Ladies and Gentlemen,
here are our new items and bargains:
259.00 EUR*
Art.-no. Fleischmann_731189
Fleischmann
Electric locomotive, 1116 159-5, the ÖBB, epoch VI.
Special execution on the occasion of the anniversary "Brennerbahn". Model with built-in load-controlled digital decoder and equipped factory-ready with sound. Engine with flywheel. Finely detailed design with 2 current collectors. 3-light peak signal and 2 red taillights with LED, which change with the direction of travel. Coupling pocket according to NEM 355 with KK kinematics. Prototype: The locomotive, designed by the well-known designer Gudrun Geiblinger, adorns a large alpine motif, with one locomotive side for the Austrian part of the burner, the other for the Italian part. On both sides known locomotives such as the ÖBB series 1044 or the FS railcar Aln can be seen, which were known vehicles of the Brenner railway or are still part of today. The current location of the Kunstlok can be followed at any time online in ÖBB Lokfinder http://lokfinder.oebb.at/de/Loks/Brennerlok.jsp. |
116.99 EUR*
Art.-no. Minitrix_15799
Minitrix
Prototype: 3 Habboillnss large-capacity sliding wall wagons. Private car of the company Wascosa, leased to the Swiss Post AG. All cars with different advertising designs. Current operating status 2016.
Highlights: - Current appearance. - Attractive and striking design. Model: With kinematics for close coupling. All cars with different running numbers. Overall length over buffer 435 mm. |
10.00 EUR*
Art.-no. FKS_160-040-03
FKS
Absperrgitter Typ 2
aus 0,2mm Neusilber geätzt Set mit 8 Stück inlusive Warnstreifen - Klebefolie inklusive 16 Stück dazu passender Standfüße Das Absperrgitter Typ 1 ist sowohl innerorts als auch auf Bundesstraßen und Autobahnen zu sehen wenn es darum geht Gefahren zu markieren (Straßenrandsbeschädigung, Löcher in der Fahrbahn). (für Modellbau Spur N / Maßstab 1:160) |
6.00 EUR*
Art.-no. FKS_160-040-05
FKS
Absperrgitter Typ M
aus 0,2mm Neusilber geätzt Set mit 8 Stück Dieses Absperrgitter findet man häufig bei Großveranstaltungen (Volksfest, große musikalische Festivitäten, Motorshow, großen Auto-Events, Tag der offenen Tür bei Bundeswehr und Feuerwehr), um die Zuschauer von einigen Bereichen der jeweiligen Darbietungen fernzuhalten. (für Modellbau Spur N / Maßstab 1:160) |
7.00 EUR*
Art.-no. FKS_160-040-08
FKS
Warnbake |
6.00 EUR*
Art.-no. FKS_160-050-01
FKS
Baustellen WC
(für Modellbau Spur N / Maßstab 1:160) |
2.50 EUR*
Art.-no. FKS_160-060-01
FKS
Kanaldeckel Typ 1
Set mit 5 Stück (für Modellbau Spur N / Maßstab 1:160) |
2.50 EUR*
Art.-no. FKS_160-060-02
FKS
Kanaldeckel Typ 2
Set mit 5 Stück (für Modellbau Spur N / Maßstab 1:160) |
2.50 EUR*
Art.-no. FKS_160-060-04
FKS
|
4.50 EUR*
Art.-no. FKS_160-090-01
FKS
Sackkarre
Set mit 11 Stück Material 0,2mm Neusilber (für Modellbau Spur N / Maßstab 1:160) |
4.50 EUR*
Art.-no. FKS_160-090-03
FKS
Kohlekarre für Kohlehandlungen
Eisenbahn-BW`s,.. Set mit 2 Stück Material 0,2mm Neusilber (für Modellbau Spur N / Maßstab 1:160) |
4.50 EUR*
Art.-no. FKS_160-090-04
FKS
Im Bausatz sind 2 Bretterkarren enthalten
Die Bretterkarren sind aus 0,2mm Neusilber geätzt. Der Bausatz kann lackiert und grundiert werden (für Modellbau Spur N / Maßstab 1:160) |
10.00 EUR*
Art.-no. FKS_160-130-05
FKS
Bausatz, Set mit 16 Stück (je 4 verschiedene Typen) |
4.00 EUR*
Art.-no. FKS_160-130-06
FKS
Bausatz, Set mit 20 Stück |
8.00 EUR*
Art.-no. FKS_160-200-01
FKS
box of 2000 bricks, really really small and nice! |
8.00 EUR*
Art.-no. FKS_160-200-05
FKS
Briketts
Unter Zuhilfenahme spezieller Werkstoffe war es möglich nahezu maßstäbliche Briketts für den Maßstab 1:160 herzustellen. Diese Briketts werden in Handarbeit gefertigt und sind in einer Verpackungseinheit von ca. 4000 Stück verpackt. Die Briketts können entsprechend mit verdünntem Weißleim geklebt werden. Das abgebildete Fahrzeug/Zubehör gehört nicht zum Lieferumfang. (für Modellbau Spur N / Maßstab 1:160) |
8.00 EUR*
Art.-no. FKS_160-200-10
FKS
box of 4200 bricks, really really small and nice! |
7.00 EUR*
Art.-no. FKS_160-975-01
FKS
Medical crosses (round) for Bundeswehr vehicles
made using the screen printing process Sheet with 58 decals / decals 5 different sizes |
7.00 EUR*
Art.-no. FKS_160-112-20
FKS
Kit, set of 3 pieces 3-part sliding ladder and 2 pieces hook ladders
The etched ladders reflect the modern aluminum look of the ladders. The kit is made of 0.4mm nickel silver. The ladders and hook ladders serve to make existing fire vehicles of epochs II to VI correspondingly more realistic and visually enhance. |
6.00 EUR*
Art.-no. FKS_160-112-21
FKS
Kit, set of 4 pieces 1-piece plug-in conductor and 4 pieces of 2-piece plug-in strip
The etched ladders reflect the modern aluminum look of the ladders. The kit is made of 0.4mm nickel silver. The ladders are used to make existing fire vehicles of epochs II to VI according to realistic and visually enhance. They are carried either as 2-part or 4-part on the fire trucks. |
7.00 EUR*
Art.-no. FKS_160-112-22
FKS
Kit, set of 3 pieces 3-part sliding ladder and 2 pieces hook ladders
The lasered ladders already give a fresh wood look. The kit is made of 0.5mm pressboard. The ladders and hook ladders serve to make existing fire vehicles of epochs II to VI correspondingly more realistic and visually enhance. |
6.00 EUR*
Art.-no. FKS_160-112-23
FKS
Kit, set with 10 pieces 1-piece plug-in conductor and 4 pieces 2-piece plug-in conductor
The lasered ladders already give a fresh wood look. The kit is made of 0.5mm pressboard. The ladders are used to make existing fire vehicles of epochs II to VI according to realistic and visually enhance. |
7.00 EUR*
Art.-no. FKS_160-112-30
FKS
Kit, set with 3 pieces ladder platforms
The etched ladder racks are used to hold sliding ladders on the roof of the bodies of fire-fighting vehicles (including fire-fighting vehicles and tank fire trucks). The kit is made of 0.2mm nickel silver and gives a corresponding crowfoot optics on the outside again. The kit contains 3 ladder racks, for example our sliding ladders https://www.dm-toys.de/produktdetails/items/FKS_160-112-20.html or https://www.dm-toys.de/produktdetails/items/FKS_160-112-22.html to record accordingly. The ladder trucks are used to make existing fire vehicles of epochs II to VI accordingly more realistic and visually enhance. |
7.00 EUR*
Art.-no. FKS_160-112-31
FKS
Kit, set of 5 ladder beds
The etched ladder racks are used to accommodate ladders on the roof of the structures of fire fighting vehicles (including fire fighting vehicles and tank fire trucks). The kit is made of 0.2mm nickel silver and gives a corresponding crowfoot optics on the outside again. The kit contains 5 ladder racks in 2 different lengths, eg the ladders https://www.dm-toys.de/produktdetails/items/FKS_160-112-21.html or https://www.dm-toys.de/produktdetails/items/FKS_160-112-23.html ntsprechend record. The ladder trucks are used to make existing fire engines of epochs II to VI correspondingly more realistic and visually enhance. |
7.00 EUR*
Art.-no. FKS_160-112-32
FKS
Kit, set with 3 pieces ladder platforms
The etched ladder racks are used to hold sliding ladders on the roof of the bodies of fire-fighting vehicles (including fire-fighting vehicles and tank fire trucks). The kit is made of 0.2mm nickel silver and gives a corresponding crowfoot optics on the outside again. The kit contains 3 ladder racks, for example our sliding ladders https://www.dm-toys.de/produktdetails/items/FKS_160-112-20.html or https://www.dm-toys.de/produktdetails/items/FKS_160-112-22.html to record accordingly. The ladder trucks are used to make existing fire vehicles of epochs II to VI accordingly more realistic and visually enhance. |
7.00 EUR*
Art.-no. FKS_160-112-33
FKS
Kit, set of 5 ladder beds
The etched ladder racks are used to accommodate ladders on the roof of the structures of fire fighting vehicles (including fire fighting vehicles and tank fire trucks). The kit is made of 0.2mm nickel silver and gives a corresponding crowfoot optics on the outside again. The kit contains 5 ladder racks in 2 different lengths, eg the ladders https://www.dm-toys.de/produktdetails/items/FKS_160-112-21.html or https://www.dm-toys.de/produktdetails/items/FKS_160-112-23.html ntsprechend record. The ladder trucks are used to make existing fire engines of epochs II to VI correspondingly more realistic and visually enhance. |
20.00 EUR*
Art.-no. FKS_160-112-35
FKS
kit
The kit consists of a 4-part 0.3mm nickel silver etched ladder park and a Resin 3D printed ladder chair and a machinist seat. These components can be used to refine an aerial ladder Dl 30 from Wiking. The pictured vehicle is not included! |
5.00 EUR*
Art.-no. FKS_160-112-40
FKS
Rescue basket for DL ??30
Kit, set with 3D printing part and etching part The rescue cage serves to rescue persons from height by the fire brigade. He is hooked to a corresponding holder on an aerial ladder park. The kit is made of 0.2mm nickel silver and a 3D printing part. The rescue cage serves to make existing turntable ladders of epochs III to V more realistic and to visually enhance them. (for model track N / 1: 160) |
15.00 EUR*
Art.-no. FKS_160-112-50
FKS
Construction for TLF 16
kit In a tank fire truck is a type of vehicle in which usually a fire pump and a large fire water tank are installed with which a fire-fighting is possible for a certain period without hydrants and fire extinguishing water tapping points. Thus, these vehicles are primarily equipped for firefighting and human rescue. The kit consists of a 3D printed construction, associated connections for hoses and Starktonhörnern. Furthermore, the kit includes an etched Struktrulech for the roof of the structure, a roof rail and 2 different ascent ladders for the rear of the body. The base vehicle required is a MB L322 from Lemke Mini's (this vehicle is NOT included in the kit!). (for model construction lane N / scale 1: 160) " |
15.00 EUR*
Art.-no. FKS_160-112-51
FKS
Structure RW 1
kit An RW (rescue vehicle) is a type of vehicle that is used in the fire department for technical assistance. He has extensive tools and special equipment that is used in accidents with people (including in traffic) to free them from emergencies. The kit consists of a 3D printed construction, associated connections for hoses and Starktonhörnern.Weiterhin the kit includes an etched Struktrulech for the roof of the body, a roof rail and 2 different ascent ladders for the rear of the Aufbau.Als base vehicle is a MB L322 by Lemke Mini 'S required (this vehicle is NOT included in the kit!). (For model construction lane N / scale 1: 160) " |
8.00 EUR*
Art.-no. FKS_160-130-07
FKS
Etched parts hinges
Hinges are used to connect eg doors with a door frame, or gates with a door frame or window with the window frame. For heavy doors and gates, these hinges are also called "cross hangers or throw hangers". The set includes a total of 66 hinges in 5 different versions. The set is made of 0.2mm nickel silver. (for model track N / 1: 160) |
8.00 EUR*
Art.-no. FKS_160-130-08
FKS
Etched parts wall anchor
The wall anchor is a metal component in a wall or wall that absorbs tensile forces from components adjacent to the wall. and therefore too. The actual anchor is usually made of a round or flat iron or a metal plate. This wall anchor is either installed in a wall joint (so mortared), or you can find it visible on the side of the wall, which faces the component to be anchored. The set includes a total of 142 wall brackets in 5 different versions. The set is made of 0.2mm nickel silver. (for model track N / 1: 160) " |
8.00 EUR*
Art.-no. FKS_160-200-56
FKS
Container syringe, 3D printing
A bucket sprayer is a portable small extinguisher with hand operated (double acting) piston pump. Among other things, this is used for extinguishing work or for extinguishing small fires or incipient fires. The bucket sprayer is widely used by the German Armed Forces. But it is also found in engine sheds, warehouses, public buildings, workshops, industrial plants. The kit consists of 5 unpainted 3D-Druckteilen.Hiermit can, inter alia, Lokschuppen, storage rooms, public buildings, workshops, industrial plants ...... Epochs II to VI to make more realistic and visually enhance. |
6.00 EUR*
Art.-no. FKS_160-200-61
FKS
The trailer hitch is used both in the current generation of vehicles as well as the older truck's use. The set includes 10 trailer couplings in resin 3D printing.
The pictured vehicle is not included! |
6.00 EUR*
Art.-no. FKS_160-200-62
FKS
Dipsticks (also called dipsticks) belong to the passive systems which serve as orientation points on vehicles to improve the recognition of the vehicle position. Dipsticks (dipsticks) were usually attached to the ends of the front bumpers or the front fenders. This allowed the driver to use the flexible dipsticks as a guide.
The kit consists of 10 dipsticks made in Resin 3D printing. These components can refine corresponding trucks in the scale 1: 160. The pictured vehicle is not included! |
10.00 EUR*
Art.-no. FKS_160-205-01
FKS
Construction compressor, kit 3D, unpainted
Construction compressors provide on construction sites (and also in road construction) compressed air for demolition hammers, sowei injection and drilling equipment. A compressor is basically an engine for generating compressed air on a single-axle chassis. (for model track N / 1: 160) |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-10
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-11
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-12
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-13
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-14
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-15
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
2.74 EUR*
(10m, base price 0.27 EUR/m)
Art.-no. Schoenwitz_05-02-16
Schönwitz
High-quality enamelled copper wire, dyed on a practical spool. The lacquer layer insulates and protects against short-circuits. By tinning the enameled wire, the insulation melts.
Dates: Length - 10 meters on mini coil Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-01
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-02
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-03
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-04
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-05
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-06
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-07
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-08
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-09
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
4.94 EUR*
(10m, base price 0.49 EUR/m)
Art.-no. Schoenwitz_05-10-10
Schönwitz
The FEP strand, wound on a 10m mini coil, has a flexible conductor design and is used where space is limited, such as in locomotives or soldering small SMD LEDs due to its extremely small cross-section.
Technical specifications: Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0.05mm Stranded - tinned Outer diameter - about 0.28mm Insulation - FEP Current - max. 200mA Voltage - max. 30V Resistance - about 1.3 ohms per meter |
12.34 EUR*
Art.-no. Preiser_79226
Preiser
2x Santa Claus, children, snowman
|
Yours sincerely
Daniel Mrugalski
DM-Toys