Dear customer,
here our novelties and bargains:
39.99 EUR*
Art.-no. MU_N-B00064
Modellbahn Union
This model resembles the cantilever signal bridge used in the eras IV-VI in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED entry signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.
This kit is for experienced modellers. |
39.99 EUR*
Art.-no. MU_N-B00065
Modellbahn Union
This model resembles the cantilever signal bridge used in the eras IV-VI in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED exit signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.
This kit is for experienced modellers. |
6.99 EUR*
(50ml, base price 139.80 EUR/l)
Art.-no. Deluxe_AD21
Deluxe Materials
The thin, non-fuming cyano alternative.
|
5.99 EUR*
(28g, base price 213.93 EUR/kg)
Art.-no. Deluxe_AD29
Deluxe Materials
Wax adhesive for holding miniatures in place whilst allowing re-positioning.
|
7.99 EUR*
(50ml, base price 159.80 EUR/l)
Art.-no. Deluxe_AD57
Deluxe Materials
For fast assembly of card models eg. railway buildings and rockets.
Also bonds balsa wood, paper and card to most plastics. Use sparingly, align and press parts together for instant bond. Water clean up. |
199.00 EUR
(RRP*)
139.99 EUR*
Art.-no. Fleischmann_737105
Fleischmann
Electric locomotive E 69 05 of the Deutsche Bundesbahn (DB). Epoch IIIa. |
249.00 EUR
(RRP*)
189.99 EUR*
Art.-no. Fleischmann_737185
Fleischmann
Electric locomotive E 69 05 of the Deutsche Bundesbahn (DB). Epoch IIIa. |
159.00 EUR
(RRP*)
119.99 EUR*
Art.-no. Fleischmann_733101
Fleischmann
Electric locomotive series 139 of the Deutsche Bundesbahn in ocean blue and beige livery. Equipped with double lamps. Epoch IV. |
159.00 EUR
(RRP*)
109.99 EUR*
Art.-no. Fleischmann_733603
Fleischmann
Electric locomotive BR 139 of the company Lokomotion. Epoch V - VI. |
239.00 EUR
(RRP*)
189.99 EUR*
Art.-no. Fleischmann_733673
Fleischmann
Electric locomotive BR 139 of the company Lokomotion. Epoch V - VI. |
159.00 EUR
(RRP*)
119.99 EUR*
Art.-no. Fleischmann_736506
Fleischmann
Electric locomotive type Rc 2 of the Swedish State Railways (SJ). Version in blood orange livery. Operating state: End of the 1980s. Epoch IV. In true to the original livery and lettering. In-plane applied windows. Metal die-cast chassis. Motor with flywheel. Drive on all 4 axles. Traction tyres. Interface NEM 651 for the adaptation of a digital decoder. Plug-in coupler pocket according to NEM 355 standards. Triple LED headlights that change with the direction of travel. |
24.40 EUR
(RRP*)
19.99 EUR*
Art.-no. Fleischmann_834109
Fleischmann
The model is a refrigerated wagon of the brewery BROUWERU DE 3 HOEFIJZERS that operates for the NS. Epoch III. Model with coupler pocket according to NEM 355 standards and close coupling mechanism. |
37.90 EUR
(RRP*)
27.99 EUR*
Art.-no. Fleischmann_845363
Fleischmann
Standard pocket wagon that carries a container "H.ESSERS" of the Belgian SNCB. Epoch V. |
31.90 EUR
(RRP*)
19.99 EUR*
Art.-no. Fleischmann_863003
Fleischmann
Luggage car for express trains type Pw4üe of the Deutsche Bundesbahn (DB). Epoch IV. |
31.90 EUR
(RRP*)
21.99 EUR*
Art.-no. Fleischmann_867605
Fleischmann
2nd/3rd class passenger carriage of the Belgian State Railways SNCB. Epoch III. The model has interior furnishing and in-plane applied windows. It can be retrofitted with interior lighting. |
159.99 EUR*
Art.-no. GF_371-505
Graham Farish
Dieseltriebzug Class 101 2 Car DMU BR Network SouthEast
|
14.99 EUR*
Art.-no. Kato_20-092
Kato
4 x 33 mm straight & 4 x 38mm straight in blister
Code 80 Gauge: 9mm Rail profile height: 2.2mm Bedding width: 25mm Bed height: 5mm Total height: 7.3mm Threshold distance: 5mm KATO offers an excellent track N-track system with a gray speckled trackbed body (fine grain) that is accurate to scale, extremely stable and ideal for all N-gauge models. The ballast body is made of elastic plastic and is about 25mm wide. The tracks can easily be connected with each other via plug-in connections and snap in with an audible "click". The metal rail shoes are supported by additional plastic connectors on the bottom. This protects the rail shoe while ensuring a perfect, accurate and reliable connection. |
19.79 EUR*
Art.-no. Schoenwitz_01-02-01-01
Schönwitz
Bearing fire pure! A view for every model!
Functionality: Two LEDs (yellow and red) are installed in the storage fire. The LEDs can be controlled independent of each other, thus realizing a realistic bearing force effect. The set N contains: Bearing fire with an approx. 1m long connecting cable Connection to 12V - 16V DC or AC voltage (including series resistor and protective diode) Delivery without control. |
16.49 EUR*
Art.-no. Schoenwitz_01-02-01-03
Schönwitz
Christmas tree illuminated with 12 yellow miniature LEDs. A real sight!
Technical specifications: Ready for connection to 12V - 16V DC or AC voltage Tree height with foot: approx. 35-60mm Scale track N / 1: 160 Number of LEDs - 12 Light color - yellow |
14.29 EUR*
Art.-no. Schoenwitz_01-02-01-04
Schönwitz
Ready for the light output of a model railroad transformer.
Technical specifications: Connection to 12-16V DC or AC voltage Illuminated with a yellow miniature LED Diameter - approx. 6mm Scale - 1: 160 / track N |
21.99 EUR*
Art.-no. Schoenwitz_01-02-07-04
Schönwitz
You will get a tiny illuminated bike with a driver figure (figure with scarf). The model is equipped with a warm-white front light and a red taillight LED of the design 0402. The lighting has been processed cleanly and the cabling of the light-emitting diodes is subtly incorporated into the model and thus barely visible.
Technical specifications: Frontlight - LED SMD 0402 warmwhite Rear light - LED SMD 0402 red Resistance + protection diode for connection to 12V to 16V DC or AC voltage Ready for the model train transformer |
21.99 EUR*
Art.-no. Schoenwitz_01-02-07-07
Schönwitz
You get a tiny illuminated scooter driver with a driver figure (figure male). The model is equipped with a warm white front light and a red taillight LED of the design 0402. The lighting has been processed cleanly and the cabling of the light-emitting diodes is subtly incorporated into the model and thus hardly visible.
Technical specifications: Frontlight - LED SMD 0402 warmwhite Rear light - LED SMD 0402 red Resistance + protection diode for connection to 12V to 16V DC or AC voltage Ready for the model train transformer |
20.89 EUR*
Art.-no. Schoenwitz_01-03-14-01-01
Schönwitz
An automatic pendulum operation on a secondary track animates every model railway system. When the train reaches its holding area, it is sent back in the opposite direction after the set waiting time. When the train enters the separation path, the train stops at the set time and then returns to the other end of the route. The polarity reversal required for changing direction is performed automatically with this module. No external contacts required.
Ideal for couches and small train stations. Technical specifications: Suitable for all wheel widths! Attention! only for DC / analog DC locomotives Operating voltage - 12V - 18 V DC or AC voltage Adjustable time - approx. 8 s to 1.5 min The connection is made to the traction transformer. Block ready to be connected and tested. Includes detailed connection and operating instructions. |
16.49 EUR*
(70m, base price 0.24 EUR/m)
Art.-no. Schoenwitz_05-02-17
Schönwitz
High quality copper wire, dyed on a practical coil. The lacquer layer insulates and protects against short circuits. The insulation melts by the tin coating of the lacquer wire.
Price advantage in the set against the retail purchase! Dates: Length - 7 minipulen with 10 meters each Copper diameter - 0.15mm Overall diameter - 0.16mm Melting point of the insulation - approx. 350 ° C Paint color - red / yellow / green / blue / black / orange / violet |
43.99 EUR*
(100m, base price 0.44 EUR/m)
Art.-no. Schoenwitz_05-10-11
Schönwitz
The FEP braid, wound on mini coils with a length of 10m, have a flexible conductor structure and are used wherever space is limited due to the extremely small cross-section, eg in locomotives or for soldering small SMD LEDs.
Technical specifications: Length - 10 pieces each with 10 meters Type - FEP (flexible) Cross section - 0.014mm² / AWG36 Conductor construction - 7x0,05mm Braid - tinned Outside diameter - approx. 0,28mm Insulation - FEP Colors - red / yellow / green / blue / orange / white / gray / brown / purple / black Current - max. 200mA Voltage - Max. 30V Resistance - about 1.3 ohms per meter |
26.89 EUR*
Art.-no. Preiser_79476
Preiser
|
26.89 EUR*
Art.-no. Preiser_79477
Preiser
|
26.89 EUR*
Art.-no. Preiser_79479
Preiser
|
5.99 EUR*
Art.-no. Oxford_NCOR3001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
5.99 EUR*
Art.-no. Oxford_NMGB001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box.
Registered 419 FCR, our model is decorated in bright red with a mass of chrome to the exterior and comes with hood down to reveal the black interior and black tonneau cover. Note the distinctive MGT badge in red and silver on the boot and again in red, black and silver above the radiator grille. |
6.99 EUR*
Art.-no. Oxford_NNMN001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
16.99 EUR*
Art.-no. Oxford_NSHL01CT
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box
|
5.99 EUR*
Art.-no. Oxford_NFARM003
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
6.99 EUR
(RRP*)
5.99 EUR*
Art.-no. Oxford_NDSC001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
8.99 EUR*
Art.-no. Oxford_NAEC014
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
This is a crossover from the 1:76 scale Oxford military series, appearing in exactly the same livery for 1:148 scale enthusiasts. Decorated in drab olive green and dark grey camouflage effect to the sides with a dark grey roof, the interior is also moulded in olive green with a black steering wheel. The canvas back and bodywork are painted in drab olive green with brown camouflage markings and brown roof. The rope ‘ties’ are cleverly printed in beige to achieve a realistic effect. Another spot of realism sees the rear canopy windows masked to show clear plastic moulding. |
Yours sincerely
Daniel Mrugalski
DM-Toys