Dear customer,
here our novelties and bargains:
9.99 EUR*
Art.-no. MU_N-A00026
Modellbahn Union
On December 5, 1854 Ernst Litfaß got the first approval for his advertising pillars. In 1855 the first 100 advertising pillars were erected in Berlin and named after the inventor.
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00292
Modellbahn Union
Backhoe, lattice ladle, ditch cleaning bucket (2m wide) and grave trapeze spoons. Delivery of course without the excavator, but we also offer this: CAT 315
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
6.99 EUR*
Art.-no. MU_N-A00302
Modellbahn Union
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
6.99 EUR*
Art.-no. MU_N-A00303
Modellbahn Union
Table with 4 chairs
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
5.99 EUR*
Art.-no. MU_N-L00084
Modellbahn Union
Lasercut Kit
|
4.99 EUR*
Art.-no. MU_N-L00085
Modellbahn Union
Lasercut Kit
|
5.99 EUR*
Art.-no. MU_N-A00185
Modellbahn Union
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
5.99 EUR*
Art.-no. MU_N-L00086
Modellbahn Union
Lasercut Kit
|
5.99 EUR*
Art.-no. MU_N-L00087
Modellbahn Union
Lasercut Kit
|
7.99 EUR*
Art.-no. MU_N-M00016
Modellbahn Union
Lasercut Kit
|
19.99 EUR*
Art.-no. MU_N-M00123
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. A matching decal sheet is under the item no. MU_N-M00100 available.
The Jagdpanzer V Jagdpanther (Sd.Kfz. 173) was a World War II used by the German Wehrmacht Jagdpanzer. At Wikipedia there is a detailed documentation of the role model. |
29.99 EUR*
Art.-no. MU_N-M00550
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. The tower of the tank is rotatable.
The Leclerc is a battle tank made by the French armament company Nexter, named after the major general of the Second World War, Jacques-Philippe Leclerc de Hauteclocque. He is currently the main battle tank of the French Army and also in service with the armed forces of the United Arab Emirates. At Wikipedia there is a detailed documentation of the role model. |
29.99 EUR*
Art.-no. MU_N-M00551
Modellbahn Union
The highly detailed, unpainted finished model was produced using the 3D printing process and can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). The model weighs only a few grams and is therefore ideally suited for loading on N gauge wagons. The tower of the tank is rotatable.
The Leclerc is a battle tank made by the French armament company Nexter, named after the major general of the Second World War, Jacques-Philippe Leclerc de Hauteclocque. He is currently the main battle tank of the French Army and also in service with the armed forces of the United Arab Emirates. At Wikipedia there is a detailed documentation of the role model. |
16.19 EUR*
Art.-no. Minitrix_18082
Minitrix
Prototype: Omm 53 high-side car of the German Federal Railways (DB). European standard type with 10.0 m length.
Model: With kinematics for close coupling, simplified design. Length over buffer 63 mm. |
16.19 EUR*
Art.-no. Minitrix_18083
Minitrix
High sidecar Es 5520 of the Deutsche Reichsbahn (DR). European standard type with 10.0 m length.
Model: with kinematics for close coupling, simplified design. Length over buffer 63 mm. |
99.99 EUR*
Art.-no. Diverse_Goodsmile-933674
Diverse
Content: 1 plastic model kit Set with low-loader wagon, launch pad, rocket and space transporter. Plastic kit of colored parts, additional decals to the design are included. The model is equipped with plastic wheels and standard N couplers. The model can be assembled after assembly in drive mode or start mode. The space transporter can be built separately.Due to its size, the model is only partially suitable for normal model railway operation. Kit for experienced modellers. Well illustrated and numbered construction manual with Japanese instructions. Scale 1/150 Length 32cm |
109.99 EUR*
Art.-no. Kato_2020-1
Kato
equipped with: |
259.99 EUR*
Art.-no. Microace_A0754
Microace
Contents: 6-piece train set
equipped with: - Engine - traction tires - light change white-red - movable pantograph - Standard N couplings |
137.99 EUR*
Art.-no. Tomix_2240
Tomix
equipped with: |
67.20 EUR
(RRP*)
59.99 EUR*
Art.-no. Tomix_6425
Tomix
rail vacuum cleaner
The classic in a new design! Immediately available, permanently reduced in price! The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner. |
67.20 EUR
(RRP*)
59.99 EUR*
Art.-no. Tomix_6426
Tomix
rail vacuum cleaner
The classic in a new design! Immediately available, permanently reduced in price! The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner. |
14.99 EUR*
Art.-no. Tomix_6423
Tomix
3 inserts with grinding and 3 with polishing function, as well as brush and sponge for use with the Tomix cleaning trolley 6421, 6422, 6425, 6426 etc..
Suitable for all cleaning trolleys from the Tomix range. |
6.99 EUR*
Art.-no. Tomix_6424
Tomix
30 replacement pads for the TOMIX cleaning trolley 6421, 6422, 6425, 6426
|
5.00 EUR*
Art.-no. FKS_160-005-01
FKS
Deflection frame for Wiking MB L 2500, MB and Magirus handlebar
Kit of 0.2mm nickel silver The illustrated vehicles are NOT included. |
15.00 EUR*
Art.-no. FKS_160-080-35
FKS
Bus stop signs, set of 24 pieces
In Germany, a stop is marked with a corresponding traffic sign. At this traffic sign, public transport stops on schedule or on request. The stop signs offered here are usable from about 1940. The pictured decoration objects and vehicles are not included! |
7.50 EUR*
Art.-no. FKS_160-105-04
FKS
Sheet metal patches were an elementary component of repairs to vehicles, especially in open freight wagons. Especially the older cars with board construction were not spared in the operation of the post-war period and had to be repaired at short notice. The Wagenmeistereien held for pieces of metal in various and later standardized sizes, which were then screwed to the side walls if necessary. In the relevant literature, many role model photos testify to how the patches give the car an individual appearance. On other occasions, the sheets were used everywhere in the field of railway.
Board made of 0.1mm nickel silver plate with 50 pieces in different sizes for the small train. The illustrated cars, buildings and decorations are not included. |
42.00 EUR*
Art.-no. FKS_160-112-37
FKS
kit
An aerial ladder is a rescue vehicle. The kit consists of a 3D printed chassis, wheels, superstructure, ladder and inclined supports. Furthermore, the kit includes etched structural plates for the construction soiwe etched and already finished ladder park. A corresponding driver's cab (this is NOT included in the kit!) Can be taken from a Wiking model. |
42.00 EUR*
Art.-no. FKS_160-112-38
FKS
kit
An aerial ladder is a rescue vehicle. The kit consists of a 3D printed chassis, wheels, superstructure, ladder and inclined supports. Furthermore, the kit includes etched structural plates for the construction soiwe etched and already finished ladder park. A corresponding driver's cab (this is NOT included in the kit!) Can be taken from a Wiking model |
42.00 EUR*
Art.-no. FKS_160-112-39
FKS
kit
An aerial ladder is a rescue vehicle. The kit consists of a 3D printed chassis, wheels, body, ladder and helical supports. Furthermore, the kit includes etched structural plates for the construction as well as an etched and already finished ladder park. A corresponding driver's cab (this is NOT included in the kit!) Can be taken from a Wiking model. |
23.00 EUR*
Art.-no. FKS_160-112-52
FKS
kit
A refueling vehicle is a type of vehicle which usually has a fire pump and a large fire water tank, with which firefighting is possible for a certain period of time without hydrants and fire extinguishing water points. Thus, these vehicles are primarily equipped for fire fighting and human rescue , The kit consists of a 3D printed structure and associated Starktonhörnern.Weiterhin the kit includes an etched Struktroplus for the roof of the body, a roof rail and 2 different ladder for the rear of the body. The base vehicle required is a MB L322 from Lemke Mini's (this vehicle is NOT included in the kit!). |
10.00 EUR*
Art.-no. FKS_160-112-90
FKS
Kit 3D, unpainted
Powder extinguishers are used to extinguish fires without the use of water. This may be necessary if burning substances or substances stored in the vicinity of a fire would be sensitive to water. Therefore, fire-retardant powder is used as the extinguishing agent. Powder extinguishers usually have 250 kg extinguishing powder and a propellant gas (nitrogen or carbon dioxide) loaded and are used in gas and dangerous goods fires. |
8.00 EUR*
Art.-no. FKS_160-200-41
FKS
Rotating beacons (RKL) or beacons are called warning lights or beacons.
They are used for easier optical detection, securing or marking of danger spots. These beacons are fitted, inter alia, to emergency vehicles of the BOS (authorities and organizations with security tasks). The set includes 10 rotating beacons (RKL) in resin 3D printing (color: CLEAR). |
8.00 EUR*
Art.-no. FKS_160-200-42
FKS
Rotating beacons (RKL) or beacons are called warning lights or beacons.
They are used for easier optical detection, securing or marking of danger spots. These beacons are fitted, inter alia, to emergency vehicles of the BOS (authorities and organizations with security tasks). The set includes 10 rotating beacons (RKL) in resin 3D printing (color: CLEAR). |
8.00 EUR*
Art.-no. FKS_160-200-43
FKS
Rotating beacons (RKL) or beacons are called warning lights or beacons.
They are used for easier optical detection, securing or marking of danger spots. These beacons are fitted, inter alia, to emergency vehicles of the BOS (authorities and organizations with security tasks). The set includes 10 rotating beacons (RKL) in resin 3D printing (color: CLEAR). |
8.00 EUR*
Art.-no. FKS_160-200-44
FKS
Rotating beacons (RKL) or beacons are called warning lights or beacons.
They are used for easier optical detection, securing or marking of danger spots. These beacons are fitted, inter alia, to emergency vehicles of the BOS (authorities and organizations with security tasks). The set includes 10 rotating beacons (RKL) in resin 3D printing (color: CLEAR). |
8.00 EUR*
Art.-no. FKS_160-200-45
FKS
A compressed air fanfare (also called colloquial Martin's horn) is an acoustic warning device on vehicles of the BOS (authorities and organizations with security tasks - fire brigade, THW, police, aid organizations) is to be found primarily.
Compressed air fanfares (following horns) are used in combination with blue light (rotating beacons, rotating beacons) as a special signal to signal the road users traffic hazards or to claim special rights. The set contains 5 compressed air fanfares 2-fold right and 5 compressed air fanfares 2-fold left in Resin 3D-print (color: CLEAR). |
8.00 EUR*
Art.-no. FKS_160-200-46
FKS
A compressed air fanfare (also called colloquial Martin's horn) is an acoustic warning device on vehicles of the BOS (authorities and organizations with security tasks - fire brigade, THW, police, aid organizations) is to be found primarily.
Compressed air fanfares (following horns) are used in combination with blue light (rotating beacons, rotating beacons) as a special signal to signal the road users traffic hazards or to claim special rights. The set contains 5 compressed air fanfares 2-fold right and 5 compressed air fanfares 2-fold left in Resin 3D-print (color: CLEAR). |
7.00 EUR*
Art.-no. FKS_160-915-11
FKS
warning mark
- Manufactured using the screen printing process - Sheet with 15 individual water slides / decals The signs are used to identify containers, skips, access roads to buildings and systems, entrances and exits to buildings or squares, passages through tunnels. |
7.00 EUR*
Art.-no. FKS_160-915-12
FKS
Decorative strips for PK and truck
- Manufactured using the screen printing process - Arc each with 10 decorative strips in chrome look, or chrome look with black central stripe (each 40 millimeters long) The decorative strips can be used on both cars and trucks. |
7.00 EUR*
Art.-no. FKS_160-975-02
FKS
Medical crosses (round) for Bundeswehr vehicles
- Manufactured using the screen printing process - Sheet with 36 decals / decals - 3 different sizes |
24.99 EUR
(RRP*)
11.99 EUR*
Art.-no. Lemke_LC4323
Lemke
The VW T3 from Volkswagen was the third generation of the VW van. It was produced from 1979 to 1992 and was the last transporter series with rear-wheel drive. After the VW 411/412 from 1968, the T3 was the last new development of a vehicle from Volkswagen with air-cooled rear engine. Like all VW buses, the third generation also bore the type designation Type 2. Within this series, the individual models T1, T2 and T3 were numbered internally.
In our DM-Toys blog by Christian Weiß, there are more interesting photos and information! |
4.10 EUR*
Art.-no. Fleischmann_20023
Fleischmann
Disc wheel set, insulated on one side.
Wheel diameter: 6 mm. Axle length: 13.65 mm. Wheel flange height: 0.9 mm. Content: 2 pieces / pack. |
2.00 EUR*
Art.-no. Fleischmann_20024
Fleischmann
Disc wheel set, insulated on both sides.
Wheel diameter: 5 mm. Axle length: 13.65 mm. Wheel flange height: 0.9 mm. Content: 2 pieces / pack. |
8.40 EUR
(RRP*)
3.99 EUR*
Art.-no. Beli-Beco_113601
Beli-Beco
Filigree finished model made of metal.
Height 60 mm Light bulb 9535 Note: This Beli Beco railway lamps is manufactured in Germany and is equipped with 16 or 19 volt incandescent lamps. |
13.50 EUR
(RRP*)
7.99 EUR*
Art.-no. Beli-Beco_113602
Beli-Beco
Filigree finished model made of metal.
Height 60 mm Light bulb 9535 Note: This Beli Beco railway lamps is manufactured in Germany and is equipped with 16 or 19 volt incandescent lamps. |
7.80 EUR
(RRP*)
3.99 EUR*
Art.-no. Beli-Beco_116061
Beli-Beco
from German manufacturing
|
9.80 EUR
(RRP*)
3.99 EUR*
Art.-no. Beli-Beco_116461
Beli-Beco
Filigree finished model made of metal.
Height 44 mm Light bulb 9516 Note: This Beli Beco railway lamps is manufactured in Germany and is equipped with 16 or 19 volt incandescent lamps. |
9.80 EUR
(RRP*)
2.99 EUR*
Art.-no. Beli-Beco_116471
Beli-Beco
Filigree finished model made of metal.
Height 54 mm Light bulb 9516 Note: This Beli Beco railway lamps is manufactured in Germany and is equipped with 16 or 19 volt incandescent lamps. |
11.60 EUR
(RRP*)
4.99 EUR*
Art.-no. Beli-Beco_116632
Beli-Beco
from German manufacturing
|
12.49 EUR
(RRP*)
1.99 EUR*
Art.-no. Revell_64904
Revell
Die EA-18G Growler wird von der US Navy als Störflugzeug zur elektronischen Kriegsführung eingesetzt und ersetzt die EA-6B Prowler. Ihre Aufgabe ist es gegnerische Kommunikations- und Radareinrichtungen zu überwachen und anzugreifen. Für die Bekämpfung von Radarstationen verfügt sie über HARM- Lenkwaffen.
Einzelteile: 63 Länge: 127mm Spannweite: 93mm Das Modell: - Detaillierte Oberflächen mit versenkten Blechstößen - Zweisitzer-Cockpit mit Schleudersitze - Detailliertes Fahrwerk - 6 Tragflächenpylone und Rumpfpylon - 2 ALQ-99 Störbehälter - 2 ALQ-218 Receiverpods - 2 AIM-9x-Lenkwaffen - 2 Zusatztanks - Authentische Abziehbilder für folgende Version: - EA-18G Growler NL 540 BuNo. 166894 VAQ-132 Scorpions , Operation Odyssey Dawn - Aviano AB - Lybia. March 2011 Model-Set inkl. 3 Farben, 1 Pinsel und 1 x Klebstoff Warnungen: Konservierungsmittel, Preservatives, Agents de préservation: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE,BENZISOTHIAZOLINONEAchtung! Nur für Kinder über 8 Jahren. Benutzung unter Aufsicht von Erwachsenen.Lösungsmittelhaltiger Kleber enthalten. |
14.90 EUR
(RRP*)
4.99 EUR*
Art.-no. Diverse_Alba-2472
Diverse
1. Auflage, Paperback |
14.90 EUR
(RRP*)
4.99 EUR*
Art.-no. Diverse_Alba-4242
Diverse
164 Seiten, ca. 143 Abbildungen, Format 17,8 x 21,3 cm, Paperback
Alba Verlag ISBN-13: 978-3-87094-242-7 Dieses Buch soll dem Modelleisenbahn- und Modellautofreund mit ausführlichen Informationen und durch die Vermittlung fundierten Fachwissens helfen, mit den richtigen Farben und Beschriftungen aus seinen Modellen Schmuckstücke zu machen. An leicht nachzuvollziehenden praktischen Beispielen wird durch Text und Fotos demonstriert, wie man beim Lackieren und Beschriften von Fahrzeugen zu professionellen Arbeitsergebnissen kommt. |
12.70 EUR
(RRP*)
4.99 EUR*
Art.-no. Diverse_Alba-4254
Diverse
120 Seiten, ca. 119 Abbildungen, Format 17,8 x 21,2 cm, Paperback
Alba Verlag ISBN-13: 978-3-87094254-0 Wie das Tüpfelchen das i, so krönt die Landschaft eine Modelleisenbahn-Anlage. Soll es eine vorbildgetreu wirkende Mini-Landschaft werden, muss der Bauherr nicht nur handwerkliches Geschick beweisen, er muss auch Grundsätzliches über Planung, Aufbau und Detailgestaltung beachten. Nur, wo gut geplant und richtig gebaut wird, kann eine Modellbahn-Anlage entstehen, die vollkommen Freude macht. Dieses Buch zeigt und erläutert, wie es gemacht wird. |
Yours sincerely
Daniel Mrugalski
DM-Toys