0.5 W (included). Connection via 3.5 mm jack plug, alternatively the connection of active loudspeaker boxes, stereo system, headphones etc. is possible. Separate volume control for both outputs. 7 light outputs 12-20 V (depending on input voltage) 300 mA per output, max. 1.0 A total (for connecting lamps etc.). 4 contact inputs 5-16 V or potential-free switch (to trigger the sounds of moving trains).

More information, instructions and sounds to listen to can be found on the Internet at www.busch-model.com.

122.55 EUR^*

Art.-no. Busch_5771

Busch

16 noises - 7 outputs - 7 light programs - 4 inputs for track contacts - Programmable - Digital compatible

16 sounds: Tractor (starting + driving sound + engine stop), dog barking, cows, sheep, rooster with chickens, brook noise with Grillenzirpen, Vogelgezwitscher, bell ringing (church), hour beat (church), church organ, traffic accident, siren, storm, ghost castle, Fahrender Diesel train, train whistle. 7 light programs such as flashing lights, ghost castle illumination, city lights, blue lights, etc. Delivery ready for use including 2 loudspeaker boxes.

Technical information:
Each Realistic Sound »UNIVERSAL« contains 16 different sounds. The sounds can be assigned to the two speakers as desired (stereo playback, loudspeakers freely placeable). A maximum of 4 sounds are available at the same time (2 per speaker). The sounds and functions are triggered by the buttons in the sound module, via the digital system keyboard, by 4 integrated random generators or via 4 contact inputs (direct connection of track or reed contacts etc. to the Realistic Sound). The modules also have 7 outputs for connecting incandescent lamps, etc. The 7 outputs can be switched on and off via keyboard or controlled by assignment to a sound or via the pre-programmed lighting programs.

Programming (via built-in keyboard): Sound Sequence: Each sound can be assigned a second sound, which will be played as soon as the first sound is finished. Sound speaker assignment (left, right or both speakers). Playback mode: Continuous sound (1. button press switches sound on, 2. button press again) or single or multiple run (by pressing the button the sound is played up to 15 times depending on the pre-programming and then ends automatically). Assignment Inputs: Selection of which sound should be triggered when switching a contact input. Assignment Outputs: Selection, which output should be switched on or which light program should run as long as a certain sound is triggered. Reset function: Resetting all programming to the factory settings. All programming remains permanently stored even without power supply. The sound module is prepared to be able to subsequently update the operating program and sounds.

Digital programming: The programming takes place via the usual registers and CV's in the digital system. In addition to the manually programmable functions, the following values can be changed: address, time base for the light programs / random number generator, sound code for sound update, decoder recognition for software update etc.

Specifications: 12-16V (AC), 14-22V (DC and digital). Digital data reception: NMRA-DCC, Märklin®. 2 sound outputs for speakers 8 ohms / 0.5 W (included). Connection via 3.5 mm jack plug, alternatively the connection of active loudspeaker boxes, stereo system, headphones etc. is possible. Separate volume control for both outputs. 7 light outputs 12-20 V (depending on input voltage) 300 mA per output, max. 1.0 A total (for connecting lamps etc.). 4 contact inputs 5-16 V or potential-free switch (to trigger the sounds of moving trains).

More information, instructions and sounds to listen to can be found on the Internet at www.busch-model.com.

73.62 EUR^*

Art.-no. Busch_5780

Busch

With 12 sounds: steam whistle, bell, horn, railroad crossing, gong and announcement (High German), route telephone, red signal, tram lines, whistle and Swabian announcement, Saxon announcement, Austrian announcement and Swiss announcement.

The new version of the well-known Busch Realistic Sound Noise Modules: Even better sound - even more noise - now also digitally controllable!

The new Realistic Sound modules each store 12 different sounds. Seven sounds can be recalled either via push buttons, switches, relays or reed contacts (magnetic pulse switch) or via a random circuit. Alternatively, all sounds can also be digitally selected (DCC). A powerful external speaker is included. With digital control, there are many additional programming options.

Technical specifications:
Power supply: 12-22 V = / 12-16 V ~
Current consumption: max. 700 mA
Inputs: 7 pieces
Output power: max. 3 W (8 ohm speaker)

73.62 EUR^*

Art.-no. Busch_5781

Busch

With 12 noises: ring a village church, town church, free-swinging bell, wedding march (organ), glockenspiel, hour strike, fanfare, village church 2, cathedral bells, Glockenspiel 2, Ave Maria (organ), bell.

The new version of the well-known Busch Realistic Sound Noise Modules: Even better sound - even more noise - now also digitally controllable!

The new Realistic Sound modules each store 12 different sounds. Seven sounds can be recalled either via push buttons, switches, relays or reed contacts (magnetic pulse switch) or via a random circuit. Alternatively, all sounds can also be digitally selected (DCC). A powerful external speaker is included. With digital control, there are many additional programming options.

Technical specifications:
Power supply: 12-22 V = / 12-16 V ~
Current consumption: max. 700 mA
Inputs: 7 pieces
Output power: max. 3 W (8 ohm speaker)

73.62 EUR^*

Art.-no. Busch_5783

Busch

With 12 sounds: sheep, cows, pigs, chickens, dogs, donkeys, new and old tractors, peasants, ducks and geese, various nature sounds (stream, birds, frog, etc.)

The new version of the well-known Busch Realistic Sound Noise Modules: Even better sound - even more noise - now also digitally controllable!

The new Realistic Sound modules each store 12 different sounds. Seven sounds can be recalled either via push buttons, switches, relays or reed contacts (magnetic pulse switch) or via a random circuit. Alternatively, all sounds can also be digitally selected (DCC). A powerful external speaker is included. With digital control, there are many additional programming options.

Technical specifications:
Power supply: 12-22 V = / 12-16 V ~
Current consumption: max. 700 mA
Inputs: 7 pieces
Output power: max. 3 W (8 ohm speaker)

7.12 EUR^*

Art.-no. Busch_5998

Busch

For the lighting of houses and vehicles. Ready for connection to 14-16 V DC or AC voltage. Compact design (24 x 8 mm) for universal use. Each light strip has 3 warm white LEDs. Easy to attach with self-adhesive film on the back.

3.79 EUR^*

Art.-no. Busch_6100

Busch

dark green, about 55 mm high

12.34 EUR^*

Art.-no. Busch_6464

Busch

With colorful balls in gold, blue, red and green. Height each: 40 mm.

15.19 EUR^*

Art.-no. Busch_6469

Busch

Pine fir with fine needle block, 15 pieces (about 40-90 mm high).

11.87 EUR^*

Art.-no. Busch_7050

Busch

Compilation of the most common litter materials for greening: Scattering powder dark green, may green, medium green and flower meadow.

Content: about 4 x 40 g.

6.64 EUR^*

Art.-no. Busch_7171

Busch

500 g of snow powder. Easy to work with. For a thin layer of snow cover the surface with white glue and sprinkle snow powder over it. For snow piles and snow hills, the snow powder is mixed with water and processed like off-site mortar.

The glittering snow can also be used for "snowing in" rooftops, walls, etc., and for modeling icicles and snow overhangs.

Suitable for all gauges.

6.64 EUR^*

Art.-no. Busch_7192

Busch

Content: stone gray, 500 g. High-quality cellulose putty with plastic additive, therefore also suitable for fine modeling. The land-based mortar remains workable for approx. 30 minutes after mixing. It does not shrink, does not warp, adheres to all substrate materials and can be treated like wood after drying.

10.44 EUR^*

Art.-no. Busch_7193

Busch

The proven Busch Landscaping mortar is now available in a large package in a new, particularly natural, sand-brown color. The high-quality cellulose putty has a plastic additive, so that it is also suitable for fine modeling. The land-based mortar remains workable for approx. 30 minutes after mixing. It does not shrink, does not warp, adheres to all substrate materials and can be treated like wood after drying. Content: 1000 gr., Sandy brown.

9.97 EUR^*

Art.-no. Busch_7194

Busch

The special modeling fabric for hardening larger surfaces. Two layers on top of each other turn a labile ground into a self-supporting terrain section. The ideal quick-build method, for example, in conjunction with wire mesh 7179 or terrain crepe 7174. Size: 200 x 20 cm.

6.64 EUR^*

Art.-no. Busch_7195

Busch

Content: Brown, 500 g. High-quality cellulose putty with plastic additive, therefore also suitable for fine modeling. The land-based mortar remains workable for approx. 30 minutes after mixing. It does not shrink, does not warp, adheres to all substrate materials and can be treated like wood after drying.

16.99 EUR^*

Art.-no. Busch_7202

Busch

Practical materials for model making, home office and creative crafts. Perfect for processing kits such as Busch's Natur Pur series. The two different blade shapes allow the separation of fine plastic parts from the injection branch as well as the exact cutting of paper, for example, with cut-out sheets.

The 9-piece set includes:
- Cutting mat
- super light, handy and stable
- Protects the work surface from cuts and protects the blades of the scalpel
- Also suitable as a mouse pad
- with grid for exact application. Division in centimeters, marking of different angles as well as DIN A5 and A6 format
- Environmentally friendly made of 100% recycled polypropylene
- Size 30 x 22 cm
- Non-slip cutting ruler made of aluminum, 30 cm
- Scalpel made of aluminum, with protective cap
- 3 blades each for paper (pointed shape) and plastic (rounded shape)

11.39 EUR^*

Art.-no. Busch_7320

Busch

Extra fine-grained micro-foam flakes in color-coordinated shades of green. Suitable for the foliage of bushes and trees.

6.93 EUR^*

Art.-no. Busch_7404

Busch

Size: 280 x 140 mm, 1.2 mm thick. Embossed surface, flexible and self-adhesive. Ideal for the design of the visible area of tunnel entrances.

5.69 EUR^*

Art.-no. Busch_7555

Busch

Very well suited to the rapid formation of snowdrifts and snowdrifts. Can be "refined" on the surface in addition with bush 7170 snow powder, 7171 glittering snow and 7172 crystal snow paste.

The Busch Modeling Putty is ready to mix and ready to use. It is easy to mold and cures in 24 hours. On the even in the cured state still slightly elastic plasticine can now be applied the paint or spreading material can be glued. A slightly hardened mass can be made elastic again by adding water. Ideal applications z. B .:

For the planting of planters, flowerpots, etc .: Simply »Pure Nature« Plant from bush into the still soft mass plug in, done!
The mass can be filled very well and combined with other materials such as wood.
In the design of paths and dirt roads, lanes can be represented in three dimensions by rolling with the wheels of a vehicle through the still soft mass. After curing, the tire tracks are permanently preserved.
Perfect for modeling small details such as cactus and piles of sand.
Suitable for many repairs.
In addition to model railroad and diorama construction, the modeling clay of Busch is also very well suited as a decorative item for the domestic area.
Content: 90 g.

5.69 EUR^*

Art.-no. Busch_7556

Busch

Very well suited to the rapid formation of snowdrifts and snowdrifts. Can be "refined" on the surface in addition with bush 7170 snow powder, 7171 glittering snow and 7172 crystal snow paste.

The Busch Modeling Putty is ready to mix and ready to use. It is easy to mold and cures in 24 hours. On the even in the cured state still slightly elastic plasticine can now be applied the paint or spreading material can be glued. A slightly hardened mass can be made elastic again by adding water. Ideal applications z. B .:

For the planting of planters, flowerpots, etc .: Simply »Pure Nature« Plant from bush into the still soft mass plug in, done!
The mass can be filled very well and combined with other materials such as wood.
In the design of paths and dirt roads, lanes can be represented in three dimensions by rolling with the wheels of a vehicle through the still soft mass. After curing, the tire tracks are permanently preserved.
Perfect for modeling small details such as cactus and piles of sand.
Suitable for many repairs.
In addition to model railroad and diorama construction, the modeling clay of Busch is also very well suited as a decorative item for the domestic area.
Content: 90 g.

5.99 EUR^*

Art.-no. Busch_7557

Busch

Very well suited to the rapid formation of snowdrifts and snowdrifts. Can be "refined" on the surface in addition with bush 7170 snow powder, 7171 glittering snow and 7172 crystal snow paste.

The Busch Modeling Putty is ready to mix and ready to use. It is easy to mold and cures in 24 hours. On the even in the cured state still slightly elastic plasticine can now be applied the paint or spreading material can be glued. A slightly hardened mass can be made elastic again by adding water. Ideal applications z. B .:

For the planting of planters, flowerpots, etc .: Simply »Pure Nature« Plant from bush into the still soft mass plug in, done!
The mass can be filled very well and combined with other materials such as wood.
In the design of paths and dirt roads, lanes can be represented in three dimensions by rolling with the wheels of a vehicle through the still soft mass. After curing, the tire tracks are permanently preserved.
Perfect for modeling small details such as cactus and piles of sand.
Suitable for many repairs.
In addition to model railroad and diorama construction, the modeling clay of Busch is also very well suited as a decorative item for the domestic area.
Content: 90 g.