Dear customer,
here our novelties and bargains:
39.99 EUR*
Art.-no. MU_N-i00029
Modellbahn Union
Two-storey factory building with rail connection designed as a half relief. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is avoided. A straight version is available under the number N-i00030. Built in the Wilhelminian style, the high-quality engraving and multi-layered structure make it a truly outstanding three-dimensional model for use as a background backdrop. Through the gate you can take a train behind the complex. This gives you the opportunity to design something special as an exit for trains on your layout instead of a conventional tunnel. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of the hall even with an inner life such. B. our workshop equipment or other machines on. |
39.99 EUR*
Art.-no. MU_N-i00031
Modellbahn Union
Model of a reception / administration building in a mixture of Wilhelminian architecture and Art Deco. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The common problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032. The 3-storey building has printed realistic stained-glass windows replicas to enhance the effect of the building on the viewer. Reception and administration buildings of the factories were often very lavishly equipped so that the wealth of the companies was conveyed to the visitors. In our building, this is evident not only in the stained glass windows, but also in the plastered gables, the superb brick columns and the very detailed wrought-iron door. The Art Deco sconces (MU_N-A00300) can be attached to the pediment next to the ornate front door, but are not part of the kit. |
39.99 EUR*
Art.-no. MU_N-i00033
Modellbahn Union
Model of a machine hall with chimney, executed as a half relief. The model is part of our building series on the subject of Maschinenfabrik Johann, which can be combined with each other.
The building is constructed at an angle of 7 ° oblique to the straight background. The left side of the building is lower than the right side and the building is slightly diagonal to the plant background. The angular construction creates a realistic look on the layout or diorama. The problem of too many parallels (edge ??of the system, tracks and buildings) is thereby avoided. A straight version is available under the number N-i00032. The machine hall with chimney is the heart of the factory. Here stood the steam engine (later diesel and electric motors), which supplied the plant with energy. Next to the machine hall is the boiler room, from which the chimney for the removal of the combustion gases protrudes. As was often the case with machine shops, large windows are installed to ensure that not only enough light enters the hall, but visitors can also see and admire the steam engines. The steam engines were often the pride of the company. The kit contains a photo print that can be used as a background for the inside. You have the choice to stick it directly behind the windows or at the back of the building. The latter then opens up the possibility of further shaping the hall with an inner life. Likewise, a photo print with tiles for the bottom of the machine hall is included. |
14.99 EUR*
Art.-no. MU_N-L00080
Modellbahn Union
4 pavement segments with a length of 160mm each. The width of the pavement is 37.5 mm and is thus a scale reduction of a 6 meter wide street. On both sides are extra stripes on which you can glue the Modellbahn Union walkways MU_N-L00071 and MU_N-L00073. In two segments there is an opening to glue in the enclosed manhole cover.
|
14.99 EUR*
Art.-no. MU_N-L00073
Modellbahn Union
Set with sidewalk pavement. The total length of 800 mm is excluding the corner segments.
|
14.99 EUR*
Art.-no. MU_N-L00071
Modellbahn Union
Set with sidewalk pavement. The total length of 900 mm is excluding the corner segments.
|
134.99 EUR*
Art.-no. Hobbytrain_H2984
Hobbytrain
Since its launch in 2010, Siemens' Vectron has been sold to more than 300 rail companies in Europe and more new variants are added every year. Finally, the Vectron is now also available at the major railway companies DB, SBB-Cargo and ÖBB. Like the role model, the model of Hobbytrain is always kept up to date. New for the variants 2018 are the, as in the original extended rain gutter over the entrance doors (depending on the model) as well as the mirrored front windows of the doors.
Model information: - completely revised and modified version with extended gutter mirrored side windows - Next 18 interface, prepared for sound - LED red-white alternating light (red light can also be switched off analogue) - 2 traction tires, all axles driven, 2 flywheels - new revised pantographs - NEM coupler pocket with kinematics - fine and detailed printing - LÜP 122.5 mm EDITION: ART PRINT |
119.99 EUR
(RRP*)
89.99 EUR*
Art.-no. Minitrix_15421
Minitrix
Prototype: 1 EVA Uerdingen tank car, 1 G 02 freight car, 1 SSym 46 heavy-duty flat car loaded with a wooden transport box, 1 wine trolley with 3 real wood wine barrels. All cars set at the German Federal Railways.
Model: With kinematics for close coupling. Overall length over buffer 276 mm. One-time series as part of the Trix theme Gateway to the World |
215.00 EUR
(RRP*)
159.99 EUR*
Art.-no. Piko_40463
Piko
Pressure variant of the electric locomotive Rh 1200 in turquoise in Ep. III. The PIKO model of the NS 1200 is characterized by very fine engravings on the locomotive body and the bogies. A special eye-catcher are the filigree pantographs and the replica of the roof, which accurately reproduce all the details of the original. A powerful engine guarantees the problem-free transport of authentic express trains. The model has a Next18 interface and the usual red / white light change. The cab lighting is digitally switchable. In addition, two wheels were provided with traction tires in a diagonal arrangement with traction tires. The PIKO model has excellent running properties and can easily pass through radii down to 192 mm.
|
19.99 EUR*
Art.-no. Kato_10916-25
Kato
Newest version of the replacement board with NEM 651 interface suitable for all TGV + TGV duplex from Kato incl. Dummy plug for analogue operation
|
19.99 EUR*
Art.-no. Kato_10916-35
Kato
Newest version of the replacement board with NEM 651 interface suitable for all TGV + TGV duplex from Kato incl. Dummy plug for analogue operation
|
34.11 EUR*
Art.-no. Auhagen_14483
Auhagen
Single-track, straight. Headroom 47mm. Passage width Bridge 164 mm, Vorflutbrücken right / left 92mm each
Due to 2 drainpipe bridges with underlying carriageway, 1 arch bridge and an additional center pillar, a modular design is possible. Extendable with a second kit. The position of the wing walls can be designed in several variants. |
30.15 EUR*
Art.-no. Auhagen_14484
Auhagen
From epoch II:
2 service or snack buildings including gutters, 1 direction indicator, 4 benches with attachment for advertising, 1 well, 2 phone booths, 4 timetables as well as appropriate decoration. Building 41 x 21 x 20 mm |
9.81 EUR*
Art.-no. Auhagen_44647
Auhagen
Over 380 signal boards and railroad signs of the Deutsche Reichsbahn as well as logos of the German Federal Railways with columns.
|
12.15 EUR*
Art.-no. Auhagen_44648
Auhagen
8 mast lamps height 34 mm and 4 wall lamps projection 11 mm - no function
|
9.90 EUR*
Art.-no. Artitec_316.039
Artitec
assembled and painted |
22.40 EUR*
Art.-no. Artitec_316.050
Artitec
Ready-made |
26.90 EUR*
Art.-no. Artitec_316.070
Artitec
Material: Handpainted Resin and / or Etched Parts
Handarbeits small series model, ready painted and assembled |
10.99 EUR*
Art.-no. Artitec_316.05
Artitec
assembled and painted
|
26.95 EUR
(RRP*)
19.99 EUR*
Art.-no. Herpa_066778
Herpa
Markent yellow containers for storage purposes are leased by Elbtainer Storage, headquartered in Hamburg. The company has eight branches between Hamburg and Munich.
|
Yours sincerely
Daniel Mrugalski
DM-Toys