Dear customer,
Today we present you the as yet unannounced model railway Union freight car Gms 54 as a surprise novelty! The car is now available in 8 variants. Also new from the model railway Union a selection of interesting track accessories (sheet metal channels, deflection boxes, pressure roller boxes and switch lanterns).
29.99 EUR*
Art.-no. MU_N-G54001
Modellbahn Union
1st running number of the series: 267608 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54002
Modellbahn Union
2nd running number of the series: 268781 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54003
Modellbahn Union
1st running number of the series: 2180-1337015-8 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54004
Modellbahn Union
2nd running number of the series: 2180-1342378-3 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.9cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54101
Modellbahn Union
1st running number of the series: 266129 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.5cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54102
Modellbahn Union
2nd running number of the series: 264304 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.5cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54103
Modellbahn Union
1st running number of the series: 2180-1343355-0 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.5cm per car. equipped with: |
29.99 EUR*
Art.-no. MU_N-G54104
Modellbahn Union
2nd running number of the series: 2180-1338631-1 The Gms 54 were the first covered type of DB from conversions of older cars. The chassis was mainly used from the older cars. Special production lines had been set up in the maintenance depots Fulda and München-Freimann. About 14100 Gms 54 were made until the early 1960s. The car bodies were made of synthetic wood panels (after initially thought of planking), the floor made of pine bollards, the roof made of PIB or PVC plastic. 13800 cars were redrawn to Gls 205 by 1968 and got UIC steps and other modifications. Among other things, the roofs were replaced by StCu sheet metal. At the end of 1987, the stock was still at 4000 cars, these were then gradually phased out. Some cars were still used as a railway service cars until the 1990s, others were sold by the DB to construction companies. The Modellbahn Union N scale models of the Gms 54 cars are characterized by detailed design and printing. Country-specific abbreviations and various addresses are also taken into account and there are versions with and without the breaking platform. All models have a close coupling mechanism and NEM coupler pockets. Each running number appears in an edition of 200 copies. The length over buffer is 6.5cm per car. equipped with: |
9.99 EUR*
Art.-no. MU_N-A00350
Modellbahn Union
Set of 4 small and 2 middle roller boxes. Press rollers are used to minimize the resistance of wire cables in kinked cable pull. The boxes are used to protect the Rollen.Die boxes have a Steckfuß (1mm average) which simplifies the mounting on your system.
Dimensions: 4 x 2.5 x 4 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
14.99 EUR*
Art.-no. MU_N-A00351
Modellbahn Union
2 scaled dummies of a switch lantern with drive box and 2 connection thresholds. The lanterns are printed separately and can be placed in any position on the substructure.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
14.99 EUR*
Art.-no. MU_N-A00352
Modellbahn Union
2 scaled dummies of a switch lantern with drive box and 2 connection thresholds. The lanterns are printed separately and can be placed in any position on the substructure.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00353
Modellbahn Union
5 roll holder form 1 for wire cables incl. 2 meters nylon wire of the thickness 0.14 mm for the design of the wire cables. The roll holders have a foot (2mm diameter), which simplifies mounting on the system.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00354
Modellbahn Union
5 roll holder form 2 for wire cables incl. 2 meter nylon wire of 0.14 mm thickness for the design of the wire cable lines. The roll holders have a foot (2mm diameter), which simplifies mounting on the system.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00355
Modellbahn Union
5 roll holder form 3 for wire cables incl. 2 meter nylon wire of the thickness 0.14 mm for the design of the wire cable lines. The roll holders have a foot (2mm diameter), which simplifies mounting on the system.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00356
Modellbahn Union
5 roll holder form 4 for wire cables incl. 2 meter nylon wire of thickness 0.14 mm for the design of the wire cable lines. The roll holders have a foot (2mm diameter), which simplifies mounting on the system.
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00276
Modellbahn Union
Set to try out with one channel each for 4,6,8,10 and 12 wire cables
Length: 50 mm per channel The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00277
Modellbahn Union
Set of 5 sheet metal ducts for a maximum of 4 wire cables.
Dimensions 5 pieces à 50 x 1.85 x 1mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00278
Modellbahn Union
Set of 5 sheet metal ducts for a maximum of 6 wire cables
Dimensions 5 pieces à 50 x 2.5 x 1 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00279
Modellbahn Union
Set with 5 sheet metal ducts for a maximum of 8 wire cables
Dimensions 5 pieces à 50 x 3.2 x 1 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00280
Modellbahn Union
Set with 5 sheet metal ducts for a maximum of 10 wire cables
Dimensions 5 pieces à 50 x 3.8 x 1 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00281
Modellbahn Union
Set with 5 sheet metal ducts for a maximum of 12 wire cables
Dimensions 5 pieces à 50 x 4.4 x 1 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00282
Modellbahn Union
Set of 2 deflection boxes for 4,6,8,10 and 12 wire cables, total of 10 pieces
The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00283
Modellbahn Union
Set of 10 deflection boxes for a maximum of 4 wire feeder cables
Dimensions: 2.3 x 2.3 x 1.5 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00284
Modellbahn Union
Set with 10 deflection boxes for a maximum of 6 wire feeder cables
Dimensions: 2.6 x 2.6 x 1.5 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00285
Modellbahn Union
Set with 10 deflection boxes for a maximum of 8 wire cables
Dimensions: 3,25x2,7x1,5 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00286
Modellbahn Union
Set with 10 deflection boxes for a maximum of 10 wire cables
Dimensions: 3 x 3 x 1.5 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
9.99 EUR*
Art.-no. MU_N-A00287
Modellbahn Union
Set of 10 deflection boxes for a maximum of 12 wire cables
Dimensions: 6 x 6 x 1.5 mm The highly detailed parts are made of plastic in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color). |
Yours sincerely
Daniel Mrugalski
DM-Toys