N-Scale 08/2017: Arnold, Dapol, Oxford & Gaugemaster
Dear customer,
here our novelties and bargains:
|
6.99 EUR*
Art.-no. MU_N-A00095
Modellbahn Union
Set of 4 wall connectors suited for the pipes used with our pipe bridges. The set contains 2 large and 2 small connectors.
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color. |
|
7.99 EUR*
Art.-no. MU_N-A00129
Modellbahn Union
This highly detailed 3D printed set is made from grey resin and comes unpainted. The parts can be painted with the usual hobby paints such as Revell Enamel or Revell Aqua Color.
|
|
24.99 EUR*
Art.-no. MU_N-H00050
Modellbahn Union
Model of a modern kindergarten with colourfull prints and a playground for the childern. Combining this kit with our playground sets (MU_N-A00067, MU_N-A00148 oder MU_N-A00149) creates the perfect playing and learning spot for the childern on your layout.
|
|
199.90 EUR
(RRP**)
69.99 EUR*
Art.-no. Arnold_HN2281
Arnold
running number 156 003-6 System: DC |
|
199.90 EUR
(RRP**)
79.99 EUR*
Art.-no. Arnold_HN2282
Arnold
running number 156 001-0, livery traffic red/grey System: DC |
|
249.99 EUR
(RRP**)
149.99 EUR*
Art.-no. Minitrix_16371
Minitrix
Spur: Minitrix Epoche: IV Vorbild: Triebzug 183 252-6 der Deutschen Reichsbahn (DR), Achsfolge 2´Bo´2´, Baujahr ab 1935 als SVT 137 für die Deutsche Reichsbahn Gesellschaft (DRG), beige/rubinrote Ausführung. Einsatz: Bis 1975 Salontriebwagen der DDR-Regierung. Ab 1975 als Museumsfahrzeug für Sonderfahrten. Modell: Eingebauter Digital-Decoder zum Betrieb mit DCC, Selectrix und Selectrix 2. Motor mit Antrieb auf 2 Achsen im Jakobsdrehgestell integriert, beide Fahrzeughälften und Jakobsdrehgestell über Kinematik verbunden, daher vorbildgerecht enges Erscheinungsbild ohne Durchblick im geraden Zustand. Lichtwechsel weiß/rot, Spitzenbeleuchtung und Innenbeleuchtung mit LEDs. Gesamtlänge über Puffer 278 mm. Highlight: Innenbeleuchtung serienmäßig (nur im Digitalbetrieb schaltbar). |
|
119.90 EUR
(RRP**)
79.99 EUR*
Art.-no. Arnold_HN4203
Arnold
Set x 3 coaches, "München-Nürmberg-Express" DB
Ep. V-VI |
|
32.31 EUR*
Art.-no. Arnold_HN6368
Arnold
DR, 4-axle gas tank wagon, silver livery, for the carriage of butane
Period: IVa |
|
35.90 EUR
(RRP**)
21.99 EUR*
Art.-no. Arnold_HN6369
Arnold
DB, 4-axle gas tank wagon "Linde Technische Gase", white/orange, ep. IV
|
|
35.90 EUR
(RRP**)
21.99 EUR*
Art.-no. Arnold_HN6370
Arnold
4-axle tank wagon "DB Schenker", red/grey, epoch VI
|
|
123.99 EUR*
Art.-no. Dapol_2D-010-004
Dapol
equipped with: |
|
123.99 EUR*
Art.-no. Dapol_2D-010-005
Dapol
equipped with: |
|
123.99 EUR*
Art.-no. Dapol_2D-010-006
Dapol
equipped with: |
|
123.99 EUR*
Art.-no. Dapol_2D-010-007
Dapol
equipped with: |
|
115.99 EUR*
Art.-no. Dapol_2D-018-007
Dapol
Equipped with: |
|
115.99 EUR*
Art.-no. Dapol_2D-018-008
Dapol
Equipped with: |
|
115.99 EUR*
Art.-no. Dapol_2D-018-009
Dapol
Equipped with: |
|
115.99 EUR*
Art.-no. Dapol_2D-018-010
Dapol
Equipped with: |
|
5.99 EUR*
Art.-no. Oxford_NVWB001
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NVWB004
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NVW002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
4.99 EUR*
Art.-no. Oxford_NTEA001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
4.99 EUR*
Art.-no. Oxford_NTEA002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NMN001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NFX4002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NDS002
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NDS001
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_N105005
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NCV003
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NDEF009
Oxford
Diecast model, plastic & metal, comes ready assembled and painted in a nice display box
Dressed in dark military green with black chassis and black mudguards and featuring two radio aerials on either side of the bonnet, our understated little N scale Land Rover Defender looks all ready to tackle the rough military terrain. Registered 64-KJ 56, this hard top version features the Union Flag on the front bumper and the regimental crest on the back door. The interior is also moulded in dark green with black steering wheel. Other external features include black chassis, bumpers and wheel hub caps, as well as the inclusion of a spare wheel on the bonnet. The wheel centres reflect the main body colour. Also clearly defined, you will find the Land Rover badge and Defender lettering on the front of the bonnet above the radiator and on the offside rear wing. |
|
6.99 EUR
(RRP**)
3.99 EUR*
Art.-no. Oxford_NFT003
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
|
5.99 EUR*
Art.-no. Oxford_NLAN188010
Oxford
Diecast model, plastic metal, comes ready assembled and painted in a nice display box |
|
65.10 EUR*
Art.-no. Fleischmann_507377
Fleischmann
Replacement motor, brand new from the factory |
|
10.99 EUR*
Art.-no. Gaugemaster_PM-20
Gaugemaster
Designed with easy installation in mind, PM20 is placed parallel to your point-work and operates equally well orientated either way. PM20 works well with all popular modelling scales, and with the leading brands of track in the UK.
The magnetic coils are high-efficiency for reliable operation, needing much less current than most other brands. PM20 also has a plug-in harness that is very easy to use. Mounting screws are included. Fitting the PM20 is simplicity itself, because the harness is pre-terminated, and the PM20 tie-bar linkage just drops over the point 'tie-bar' pin. PM20 also has manual operation, so you can test it before fixing it down. If you fix your points directly to the board - You can simply fix the motor directly onto the board with the screws provided after placing the link over the end of the point tie-bar. If you use track-bed under your points - If the track bed is thin, you may be able to mount PM20 directly, but test first. Otherwise make a pad from card or similarly firm material to raise the PM20 to the correct height before mounting it. Wiring the PM20 - This is easy, as the PM20 features a reversible 3-way plug-in connector. the included harness can be extended with GMC-PM51 Point Motor Wire and GMC-PM50 Connection Boxes. Applying power to PM20 - This product is for low voltage use only, between 16v and 24v (AC or DC are both okay). Please use 1amp supply or greater. Ideally also use a Capacitor Discharge Unit such as the GMC-CDU or similar for optimum performance. As with all solenoids, this motor is designed for use with passing contact switches such as the GM510 Miniature Toggle Switch. Connection to a standard On-On swich (or a permanent connection or power source) will lead to irreversible damage. |
|
49.99 EUR*
Art.-no. Gaugemaster_BPPM-20
Gaugemaster
Designed with easy installation in mind, PM20 is placed parallel to your point-work and operates equally well orientated either way. PM20 works well with all popular modelling scales, and with the leading brands of track in the UK.
The magnetic coils are high-efficiency for reliable operation, needing much less current than most other brands. PM20 also has a plug-in harness that is very easy to use. Mounting screws are included. Fitting the PM20 is simplicity itself, because the harness is pre-terminated, and the PM20 tie-bar linkage just drops over the point 'tie-bar' pin. PM20 also has manual operation, so you can test it before fixing it down. If you fix your points directly to the board - You can simply fix the motor directly onto the board with the screws provided after placing the link over the end of the point tie-bar. If you use track-bed under your points - If the track bed is thin, you may be able to mount PM20 directly, but test first. Otherwise make a pad from card or similarly firm material to raise the PM20 to the correct height before mounting it. Wiring the PM20 - This is easy, as the PM20 features a reversible 3-way plug-in connector. Applying power to PM20 - This product is for low voltage use only, between 16v and 24v (AC or DC are both okay). Please use 1amp supply or greater. Ideally also use a Capacitor Discharge Unit such as the GMC-CDU or similar for optimum performance. As with all solenoids, this motor is designed for use with passing contact switches such as the GM510 Miniature Toggle Switch. Connection to a standard On-On swich (or a permanent connection or power source) will lead to irreversible damage. |
|
3.99 EUR*
Art.-no. Gaugemaster_GM599
Gaugemaster
- Preserves the life of blades
- Encourages accurate cutting - 3 layer PVC mat in sandwitch structure - Ensures no cracking or warping - No slip surface This cutting mat is constructed from a 3 layer PVC mat in sandwich structure that ensures no cracking or warping. The non slip surface of base holds paper firmly and prevents blade run and cutting error. The use of a cutting mat preserves the life of blades and encourages accurate cutting. |
|
2.99 EUR*
Art.-no. Gaugemaster_GM616
Gaugemaster
These razor knives come in 3 different sizes (small, medium & large) and feature locking system. The steel blades can be snapped off easily when required to expose the next sharp edge in line. For modelling, hobby & small DIY tasks. At this budget price, this item should be viewed as a disposable product.
|
|
3.99 EUR*
Art.-no. Gaugemaster_GM620
Gaugemaster
90 x 60 x 6mm. For use when preparing surfaces for painting or for removing excess flash from kits prior to construction. Lots of other applications too.
|
|
7.99 EUR*
Art.-no. Gaugemaster_GM637
Gaugemaster
These multipurpose universal scissors with reinforced cutting edges are suitable for tougher materials such as, card, textiles, rubbers, leathers & paper. Ideal for craft, hobby and general household use.
|
|
3.99 EUR*
Art.-no. Gaugemaster_GM639
Gaugemaster
Stainless steel 150mm / 6" flexi rule. Easy to read. Ideal for measuring projects as well as being used as a straight edge in conjunction with a marking or cutting tool
|
|
11.99 EUR*
Art.-no. Gaugemaster_GM657
Gaugemaster
This versatile tool includes the following 5 functions:
Protractor: For measuring and laying out angles Measuring tool: Can be used as a ruler, (4"/100mm). It has etched graduations in 64ths and in millimetres Centre finder: For locating centres on shafts and circles Circle divider: Is used for dividing circles into sectors, polygons and poly grams (up to 9 equal parts) Drill point gauge: For checking 59 degree angle points |
|
4.99 EUR*
Art.-no. Gaugemaster_GM659
Gaugemaster
A must have for any railway modellers tool box. This pump helps remove any unwanted solder by sucking it up the tube at the press of the button. It is simple and easy to use and keeps all of your soldering jobs neat and tidy.
|
Yours sincerely
Daniel Mrugalski
DM-Toys