N-Scale 03/2019: Fleischmann, Arnold, Modellbahn Union

14.99 EUR^*

Art.-no. MU_N-A00130

Modellbahn Union

The BÜ signal (type 1958) has two signal levels. The lower light is orange and always on. The upper one is white and flashes when the level crossing is safe and the train is allowed to continue. In the prototype this signal is set up on both sides of the railroad crossing.

You can make the lenses with the help of Kristal Klear. The kit includes the signal produced in the 3D printing process,
2 wired LEDs, resistors, protection diodes, a printed mast shield and a construction manual.

Dimensions: 4.5 x 7.5 x 33.7mm

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color)
At Youtube there is a video with the working signal.

24.99 EUR^*

Art.-no. MU_N-B00087

Modellbahn Union

Thale command station 2 - B2 The route Halberstadt - Thale was opened in 1862, as an extension of the Magdeburg-Halberstädter railway.Just one day after the official opening, the scheduled passenger traffic began with four train pairs per day.This building with the distinctive half-timbering was built in 1897.As a jewel, the signal box in Thale stands out impressively between the city center and the train station."

12.99 EUR^*

Art.-no. MU_N-L00094

Modellbahn Union

drive-through height 28mm

9.99 EUR^*

Art.-no. MU_N-L00092

Modellbahn Union

59.99 EUR^*

Art.-no. MU_N-M00453

Modellbahn Union

The heavy goods vehicles (SLT) Elefant, Franziska and Mammut are military special developments of the Bundeswehr and are used in the repair, transport and logistics battalions of the divisions and corps as well as the armed forces base. The heavy goods vehicle "Elefant" is one of the second generation vehicles. The tractor unit 50-2 is powered by a water-cooled Mercedes-Benz diesel engine located behind the cab. The power is distributed over a converter transmission on all four axles, the first two are designed as steering axle. The semi-trailer with a total payload of 52 t has a loading area of 7800 × 3150 mm; Its height can be hydraulically adjusted by + 100 / -80 mm. The hydraulic-mechanical control of the four axles depends on the bending angle between tractor and semitrailer and takes place via the so-called "sliding block" of the semitrailer.

The highly detailed, unpainted kit was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

At Wikipedia there is a detailed documentation of the role model.

29.99 EUR^*

Art.-no. MU_N-M00450

Modellbahn Union

The Faun L 912/21 is a military truck of the German commercial vehicle manufacturer Faun and belonged to the 2nd generation of the wheeled vehicles of the Bundeswehr. 8,000 vehicles of this type were delivered to the Bundeswehr.

The highly detailed, unpainted kit was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

29.99 EUR^*

Art.-no. MU_N-M00451

Modellbahn Union

The Bergepanzer 1 (original type designation of the US Army: M88 Recovery Vehicle) was the second armored recovery vehicle of the Bundeswehr. He had the task of recovering damaged equipment and tow it for repair, as well as in the installation and removal of engines or the like. To perform crane work. He was the successor of the Bergepanzer M 74, which was designed on the basis of Sherman tank, the requirements for the introduction of the main battle tank M48 was no longer able to cope.

The highly detailed, unpainted kit was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

At Wikipedia there is a detailed documentation of the role model.

29.99 EUR^*

Art.-no. MU_N-M00452

Modellbahn Union

The M109 is a 155 mm caliber howitzer from US production. Their development began during the Cold War in the 1950s. Since 1962 it became part of the artillery associations of many states and standard NATO howitzer. Until its replacement by the Panzerhaubitze 2000 in 2007, the M109 was also in the Army of the Bundeswehr in use. Since its commissioning the M109 experienced a multiplicity of combat value increases. The M109A6 Paladin version is still the backbone of US Army artillery. Technically speaking, she has nothing in common with the original variant except for the tub. With a total of over 5,000 copies produced, the M109 is one of the most produced howitzer worldwide.

The highly detailed, unpainted kit was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons.

At Wikipedia there is a detailed documentation of the role model.

179.90 EUR^*

Art.-no. Fleischmann_708603

Fleischmann

Steam locomotive class 86 of the German Federal Railways, epoch III.

Prototypically painted and labeled. Used windows. Mobile Heusinger control. Brake pads between the wheels. Die-cast metal chassis. Engine with flywheel. Drive on 4 axes. 2 traction tires. The triple headlights lighting. Coupler pocket according to NEM 355.

The new Fleischmann locomotive was put into service as 86 432. The model is in the state of the early 60s held, the inscription BD Kassel, Bw Kassel. It was built in 1941 near Florisdorf, Vienna, Fab. 9460.
The first bw was Kempten, RBD Augsburg. The further stations of the locomotive:
1941-1949 Bw Kempten
1949-1953 Bw Buchloe
1953-1960 Bw Simbach (Inn)
1960-1966 Bw Kassel
z 01.10.1966
Retired 22.05.1967

219.90 EUR^*

Art.-no. Fleischmann_708683

Fleischmann

Steam locomotive class 86 of the German Federal Railways, epoch III.

Model with pre-installed DCC decoder. Light change in digital mode.

Prototypically painted and labeled. Used windows. Mobile Heusinger control. Brake pads between the wheels. Die-cast metal chassis. Engine with flywheel. Drive on 4 axes. 2 traction tires. Three-light top lighting in front, changing with the direction of travel. Coupler pocket according to NEM 355.

259.90 EUR^*

Art.-no. Fleischmann_737891

Fleischmann

Electric locomotive, class 103.1, of the German Federal Railways (DB), epoch IV.

Model with built-in, load-controlled digital decoder and factory-ready sound. Die-cast metal chassis. Engine with flywheel. Drive on 4 axles with 2 traction tires.

Three-LED top lighting and red tail light, changing with the direction of travel. With engine room lighting. Sliding mechanism on both sides. Coupler holder NEM 355.

The model is an ideal train locomotive for the replica of the EuroCity train EC 22/23 "Johann Strauss" from Vienna West Station to Cologne (back). The German electric locomotive class 103 remained in the early 1990s on the Austrian Westbahn in front of the car set.

189.90 EUR^*

Art.-no. Fleischmann_739306

Fleischmann

Electric locomotive class 193 of the CD, epoch VI.

- Finely detailed model with four pantographs
- The headlight can be completely or partially turned off by means of a microswitch

5-pole motor with flywheel. Drive on all four axles with two traction tires. Interface to NEM 662 (Next18) for recording a decoder. Coupler pocket according to NEM 355 with link mechanism. White / red LED three-light top lighting, changing with the direction of travel.

Prototype: Since May 8, 2018, CD-Vectron locomotives have reached the capital city of Berlin and the Hanseatic city of Hamburg in front of EuroCity trains from Prague. Operationally has great advantages, because a complex change of locomotive is now eliminated. Kiel is even approached with the EC "Porta Bohemica". The total number of machines is ten units rented via ELL. Eight locomotives and a reserve vehicle have been planned for EC services since the spring of 2018. The tenth machine is in use in Czech between Prague and Ústí nad Labem.

39.90 EUR^*

Art.-no. Fleischmann_827008

Fleischmann

Eight-axle low-floor wagon for truck and semitrailer transports of HUPAC, epoch V.

This car serves as a start or end car and is equipped with 2 removable automatic couplings (a low-floor coupling to the intermediate cars is attached). Both sides removable buffer planks and automatic couplings.

Block train suitable

39.90 EUR^*

Art.-no. Fleischmann_827107

Fleischmann

Eight-axle low-floor wagon for truck and semitrailer transports of HUPAC, epoch V.

This car serves as an intermediate car. One side of the wagon is equipped with a low-floor coupling. Double-sided mounting option for buffer boards and automatic couplings. Block train suitable. Car number other than Art. 827108.

39.90 EUR^*

Art.-no. Fleischmann_827108

Fleischmann

Eight-axle low-floor wagon for truck and semitrailer transports of HUPAC, epoch V.

This car serves as an intermediate car. One side of the wagon is equipped with a low-floor coupling. Double-sided mounting option for buffer boards and automatic couplings. Block train suitable. Car number other than Art. 827107.

21.90 EUR (RRP*)

12.99 EUR^*

Art.-no. Fleischmann_832601

Fleischmann

Beer wagon of the brewery "Kronenbourg", hired by the SNCF, epoch III - IV.

Model with NEM 355 coupler pocket and KK kinematics.

Prototype: Kronenbourg is the largest French brewery. It has its seat in the Strasbourg district of Cronenbourg, which is also the namesake of the company. Brewing is now in Obernai in Alsace.

24.90 EUR^*

Art.-no. Fleischmann_852706

Fleischmann

Self unloading wagons, type Faalns, employed at the ÖBB, epoch V.

Beginners Program:

Prototypically labeled and painted. With cargo.

The Faalns type of propulsion differs from its predecessor, the Faals150, in a much larger body, a 70-m³ cargo capacity, hydraulic flap actuation and newly developed bogies.

89.90 EUR^*

Art.-no. Fleischmann_841201

Fleischmann

Three-piece tank wagon set "BP", used by the German Federal Railways (DB), epoch IV.

The models have different ordinal numbers and have individual signs of age and wear.

Models with NEM 355 coupler pocket and KK kinematics.

89.90 EUR (RRP*)

55.55 EUR^*

Art.-no. Fleischmann_841202

Fleischmann

Three-piece tank car set "BP", used by the Deutsche Bundesbahn.

The models carry different ordinal numbers

216.60 EUR^*

Art.-no. Piko_40424

Piko

Shape variant of the diesel locomotive Rh 2400 in gray-yellow livery with all-round lights and 3rd headlight in Ep. IV version. The PIKO model of the series 2400 of the NS impresses with the finest case engraving and the meticulous implementation of its prototype with exact engravings on the locomotive body and the bogies. The railings, which are very characteristic of this series, are elaborately etched metal parts. The model is characterized by excellent handling characteristics and has a precision manufactured die-cast frame, a powerful motor with flywheel and a lighting by LEDs with white / red light. The model is prepared for digital operation.

299.99 EUR^*

Art.-no. Piko_40425

Piko

Shape variant of the diesel locomotive Rh 2400 in gray-yellow livery with all-round lights and 3rd headlight in Ep. IV version. The PIKO model of the series 2400 of the NS impresses with the finest case engraving and the meticulous implementation of its prototype with exact engravings on the locomotive body and the bogies. The railings, which are very characteristic of this series, are elaborately etched metal parts. The model is characterized by excellent handling characteristics and has a precision manufactured die-cast frame, a powerful motor with flywheel and a lighting by LEDs with white / red light. The model is prepared for digital operation. With the factory-installed sound decoder, which masters the data formats DCC with RailComPlus®, Motorola® and Selectrix®, the Rh 2400's electric locomotive once again achieved an outstanding implementation as a sound locomotive. The powerful loudspeaker is tuned to the RH 2400 and allows a powerful sound. Many local sounds and functions are available individually. Sound is also possible in analog mode - only driving sound.

139.41 EUR^*

Art.-no. Hobbytrain_H2934

Hobbytrain

Diesel locomotive Vossloh Am843 SBB Infra, Ep.V

The heavy-duty Vossloh G1700 shunting and long-distance diesel locomotive is used by numerous national and international railways for national and international freight transport. Detailed reproduction of the design differences of the German and Swiss versions. Fan grille designed as Ätzteile, freestanding lamps with red-white or Swiss light change. Tail light can be switched off manually.
Prepared for the installation of a sound decoder.

Model Features:
- 2 flywheels / bell anchor engine)
- Decoder Interface Next 18 (NEM662)
- Driven axles 4
- Current collection all axes
- Traction tires 2
- Swiss light change white / white (can be switched off manually) including shunting light
- NEM clutch
- LÜP 95 mm

168.21 EUR^*

Art.-no. Arnold_HN4270

Arnold

RENFE, Talgo III, 6 pieces. Basic set, Ep. IV

54.81 EUR^*

Art.-no. Arnold_HN4271

Arnold

RENFE, Talgo III, 2 parts. Set intermediate cars 1st and 2nd class, Ep. IV

168.21 EUR^*

Art.-no. Arnold_HN4272

Arnold

RENFE, Trenhotel Talgo, 6 parts. Basic set in original blue-beige color, Ep. IV

54.81 EUR^*

Art.-no. Arnold_HN4273

Arnold

RENFE, Trenhotel Talgo, 2 parts. Set of sleeping cars in original blue-beige livery, Ep. IV

54.81 EUR^*

Art.-no. Arnold_HN4274

Arnold

RENFE, Trenhotel Talgo, 2 parts. Set of sleeping cars in original blue-beige livery, Ep. IV

9.99 EUR^*

Art.-no. Microscale_MI-1

Microscale

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils in new paint and converts the adhesive on the back of the decal to a stronger and longer lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin or Gloss.

9.99 EUR^*

Art.-no. Microscale_MI-2

Microscale

Mirco Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, comforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so a not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases, but if necessary, a second application of Micro Sol can be helpful.

9.99 EUR^*

Art.-no. Microscale_MI-9

Microscale

Micro Kristal Klear is the insider tip in model making - no other product achieves such a big difference in the appearance of your models.

Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear

In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.

Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.

In our blog you will find an interesting video about how Micro Kristal Klear works !