Ladies and Gentlemen,
again this Year we´d like to play Advent calendar to count and celebrate the days in anticipation of Christmas. Each day a window opens and gives access to a special item with an outstanding price. Attention: when a new day begins, the window closes again and gives another special offer a chance. So you are welcome to visit every day not to miss a single product.
You´ll find the Advent calendar on our website.
Here are our new items and bargains:
99.99 EUR*
Art.-no. MU_N-A00083
Modellbahn Union
4 very filigree Finescale traffic lights with the right control to realize a crossroads. The traffic lights are equipped with colored SMD LEDs and wired, equipped with resistors and protective diodes and tested. The installation and connection is very simple - just drill a 3mm hole into the system and connect the traffic lights to the control unit. The control unit is suitable for DC and AC voltage from 10 to 18 volts.
|
9.99 EUR*
Art.-no. MU_N-A00249
Modellbahn Union
Finescale lamp with warm with LED. Resistor and diode are included, but need to be soldered to the wires, thus ensuring that the holes you need to drill for feeding the wires through the wall where you attach the lamp can remain extremely small.
|
14.99 EUR*
Art.-no. MU_N-B00022
Modellbahn Union
Model of the gatekeepers house in Backnang (on the Murrtalbahn near Stuttgart). Due to the standardisation of the design, similar buildings can be found throughout Württemberg. However, brick buildings very similar to this one these can be found throughout Germany and the building is therefore not limited to this region. The model is engraved in detail and comes with a 3D printed chimney.
|
305.99 EUR*
Art.-no. Minitrix_16383
Minitrix
Prototype: German Federal Railroad (DB) class 38.10-40 passenger locomotive class 38.10-40. Former Prussian P 8th boiler with 3 domes and Witte smoke deflectors. Wannentender 2'2'T 30.
variant form Model: Locomotive and tender mainly of die-cast metal. Bell armature motor with flywheel in the boiler. Built-in digital decoder with the formats DCC, Selectrix and Selectrix 2. Lok and Tender short-coupled. 3 axles driven. Traction tires. 3-light peak signal with warm white LEDs. Length over buffer 114 mm. Unique series. |
89.99 EUR*
Art.-no. Minitrix_15804
Minitrix
Prototype: 3 German Federal Railroad (DB) round-slide side unloading car Ktmmvs 69. Version with swivel roof above the loader. Application: For wet-sensitive goods.
Model: wagon with different operating numbers, with kinematics for short coupling and with load. Total length over buffer 180 mm. One-time series |
219.00 EUR*
Art.-no. Fleischmann_829350
Fleischmann
Display, consisting of 12 roll-roof cars, type Tamns886, DB AG / DB Cargo (epoch V).
The display consists of 12 Rolling roof wagons type Tamns 886 DB Cargo (each 2 x 829351 - 829353, with different operating numbers) and the DB AG (each 2 x 829354 - 829356, with different operating numbers). All cars are also available separately! Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. |
17.99 EUR*
Art.-no. Fleischmann_829351
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other road number than 829352 and 829353. |
17.99 EUR*
Art.-no. Fleischmann_829352
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other road number than 829351 und 829353. |
17.99 EUR*
Art.-no. Fleischmann_829353
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other road number than 829351 und 829352. |
17.99 EUR*
Art.-no. Fleischmann_829354
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other operating numbers than 829355 and 829356. |
17.99 EUR*
Art.-no. Fleischmann_829355
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other road number than 829354 and 829356. |
17.99 EUR*
Art.-no. Fleischmann_829356
Fleischmann
Rolling roof wagon, type Tamns 886, DB AG (DB Cargo), epoch V.
Prototypically painted and labeled. The roll roof is removable. Coupling pocket according to NEM 355 with close-coupling link. Other road number than 829354 and 829355. |
46.90 EUR
(RRP*)
39.99 EUR*
Art.-no. Fleischmann_837914
Fleischmann
2 pcs. Set of sliding tarpaulin wagons, type Shimms, the Luxembourg CFL (Cargo).
Models with NEM 355 coupler pocket and KK kinematics. Vehicles with different ordinal numbers. Version with current CFL logo. |
24.40 EUR*
Art.-no. Fleischmann_837923
Fleischmann
Sliding tarpaulin wagon ENERCON, type Shimmns, set in the Netherlands, epoch VI.
Models with NEM 355 coupler pocket and KK kinematics. |
15.90 EUR*
Art.-no. Rietze_16188
Rietze
Finished model made of plastic
|
21.99 EUR*
Art.-no. Schoenwitz_01-02-07-06
Schönwitz
You get a tiny illuminated bicycle with a driver figure (old woman). The model is equipped with a warm white front light and a red tail light LED of the type 0402. The lighting was processed neatly and the wiring of the light-emitting diodes is discreetly incorporated into the model and thus barely visible.
Technical specifications: Front light - LED SMD 0402 warm white Tail light - LED SMD 0402 red Series resistor + protection diode for connection to 12V to 16V DC or AC voltage Ready for connection to the model train transformer |
21.99 EUR*
Art.-no. Schoenwitz_01-02-07-05
Schönwitz
You will receive a tiny illuminated bicycle with a driver figure (+ front passenger). The model is equipped with a warm white front light and a red tail light LED of the type 0402. The lighting was processed neatly and the wiring of the light-emitting diodes is discreetly incorporated into the model and thus barely visible.
Technical specifications: Front light - LED SMD 0402 warm white Tail light - LED SMD 0402 red Series resistor + protection diode for connection to 12V to 16V DC or AC voltage Ready for connection to the model train transformer |
19.79 EUR*
Art.-no. Schoenwitz_01-02-01-01
Schönwitz
Bearing fire pure! A view for every model!
Functionality: Two LEDs (yellow and red) are installed in the storage fire. The LEDs can be controlled independent of each other, thus realizing a realistic bearing force effect. The set N contains: Bearing fire with an approx. 1m long connecting cable Connection to 12V - 16V DC or AC voltage (including series resistor and protective diode) Delivery without control. |
27.49 EUR*
Art.-no. Schoenwitz_01-03-03-50
Schönwitz
This little wonder of technology is only 22x16mm and effectively controls your LEDs and bulbs.
On the control there are mini pushbuttons with which 8 pre-set programs can be selected: - very calm fire, also candle - light less calm candle or fire - old candle, small wick, medium flickering or weak fire - Candle with gusts of wind - restless candle with two different colored LEDs - fierce fire - Campfire - Fireplace Save your favorite and the module always starts with your selection. Most suitable is a yellow and a red / orange LED, whereupon the module is tuned. The light color chosen by you is decisive for the effect achieved. To verify that the LEDs are properly connected, the module has an LED test mode. You can set whether the fire is smoldering or blazing. Some examples of operation: - Campfire while camping or on a campground - Burning house or accident scenarios - Effect lighting on folk festivals or celebrations - Crib campfire or candles - Decorative Kaminglut Under the Accessories tab you will find our handmade campfires for the H0 and N lanes, ideal in conjunction with this control. Technical specifications: - Universal 2-channel micro flash module - Type: MBM-B6 - Total output with LEDs: 500 mA - Total output for incandescent lamps: 200 mA - Indicator lights: 2 white function LEDs - Reverse polarity protection at the entrance: yes - Input voltage: 7 - 30 volts DC / 7 - 21 volts AC - Output voltage: DC - 0.75 volts of input voltage - Heat: almost no heat - Memory: saves the setting - Programs: 8 programs - Additional functions: lamp test and demo mode - Power consumption circuit: 5-10 mA - Weight: about 2.8g - Dimensions (H / W / D): 12 mm x 22 mm x 16 mm - PCB connector: RM 2.54 - made in: Germany |
Yours sincerely
Daniel Mrugalski
DM-Toys