N-Scale 01/2018: Modellbau Schoenwitz

179.90 EUR (RRP*)

89.99 EUR^*

Art.-no. Arnold_HN2298

Arnold

35.15 EUR^*

Art.-no. Piko_60011

Piko

plastic kit, dimension 124 x 94 x 43

35.15 EUR^*

Art.-no. Piko_60012

Piko

55.10 EUR^*

Art.-no. Piko_60015

Piko

plastic kit, dimension 150 x 98 x 66

55.10 EUR^*

Art.-no. Piko_60027

Piko

plastic kit, dimension 150 x 98 x 66

4.99 EUR (RRP*)

2.99 EUR^*

Art.-no. Revell_04033

Revell

Einzelteile: 58 Länge: 101 mm Spannweite: 70 mm

Dassault Rafale M 04033 Die Dassault Rafale ist weltweit das beste Kampfflugzeug, das gleichzeitig Bodenziel- und Luftverteidigungsaktionen durchführen kann. Sie erreicht eine Höchstgeschwindigkeit von Mach 2. Die erste Serienmaschine der Rafale M ist seit 1999 bei der französischen Marine in Dienst gestellt.

- Authentische Oberflächenstrukturen, versenkte Blechstöße
- Detailliertes Fahrgestell
- Pylonen für Außenlasten
- MICA- und Magic-Lenkwaffen
- Zusatztanks
- Abziehbilder mit 2 Versionen (Prototyp und Serienmaschine)

9.99 EUR (RRP*)

2.99 EUR^*

Art.-no. Revell_64037

Revell

Einzelteile: 36 Länge: 52 mm Spannweite: 94 mm

Der F-117 A ist das erste einsatzfähige Tarnkappenflugzeug der Welt und befindet sich seit 1983 im Einsatz bei der USAF. Total sind ca. 50 dieser von Radar schwer erfassbaren Jäger biem 37th. TFW in Tonapah, Nevada stationiert.

Zum Modell:
- Strukturierte Oberfläche
- V-Seitenleitwerk
- Fahrwerk wahlweise ein- oder ausgefahren
- Abziehbilder der USAF

Warnungen:
Konservierungsmittel, Preservatives, Agents de préservation: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE,BENZISOTHIAZOLINONEAchtung! Nur für Kinder über 8 Jahren. Benutzung unter Aufsicht von Erwachsenen.Lösungsmittelhaltiger Kleber enthalten.

12.49 EUR (RRP*)

1.99 EUR^*

Art.-no. Revell_64904

Revell

Die EA-18G Growler wird von der US Navy als Störflugzeug zur elektronischen Kriegsführung eingesetzt und ersetzt die EA-6B Prowler. Ihre Aufgabe ist es gegnerische Kommunikations- und Radareinrichtungen zu überwachen und anzugreifen. Für die Bekämpfung von Radarstationen verfügt sie über HARM- Lenkwaffen.

Einzelteile: 63 Länge: 127mm Spannweite: 93mm

Das Modell:

- Detaillierte Oberflächen mit versenkten Blechstößen
- Zweisitzer-Cockpit mit Schleudersitze
- Detailliertes Fahrwerk
- 6 Tragflächenpylone und Rumpfpylon
- 2 ALQ-99 Störbehälter
- 2 ALQ-218 Receiverpods
- 2 AIM-9x-Lenkwaffen
- 2 Zusatztanks

- Authentische Abziehbilder für folgende Version:
- EA-18G Growler NL 540 BuNo. 166894 VAQ-132 Scorpions , Operation Odyssey Dawn - Aviano AB - Lybia. March 2011

Model-Set inkl. 3 Farben, 1 Pinsel und 1 x Klebstoff

Warnungen:
Konservierungsmittel, Preservatives, Agents de préservation: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE,BENZISOTHIAZOLINONEAchtung! Nur für Kinder über 8 Jahren. Benutzung unter Aufsicht von Erwachsenen.Lösungsmittelhaltiger Kleber enthalten.

19.79 EUR^*

Art.-no. Schoenwitz_01-03-18-01

Schönwitz

Connection of signals with the associated track holding sections in a very clear manner. Specially designed for C-Digital. Three LEDs indicate the current state and an ongoing switching activity.

Dates:
Voltage -10-16V AC / 12-15V DC
Current consumption - approx. 10mA
Load capacity switching contacts - 2A
Compatible with C-Digital
Ready assembled with a detailed guide

15.39 EUR^*

Art.-no. Schoenwitz_01-03-21-02

Schönwitz

The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or disco. With this product you can put your models in the right place.

Technical specifications:
Number of LEDs - 18 pieces
Distance of the LEDs - 10mm
Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section.
Current consumption - approx. 10mA
Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm)
Separating points - 2 pieces after each 6 LEDs
Connection cable - approx. 200mm long

The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off.

The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction.

The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom.

15.39 EUR^*

Art.-no. Schoenwitz_01-03-21-04

Schönwitz

The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or disco. With this product you can put your models in the right place.

Technical specifications:
Number of LEDs - 18 pieces
Distance of the LEDs - 10mm
Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section.
Current consumption - approx. 10mA
Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm)
Separating points - 2 pieces after each 6 LEDs
Connection cable - approx. 200mm long

The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off.

The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction.

The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom.

15.39 EUR^*

Art.-no. Schoenwitz_01-03-21-05

Schönwitz

The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or disco. With this product you can put your models in the right place.

Technical specifications:
Number of LEDs - 18 pieces
Distance of the LEDs - 10mm
Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section.
Current consumption - approx. 10mA
Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm)
Separating points - 2 pieces after each 6 LEDs
Connection cable - approx. 200mm long

The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off.

The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction.

The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom.

15.39 EUR^*

Art.-no. Schoenwitz_01-03-21-06

Schönwitz

The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or disco. With this product you can put your models in the right place.

Technical specifications:
Number of LEDs - 18 pieces
Distance of the LEDs - 10mm
Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section.
Current consumption - approx. 10mA
Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm)
Separating points - 2 pieces after each 6 LEDs
Connection cable - approx. 200mm long

The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off.

The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction.

The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom.

15.39 EUR^*

Art.-no. Schoenwitz_01-03-21-07

Schönwitz

The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or disco. With this product you can put your models in the right place.

Technical specifications:
Number of LEDs - 18 pieces
Distance of the LEDs - 10mm
Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section.
Current consumption - approx. 10mA
Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm)
Separating points - 2 pieces after each 6 LEDs
Connection cable - approx. 200mm long

The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off.

The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction.

The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom.

15.94 EUR^*

Art.-no. Schoenwitz_04-03-04

Schönwitz

Easy-flowing electronic soldering tin for laboratory and hobby applications.
The SMD solder wire with a diameter of 0.5 mm is specially designed for the smallest SMD solder joints.

Dates:
Tin content - 97%
Copper content - 1%
Flux content - 2%
Diameter - 0.5mm
Weight - 100g roll
Solder wire length ca - 30 meters

8.79 EUR^*

Art.-no. Schoenwitz_04-03-06

Schönwitz

Silver conductive ink with very good adhesion. Ideal for repairing circuit boards, window alarm loops, window heating or invisibly "wiring" LEDs to model figures.

Due to the new regulations, we supply this paint together with the package leaflet "DIN safety data sheet"

Supplied in glass bottles and self-service packaging
Very good conducting - approx. 0.02 ohms - 0.1 ohms / cm²
Weight - about 3g
Content - about 2 ml

5.49 EUR^*

Art.-no. Schoenwitz_04-03-07

Schönwitz

This acid-free flux is suitable for soldering small solder joints as well as for large-area tinning.

Because of its high temperature range of up to 400 ° C, the soldering honey is ideally suited in combination with lead-free solder. The solder honey does not burn, which is why there are no oxidation residues.

Soldering with non-ferrous metals such as B. Brass is enormously relieved without pretreatment by the solder honey. The soldering process is quicker and cleaner and is easy on your nerves. :-).

Soldering honey complies with the current RoHS directive and directive 2006/122 / EC.

Scope of delivery: - A tube with 7.5 g

2.19 EUR^*

Art.-no. Schoenwitz_04-03-14

Schönwitz

Delivered in a convenient dispenser, for the occasional home-style soldering at a bargain price.

Technical specifications:
Diameter solder - 1,0mm
Content weight - 12g
Unleaded - no

3.29 EUR^*

Art.-no. Schoenwitz_04-03-19

Schönwitz

Easy-flowing electronic soldering tin for laboratory and hobby applications.
The SMD solder wire, with a diameter of 0.5 mm, is specially designed for the smallest SMD solder joints.

Dates:
Tin content - 99.3%
Copper content - 0.7%
Diameter - 0.5mm
Weight - 10g roll
Solder wire length ca - 2 meters

ATTENTION! Product photo not up-to-date, new batch will be delivered in dispenser bar and no longer on roll!

3.29 EUR^*

Art.-no. Schoenwitz_04-03-21

Schönwitz

For radial resistors, diodes, chokes, capacitors and electrolytic capacitors.
For five grid sizes: 7.5 / 10 / 12.5 / 15 / 17.5 mm.

The turn-off device is a useful helper in the workshop.

Delivery without illustrated resistors.

4.39 EUR^*

Art.-no. Schoenwitz_04-09-02

Schönwitz

Small version made of plastic with 3 spring arms, for holding or holding screws, nuts, etc. in inaccessible places. Suitable for many work in electronics and model making.

Technical specifications:

Length - 115mm
Diameter - 7mm
Number of gripper arms - 3

4.39 EUR^*

Art.-no. Schoenwitz_04-09-04

Schönwitz

Up to 470 mm extendable, pushed together about 125mm long, ideal for professional applications. Chromed with clip - inserted no longer than a pen.

10.99 EUR^*

Art.-no. Schoenwitz_05-04-01-01

Schönwitz

Wire end sleeves - insulated, for the clean end termination of flexible stranded ends. 400 pieces sorted in a convenient withdrawal box.

Content:
50 pieces - 0.5 mm²
100 pieces - 0.75 mm²
100 pieces - 1.0 mm²
100 pieces - 1.5 mm²
50 pieces - 2.5 mm²

13.19 EUR^*

Art.-no. Schoenwitz_05-04-01-02

Schönwitz

Ferrules - not insulated, for the clean termination of flexible stranded ends. 1900 pieces sorted in a handy withdrawal box.

Content:
500 pieces - 0.5 mm²
500 pieces - 0.75 mm²
400 pieces - 1.0 mm²
300 pieces - 1.5 mm²
200 pieces - 2.5 mm²

43.99 EUR^*

Art.-no. Schoenwitz_11-05-04-01

Schönwitz

This extensive LED set also includes the matching accessories. The 4 different resistance values ??are used for connection to higher voltages (eg 12V = 560 ohms or 19V = 1 KOhm) and for brightness regulation. The shrink tubing is needed to insulate the two LED pins. The diameter was chosen appropriately. The thinner 1.2 / 0.6 are for the pin to which only the connection cable was soldered. The stronger 2.4 / 1.2er is for the pin to which the resistor and lead were soldered.

These 2mm long-head tower LEDs (head length 4.5mm) can be used in a variety of ways (eg RC model making, model railroading, in the car ... etc.). The colorful range is also ideal for beginners to experiment.

On the inside of the lid you will find a table of contents and the most important technical data. In addition, there is still an aid for determining the resistance value based on the color rings / color coding.

content selection

LEDs
20 pieces - Tower LED 2mm - red
20 pieces - Tower LED 2mm - yellow
20 pieces - Tower LED 2mm - green
10 pieces - Tower LED 2mm - blue
10 pieces - Tower LED 2mm - cool white
10 pieces - Tower LED 2mm - warm white

equipment
30 pieces - shrink tubing 2,4 / 1,2 black 6cm
30 pieces - shrink tubing 1.2 / 0.6 black 6cm
50 pieces - metal film resistors 0207 - 1% - 560 ohms
50 pieces - metal film resistors 0207 - 1% - 1 KOhm
50 pieces - metal film resistors 0207 - 1% - 4.7 KOhm
50 pieces - metal film resistors 0207 - 1% - 10 KOhm

0.65 EUR^*

Art.-no. Schoenwitz_11-16-02-01

Schönwitz

These connectors are characterized by an extremely compact design. The two contacts are arranged in 1mm pitch.

Ideal to realize a subtle power transmission between two passenger cars.

The plug is delivered plugged into the socket.

Technical specifications
Pitch: 1.0mm
Number of poles: 2
Type: plug + socket
Current: max. 0.75A Insulation resistance: min. 1000 MOhm withstand voltage: up to 500V AC Contact Material: Bronze Insulation material: Polyester Contact resistance: max. 30 MOhm

0.98 EUR^*

Art.-no. Schoenwitz_11-16-02-02

Schönwitz

These connectors are characterized by an extremely compact design. The three contacts are arranged in 1mm pitch.

Ideal to realize a subtle power transmission between two passenger cars.

The plug is delivered plugged into the socket.

Technical specifications
Pitch: 1.0mm
Number of poles: 3
Type: plug + socket
Current: max. 0.75A
Insulation resistance: min. 1000 MOhm
Voltage-proof: up to 500V AC
Contact Material: Bronze
Insulation material: polyester
Contact resistance: max. 30 MOhm

1.09 EUR^*

Art.-no. Schoenwitz_11-16-02-03

Schönwitz

These connectors are characterized by an extremely compact design. The four contacts are arranged in 1mm pitch.

Ideal to realize a subtle power transmission between two passenger cars.

The plug is delivered plugged into the socket.

Technical specifications
Pitch: 1.0mm
Number of poles: 4
Type: plug + socket
Current: max. 0.75A
Insulation resistance: min. 1000 MOhm
Voltage-proof: up to 500V AC
Contact Material: Bronze
Insulation material: polyester
Contact resistance: max. 30 MOhm

8.79 EUR^*

Art.-no. Schoenwitz_15-02-01-01

Schönwitz

Ideal for all modellers / model railroaders and all other hobbyists. Wherever LEDs or incandescent bulbs can not be used because of their size or heat development, optical fibers are used. Light where you want it.

The special feature of this product is that the light does not only exit at the end but also radiates laterally. The product photos show an application example with powerful 5mm LED with a clear lens.

You can only see the full effect in the dark and with a suitable light source.

characteristics

Length - 2 meters
Diameter - 1.5mm
High quality fiber optics
PMMA plastic light guide
very flexible and deformable
no heat development at the light exit
With a light source, multiple optical fibers can be supplied.
Ideally, separate with a sharp cutter.

The product photos show an example with a 3mm optical fiber. The light sources are not included

9.89 EUR^*

Art.-no. Schoenwitz_15-02-01-02

Schönwitz

Ideal for all modellers / model railroaders and all other hobbyists. Wherever LEDs or incandescent bulbs can not be used because of their size or heat development, optical fibers are used. Light where you want it.

The special feature of this product is that the light does not only exit at the end but also radiates laterally. The product photos show an application example with powerful 5mm LED with a clear lens.

You can only see the full effect in the dark and with a suitable light source.

characteristics

Length - 2 meters
Diameter - 2.0mm
High quality fiber optics
PMMA plastic light guide
very flexible and deformable
no heat development at the light exit
With a light source, multiple optical fibers can be supplied.
Ideally, separate with a sharp cutter.

The product photos show an example with a 3mm optical fiber. The light sources are not included

10.99 EUR^*

Art.-no. Schoenwitz_15-02-01-03

Schönwitz

Ideal for all modellers / model railroaders and all other hobbyists. Wherever LEDs or incandescent bulbs can not be used because of their size or heat development, optical fibers are used. Light where you want it.

The special feature of this product is that the light does not only exit at the end but also radiates laterally. The product photos show an application example with powerful 5mm LED with a clear lens.

You can only see the full effect in the dark and with a suitable light source.

characteristics

Length - 2 meters
Diameter - 2.5mm
High quality fiber optics
PMMA plastic light guide
very flexible and deformable
no heat development at the light exit
With a light source, multiple optical fibers can be supplied.
Ideally, separate with a sharp cutter.

The product photos show an example with a 3mm optical fiber. The light sources are not included

12.09 EUR^*

Art.-no. Schoenwitz_15-02-01-04

Schönwitz

Ideal for all modellers / model railroaders and all other hobbyists. Wherever LEDs or incandescent bulbs can not be used because of their size or heat development, optical fibers are used. Light where you want it.

The special feature of this product is that the light does not only exit at the end but also radiates laterally. The product photos show an application example with powerful 5mm LED with a clear lens.

You can only see the full effect in the dark and with a suitable light source.

characteristics

Length - 2 meters
Diameter - 3.0mm
High quality fiber optics
PMMA plastic light guide
very flexible and deformable
no heat development at the light exit
With a light source, multiple optical fibers can be supplied.
Ideally, separate with a sharp cutter.

The product photos show an example with a 3mm optical fiber. The light sources are not included

2.19 EUR^*

Art.-no. Schoenwitz_01-03-13-02

Schönwitz

This LED bulb replaces conventional bulbs with an MS4 socket.

2.19 EUR^*

Art.-no. Schoenwitz_01-03-13-04

Schönwitz

This LED illuminant replaces conventional incandescent bulbs with a BA5S mating thread (such as Mä. 600150), which are used extensively in the model building sector.

Just replace it with the bulb and you're done! The topic of heat generation is very important, especially in narrow houses or wagons. The LED bulbs produce almost no waste heat and the power consumption is only one tenth as high as with conventional incandescent bulbs. The lifetime is also great
longer, because the LED bulbs have a life expectancy of about 100,000 hours.

Important!
All of our LED bulbs have a small board in the socket installed, on which there is a real bridge rectifier with a sufficiently dimensioned LED resistor.
Thus, the LED is suitable for DC and AC voltage, works flicker-free and lights up even with reverse polarity (important for the analog DC operation, otherwise the locomotive is always dark in one direction).

Possible applications:
street lights
Lighting socket for houses
locomotives
wagons
cribs lighting

Technical specifications:
Voltage - 12V to 22V DC or AC
Electricity - about 15mA
Luminous color - cool white
Socket - BA5S jack (2 nipples / latches on the side)
Dimensions approx. (Height / diameter) - 12mm / 5mm

2.19 EUR^*

Art.-no. Schoenwitz_01-03-13-05

Schönwitz

This LED illuminant replaces conventional incandescent bulbs with a BA5S mating thread (such as Mä. 600150), which are used extensively in the model building sector.

Just replace it with the bulb and you're done! The topic of heat generation is very important, especially in narrow houses or wagons. The LED bulbs produce almost no waste heat and the power consumption is only one tenth as high as with conventional incandescent bulbs. The lifetime is also great
longer, because the LED bulbs have a life expectancy of about 100,000 hours.

Important!
All of our LED bulbs have a small board in the socket installed, on which there is a real bridge rectifier with a sufficiently dimensioned LED resistor.
Thus, the LED is suitable for DC and AC voltage, works flicker-free and lights up even with reverse polarity (important for the analog DC operation, otherwise the locomotive is always dark in one direction).

Possible applications:
street lights
Lighting socket for houses
locomotives
wagons
cribs lighting

Technical specifications:
Voltage - 12V to 22V DC or AC
Electricity - about 15mA
Luminous color - warm white
Socket - BA5S jack (2 nipples / latches on the side)
Dimensions approx. (Height / diameter) - 12mm / 5mm

3.29 EUR^*

Art.-no. Schoenwitz_01-03-13-11

Schönwitz

This LED bulb replaces conventional incandescent bulbs with an MS4 jack, as used extensively in model making.

Just replace it with the bulb and you're done! The topic of heat generation is very important, especially in narrow houses or wagons. The LED bulbs produce almost no waste heat and the power consumption is only one tenth as high as with conventional incandescent bulbs. The lifetime is also great
longer, because the LED bulbs have a life expectancy of about 100,000 hours.

Important!
All of our LED bulbs have a small board in the socket installed, on which there is a real bridge rectifier with a sufficiently dimensioned LED resistor.
Thus, the LED is suitable for DC and AC voltage, works flicker-free and lights up even with reverse polarity (important for the analog DC operation, otherwise the locomotive is always dark in one direction).

Possible applications:
street lights
Lighting socket for houses
locomotives
wagons
cribs lighting

Technical specifications:
Voltage - 12V to 22V DC or AC
Electricity - about 15mA
Luminous color - cool white
Socket - Socket - MS4
Dimensions approx. (Height / diameter) - 12mm / 5mm

42.90 EUR^*

Art.-no. Schoenwitz_01-01-03-24

Schönwitz

With this small and ingeniously sophisticated module, you can intelligently control your Car System emergency vehicles. You can expect a large application area with many functions. Due to the large voltage range, you can operate the module with only one rechargeable cell as well as with LiPo rechargeable batteries.

Automatic operational trips
For the police forces and fire brigade an everyday situation: Alarm! Immediately take the emergency vehicles on their way to the accident on, blue light and siren are activated. Arriving at the destination, the scene of the accident is secured: hazard warning lights ensure attention, and work lights on the roof illuminate the scene of the accident. As even the hardest use will eventually come to an end soon all lighting options will be disabled in turn. Now only the drive home to the guard follows. Use finished!

The MB2 module also makes such scenarios possible for Car System vehicles. Built into a model, the board works like a brain in the vehicle: All components such as motor, reed contact, speakers and of course the lighting are connected to the module, with a microprocessor on the board regulates the program sequences.

In addition to automatic operations with sound support, smaller details were also realized. When stopping at a stop, the tail lights light up briefly and work as a brake light. Then the vehicle accelerates slowly to maximum speed. Even afterglow when switching off the hazard warning lights is simulated by quickly dimming down the LEDs!

Integrated sensors control the vehicle
With two small magnets under the road surface, the module is able to start duty rides, break them off prematurely or switch the hazard warning lights and work lights on arrival at an accident site. A small but intelligent magnetic field sensor is included for detecting the magnets. This sensor can not only detect magnetic fields, but also knows to distinguish between their polarity (north or south). Thus, the one magnetic pole is used to start the blue light and the sound generator or switch off again when driving over again (false alarm) with the other pole simulating the stop at the place of use: The vehicle stops and turns on the hazard warning lights and the work lights for securing the accident site. After a set period of time, all the lights go out and the vehicle starts to drive slowly. Use finished!

No stop points or control units need to be mounted. The two included magnets are sufficient for realistic use.

Possible LED connections
Up to 20 LEDs can be connected directly to the module:

The following outputs are available:
Two white LEDs for use as headlamps
Six yellow hazard warning lights
Six fast double strokes with their own timing
Two synchronous Triblitzer for the realization of front lights
Four taillights or brake lights

Only for the connection of the work lights external resistors are necessary. An adapter board with suitable resistors for four white LEDs is available as an option.

The module already works from one volt. Thus, in addition to small vehicles and stand models can be operated with a single battery.

Siren or siren?
For sound generation, a small speaker can be connected to the module. The microprocessor generates a sound signal if the blue light is active.

There are two sounds to choose from:
A classic siren, alternating a high and a low tone, is usually active.
If a solder bridge is placed on the back of the board, the module will generate a wahing horn. This option is especially interesting for emergency vehicles from abroad.

Technical specifications:

Dimensions - 14.4 x 16.2 x 1.9 mm
Input voltage - 1 to 5 volts
Output voltage - 3.7 volts

Delivery:
MB2 function block
magnetic field sensor
Miniature speaker
2 pieces - Neodymium magnets
Description / installation instructions

The illustrated models with lighting and installation examples are not included.

6.59 EUR^*

Art.-no. Schoenwitz_01-01-03-26

Schönwitz

To operate LEDs, a voltage of about 2V is necessary, with white and blue LEDs even about 3V.

This module allows the operation of LEDs on only one or two rechargeable battery cells in a range of 0.9V to 2.6V.

Please note that the voltage input 1.2V unlike the 2.4V input is not reverse polarity protected.
We recommend for trouble-free operation max. 4 LEDs at the output. More are possible depending on the circuit type and LED.

You have the option of operating on the converter output LEDs in series, parallel or in a mixed circuit, such as two red LEDs in series // to two white LEDs in series. In a series circuit, it is not recommended to mix LEDs of different colors.

Technical specifications
Prefab module with connection cable
Output current: approx. 12mA
IC Type: PR4401 Prema LED driver
Board dimensions (L x W x H): 10 x 7.5 x 3.5mm
Length of connection cable: 100mm
Voltage input RED: from 0.9V to 1.9V
Voltage input LILA: from 1.6V to 2.6V

4.39 EUR^*

Art.-no. Schoenwitz_01-01-03-27

Schönwitz

To operate LEDs, a voltage of about 2V is necessary, with white and blue LEDs even about 3V.

This module allows the operation of LEDs on only one or two rechargeable battery cells in a range of 0.9V to 2.6V.

Please note that the voltage input 1.2V unlike the 2.4V input is not reverse polarity protected.
We recommend for trouble-free operation max. 4 LEDs at the output. More are possible depending on the circuit type and LED.

You have the option of operating on the converter output LEDs in series, parallel or in a mixed circuit, such as two red LEDs in series // to two white LEDs in series. In a series circuit, it is not recommended to mix LEDs of different colors.

Technical specifications
Single board without connection cable
Output current: approx. 12mA
IC Type: PR4401 Prema LED driver
Board dimensions (L x W x H): 10 x 7.5 x 3.5mm
Voltage input RED: from 0.9V to 1.9V
Voltage input LILA: from 1.6V to 2.6V

21.99 EUR^*

Art.-no. Schoenwitz_01-03-03-46

Schönwitz

This little technical wonder is only 22x16mm and a real all-rounder.

Universally applicable for model or model railroad lighting, the MBM-B1 is well prepared.

The module has many predefined programs, so you do not have to set them up first. A program is however freely configurable.

The adjustable options are:
Order: L - R or L - R - L
Number of pulses: 1 - 10
Pause between pulses 1ms - 5s
Pulse length 10ms - 1s
Pause after a pulse sequence 1ms - 1s

Due to the numerous adjustment options, the small effect module from the police car or fire brigade to the position light of a quad copter can illuminate everything with the right lighting effect.

The size and weight of the board are kept very low, so the use should be possible in almost all models.

An overview of the basic programs:
1. Police LED1 fast (triple flash) - LED2 slow (single flash) (fixed setting)
2. Customizable mode (reciprocal)
- Customizable (menu items 2 - 6): (2) order (3) number,
(4) Pause between flashes, (5) Flash length, (6) Pause after flash
3. Official Police Flash Sequence - Mutual - (Setting Fixed)
4. ambulance (1 flash with break) mutually - customizable
- Customizable (menu items 4, 6): (4) Pause between flashes, (6) Pause after flash
5. Fire Department (3 flashes with break) (setting fixed)
6. US Police (6 flashes with break) customizable break
- Customizable (menu item 6): Pause after a flash
7. directional flashing light: both LEDs together 400ms / 400ms (fixed setting)
8. Faster reverse turn signal 300ms / 300ms (fixed setting)
9. Slow flashing light 500ms / 800ms (fixed setting)
10. Slow Blinking 50ms / 800ms (setting fixed)
11. Position Speed ??camera - very slow flashing 20ms / 1.5sec (fixed setting)
12. Slow change indicator 1.5sec / 1.5sec (fixed setting)
13. Very slow change indicator 1sec / 3sec (fixed setting)

The complete control takes place via 3 buttons on the module.
The settings are stored for over 20 years.

For installation or selection of the right program, the module has additional functions.
You can put the module in demo mode with a small key press.
Another combination will give you the lamp test mode.
A diagnosis of the lighting or its installation are thus considerably simplified.

This module is ideal for purposes such as:
lighting effects
Running lights
warninglight
Case modding
advertising effects
light objects
billboards
Model / model trains

Technical specifications:
Type: MBM-B1
Total output with LEDs: 500 mA
Total output for incandescent lamps: 200 mA
Speed: finely adjustable
Indicator lights: 2 white function LEDs
Reverse polarity protection at the entrance: yes
Input voltage: 7 - 30 volts DC / 7 - 21 volts AC
Output voltage: DC - 0.75 volts of input voltage
Heat: almost no heat
Memory: saves the setting
Settings: fully configurable
Programs: 13 programs, 3 of which are freely adjustable
Additional functions: lamp test and demo mode
Pulse duration (flash duration): adjustable 10 - 1000 ms
Power consumption circuit: 5-10 mA
Weight: approx. 2.8g
Dimensions (H / W / D): 12 mm x 22 mm x 16 mm
PCB connector: RM 2,54 (servo connector)
made in: Germany

27.49 EUR^*

Art.-no. Schoenwitz_01-03-03-47

Schönwitz

This little technical wonder is only 22x16mm and a real all-rounder.

Especially for model or model train emergency vehicle lighting, the MBM-B2 is well prepared.

Whether for US police or German police vehicles, fire or ambulance the original signal sequences are pre-programmed.

The module has many predefined programs, so you do not have to set them up first. A program (2) is freely configurable.

The adjustable options are:
Order: L - R or L - R - L
Number of pulses: 1 - 10
Pause between pulses 1ms - 5s
Pulse length 10ms - 1s
Pause after a pulse sequence 1ms - 1s

Due to the numerous adjustment options, the small effect module from the police car or fire brigade to the position light of a quad copter can illuminate everything with the right lighting effect.

The size and weight of the board are kept very low, so the use should be possible in almost all models.

An overview of the basic programs:
TYPE B2 - 7 FLASH MODES
1. Police LED1 fast (triple flash) - LED2 slow (single flash) - fix
2. Customizable by Mode 2 - 6 - Mutual - Customizable (2) Order, (3) Number,
(4) Pause between flashes, (5) Flash length, (6) Pause after flash
3. Official police lightning sequence - reciprocal - fix
4. ambulance (1 flash with break) mutually - adaptable 4 and 6
5. Fire Department (3 flashes with break)
6th US Police (6 flashes with break) break changeable
7. Position Speed ??camera - very slow flashing 20ms / 1.5sec

The complete control takes place via 3 buttons on the module.
The settings are stored for over 20 years.

For installation or selection of the right program, the module has additional functions.
You can put the module in demo mode with a small key press.
Another combination will give you the lamp test mode.
A diagnosis of the lighting or its installation are thus considerably simplified.

You need for this module a voltage source with 7-30 volts and LEDs max. 12 watts total power (at 24 volts).

This module is ideal for purposes such as:
lighting effects
Running lights
warninglight
Case modding
advertising effects
light objects
billboards
Model / model trains

Technical specifications:
Universal 2-channel micro flash module
Type: MBM-B2
Total output with LEDs: 500 mA
Total output for incandescent lamps: 200 mA
Speed: finely adjustable
Indicator lights: 2 white function LEDs
Reverse polarity protection at the entrance: yes
Input voltage: 7 - 30 volts DC / 7 - 21 volts AC
Output voltage: DC - 0.75 volts of input voltage
Heat: almost no heat
Memory: saves the setting
Settings: fully configurable
Programs: 7 programs, 3 of which are freely adjustable
Additional functions: lamp test and demo mode
Pulse duration (flash duration): adjustable 10 - 1000 ms
Power consumption circuit: 5-10 mA
Weight: approx. 2.8g
Dimensions (H / W / D): 12 mm x 22 mm x 16 mm
PCB connector: RM 2,54 (servo connector)
made in: Germany

21.99 EUR^*

Art.-no. Schoenwitz_01-03-03-48

Schönwitz

This little technical wonder is only 22x16mm and a real all-rounder.
The MBM-B3 is optimally equipped especially for model or model railroad lighting.

Whether as a turn signal indicator, or as a flasher for level crossings, or for other flashing tasks, the module has been designed.

The module has many predefined programs, so you do not have to set them up first. A program (2) is freely configurable.

The adjustable options are:
(2) order: L - R or L - R - L
(3) Number of pulses: 1 - 10
(4) Pause between the pulses 250ms - 25s
(5) Pulse length 250ms - 25s
(6) Pause after a pulse train 250ms - 25s

Due to the numerous adjustment options, the small effect module from the police car or fire brigade to the position light of a quad copter can illuminate everything with the right lighting effect.

The size and weight of the board are kept very low, so the use should be possible in almost all models.

An overview of the basic programs:
TYPE B3 - 7 FLASH MODES
1. directional flashing light: both LEDs together 400ms / 400ms
2. Customizable by Mode 2 - 6 - Mutual - Customizable (2) Order, (3) Number,
(4) pause between flashing, (5) flashing length, (6) pause after a flashing sequence
3. Fast reverse turn signal 300ms / 300ms
4. Slow flashing light 500ms / 800ms
5. Slow flashing 50ms / 800ms
6. Slow change indicator 1.5sec / 1.5sec
7. Very slow change indicator 1sec / 3sec

The complete control takes place via 3 buttons on the module.
The settings are stored for over 20 years.

For installation or selection of the right program, the module has additional functions.
You can put the module in demo mode with a small key press.
Another combination will give you the lamp test mode.
A diagnosis of the lighting or its installation are thus considerably simplified.

You need for this module a voltage source with 7-30 volts and LEDs max. 12 watts total power (at 24 volts).

This module is ideal for purposes such as:
lighting effects
Running lights
warninglight
Case modding
advertising effects
light objects
billboards
Model / model trains

Technical specifications:
Universal 2-channel Micro Blink Module
Type: MBM-B3
Total output with LEDs: 500 mA
Total output for incandescent lamps: 200 mA
Speed: finely adjustable
Indicator lights: 2 white function LEDs
Reverse polarity protection at the entrance: yes
Input voltage: 7 - 30 volts DC / 7 - 21 volts AC
Output voltage: DC - 0.75 volts of input voltage
Heat: almost no heat
Memory: saves the setting
Settings: fully configurable
Programs: 7 programs, 3 of which are freely adjustable
Additional functions: lamp test and demo mode
Pulse duration (flash duration): adjustable 250ms - 25s
Power consumption circuit: 5-10 mA
Weight: approx. 2.8g
Dimensions (H / W / D): 12 mm x 22 mm x 16 mm
PCB connector: RM 2,54 (servo connector)
made in: Germany

21.99 EUR^*

Art.-no. Schoenwitz_01-03-03-51

Schönwitz

This little wonder of technology is only 22x16mm and effectively controls your LEDs and bulbs.

On the control there are mini pushbuttons with which 14 pre-set programs can be selected:
Radarblitzer often single flashes
Radarblitzer rare single flashes
Radarblitzer very rare single flashes
Radarblitzer often double flashes
Radarblitzer rarely double flashes
Radarblitzer very rarely double flashes

Camera flash very fast and often the following flashes
Photographer's flash frequent single flashes
Fotograflicherblitzer frequent single flashes but several in a row
Photographer's flash very rare single flashes but several in a row
Photographer's flashes very common single and multiple flashes
Photographer's flash frequent single and multiple flashes
Photographer's Blitzer rare single and multiple flashes
Photographer's flash frequent single and multiple flashes

Save your favorite and the module always starts with your selection.

To verify that the LEDs are properly connected, the module has an LED test mode.

Some examples of operation:
Speed ??Traps / Starenkäste / Blitzer
photographers flashes
Tribune flashes

Under the Accessories tab you will find our hand-crafted photographers and speed traps for the H0 scale, ideal in conjunction with this controller.

Technical specifications:
Universal 2-channel micro flash module
Type: MBM-B10
Total output with LEDs: 500 mA
Total output for incandescent lamps: 200 mA
Indicator lights: 2 white function LEDs
Reverse polarity protection at the entrance: yes
Input voltage: 7 - 30 volts DC / 7 - 21 volts AC
Output voltage: DC - 0.75 volts of input voltage
Heat: almost no heat
Memory: saves the setting
Programs: 14 programs
Additional functions: lamp test and demo mode
Power consumption circuit: 5-10 mA
Weight: approx. 2.8g
Dimensions (H / W / D): 12 mm x 22 mm x 16 mm
PCB connector: RM 2.54
made in: Germany

24.99 EUR^*

Art.-no. Schoenwitz_01-03-03-52

Schönwitz

This little wonder of technology is only 22x16mm and effectively controls your LEDs and bulbs.

There are mini pushbuttons on the control allowing you to select 10 pre-set programs:
flickering fluorescent lamp
more flickering fluorescent lamp 2 - more intense
Welding light with blue and white LED - short interval
Welding light with blue and white LED - long interval
defective bulb Luminous length 1-10 sec - Off 5 sec
defective bulb Luminous length 20-60 sec - Off 5-10 sec
defective bulb Luminous length 60-120 sec - from 10-30 sec
defective bulb Luminous length 10-300 sec - Off 5-30 sec
defective bulb Luminous length 120-300 sec - From 10-30 sec
defective bulb Luminous length 120-300 sec - from 30-60 sec
The programs affect channel 1 of the control, channel 2 additionally flashes irregularly briefly.

Save your favorite and the module always starts with your selection.

Most suitable is a white and a blue LED, whereupon the module is tuned.
The light color chosen by you is decisive for the effect achieved.

To verify that the LEDs are properly connected, the module has an LED test mode.

Some examples of operation:
Welder in a workshop
Simulation of a defective neon lamp / fluorescent tube
Effects on stages / festivals and festivities

Technical specifications:
Universal 2-channel micro flash module
Type: MBM-B7
Total output with LEDs: 500 mA
Total output for incandescent lamps: 200 mA
Indicator lights: 2 white function LEDs
Reverse polarity protection at the entrance: yes
Input voltage: 7 - 30 volts DC / 7 - 21 volts AC
Output voltage: DC - 0.75 volts of input voltage
Heat: almost no heat
Memory: saves the setting
Programs: 8 programs
Additional functions: lamp test and demo mode
Power consumption circuit: 5-10 mA
Weight: approx. 2.8g
Dimensions (H / W / D): 12 mm x 22 mm x 16 mm
PCB connector: RM 2.54
made in: Germany

3.29 EUR^*

Art.-no. Schoenwitz_01-03-03-49

Schönwitz

The connection cable set is designed for the 2-channel lighting control modules.
Due to the 6 different colors it can not be confused.

Technical specifications
Cable length - about 15cm
Cable cross section - 0.14mm²
Cable colors - red, yellow, green, blue, orange and brown

1.42 EUR^*

Art.-no. Schoenwitz_11-18-01

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limit the current independent of the supply voltage to max 20mA. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
- Adjusted current approx. - 20mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
-Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.42 EUR^*

Art.-no. Schoenwitz_11-18-02

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limits the current to max 5mA regardless of the supply voltage. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
Adjusted current approx. - 5mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.42 EUR^*

Art.-no. Schoenwitz_11-18-03

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limits the current to max. 10mA regardless of the supply voltage. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
Adjusted current approx. - 10mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.42 EUR^*

Art.-no. Schoenwitz_11-18-04

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limits the current to max 15mA regardless of the supply voltage. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
Adjusted current approx. - 15mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.42 EUR^*

Art.-no. Schoenwitz_11-18-05

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limits the current to max 2mA regardless of the supply voltage. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
Adjusted current approx. - 2mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.42 EUR^*

Art.-no. Schoenwitz_11-18-06

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current.

The electronics in the KSQ1 limits the current to max. 30mA regardless of the supply voltage. Your LED always shines constantly in a voltage range between 4V and 24V DC.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available.

Technical specifications
Set current approx. - 30mA
Operating voltage - 4V to 24V DC / DC
Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm
Weight approx. 0.2g
Voltage drop across the regulator - approx. 1.5V

1.86 EUR^*

Art.-no. Schoenwitz_11-18-07

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage.

The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 2mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -. In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting.

All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints.

Technical specifications

Adjusted current approx. - 2mA
Operating voltage - 4V to 24V AC / DC
Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm
Weight approx. 0,35g
Voltage drop across the regulator - approx. 1.5V
Current tolerance - +/- 10% possible

1.86 EUR^*

Art.-no. Schoenwitz_11-18-08

Schönwitz

Series resistances were yesterday!

This "intelligent resistor" always supplies your LEDs with the right current, even with AC voltage.

The electronics in the KSQ2 limit the current to approx. 5mA regardless of the supply voltage. Your LED always lights up constantly in a voltage range between 4V and 24V. In contrast to the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. A parallel connection is also possible, then the current is divided between the LEDs.

The KSQ 2 has two connection pads to which a direct or alternating voltage is connected and two additional pads that serve as output + and -. A buffer capacitor can also be connected via the connection pad on the bridge rectifier, for example to install flicker-free train lighting.

All connection pads are pre-tinned, which enables easy processing. You will find useful connection information on the back of the circuit board.

Technical specifications

Set current approx. -5mA
Operating voltage - 4V to 24V AC / DC
Dimensions LxWxH approx - 11mm x 8mm x 3.5mm
Weight about 0.35g
Voltage drop on the controller - approx. 1.5V
Current tolerance - +/- 10% possible

1.86 EUR^*

Art.-no. Schoenwitz_11-18-09

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage.

The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 2mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -. In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting.

All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints.

Technical specifications

Adjusted current approx. - 10mA
Operating voltage - 4V to 24V AC / DC
Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm
Weight approx. 0,35g
Voltage drop across the regulator - approx. 1.5V
Current tolerance - +/- 10% possible

1.86 EUR^*

Art.-no. Schoenwitz_11-18-10

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage.

The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 2mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -. In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting.

All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints.

Technical specifications

Adjusted current approx. - 15mA
Operating voltage - 4V to 24V AC / DC
Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm
Weight approx. 0,35g
Voltage drop across the regulator - approx. 1.5V
Current tolerance - +/- 10% possible

1.86 EUR^*

Art.-no. Schoenwitz_11-18-11

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage.

The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 20mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -.
In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting.

All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints.

Technical specifications
- Adjusted current approx. - 20mA
- Operating voltage - 4V to 24V AC / DC
- Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm
- Weight approx. - 0,35g
- Voltage drop at the regulator - approx. 1.5V
- Current tolerance - +/- 10% possible

1.86 EUR^*

Art.-no. Schoenwitz_11-18-12

Schönwitz

Vorwiderstände were yesterday!

This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage.

The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 20mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -.
In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting.

All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints.

Technical specifications
- Adjusted current approx. - 30mA
- Operating voltage - 4V to 24V AC / DC
- Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm
- Weight approx. - 0,35g
- Voltage drop at the regulator - approx. 1.5V
- Current tolerance - +/- 10% possible