Ladies and Gentlemen,
we wish you a Merry Christmas!
199.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Fleischmann_737104
Fleischmann
Electric cog railway of the Edelweiß Private Railways. Epoch III. Metal die-cast frame. True to the original livery and lettering. Drive on 2 axles, one of them has a cog wheel pressed onto with the module 0,4. Triple LED headlights that change with the direction of travel. Automatic couplers on both ends of the cog railway. Suitable to the Fleischman rack track 9119. Can be also used for standard adhasion operations. |
249.90 EUR
(RRP*)
159.99 EUR*
Art.-no. Fleischmann_737184
Fleischmann
Cogwheel electric locomotive of the Edelweiss private railway, epoch III.
Factory-installed, load-controlled DCC decoder for digital operation. Die-cast metal housing. Prototypically painted and labeled. Drive on 2 axles, where on one axle a gear with the module 0.4 is pressed. LED top lighting, changing with the direction of travel. Switchable, red LED tail light right. Automatic coupling on both sides. Suitable for the Fleischmann rack rail 9119 and for the standard adhesion operation. |
189.90 EUR
(RRP*)
169.99 EUR*
Art.-no. Fleischmann_739304
Fleischmann
Electric locomotive class 193, SBB Cargo International. Epoch VI.
New 2018 design ! Model in true to the original livery and lettering. In-plane applied windows. Metal die-cast chassis. 5-pole motor with flywheel. Drive on four axles and two traction tyres. Interface according to NEM 662 (Next18) to adapt a decoder. Coupler pocket according to NEM 355 standards and close coupler motion link. White and red LED triple headlights that change with the direction of travel. The headlights can be partially or even entirely switched off with contact plates. Prototype: The Siemens Vectron is based on experience gained from the building of around 1900 locomotives of the so-called Eurosprinter family. At the beginning of the 2000ies, Siemens presented the Taurus as a true success story of the international rail transport. A few years later the Vectron followed and was presented as a new milestone in the Siemens locomotive history. The outstanding aerodynamic design, the particularly good crash safety as well as great flexibility characterize the Vectron. The advantage for the customers of the Vectron lies in the countless possibilities of the execution of its technical characteristics. A modular construction system ensures that the most diverse requirements of the respective railway companies can be met. Thus, locomotives are available for various current systems, speeds or train control/command systems. This makes the locomotive also particularly attractive for the larger locomotive rental companies such as the Railpool, the MRCE or the ELL. National railways as well have already implemented the Vectron successfully and are running goods trains from the north to the south. On their routes the trains pass different power systems and various control/command systems. The Vectron does not require any additional locomotive changes. |
36.90 EUR
(RRP*)
25.99 EUR*
Art.-no. Fleischmann_814492
Fleischmann
1st class Eurofima passenger carriage type Amz of the Austrian Federal Railways. Epoch IV-V.
Model with interior design. The cars are equipped ready for the installtion of interior lighting. Coupler pocket according to NEM 355 standards and close coupling mechanism. The EuroCity train EC 22/23 "Johann Strauß“ operated on the lines between Vienna Westbahnhof and the City of Cologne. In the early 1990s the German electric locomotive Class 103 hauled wagons on the lines of the Austrian Westbahn line.Ideal wagon combination: 814492 - 814496. |
103.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Jaegerndorfer_JC60310
Jägerndorfer
Set with three two-axle passenger cars type Bi. Different inscriptions, half window variations, 1x half window, 2x full window
Based on the experiences made before the war, ÖBB developed the program for the production of railcar wagons at the end of the 1940s. With as few, uniquely designed parts as possible, one should try to replace the wooden boxes of the largest possible number of old buildings with steel structures. Basically, it was decided to build all two- and three-axle vehicles uniformly as a two-axle vehicle. The body frame was made of prefabricated frame "frames", which consisted of commercial rolled profiles made. In the design of the interior, it was decided for a metropolitan area with the seat division 2 + 2. The conversion program was in addition to two- and three-axle Austrian designs and vehicles of German Länderbahnbauarten that had remained at the end of the war on the territory of Austria included. |
103.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Jaegerndorfer_JC60320
Jägerndorfer
Set with three two-axle passenger cars type Bi. Different inscriptions, half window variations, 2x half windows, 1x full window
Based on the experiences made before the war, ÖBB developed the program for the production of railcar wagons at the end of the 1940s. With as few, uniquely designed parts as possible, one should try to replace the wooden boxes of the largest possible number of old buildings with steel structures. Basically, it was decided to build all two- and three-axle vehicles uniformly as a two-axle vehicle. The body frame was made of prefabricated frame "frames", which consisted of commercial rolled profiles made. In the design of the interior, it was decided for a metropolitan area with the seat division 2 + 2. The conversion program was in addition to two- and three-axle Austrian designs and vehicles of German Länderbahnbauarten that had remained at the end of the war on the territory of Austria included. |
329.90 EUR
(RRP*)
249.99 EUR*
Art.-no. Hobbytrain_H10183S
Hobbytrain
Hobbytrain BLS Ae 6/8 8-axle electric locomotive brown No. 203 BLS, light change according to Swiss model, Ep.IV
The first 4 locomotives of the BLS series BE 6/8 201-204 were built at the Breda company in Italy and delivered between 1926-31. After modifications to the performance increase between 1939-40, the locomotives are now called Ae 6/8. Between 1954 and 56, the locomotives 201-204 undergo a significant conversion to optically adapt to the successor series 205-208. Among other things, a rounded front and a seat for the driver are installed. The difference to the locomotives 205-208 is the shorter cab and the large slightly offset center window. The roof brake is reinforced by increasing the resistance on the roof and the second pantograph is eliminated. Further conversions are carried out afterwards as with the locomotives 205-208. Model Features: - 5-pole motor - Current consumption across all axes - equipped ex factory with sound decoder ESU 4.0 - Change of light according to Swiss model - Cab lighting - Consideration of all design differences in detail - prepared for the installation of a loudspeaker - fine and detailed printing - Recommended from radius 3 - 1: 160 / lane N |
69.90 EUR
(RRP*)
49.99 EUR*
Art.-no. Hobbytrain_H23483
Hobbytrain
Hobbytrain 2er Set Uacs Silowagen SBB Cargo, blue + gray, Ep.V-VI
Four-axle silo truck with pneumatic unloading. Especially suitable for dusty bulk materials such as cement, gypsum, lime, dolomite, etc. A part of these wagons is used exclusively for the transport of eg flour. Since 1972, 375 of these wagons have been in use at SBB Cargo as well as at the major cement producers Holcim, Jura Cement and Ciments Vigier. The BLS also procured 4 cars of this type. LüP: 85mm per car |
33.21 EUR*
Art.-no. Hobbytrain_H23484
Hobbytrain
Hobbytrain Uacs Zementwagen Holcim, 3. Betr. No. as a supplement to Holcim set H23482, Ep.VI
Four-axle silo truck with pneumatic unloading. Especially suitable for dusty bulk materials such as cement, gypsum, lime, dolomite, etc. A part of these wagons is used exclusively for the transport of eg flour. Since 1972, 375 of these wagons have been in use at SBB Cargo as well as at the major cement producers Holcim, Jura Cement and Ciments Vigier. The BLS also procured 4 cars of this type. LüP: 85mm per car |
179.99 EUR*
Art.-no. Minitrix_16234
Minitrix
Prototype: German State Railroad (DR) diesel locomotive, road number 132 372-4, C-C wheel arrangement, built starting in 1974 in the Soviet Union for the German State Railroad, nicknamed "Ludmilla". Use: Heavy passenger and freight trains.
Highlights: Affordable model with sound from the new Hobby Program. Model: The locomotive has a built-in digital decoder and sound generator for DCC and Selectrix operation. It also has a motor with a flywheel. 4 axles powered. Traction tires. The triple headlights change over with the direction of travel. Length over the buffers 126 mm / 4-15/16". |
89.99 EUR*
Art.-no. Minitrix_15541
Minitrix
Prototype: 2 couchette coaches of the type UIC-X (Bcm) of the Italian State Railways (FS). Operating Condition Epoch VI.
Model: Kinematic for close coupling. Prepared for the subsequent installation of interior lighting. Overall length over buffer 330 mm. Unique series. |
139.99 EUR*
Art.-no. Dapol_2D-009-003
Dapol
The BR Class 121 is a type of DMU built by Pressed Steel Company in Cowley in 1960. In all 16 single car driving vehicles or bubble cars as they were nicknamed and 10 trailer cars entered service during 1960. Two are still in service today and eight survive into preservation. The Class 121 was initially designed for use on branchline duties in the Western Region of BR and over its long service life has seen many modifications and changes on refurbishment including the removal of the distinctive front exhausts and the plating over of the 4 digit roof level head code indicator box in the 1970's. |
139.99 EUR*
Art.-no. Dapol_2D-009-004
Dapol
The BR Class 121 is a type of DMU built by Pressed Steel Company in Cowley in 1960. In all 16 single car driving vehicles or bubble cars as they were nicknamed and 10 trailer cars entered service during 1960. Two are still in service today and eight survive into preservation. The Class 121 was initially designed for use on branchline duties in the Western Region of BR and over its long service life has seen many modifications and changes on refurbishment including the removal of the distinctive front exhausts and the plating over of the 4 digit roof level head code indicator box in the 1970's. |
139.99 EUR*
Art.-no. Dapol_2D-009-005
Dapol
The BR Class 121 is a type of DMU built by Pressed Steel Company in Cowley in 1960. In all 16 single car driving vehicles or bubble cars as they were nicknamed and 10 trailer cars entered service during 1960. Two are still in service today and eight survive into preservation. The Class 121 was initially designed for use on branchline duties in the Western Region of BR and over its long service life has seen many modifications and changes on refurbishment including the removal of the distinctive front exhausts and the plating over of the 4 digit roof level head code indicator box in the 1970's. |
139.99 EUR*
Art.-no. Dapol_2D-009-006
Dapol
The BR Class 121 is a type of DMU built by Pressed Steel Company in Cowley in 1960. In all 16 single car driving vehicles or bubble cars as they were nicknamed and 10 trailer cars entered service during 1960. Two are still in service today and eight survive into preservation. The Class 121 was initially designed for use on branchline duties in the Western Region of BR and over its long service life has seen many modifications and changes on refurbishment including the removal of the distinctive front exhausts and the plating over of the 4 digit roof level head code indicator box in the 1970's. |
10.99 EUR*
Art.-no. Dapol_2F-034-065
Dapol
Equipped with: |
15.99 EUR*
Art.-no. Dapol_2F-036-041
Dapol
Equipped with: |
10.99 EUR*
Art.-no. Dapol_2F-034-071
Dapol
Equipped with: |
11.99 EUR*
Art.-no. Dapol_2F-034-072
Dapol
Equipped with: |
14.50 EUR*
Art.-no. Artitec_316.046
Artitec
ready-made
|
14.50 EUR*
Art.-no. Artitec_316.047
Artitec
ready-made
|
24.90 EUR*
Art.-no. Artitec_6160083
Artitec
Hand-colored finished model made of resin and etched parts
|
17.99 EUR*
Art.-no. Oxford_NSHL01ST
Oxford
Ready-made model in an appealing display packaging. Vehicle with rotating wheels and a fine paint job. The ramps of the low loader are movable and can represent both driving and loading situations.
|
5.99 EUR*
Art.-no. Oxford_NCOR3001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
5.99 EUR*
Art.-no. Oxford_NFARM002
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
5.99 EUR*
Art.-no. Oxford_NFARM003
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
6.99 EUR
(RRP*)
3.99 EUR*
Art.-no. Oxford_NFT003
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
5.99 EUR*
Art.-no. Oxford_NMN001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
5.99 EUR*
Art.-no. Oxford_NMN006
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
6.99 EUR*
Art.-no. Oxford_NNMN001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
6.99 EUR
(RRP*)
2.99 EUR*
Art.-no. Oxford_NPB002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
6.99 EUR*
Art.-no. Oxford_NTRAIL002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
6.99 EUR*
Art.-no. Oxford_NTRAIL006
Oxford
Ready-made model in an appealing display packaging. Vehicle with rotating wheels and a fine paint job. |
Yours sincerely
Daniel Mrugalski
DM-Toys