N-Scale 01/2019: Modellbahn Union
Dear customer,
here our novelties and bargains:
|
29.99 EUR*
Art.-no. MU_N-A00158
Modellbahn Union
KS multi-section signals are main signals which also have a pre-signal function. They usually have signal lamps arranged in a triangle, with red in the top center, green left and yellow right horizontally next to each other under the red signal lamp. Our signal comes as a ready-made model and has a foot with a diameter of 3mm. Resistors are already soldered and the LEDs have a common positive pole.
|
|
14.99 EUR*
Art.-no. MU_N-M00400
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. The tower of the tank is rotatable.
The Saurer (SPz A1 in the Austrian army) is an armored infantry fighting vehicle, which was developed by the Austrian Saurerwerke and produced by this company after the takeover by Steyr Daimler Puch. At Wikipedia there is a detailed documentation of the role model. |
|
19.99 EUR*
Art.-no. MU_N-M00401
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. The tower of the tank is rotatable.
The M47 Patton was a battle tank of the Cold War era from American production. The official designation of the Army Department was: "M47 Medium Tank - 90 mm Gun. The vehicle was named after General George S. Patton, the commander of the 3rd US Army during the Second World War. In the US Army, the M47 used only in small numbers were replaced by the M48 and M48A1. The Bundeswehr introduced the successor model M48A2C, the Austrian army armored a few years later to the main battle tank M60. At the beginning of the Bosnian war in 1992, the M47 was still occasionally used by the Bosnian-Herzegovinian armed forces, today, the tank is no longer used. At Wikipedia there is a detailed documentation of the role model. |
|
9.99 EUR*
Art.-no. MU_N-M00130
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. A matching decal sheet is under the item no. MU_N-M00100 available.
|
|
239.90 EUR
(RRP*)
199.99 EUR*
Art.-no. Fleischmann_718203
Fleischmann
Steam locomotive class 50 of the DB (Deutschen Bundesbahn), epoch III.
Special: with cabin tender In true to the original livery and lettering. In-plane applied windows. Furnished driver's cab. Unobstructed view between boiler and chassis true to the original. Fully moveable Heusinger control. Brake shoes between the wheels. Metal die-cast chassis. Motor with flywheel. Drive on 8 wheels in the tender, four of them have traction tyres. Triple headlights on both ends of the locomotive. Locomotive-tender-close coupling. Automatic couplers on both ends of the locomotive. The variants of the Class 50 seem to be countless. The variant with four domes, running metal boards and skirt, Witte smoke deflectors and cab tender is particularly interesting. Typical for the epoch III locomotive is the partially aluminum-coloured lettering with DB-emblem.Until 1962, almost 800 Swiss tenders of the Class 50 (050) were fitted with a driver‘s cab to save cabooses. The cabin was placed in the middle of the tender, so the water box was extended to the rear beyond the buffer beams. Locomotive has no NEM plug, but we offer this loco also with decoder for DCC or Selectrix. We solder in the decoder manually. Of course 2 years warranty on loco and decoder are included. |
|
279.90 EUR*
Art.-no. Fleischmann_718283
Fleischmann
Steam locomotive, class 50, of the German Federal Railways (DB), epoch III.
Special feature: locomotive with cabin tender. The model is factory fitted with a DCC decoder for digital operation. Prototypically painted and labeled. Used windows. Cab interiors. Prototypical view between boiler and chassis. Mobile Heusinger control. Brake pads between the wheels. Die-cast metal chassis. Engine with flywheel. Drive in the tender on 8 wheels, 4 of them with traction tires. Three-light top lighting alternating with the direction of travel on both sides. Lok Tender close coupling. Prototype: The various versions of the 50 series are simply innumerable. Particularly interesting is the variant with four domes, circulation plate with apron, Witte smoke deflectors and cabin tender. Typical for epoch III is the partially aluminum-colored lettering with DB biscuit. Until 1962, nearly 800 T50 BR 50s received a train driver's cab to save freight train vehicles. The cabin was in the middle of the tender, so the water box was extended to the rear beyond the buffer pile. |
|
36.90 EUR
(RRP*)
25.99 EUR*
Art.-no. Fleischmann_804002
Fleischmann
Luggage cart type Pw4 pr04, the DRG, epoch II.
Model with interior fittings and inserted windows, interior lighting can be retrofitted, faithfully painted and labeled. 4 movable doors. NEM 355 Coupler pocket with close-coupling link. Execution with so-called "Zugführerkanzel" in the middle roof area of the car. This allowed the conductor to observe the signals while driving. |
|
36.90 EUR
(RRP*)
25.99 EUR*
Art.-no. Fleischmann_814494
Fleischmann
2nd class Eurofima passenger coach, type Bmz, the ÖBB, epoch IV-V.
With interior decoration. The car is intended for the installation of interior lighting. NEM 355 Coupler pocket with short coupling kinematics. Car number other than Art. 814495. The EuroCity train EC 22/23 "Johann Strauss" operated from Vienna Westbahnhof to Cologne (back). The German electric locomotive class 103 remained in the early 1990s on the Austrian Westbahn in front of the car set. |
|
36.90 EUR
(RRP*)
25.99 EUR*
Art.-no. Fleischmann_814495
Fleischmann
2nd class Eurofima passenger coach, type Bmz, the ÖBB, epoch IV-V.
With interior decoration. The car is intended for the installation of interior lighting. NEM 355 Coupler pocket with short coupling kinematics. Car number other than Art. 814494. The EuroCity train EC 22/23 "Johann Strauss" operated from Vienna Westbahnhof to Cologne (back). The German electric locomotive class 103 remained in the early 1990s on the Austrian Westbahn in front of the car set. |
|
30.40 EUR
(RRP*)
19.99 EUR*
Art.-no. Fleischmann_841010
Fleischmann
Tank car "VTG" of the Italian State Railways FS, epoch IV - V.
Coupling pocket according to NEM 355 with KK kinematics. |
|
199.99 EUR*
Art.-no. Diverse_H66-85350
Diverse
Model details: |
|
199.99 EUR*
Art.-no. Diverse_H66-85351
Diverse
Model details: |
|
199.99 EUR*
Art.-no. Diverse_H66-85352
Diverse
Model details: |
|
199.99 EUR*
Art.-no. Diverse_H66-85353
Diverse
Model details: |
|
29.99 EUR*
Art.-no. MU_N-G32037
Modellbahn Union
1. running number, 8370-7895201-2 More information on this model and our product range can be found on our info pages. equipped with: |
|
34.99 EUR*
Art.-no. MU_N-G32038
Modellbahn Union
1. running number, 8370-7895202-0 More information on this model and our product range can be found on our info pages. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G32039
Modellbahn Union
1. running number, 3370-7890102-8 More information on this model and our product range can be found on our info pages. equipped with: |
|
34.99 EUR*
Art.-no. MU_N-G32040
Modellbahn Union
1. running number, 3370-7890103-6 More information on this model and our product range can be found on our info pages. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G32041
Modellbahn Union
1. running number, 3387-7898085-8 More information on this model and our product range can be found on our info pages. equipped with: |
|
34.99 EUR*
Art.-no. MU_N-G32042
Modellbahn Union
1. running number, 3387-7898086-6 More information on this model and our product range can be found on our info pages. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G32043
Modellbahn Union
1. running number, 3780-7898100-8 More information on this model and our product range can be found on our info pages. equipped with: |
|
34.99 EUR*
Art.-no. MU_N-G32044
Modellbahn Union
1. running number, 3780-7898101-6 More information on this model and our product range can be found on our info pages. equipped with: |
|
23.99 EUR*
Art.-no. MU_N-G35037
Modellbahn Union
1st running number of the series: 3380-4670853-7 More information on this model and our product range can be found on our info pages. equipped with: |
|
23.99 EUR*
Art.-no. MU_N-G36038
Modellbahn Union
1st running number of the series: 3182-4675052-1 More information on this model and our product range can be found on our info pages. equipped with: |
|
23.99 EUR*
Art.-no. MU_N-G36039
Modellbahn Union
1st running number of the series: 3387-4668628-0 More information on this model and our product range can be found on our info pages. equipped with: |
|
23.99 EUR*
Art.-no. MU_N-G36040
Modellbahn Union
1st running number of the series: 3182-4679001-4 More information on this model and our product range can be found on our info pages. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G54002
Modellbahn Union
2nd running number of the series: 268781 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G54004
Modellbahn Union
2nd running number of the series: 2180-1342378-3 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G54104
Modellbahn Union
2nd running number of the series: 2180-1338631-1 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.5cm per car. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G56002
Modellbahn Union
2nd running number of the series: 11008 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G56004
Modellbahn Union
2nd running number of the series: 303431 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G56006
Modellbahn Union
2nd running number of the series: 1180-8196005-6 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G56008
Modellbahn Union
1st running number of the series: 569981 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
32.99 EUR*
Art.-no. MU_N-G56009
Modellbahn Union
1st running number of the series: 569989 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
32.99 EUR*
Art.-no. MU_N-G56011
Modellbahn Union
1st running number of the series: 303426 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
29.99 EUR*
Art.-no. MU_N-G56014
Modellbahn Union
1st running number of the series: 2150-8196000-1 The cooling wagon is a 2-axle ferry wagon suitable for traveling into England. It is being used in mixed traffic and dedicated trains. The wagon was also used in the past war militarized zones in germany. equipped with: |
|
4.99 EUR*
Art.-no. MU_N-A00001
Modellbahn Union
Simple and effective: the gravel aid from DM-Toys in 2 mm thick MDF (medium density fibreboard).
Lasercut Kit Dimensions: 50x24x29 mm (WxDxH). We recommend gluing the gravel aid together. When using the gravel aid, you should take care not to push it too much on the tracks, but only pull it backwards, otherwise the material could suffer. The gravel aid is currently available in 2 versions. The gravel aid is offered for tracks without embankment (A00001) and for tracks with embankment (A00002). The ballast aid allows easy coding of code 80 and code 55 tracks. |
|
4.99 EUR*
Art.-no. MU_N-A00002
Modellbahn Union
Simple and effective: the gravel aid from DM-Toys in 2 mm thick MDF (medium density fibreboard).
Lasercut Kit Dimensions: 50x33x33 mm (WxDxH). Maximum height of the dam 5mm. We recommend gluing the gravel aid together. When using the gravel aid, you should take care not to push it too much on the tracks, but only pull it backwards, otherwise the material could suffer. The gravel aid is currently available in 2 versions. The gravel aid is offered for tracks without embankment (A00001) and for tracks with embankment (A00002). The ballast aid allows easy coding of code 80 and code 55 tracks. |
|
4.99 EUR*
Art.-no. MU_N-A00028
Modellbahn Union
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.
A set of 10 wheelie bins, or household waste containers. This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color. |
|
4.99 EUR*
Art.-no. MU_N-A00032
Modellbahn Union
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.
A set of 10 wheelie bins, or household waste containers. This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color. |
|
7.99 EUR*
Art.-no. MU_N-A00098
Modellbahn Union
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
|
9.99 EUR*
Art.-no. MU_N-A00142
Modellbahn Union
The Still Muli forklift was developed in Germany in the late 1940's by Still. It was the first forklift to be widely used by the Bundesbahn. Our model represents the one used in the 1950's on stations, goodsheds and many industrial sites.
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
|
12.99 EUR*
Art.-no. MU_N-A00043
Modellbahn Union
2 train lanterns, 2x2x3,5mm. LEDs, resistors and diodes are included. With the Schoenwitz Wickelschleifern power can simply be removed from the axles and thus produce the power supply of the lantern. But also for garden houses and balconies, the lantern is ideal.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
|
9.99 EUR*
Art.-no. MU_N-A00063
Modellbahn Union
Set with 7 pcs for Signal cabin interior: 2 lever frames, block machine, desk, stove, cabinet and locker.
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color. |
|
11.99 EUR*
Art.-no. MU_N-A00267
Modellbahn Union
Spur N model of a Hartra roller from the 1960s. The roller was with its 5 meters length and 3 meters height one of the larger types. The roller was filled with water before rolling and subsequently emptied again.
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
|
9.99 EUR*
Art.-no. MU_N-B00023
Modellbahn Union
lasercut kit, Dimensions 153 x 12 x 207 mm |
|
59.99 EUR*
Art.-no. MU_N-B00041
Modellbahn Union
Precise, highly detailed model of a wagon hall for the maintenance of passenger cars, multiple units and locomotives. The hall has three movable gates and is suitable for most passenger cars with a length of 230mm. The sawtooth roof has windows on one side, which provide an excellent insight into the interior. Likewise, the roof does not need to be glued so working in the engine shed can be done easily during plant operation.
The hall is designed so that it can be extended when using multiple kits both in width and in length. The required additional parts are included in each pack. This could even simulate a large ICE maintenance hangar. The track center distance is 32.5mm, the clearance height 30mm (electric locomotives and railcars must be driven in with lowered Panto and a Köf.) The picture shows an aged version, some beautiful additional photos of the model can be found on our Facebook page DM-Toys Facebook Post January 2017 |
|
6.99 EUR*
Art.-no. MU_N-B00048
Modellbahn Union
Modell based on Pruissian buildings used for exemple as gate keeper building. These Pruissian buildings were typically build with red bricks. The modell includes a variaty of self adhesive numbers, which can be used to mark the building.
|
|
6.99 EUR*
Art.-no. MU_N-B00049
Modellbahn Union
Model of a platform waiting room as it still can be found on several stations on the Berlin S-Bahn. These buildings are often decorated with beautiful coloured tiles. Through combining high end printing on graphic cardboard with lasercut we have been able to represent these tiles in detail.
|
|
39.99 EUR*
Art.-no. MU_N-B00054
Modellbahn Union
The water house with coal magazine is based on a building that was often seen on secondary and narrow-gauge railways in Era I. In the building there was a container for water on the upper floor and a storage room for coal on the ground floor. The relatively small amounts of water and coal were sufficient for the often small tank locomotives that drove on these routes.
Our model has a black 3d printed movable water crane on the gable which can be operated by the included servo. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832. There is a video on YouTube about the function of the water crane! |
|
6.99 EUR*
Art.-no. MU_N-B00055
Modellbahn Union
Set of 3 corrugated steel sheds, which were used for various purposes alongside the tracks. In our set you will find 2 grey ones and 1 printed in a rusty color, which can be used directly as weathered model.
|
|
6.99 EUR*
Art.-no. MU_N-B00057
Modellbahn Union
Model of a platform waiting room as it still can be found on several stations on the Berlin S-Bahn. These buildings are often decorated with beautiful coloured tiles. Through combining high end printing on graphic cardboard with lasercut we have been able to represent these tiles in detail. Architectural design and coloring make this building perfectly suitabe for use in a Berlin S-Bahn theme.
|
|
29.99 EUR*
Art.-no. MU_N-B00058
Modellbahn Union
N gauge model of a branch line small coaling plant. The loading is done by Hunte who are lifted with a crane from the coal bunker to the locomotive. The actual filling is done manually by tipping the hunte (2 of which are included in the kit).
The kit contains a servo with which the crane can be turned. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832. |
|
49.99 EUR*
Art.-no. MU_N-B00069
Modellbahn Union
The segment turntable is a special type of turntable. With it, the bridge girder only sweeps over a segment of the circle and therefore cannot rotate completely. The segment turntable is primarily used to move vehicles onto adjacent tracks in a space-saving manner, sometimes requiring less space than switches. Since segment turntables usually turn less than 180 degrees, it is not suitable for turning locomotives.
The kit contains a servo with which the stage can be rotated. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832. -The installation depth of the turntable is 9mm without servo. - Stage length 113mm -Rotation range 86mm (track center 77mm) The segment turntable is supplied complete with track profiles for the bridge. The track connections are not included. The position of the track connections (maximum 2) can be freely selected, and the servo control can then be used to precisely set the correct positions. |
|
129.99 EUR*
Art.-no. MU_N-B00070
Modellbahn Union
Our model is based on the jetties which, up to the 1970's, stood in the harbour of Sassnitz (Rügen).Contrary to the original our model has only 1 track. The prototype had a y-point on the second bridge segment, facilitating ferries with 2 track cargo bays. Although only 2 generalised sketches exist we have been able to reproduce the complex construction of the bridge. A jetty serves the loading of ferries and is constructed in such a way that the water level differences between tides can be overcome, making it possible to load the ferries at any given time.The jetties in Sassnitz contained two bridge segments, making it highly flexible.The first bridge was operated by means of two motors driving two worms, the second one used cables and contra weights. The model is constructed in such a way that it is moveable, giving you the opportunity to fix the bridge at any height. The kit includes 3D printed motors and worms. For building this kit expierence is advised!
|
|
49.99 EUR*
Art.-no. MU_N-B00078
Modellbahn Union
Model of a wagon tipper (or wagon tipper) type Gebauer. Waggon tipping systems are used to quickly unload O-wagons. The Gebauer wagon tipping system pulls the platform up on one side with steel cables. The freight wagon unloads at the front during the tipping process. The engines are in the prototype in the corrugated iron building which stands on a steel construction. On the unloading side there is a pit where the bulk material is collected.
In contrast to the prototype, the model's stage is raised from below by a servo motor included in the kit. The steel wires are therefore not shown in the N gauge model. The area around the tipper is lavishly engraved in a realistic cobblestone structure. The total height of the model is 118 mm including 33 mm installation depth. The model can be used from Era I to III. The kit contains a servo motor with which the tilt function can be controlled. The servo can be connected to any commercially available controller. We recommend the ESU SwitchPilot Servo 3, item no. ESU_51832. The wagon tipper is supplied complete with track profiles for the platform. There is a video on YouTube about the function of the N gauge wagon tipping system. |
|
4.99 EUR*
Art.-no. MU_N-F00015
Modellbahn Union
Load for the model railway Union Omm 37 with the dimensions 53 mm x 15 mm (length x width)
The load is laser cut and engraved and looks deceptively real. It consists of individual engraved material layers which are simply glued. The load is completely made in Germany! |
|
4.99 EUR*
Art.-no. MU_N-F00017
Modellbahn Union
Load for the model railway Union Omm 37 with the dimensions 53 mm x 15 mm (length x width)
The load is laser cut and engraved and looks deceptively real. It consists of individual engraved material layers which are simply glued. The load is completely made in Germany! |
|
4.99 EUR*
Art.-no. MU_N-F00024
Modellbahn Union
Load for the model railway Union Omm 37 with the dimensions 53 mm x 15 mm (length x width)
The load is laser cut and engraved and looks deceptively real. It consists of individual engraved material layers which are simply glued. The load is completely made in Germany! |
|
19.99 EUR*
Art.-no. MU_N-F00059
Modellbahn Union
The universally applicable, extremely filigree load includes 18 steel mats à 53 x 14mm which can be bundled individually or in three 6-packs with a height of 8mm. The steel mats can be used not only as a load, but also as a decoration detail. Strapping and squared timbers are of course included in the kit.
The deceptively real-looking N gauge cargo is delivered as a kit, which is easy to assemble and glue. The production of the load is completely in Germany! |
|
7.99 EUR*
Art.-no. MU_N-F00060
Modellbahn Union
Size: 30x15x10mm and30x10x7.5mm
The lavishly engraved, deceptively real-looking N gauge is delivered as a kit that is easy to assemble and glue. The production of the load is completely in Germany! |
|
6.99 EUR*
Art.-no. MU_N-F00061
Modellbahn Union
Size: 18x7x4.5mm, 9x9x9mm and 7x7x7mm
The lavishly engraved, deceptively real-looking N gauge is delivered as a kit that is easy to assemble and glue. The production of the load is completely in Germany! |
|
7.99 EUR*
Art.-no. MU_N-H00037
Modellbahn Union
The first German kiosks appeared during the mid 19th century and initially only sold non alcoholic beverages. During the industrial revolution they spread out over large parts of Germany. Nowadays kiosks not only sell alcoholic and non alcoholic beverages, but also newspapers, lottery tickets and tickets for public transport.
The prototype of our model is situated in Frankfurt. |
|
9.99 EUR*
Art.-no. MU_N-i00018
Modellbahn Union
lasercut kit, Dimensions 50x25x20 mm Storage room for dangerous substances as can be found on many industrial and railroad premises. The brick building has an adjoining fenced yard with a tiled floor and highly detailled steel fence. 360 ° Fotoanimation shows weathered model. We recommend Revell weathering colours for that! |
|
14.99 EUR*
Art.-no. MU_N-i00019
Modellbahn Union
lasercut kit, plastic and 3d printing material mix, Dimensions max 270 x 10 x 70 mm
|
|
14.99 EUR*
Art.-no. MU_N-i00020
Modellbahn Union
lasercut kit, plastic and 3d printing material mix, Dimensions max 220 x 140 x 70 mm
|
|
69.99 EUR*
Art.-no. MU_N-i00028
Modellbahn Union
Model based on an existing old steam brewery, with highly detailed brewery hall and two 3D printed brewing kettles with valves, thermometer and pipes. The building is placed on an engraved ground plate and can be extended on one side with a supplied railway ramp. A separate boiler house with chimney and a brick enclosure wall complete this beautiful ensemble.
|
|
69.99 EUR*
Art.-no. MU_N-i00035
Modellbahn Union
Our jubilee model for the 14th anniversary of DM-Toys is a scale 1:16 scale N model based on the harbor cranes in Salzgitter-Beddingen. The model of the mighty gantry crane was originally used as a coal crane and still stands today in the inland port of Beddingen. Engineered in steel, the crane is a very impressive structure and can be seen from afar.
With a total length of the model of 227 mm and a bridging of 150 mm, this giant is able to load up to 5 parallel tracks in the car. The crane and substructure are movable and can be moved to any position on your system. The model is kept in a deceptively similar green color as the prototype. Detailed stairs, gratings and ladders, as well as the detailed steel construction make the model a real eye-catcher on your system or diorama. The kit contains over 120 laser-cut and 13 3D printed parts (including the gripper) and is prepared for the installation of a servo motor (only for experienced hobbyists). Commercial track 55 & Code 80 Track can be used as the track for the crane. The right track for the tower is included in the kit. In our DM-Toys blog by Joep Stienen there is a manual for installing a servo motor. |
|
199.99 EUR*
Art.-no. MU_N-i00041
Modellbahn Union
The new Modellbahn Union engine room with motorized steam engine (MU_N-i00041) is an absolute highlight in the N-gauge functional model range.
Through innovative "Additive Design" we have managed to print the steam engine and the generator in 3D printing as moving objects, which is driven by a geared motor (also included in delivery). The assembly of the steam engine and the generator is eliminated, the customer only needs to paint the machines and glue them into the Lasercut building kit. Also, the assembly of the engine does not place increased demands on the modeler. To dampen the noise of the geared motor, we have added special damping material to the kit. This additionally ensures an enormous stability of the building. The building model was not modeled on any particular model, so it can be used for both Epoch I & II themes, as well as for museum topics. The Wilhelminian architecture was mixed with Art Deco elements to create a wonderful look. The large windows, as well as a removable roof allow prying eyes a wonderful insight into the lovingly designed interior with the moving steam engine. All additional parts pictured in the photos and videos are included with this luxury kit. - Dimensions 200 * 105 * 74 mm (LBH) - 262 laser cut parts - 24 highly detailed 3D printed accessories (cranes, pressure gauges, boiler doors, control box, control panel, piping and taps) - moving steam engine with generator - Geared motor - 4 ceiling lamps including LED, resistor and diode - 1x LED for the boiler room - Includes large control box and a control panel. In a Youtube video you can admire the details and the model in motion. |
|
7.99 EUR*
Art.-no. MU_N-L00029
Modellbahn Union
lasercut kit, easy to assemble, no coloring necessary
|
|
7.99 EUR*
Art.-no. MU_N-L00030
Modellbahn Union
The set includes both cover plates and canal dummies, giving you the opportunity to create a 3D effect.
5 Pieces 2,5 = 300 mm 5 Pieces 5 = 300 mm 2x4 15 Grad EckTeile 2x4 30 Grad Eck Teile 10 Deckplatten 2,5x2,5 mm 10 Deckplatten 5x5 mm |
|
12.99 EUR*
Art.-no. MU_N-L00044
Modellbahn Union
A colourful designed fish and chips stand which invites your figures to a quick bite! The kit also includes a 3D printed oven and chimney. Using state of the art printing we have been able to produce a remarkable model which surely will be a focus point on your layout.
|
|
11.99 EUR*
Art.-no. MU_N-L00045
Modellbahn Union
Three different wood stores, one with small shed. Wood stores may be used for exemple behind houses or in woods. Laser cut plywood.
Dimensions: 22x8x20 / 22x8x15 / 32x8x20 mm |
|
14.99 EUR*
Art.-no. MU_N-L00056
Modellbahn Union
Model of an octagonal kiosk with advertising signs and printed interior.
|
|
9.99 EUR*
Art.-no. MU_N-L00059
Modellbahn Union
Super value set containing 89 concrete slabs, of which 25 are weathered with cracks and 8 pieces for use at railroad crossings. The prototypical size is 1x2 metres.
12,5 x 6,25 x 1 mm - 81 Pieces 12,5 x 7 x 1 mm - 8 Pieces |
|
9.99 EUR*
Art.-no. MU_N-L00068
Modellbahn Union
A dilapidated concrete wall with broken concrete and holes. The steel profiles have openings for barbed wire.
|
|
14.99 EUR*
Art.-no. MU_N-L00070
Modellbahn Union
A typical kiosk which could be found throughout the Ruhr area. These wooden kiosks were often placed near the gates of factories and mines and were simple in both construction and interior. Our model comes with 2 dustbins, 2 tables, 4 chairs and a warm white led for interior lighting. Advertisements and a basic interior complete this model, making it a complete scene for your layout.
|
|
14.99 EUR*
Art.-no. MU_N-L00071
Modellbahn Union
Set with sidewalk pavement. The total length of 900 mm is excluding the corner segments.
|
|
14.99 EUR*
Art.-no. MU_N-L00073
Modellbahn Union
Set with sidewalk pavement. The total length of 800 mm is excluding the corner segments.
|
Yours sincerely
Daniel Mrugalski
DM-Toys