Dear customer,
here our novelties and bargains:
9.99 EUR*
Art.-no. MU_N-A00248
Modellbahn Union
Finescale lamp with warm with LED. Resistor and diode are included, but need to be soldered to the wires, thus ensuring that the holes you need to drill for feeding the wires through the wall where you attach the lamp can remain extremely small.
|
59.99 EUR*
Art.-no. MU_N-H00081
Modellbahn Union
Model depicting a rural petrol station with gas pumps and oil cabinet. The doors to the workshop may be build either closed or open. When build open the workshop can be detailed using our workshop interior sets (MU_N-A00206 and MU_N-A00011). Two sets of gas pumps are supplied - one for period III and one for period IV.
|
24.99 EUR*
Art.-no. MU_N-H00058
Modellbahn Union
Farmbuildings Waldniel - coach barn. The main farmbuilding was build in Waldniel (Schwalmtal). Parts of the facades of the building , which was constructed as a timbered frame house, were updated in 1785 using bricks. The barns were constructed in 1791 (large) and 1802 (small) and originate from other lower rhine area farms. The coach barn is a reconstruction and depicts the situation around 1800.
The farmhouse from Waldniel This byre-dwelling is from Waldniel, which belongs to the community Schwalmtal. Originally, this house was a pure timber-frame house, but in the year 1785 big parts of the front of the building were replaced by historic bricks. Both the small barn from 1802, and the big barn, which was built in the year 1791, stem from different farms from the Lower-Rhine region. The carriage house is a reconstruction of a building from around 1800. The farm is very typical for the 19th century. The advancing industrialization also brought changes to the farms. Many peasants and day laborers had to get additional jobs in factories, because the money they earned on the farms was not enough to live on anymore. The economic freedom led to an enormous competition and thereby a big price pressure arose which many people could not bear up against. Furthermore, the women had to replace the workforce, which was lost because men went to the factories in the cities. Wealthy owners modernized and expanded their farms. But the housing conditions changed too: Health awareness increased and the knowledge of modern medicine expanded, which led to a higher demand of hygiene and sanitation. Running water, lavatories and bathrooms were used more and more. Did you know that… … the German expression for “filthy rich” would literally translated mean “stone rich”? This expression comes from building a house. In the past, people who did not have much money lived in houses with walls of wood, clay and hay. But in fall and winter these walls could not protect them very well from the cold, rain and snow. They had to be repaired very often because the rain had washed off the clay. The people who had more money could build houses of stone – the warmth of the oven stayed better inside and when the weather was bad the people where better protected because of the increased solidity of the wall. And everyone could see that one was “stone rich”. |
9.99 EUR*
Art.-no. MU_N-A00144
Modellbahn Union
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
11.99 EUR*
Art.-no. MU_N-A00145
Modellbahn Union
The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).
|
15.80 EUR*
Art.-no. Heki_6521
Heki
brass etched kit of the fence
|
24.99 EUR*
Art.-no. Artitec_316.057
Artitec
assembled and painted
|
31.99 EUR*
Art.-no. Artitec_14.129
Artitec
kit, not assembled and not painted. Paint and glue are not included. |
24.99 EUR*
Art.-no. Revell_05499
Revell
Model kit of the legendary Black Pearl, the ship of Captain Jack Sparrow from the film series FLUCH DER KARIBIK. In the fifth part of SALAZAR'S REVENUE Jack faces the fearsome Captain Salazar, who wants to kill any pirate on the open sea.
- decks with wood structure - Structured sails - Anchor - rowing boat - guns - shrouds - figurehead - Decorated transom mirror - flag panel - Display stand The innovative easy-click system guarantees fast success with this model: multicolored, precisely manufactured components are simply connected by simple mating and decorated with stickers. Number of parts 112 Height 235 mm Length 260 mm |
9.95 EUR
(RRP*)
5.99 EUR*
Art.-no. Lemke_LC4317
Lemke
The VW T3 from Volkswagen was the third generation of the VW van. It was produced from 1979 to 1992 and was the last transporter series with rear-wheel drive. After the VW 411/412 from 1968, the T3 was the last new development of a vehicle from Volkswagen with air-cooled rear engine. Like all VW buses, the third generation also bore the type designation Type 2. Within this series, the individual models T1, T2 and T3 were numbered internally.
In our DM-Toys blog by Christian Weiß, there are more interesting photos and information! |
9.95 EUR
(RRP*)
5.99 EUR*
Art.-no. Lemke_LC4321
Lemke
The VW T3 from Volkswagen was the third generation of the VW van. It was produced from 1979 to 1992 and was the last transporter series with rear-wheel drive. After the VW 411/412 from 1968, the T3 was the last new development of a vehicle from Volkswagen with air-cooled rear engine. Like all VW buses, the third generation also bore the type designation Type 2. Within this series, the individual models T1, T2 and T3 were numbered internally.
In our DM-Toys blog by Christian Weiß, there are more interesting photos and information! |
15.39 EUR*
Art.-no. Schoenwitz_01-03-21-01
Schönwitz
The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or discotheque. With this product you can put your models in the right place.
Technical specifications: Luminous color - tri-color red / yellow / green Number of LEDs - 18 pieces per 6 per color Distance of the LEDs - 10mm Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section. Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm) Separating points - 2 pieces after each 6 LEDs Connection cable - approx. 200mm long The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off. The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction. The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom. There are many more color options available, from monochrome to two-color to three-color LED chains. |
15.39 EUR*
Art.-no. Schoenwitz_01-03-21-03
Schönwitz
The filigree miniature fairy lights can be adapted to almost any purpose. Whether at your fair, fair, beer garden, weekly market, Christmas market, party tent, marquee or discotheque. With this product you can put your models in the right place.
Technical specifications: Luminous color - tri-color yellow Number of LEDs - 18 pieces per 6 per color Distance of the LEDs - 10mm Voltage - Connection to 12V to 16V DC or AC Pre-resistance and protection diode already integrated in each section. Dimensions approx. - L x W x H (180mm x 1.4mm x 1.0mm) Separating points - 2 pieces after each 6 LEDs Connection cable - approx. 200mm long The board of the fairy lights is highly flexible and colored black. The housing of the LEDs are colored in the respective luminescent color, so that the luminous elements "shine" even when switched off. The fairy lights can be separated in different places and can be extended almost arbitrarily over the practical solder joints. A combination of different colors is possible. The remnants can of course be used without restriction. The power supply can be done either from one end (see product images) of the board or left and right respectively, since the current-carrying tracks extend over the entire length on the top and bottom. There are many more color options available, from monochrome to two-color to three-color LED chains. |
5.49 EUR*
Art.-no. Schoenwitz_01-13-19-02
Schönwitz
Thanks to the MoBa distributor V2, it is possible to comfortably wire under the model railway layout. The high-quality screw terminals can be used to quickly supply new loads or track gates with voltage. All clamp points marked with "A" are connected with "B" just like all points. Next to each "A" terminal is a "B" terminal. So you can connect your consumers clearly without cable chaos. Thanks to the status LEDs, you can see at any time under the system whether there is any voltage on the board or not, without measuring it.
If both LEDs are illuminated, an AC voltage is applied to "A" and "B". If only the green LED is lit, a DC voltage with plus at "A" and minus at "B" is applied. If only the yellow LED is lit, a DC voltage with plus is applied to "B" and minus to "A". Technical information: - 12 clamping points - 6x "A" and 6x "B" - Status LEDs - current carrying capacity per terminal - max. 8A - total current carrying capacity - max. 8A - Maximum voltage - 30V AC / DC - Cross section - max. 1,5mm² - Dimensions approx. (L x W x H) - 75mm x 15mm x 13mm - 2 holes for PCB mounting |
10.99 EUR*
Art.-no. Schoenwitz_01-13-19-01
Schönwitz
Thanks to the MoBa distributor V1.1, it is possible to conveniently wire under the model railway layout. The high-quality screw terminals can be used to quickly supply new loads or track gates with voltage. All clamp points marked with "A" are connected with "B" just like all points. Next to each "A" terminal is a "B" terminal. So you can connect your consumers clearly without cable chaos.
Thanks to the status LEDs, you can see at any time under the system whether there is any voltage on the board or not, without measuring it. If both LEDs are illuminated, an AC voltage is applied to "A" and "B". If only LED "A" is lit, a DC voltage with plus is applied to "A" and minus to "B. If only LED "B" is lit, a DC voltage with plus is applied to "B" and minus to "A. You will receive a ready-made and tested board, including detailed instructions. Technical information: - 26 clamping points - 13x "A" and 13x "B" - Status LEDs - current carrying capacity per terminal - max. 8A - total current carrying capacity - max. 8A (supply to 2-pin terminal) - Maximum voltage - 30V AC / DC - Dimensions approx. (L x W x H) - 60mm x 52mm x 13mm - 4 holes for PCB mounting |
21.99 EUR*
Art.-no. Schoenwitz_01-03-04-10
Schönwitz
Technical specifications:
- Number - 60 pieces 10 each color - Colors - red, yellow, green, blue, black, white - voltage - max. 250V - current - max. 500mA - Contact - normally open / pushbutton / momentary operation - Version - Steel housing - Dimensions - Length about 28mm / mounting depth about 7mm |
17.59 EUR*
Art.-no. Schoenwitz_01-03-19-03
Schönwitz
The fuse distributor offers you 4 separate and protected circuits. Protect your model railway and separate different supply areas (signals / points / lighting / traction current). In case of an error, the chance of a cable fire * is reduced and you can find the source of the error faster. Without your model train failing in one fell swoop.
The four status LEDs provide an overview at all times of whether the fuse has tripped and the output is supplied with power. This is the conventional protection with 4 5x20mm miniature fuses of 500mA average. If the consumers are protected otherwise than with 500mA funds, you can replace the fuse inserts up to a value of 12A. Technical specifications: - number of storm circuits - 4 - Dimensions (L x W x H) - 65mm x 55mm x 18mm - Input voltage - max. 24V AC / DC - Max. Cross-section of the terminals - 1.5mm² - Max. Power of terminals - 12A - Fuse value - 5x20mm 0.5A average orders * Please note that the fuse distributor can not provide full protection of life and limb. Only properly applied and dimensioned the risk of a cable fire is reduced. |
16.49 EUR*
Art.-no. Schoenwitz_01-03-19-04
Schönwitz
The fuse distributor offers you 4 separate and protected circuits. Protect your model railway and separate different supply areas (signals / points / lighting / traction current). In case of an error, the chance of a cable fire * is reduced and you can find the source of the error faster. Without your model train failing in one fell swoop.
The four status LEDs provide an overview at all times of whether the fuse has tripped and the output is supplied with power. These are electronic PTC fuses that break the circuit when 1A is exceeded and automatically close the circuit again if it falls below 0.5A. Technical specifications: - number of storm circuits - 4 - Dimensions (L x W x H) - 65mm x 55mm x 13mm - Input voltage - max. 24V AC / DC - Max. Cross-section of the terminals - 1.5mm² - Max. Power of terminals - 12A - Fuse rating type PTC fuse - 1A tripping current, 0.5A holding current * Please note that the fuse distributor can not provide full protection of life and limb. Only properly applied and dimensioned the risk of a cable fire is reduced. |
15.39 EUR*
Art.-no. Schoenwitz_11-12-02-07
Schönwitz
The heart of the module is a "bistable relay" with two changeover contacts / switches. Bistable relays have two switching states, which are maintained even when de-energized. This is important for model railroaders, for example the signal position, block circuits etc. are retained.
The module is suitable for switching block positions, control lines, track sections or electrically operated model train accessories (e.g. signals, switches, barriers, lighting, etc.) on all systems. It is controlled by buttons, switch contacts or reed contacts and can be used for all model trains, whether direct, alternating or digital current. Technical specifications - Dimensions - (L x W x H) 60mm x 31mm x 28mm - Type - Bistable relay 2xUM - V23042-B2201-B101 - Input voltage - 12V to 19V DC or AC voltage - Current consumption - approx.10mA - Switching capacity - maximum 2A - High quality connection terminals - max. 1.5mm² - Reverse polarity protection at the entrance - Relay easily exchangeable, since only plugged in (not soldered) You can find the operating instructions for download below. Examples of use - Signal image controls - Block location controls - Shuttle train operation with control by moving trains outside the shuttle route - Switching of motor rotation directions (fair, turntables, cranes etc.) - Train control, eg switching signals and switches with limit switch - Automatically switch on the station lighting when the train enters and exits again (with reed contacts and magnet) - Automatically close and open a barrier system from the train with reed contacts and magnet - Switch functions on / off using a button - and much more A big advantage of this module is that the relay is in a socket and is not soldered on. This means that the relay can be easily replaced at any time. |
1.31 EUR*
Art.-no. Schoenwitz_11-12-02-08
Schönwitz
This mounting kit has been put together to professionally and professionally fix circuit boards on a wooden or plastic base. The set includes 4 chipboard screws and 4 plastic spacers.
Technical specifications - 4 plastic spacers / spacers (height 5mm) - 4 chipboard screws galvanized with Pan-Head (3 x 20mm) |
2.70 EUR*
(160cm, base price 1.69 EUR/m)
Art.-no. Schoenwitz_04-03-22
Schönwitz
Fields Entlötlitze is a halogen-free flux impregnated, extremely absorbent copper strand in a practical plastic roll for soldering SMD and conventional components and for removing excess solder on printed circuits.
Application - Heat the solder joint to be corrected to the liquid state. Feed the desoldering wire until the solder has been absorbed. Technical specifications - Manufacturer - FELDER soldering technology - Width - 1.0mm - Length - 1,6m - Color code - yellow - Material - copper - Fluxes - 1.1.3.B, DIN EN 29454 ROL0, DIN EN 61190 - Storage information - Store in a dry place |
2.70 EUR*
(160cm, base price 1.69 EUR/m)
Art.-no. Schoenwitz_04-03-23
Schönwitz
Fields Entlötlitze is a halogen-free flux impregnated, extremely absorbent copper strand in a practical plastic roll for soldering SMD and conventional components and for removing excess solder on printed circuits.
Application - Heat the solder joint to be corrected to the liquid state. Feed the desoldering wire until the solder has been absorbed. Technical specifications - Manufacturer - FELDER soldering technology - width - 1.5mm - Length - 1,6m - Color code - yellow - Material - copper - Fluxes - 1.1.3.B, DIN EN 29454 ROL0, DIN EN 61190 - Storage information - Store in a dry place |
2.70 EUR*
(160cm, base price 1.69 EUR/m)
Art.-no. Schoenwitz_04-03-24
Schönwitz
Fields Entlötlitze is a halogen-free flux impregnated, extremely absorbent copper strand in a practical plastic roll for soldering SMD and conventional components and for removing excess solder on printed circuits.
Application - Heat the solder joint to be corrected to the liquid state. Feed the desoldering wire until the solder has been absorbed. Technical specifications - Manufacturer - FELDER soldering technology - width - 2.0mm - Length - 1,6m - Color code - yellow - Material - copper - Fluxes - 1.1.3.B, DIN EN 29454 ROL0, DIN EN 61190 - Storage information - Store in a dry place |
2.70 EUR*
(160cm, base price 1.69 EUR/m)
Art.-no. Schoenwitz_04-03-25
Schönwitz
Fields Entlötlitze is a halogen-free flux impregnated, extremely absorbent copper strand in a practical plastic roll for soldering SMD and conventional components and for removing excess solder on printed circuits.
Application - Heat the solder joint to be corrected to the liquid state. Feed the desoldering wire until the solder has been absorbed. Technical specifications - Manufacturer - FELDER soldering technology - width - 2.5mm - Length - 1,6m - Color code - yellow - Material - copper - Fluxes - 1.1.3.B, DIN EN 29454 ROL0, DIN EN 61190 - Storage information - Store in a dry place |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-64
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-63
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-62
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
3.29 EUR*
Art.-no. Schoenwitz_01-03-06-61
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-59
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-58
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
2.19 EUR*
Art.-no. Schoenwitz_01-03-06-54
Schönwitz
We offer here the smallest series LED (type 0201) of the world, soldered ready with 0,15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - Voltage - typ. 1,95V - current - max. 20mA - Beam angle - approx. 135 ° - Luminosity - about 105mcd - Housing color - clear - Dimensions of the LED - L x W x H (0.65mm x 0.35mm x 0.2mm) |
1.31 EUR*
Art.-no. Schoenwitz_01-03-06-11
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.31 EUR*
Art.-no. Schoenwitz_01-03-06-12
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.42 EUR*
Art.-no. Schoenwitz_01-03-06-16
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.42 EUR*
Art.-no. Schoenwitz_01-03-06-21
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.42 EUR*
Art.-no. Schoenwitz_01-03-06-23
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.31 EUR*
Art.-no. Schoenwitz_01-03-06-26
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.31 EUR*
Art.-no. Schoenwitz_01-03-06-27
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.42 EUR*
Art.-no. Schoenwitz_01-03-06-28
Schönwitz
Here we offer a tiny LED (type 0402), soldered to 0.15mm thin and insulated copper wire.
The enameled wires are colored, the plus-pole red and the minus-pole black. Technical specifications: - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - Connection cable - approx. 150mm long - Polarity - plus pole red and the minus pole black - diameter of enamelled copper wire - 0.15mm - voltage - max. 2.0V - current - max. 20mA - Beam angle - approx. 120 ° - Luminosity - about 40mcd - Housing color - clear - Dimensions of LED - L x W x H (1.0mm x 0.5mm x 0.5mm) |
1.64 EUR*
Art.-no. Schoenwitz_01-03-06-09
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - luminous color - warm white - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-10
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.64 EUR*
Art.-no. Schoenwitz_01-03-06-14
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-15
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-17
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.64 EUR*
Art.-no. Schoenwitz_01-03-06-19
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-22
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-29
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-30
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
1.10 EUR*
Art.-no. Schoenwitz_01-03-06-31
Schönwitz
Here we offer a tiny LED (design 0603), soldered to 0.15mm thin and insulated copper wire. The enamel wires are colored to recognize the polarity at the same time.
Technical specifications: - Connection cable - approx. 150mm long - Polarity - positive pole = red / negative pole = black - diameter of enamelled copper wire - 0.15mm - voltage - max. 3.0V - current - max. 20mA - Dimensions of the LED - L x W x H (1.6mm x 0.8mm x 0.4mm) |
0.11 EUR*
Art.-no. Schoenwitz_11-06-01-01
Schönwitz
Metal film resistors from brand manufacturer YAGEO.
Technical specifications: - Value - 100 ohms - Tolerance - 1% - Power - 0.6 watts - Type - 0207 - voltage - max. 350V - Temperature coefficient - ± 50ppm / ° C - Temperature working range - -55 ° C to + 155 ° C - Manufacturer - YAGEO - Manufacturer's Series - MF0 - Manufacturer Part Number - MF0207FTE52-100R |
0.11 EUR*
Art.-no. Schoenwitz_11-06-01-05
Schönwitz
Metal film resistors from brand manufacturer YAGEO.
Technical specifications: - value - 4.7 KOhm Technical specifications: - Tolerance - 1% - Power - 0.6 watts - Type - 0207 - voltage - max. 350V - Temperature coefficient - ± 50ppm / ° C - Temperature working range - -55 ° C to + 155 ° C - Manufacturer - YAGEO - Manufacturer's Series - MF0 - Manufacturer Part Number - MF0207FTE52-4K7 |
1.42 EUR*
Art.-no. Schoenwitz_11-18-01
Schönwitz
Vorwiderstände were yesterday!
This "intelligent resistor", barely larger than a standard resistor, always supplies your LEDs with the correct current. The electronics in the KSQ1 limit the current independent of the supply voltage to max 20mA. Your LED always shines constantly in a voltage range between 4V and 24V DC. Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs. The KSQ1 is installed like a series resistor, but left and right two generous connection pads are available. Technical specifications - Adjusted current approx. - 20mA Operating voltage - 4V to 24V DC / DC Dimensions LxWxH approx. - 10mm x 4.5mm x 2.1mm -Weight approx. 0.2g Voltage drop across the regulator - approx. 1.5V |
1.86 EUR*
Art.-no. Schoenwitz_11-18-11
Schönwitz
Vorwiderstände were yesterday!
This "intelligent resistor" always supplies your LEDs with the correct current even with AC voltage. The electronics in the KSQ2 limit the current independent of the supply voltage to approx. 20mA. Your LED will always be steady in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer. Depending on the LED type and input voltage, 11 LEDs can be connected in series. Parallel connection is also possible, then the current is split between the LEDs. The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -. In addition, a buffer capacitor can be connected via the connection pad on the bridge rectifier in order, for example, to install flicker-free train lighting. All connection pads are pre-tinned, which allows easy processing. On the back of the board you will find useful connection hints. Technical specifications - Adjusted current approx. - 20mA - Operating voltage - 4V to 24V AC / DC - Dimensions LxWxH approx. - 11mm x 8mm x 3.5mm - Weight approx. - 0,35g - Voltage drop at the regulator - approx. 1.5V - Current tolerance - +/- 10% possible |
0.22 EUR*
Art.-no. Schoenwitz_01-03-02-01
Schönwitz
These silicon diodes can be used to protect LEDs. LEDs must not be operated on AC voltage, otherwise the service life will be significantly reduced. Therefore, these diodes are used. They turn the AC voltage from the transformer into a DC voltage.
Technical specifications: - Manufacturer - Diotec Semiconductor - Manufacturer Part Number - 1N 4148 - Housing - DO35 - voltage - max. 75V - current - max. 150mA - Packaging - Belt section |
Yours sincerely
Daniel Mrugalski
DM-Toys