N-Scale 01/2018: REE, Fleischmann & Modellbahn Union

5.99 EUR^*

Art.-no. MU_N-A00035

Modellbahn Union

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

9.99 EUR^*

Art.-no. MU_N-A00045

Modellbahn Union

The highly detailed parts are made of resin in the 3D printing process and graphics board in the laser cut process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

7.99 EUR^*

Art.-no. MU_N-A00231

Modellbahn Union

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

5.99 EUR^*

Art.-no. Deluxe_AD29

Deluxe Materials

Wax adhesive for holding miniatures in place whilst allowing re-positioning.

6.99 EUR^*

Art.-no. Deluxe_BD33

Deluxe Materials

These ice crystals create the impression of frozen, sparkling snow.

6.99 EUR^*

Art.-no. Deluxe_AD21

Deluxe Materials

The thin, non-fuming cyano alternative.

• Low odour, water clean up.
• Penetrates much further than other glues.
• Provides better joints on balsa, ply, GRP, plastic hinges, foam and carbon fibre.

Some of the many uses:

• Pin & glue balsa & hardwood.
• Bonds plastic hinges.
• Bonds carbon fibre & foam.

7.99 EUR^*

Art.-no. Deluxe_AD57

Deluxe Materials

For fast assembly of card models eg. railway buildings and rockets.

Also bonds balsa wood, paper and card to most plastics. Use sparingly, align and press parts together for instant bond. Water clean up.

36.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_867406

Fleischmann

Measuring cars of the Federal Railway Research Institute Minden, German Federal Railways (DB), epoch IV.

Prototypically painted and labeled. Used windows. Equipped with interior fittings, interior lighting can be retrofitted. Coupler pocket according to NEM 355 with close-coupling link.

The Federal Railway Research Station in Minden, Westphalia, also used former pre-war express cars in its fleet. Since these vehicles were classified as railway service vehicles, some of them were painted yellow.

59.50 EUR^*

Art.-no. Fleischmann_507460

Fleischmann

84.00 EUR (RRP*)

19.99 EUR^*

Art.-no. Fleischmann_389541

Fleischmann

84.00 EUR (RRP*)

19.99 EUR^*

Art.-no. Fleischmann_389542

Fleischmann

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-095

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-096

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-097

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-098

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-099

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-100

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-101

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

55.90 EUR (RRP*)

39.99 EUR^*

Art.-no. REE_NW-102

REE Models

The wagon has a short coupling kinematics KKK. The containers are removable and very fine printed.

24.99 EUR^*

Art.-no. Artitec_316.057

Artitec

assembled and painted

12.82 EUR^*

Art.-no. Busch_8341

Busch

3.29 EUR^*

Art.-no. Schoenwitz_01-01-04-01

Schönwitz

With this LED you do not need complicated lighting controls. The LED already has a controller integrated. This ensures that the LED flashes and flashes in many different colors. Everything in one LED!

For the example video Musikexpress 4 of these LEDs were used.

Technical specifications:
Number - 1 piece
Luminous colors - red, blue, green, purple, white, turquoise and yellow
LED diameter - 5mm
Connection to 12-16V DC (resistor included)

To operate on AC voltage (light output of a standard model railroad transformer), you must connect a rectifier module in front of the LED.

3.29 EUR^*

Art.-no. Schoenwitz_11-02-01-13

Schönwitz

This bistable relay is great for model railroaders due to the wide voltage range of the input coils.

Signal relay bistable with 2 changeover contacts 2A.

Technical specifications:
Type - Signal relay
Type - Printmounting
Version - 2 changers
Technology - bistable, 2 wick.
Switching voltage, max. - 250 VAC
Switching voltage, max. - 220 VDC
Rated load - 3A / 30V DC
Rated load - 1A / 125V AC
Switching capacity, max. - 125 VA / 90W
Internal resistance (Ri) - 960 ohms
Test voltage - 1500 VAC
Coil voltage - 9V-24V DC
Power consumption (operation) - 0.2 W
Switching current, max. - 2 A
Washable - RT III (IP67)
Contacts - Ag-AuAG8 / AgPd60
Approval - UL
Length - 20.2 mm
Width - 10.2 mm
Height - 10.6 mm

4.39 EUR^*

Art.-no. Schoenwitz_04-09-01

Schönwitz

Very cheap tweezers assortment, consisting of four different approx. 110 mm long stainless tweezers.

Delivery:
1 piece - pointed tweezers - straight
1 piece - pointed tweezers - bent
1 piece - flat tweezers - curved
1 piece - cross tweezers

9.99 EUR^*

Art.-no. Schoenwitz_04-03-03

Schönwitz

Ideal for all filigree work, where you need both hands to work.

Dates:
Heavy cast iron stand
8 ball joints
2 movable clamps
2x magnification
46mm real glass lens

8.79 EUR^*

Art.-no. Schoenwitz_04-03-05

Schönwitz

With this inexpensive entry-level model, you can purchase an all-rounder for all hobby and laboratory soldering tasks.

Delivery:
Soldering iron FLK-30 incl. Soldering tip
operation manual

Technical specifications:
Safety Knife guard
Operation on - 230V
Power - 30W
Short heat-up time
Heat-resistant cable -1,3m

Product picture differing, the soldering device is delivered without stand.

9.89 EUR^*

Art.-no. Schoenwitz_04-03-16

Schönwitz

The battery soldering iron is immediately ready for use due to its very short heating time of less than 15 seconds.

Supplied with protective cap (prevents accidental activation)
Longlife soldering tip
about 4g solder in the dispenser
Operating voltage 4.5V
Power 8W
Heating-up time / cooling time: <15 sec. / 30 sec.
Powered by 3x Mignon (AA) batteries (not included)
Working time: about 1 hour with a new set of batteries
Dimensions L x W x D: approx. 180 incl. Tip x 38 x 20 mm. Weight 30 g (without batteries)

5.05 EUR^*

Art.-no. Schoenwitz_05-01-01

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-02

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-03

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-04

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-05

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-06

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-07

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-08

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-09

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-01-10

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0,14mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-01

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for the wiring of LEDs. This offer is valid for a roll 0,05mm² 25m in the above mentioned color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-02

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-03

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-04

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-05

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-06

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-07

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-08

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-09

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

5.05 EUR^*

Art.-no. Schoenwitz_05-03-10

Schönwitz

Quality cable from a German manufacturer. Supplied on a sturdy plastic bobbin. This cable has already proven itself many times. It has excellent processing properties and is ideal for use in the modeling industry, eg for wiring LEDs.

This offer is valid for a roll 0.05mm² 25m in the above color.

1.64 EUR^*

Art.-no. Schoenwitz_09-01-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-01-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-03-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-03-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-04-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-04-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-05-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-05-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-06-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-07-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-08-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-08-02

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 1.2mm
Diameter after shrinkage - 0.4mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.40 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay

1.64 EUR^*

Art.-no. Schoenwitz_09-09-01

Schönwitz

Thin walled multipurpose shrink tubing - ideal for LEDs, resistors and thin strands.

The heat shrink tubing is due to its very good chemical, mechanical and electrical
Properties intended for professional use. It guarantees perfect electrical insulation and provides protection against corrosion and mechanical stress.

Supplied with 1 meter heat shrink tube, pre-cut in 10 pieces á 10cm.

Technical specifications:
Material - radiation crosslinked polyolefin
Diameter before shrinkage - 2,4mm
Diameter after shrinking - 1,2mm
Shrinkage Ratio - 2: 1
Wall thickness after shrinkage. - 0.5 mm
Shrinking temperature -> 110 ° C
Longitudinal shrinkage - max. 10%
Operating temperature - -55 ° C to + 135 ° C
Tensile strength - 15.0 MPa min (ISO 37)
Flammability - self-extinguishing
Dielectric strength - = 24 kV / mm
Tested acc. - UL224, CSA 400-U-9
High resistance to - acids, alkalis, cleaning fluids, fuels, oils, salt water, fungus and decay