N-Scale 10/2017: Modellbahn Union

Dear customer,

here our novelties and bargains:

Fuchs Excavator 301 back shovel

29.99 EUR^*

Art.-no. DM-Toys_17201

DM-Toys

ready assembled and painted

Fuchs Excavator 301 front shovel

29.99 EUR^*

Art.-no. DM-Toys_17202

DM-Toys

ready assembled and painted

Concrete bomb 2 different

5.99 EUR^*

Art.-no. MU_N-A00219

Modellbahn Union

This highly detailed 3D printed set contains 2 fully built, but unpainted stops. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

concrete mixer

4.99 EUR^*

Art.-no. MU_N-A00220

Modellbahn Union

This highly detailed 3D printed set contains 2 fully built, but unpainted stops. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

Cargo goods Thermo hood for warmbram transport

15.99 EUR^*

Art.-no. MU_N-A00212

Modellbahn Union

This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

Air conditioning small 4x

4.99 EUR^*

Art.-no. MU_N-A00094

Modellbahn Union

This highly detailed 3D printed set contains 2 fully built, but unpainted stops. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

Transformer station 630 kVA

5.99 EUR^*

Art.-no. MU_N-A00181

Modellbahn Union

This highly detailed 3D printed set contains 2 fully built, but unpainted stops. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

Emergency telephone 6x

4.99 EUR^*

Art.-no. MU_N-A00215

Modellbahn Union

This highly detailed 3D printed set contains 2 fully built, but unpainted stops. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

roof turbine ventilators

4.99 EUR^*

Art.-no. MU_N-A00087

Modellbahn Union

This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

roof turbine ventilators

5.99 EUR^*

Art.-no. MU_N-A00088

Modellbahn Union

This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

turbine ventilators

4.99 EUR^*

Art.-no. MU_N-A00162

Modellbahn Union

This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.

Finescale lamps kit with straight holder 5x

14.99 EUR^*

Art.-no. MU_N-A00222

Modellbahn Union

Wall lamp kit with straight holder. Usable as outdoor lighting z. B. goods sheds, station and industrial buildings. The lamps can be equipped with an SMD LED (eg 0402 - not included!). For the implementation of the strands are already holes in the product.

Dimensions: 4,9x10,4x8,7mm

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

Finescale lamps kit with round holder 5x

14.99 EUR^*

Art.-no. MU_N-A00223

Modellbahn Union

Wall lamp kit with round holder. Usable as outdoor lighting z. B. goods sheds, station and industrial buildings. The lamps can be equipped with an SMD LED (eg 0402 - not included!). For the implementation of the strands are already holes in the product.

- Dimensions 4,8x11,5x7,3mm

The highly detailed parts are made of resin in the 3D printing process and are delivered unpainted. The accessories can be processed and painted with standard tools and colors (eg with Revell Email or Revell Aqua Color).

DCC digital Electric locomotive BR E 69, DRB

249.00 EUR (RRP*)

199.99 EUR^*

Art.-no. Fleischmann_737171

Fleischmann

Electric locomotive E 69 05 of the Deutsche Reichsbahn (DRB). Epoch II.

Metal die-cast housing. Model in true to the original livery and lettering. Drive on 4 wheels. LED headlight that changes with the direction of travel. With installed DCC-Decoder.

Electrolok BR 1216 SZ Scotch Ep.VI

134.90 EUR (RRP*)

79.99 EUR^*

Art.-no. Hobbytrain_H2728

Hobbytrain

Model information:
- Red / white light change
- 6-pin NEM interface
- Engine with 2 flywheels
- Drive on all axes
- Fine printing and detailing

Car Set TEE CAPITOLE SNCF Ep.IV

79.99 EUR^*

Art.-no. Minitrix_15691

Minitrix

Prototype: Grand Comfort car. 2 large-capacity cars of the first class, the French national railways (SNCF). Use: TEE trains in France.

Model: with kinematics for short coupling. Total length over buffer 318 mm.

One-time series

3-pc. Passenger car set ÖBB era III / IV

103.90 EUR (RRP*)

69.99 EUR^*

Art.-no. Jaegerndorfer_JC60310

Jägerndorfer

Set with three two-axle passenger cars type Bi. Different inscriptions, half window variations, 1x half window, 2x full window

Based on the experiences made before the war, ÖBB developed the program for the production of railcar wagons at the end of the 1940s. With as few, uniquely designed parts as possible, one should try to replace the wooden boxes of the largest possible number of old buildings with steel structures. Basically, it was decided to build all two- and three-axle vehicles uniformly as a two-axle vehicle. The body frame was made of prefabricated frame "frames", which consisted of commercial rolled profiles made. In the design of the interior, it was decided for a metropolitan area with the seat division 2 + 2. The conversion program was in addition to two- and three-axle Austrian designs and vehicles of German Länderbahnbauarten that had remained at the end of the war on the territory of Austria included.

3-pc. Passenger car set ÖBB era III / IV

103.90 EUR (RRP*)

69.99 EUR^*

Art.-no. Jaegerndorfer_JC60320

Jägerndorfer

Set with three two-axle passenger cars type Bi. Different inscriptions, half window variations, 2x half windows, 1x full window

Based on the experiences made before the war, ÖBB developed the program for the production of railcar wagons at the end of the 1940s. With as few, uniquely designed parts as possible, one should try to replace the wooden boxes of the largest possible number of old buildings with steel structures. Basically, it was decided to build all two- and three-axle vehicles uniformly as a two-axle vehicle. The body frame was made of prefabricated frame "frames", which consisted of commercial rolled profiles made. In the design of the interior, it was decided for a metropolitan area with the seat division 2 + 2. The conversion program was in addition to two- and three-axle Austrian designs and vehicles of German Länderbahnbauarten that had remained at the end of the war on the territory of Austria included.

hot air balloon

40.84 EUR^*

Art.-no. Faller_232390

Faller

High! Dive into the everyday life with a balloon ride over your model landscape. In a yellow-red striped hot air balloon with plaited wicker basket you have the best overview of your entire landscape.

This kit contains: 26 individual parts in 3 colors and 1 construction manual. Use plastic glue for crafting FALLER EXPERT.

Dimensions:
Ø 97 x 135 mm

Figures Advent Calendar

36.99 EUR^*

Art.-no. Noch_36990

Noch

Contents: 28 figures

Grass Strips light and dark green

11.87 EUR^*

Art.-no. Noch_07125

Noch

Contents: 6 mm, two green tones 18 strips and 18 tufts

On the platform

19.99 EUR^*

Art.-no. Noch_12720

Noch

Small scenes - great effect!
Just in time for the start of the 2017 fashion season, the most popular decoration scenes are also available for TT and N. The decoration scenes from NOCH make your model landscape even more realistic. Whether on the train station or in the forest: the decoration scenes enliven every model landscape. Each set contains a small laser-cut building as a finished model as well as the matching figures as decoration.

Highlights
· High-quality laser cut models
· Already fixed and ready. Simply unpack and install!
· With elaborately handcoloured figures