N-Scale 07/2017: Kato, Dapol, Tomix, Greenmax, Tomytec

Easi-Fit magnetic couplings are an easy way to convert your NEM rolling stock for hands free remote coupling and uncoupling. This pack contain one pair of permanent Ferro magnets that fit between the rails of N gauge track. Their shape and activity have been optimised to ensure optimal uncoupling and coupling performance. Please note one or more sleepers will have to be removed prior to fitting.

Content: 10 couplers with medium arm (length pivot to coupler app. 5mm)

Information:
- full working knuckle couplers with pre-coupling function for shunting operations
- the couplers can be decoupled using magnets in the track
- can be used with all NEM-355 coupler pocket equipped models

Easi-Fit magnetic couplings are an easy way to convert your NEM rolling stock for hands free remote coupling and uncoupling. These are the medium arm variant and the pack contains five pairs of couplings. Knuckle length from the pocket front to the end of the knuckle approximately 7.6mm

Easi-Fit magnetic couplings are an easy way to convert your NEM rolling stock for hands free remote coupling and uncoupling. These are the long arm variant and the pack contains five pairs of couplings. Knuckle length from the pocket front to the end of the knuckle approximately 9.6mm

Pannier Tanks were used almost exclusively in Britain by the GWR. They were brought into service to replace earlier built and designed saddle tank locomotives. Their design offered the locomotive a low centre of gravity, reasonable range and easier access to the working of the locomotive. In all 863 were built between 1929 and 1950 and sixteen survive into preservation. Eleven 5700 saddle tanks were bought by London Transport for use on shunting duties on the London Underground Network. These were numbered L89 to L99 and continued in service until 1971. The locomotives durability and functionality is attested by the fact that the last locomotive in service was used well into the 1970’s by the National Coal Board at the Deep Duffryn Colliery at Mountain Ash.

Equipped with:
- finely moulded body with many separately added fine details
- DCC Ready (We think this is the smallest DCC Ready Locomotive in the UK)
- cast wheels with fine relief and appropriate colouring
- tungsten chassis and all wheel pick up
- includes Magnetic Couplers Fitted (Standard couplers are in the accessory bag)
- accessory bag with spares and other added detail

Pannier Tanks were used almost exclusively in Britain by the GWR. They were brought into service to replace earlier built and designed saddle tank locomotives. Their design offered the locomotive a low centre of gravity, reasonable range and easier access to the working of the locomotive. In all 863 were built between 1929 and 1950 and sixteen survive into preservation. Eleven 5700 saddle tanks were bought by London Transport for use on shunting duties on the London Underground Network. These were numbered L89 to L99 and continued in service until 1971. The locomotives durability and functionality is attested by the fact that the last locomotive in service was used well into the 1970’s by the National Coal Board at the Deep Duffryn Colliery at Mountain Ash.

Equipped with:
- finely moulded body with many separately added fine details
- DCC Ready (We think this is the smallest DCC Ready Locomotive in the UK)
- cast wheels with fine relief and appropriate colouring
- tungsten chassis and all wheel pick up
- includes Magnetic Couplers Fitted (Standard couplers are in the accessory bag)
- accessory bag with spares and other added detail

Equipped with:
- finely moulded body with many separately added fine details
- cast wheels with fine relief and appropriate colouring
- tungsten chassis and all wheel pick up
- NEM coupler pockets
- standard N couplers

Equipped with:
- finely moulded body with many separately added fine details
- cast wheels with fine relief and appropriate colouring
- tungsten chassis and all wheel pick up
- NEM coupler pockets
- standard N couplers

The British Rail Class 33 is a class of Bo Bo diesel-electric Locomotive built by BRCW for the Southern Region of British Railways between 1960 and 1962. A total of 98 Class 33s were originally built and bore the numbers D6500 to D6597. The Class was affectionately known as Cromptons after the  Crompton Parkinson electrical equipment installed in them. They shared many features with their lesser powered sisters the Class 26 and Class 27. In all 26 examples of the class 33 survive into preservation.

Equipped with:
- flywheel
- Finescale wheels
- Dapol Super Creep Motor
- headlight change
- DCC plug
- NEM coupler pockets
- standard-N-couplers

Version without buffers

Equipped with:
- NEM coupler pockets
- standard N couplers
- interior detailing
- prepared for interior lighting

Version without buffers

Equipped with:
- NEM coupler pockets
- standard N couplers
- interior detailing
- prepared for interior lighting

Equipped with:
- flywheel
- Finescale wheels
- Dapol Super Creep Motor
- headlight change
- DCC plug
- NEM coupler pockets
- standard-N-couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers
- optional knuckle couplers

Equipped with:
- NEM-coupler pockets
- standard N couplers
- optional knuckle couplers

Equipped with:
- NEM-coupler pockets
- standard N couplers
- optional knuckle couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Equipped with:
- standard N couplers

Set with:
- B Set coach No. W6975W
- B Set coach No. W6976W

Equipped with:
- standard N couplers
- interior detailing

Version with buffers

equipped with:
- NEM coupler pockets
- standard N couplers
interior detailing
- prepared for interior lighting

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

equipped with:
- headlight change
- standard N couplers

no motor

Content: 2 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: 2 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

- 3 next form of EH500 that are Bei increase from 2002 (2002), the GPS antenna
And is mounted, some changes have been made. EH500 is a tandem ever
Increase Bei continued to replace and ED75 · ED79, and EF65 which had been active
Have.
- The adoption of flywheel power unit, the driving performance and smooth powerful
Exhibited.
- The faithful reproduction of the actual vehicle specifications of the vehicle body 2 consolidated and 8-axis drive.
- I express accurately the beautiful coloring-a virile body, heavy truck around.
- Beautiful and represent the body and notation [Kintaro] logo.
- Adopt to the headlight high brightness white LED.

Equipped with:
- motor
- flywheel
- headlight change
- pantographs
- friction tyres
- standard N couplers

Equipped with:
- motor
- flywheel
- headlight change
- pantographs
- friction tyres
- standard N couplers

Equipped with:
- motor
- flywheel
- headlight change
- pantographs
- friction tyres
- standard N couplers

Set with 2 cars

Equipped with:
- taillight
- standard N couplers

content: 8 car freight wagon set

equipped with: standard N couplers

Content: 10 car set

equipped with:
- different interior detailing
- rear lights
- knuckle couplers

Content: 7 car set

equipped with:
- different interior detailing
- rear lights
- knuckle couplers

Content: set with 8 cars

equipped with:
- motor
- flyhweel
- headlight change
- Scharfenberg couplers

Set with 3 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

addition with 3 cars

Equipped with:
- Scharfenberg-couplers

Set with 2 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 4 cars

Equipped with:
- Scharfenberg-couplers

Set with 6 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 6 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Content: addition set with 4 cars

Equipped with:
- Scharfenberg-couplers

Content: set with 3 cars

equipped with:
- Scharfenberg couplers

Content: set with 4 cars

equipped with:
- Scharfenberg couplers

Set with 7 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 6 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 6 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 8 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

Set with 6 cars

Equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg-couplers

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers
- special edition case with japanese Artbook and DVD

Content: 6 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: 7 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: 4 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: 8 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: 6 car trainset

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers
- knuckle couplers on the end cars

german production, very high product quality, newest LED technology

Content: 1 plastic model kit

finish:
- unpainted plastic model kit
- Scale 1:150
- length: 647mm, width: 153mm, height: 375mm
- japanese and english manual

Content: 2 tunnel portals for double track

Finish:
- plastic kit
- unpainted

content: 2 working platforms

finish:
- plastic kit
- unpainted
- length 140mm each

with japanese manual

content: 4 working platforms

finish:
- plastic kit
- unpainted
- length 35mm each

with japanese manual

content: 2 working platforms

finish:
- plastic kit
- unpainted
- length 140mm each

with japanese manual

content: 2 working platforms

finish:
- plastic kit
- unpainted
- length 140mm each

with japanese manual

content: 2 working platforms

finish:
- plastic kit
- unpainted
- length 140mm each

with japanese manual

content: 1 washing facility for rolling stock

finish:
- plastic kit
- unpainted

with japanese manual

Content: four straight tracks, length each 140mm

Content: four straight tracks, length each 72,5mm

Content: four straight tracks, length each 70mm

Content: four straight tracks, length each 99mm

Content: four straight tracks, length each 158,5mm

Version with wooden sleepers

content: ten straight tracks, length each 280mm

Version with concrete sleepers

content:
- four curved tracks
- radius 605mm
- 10 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 280mm
- 45 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 317mm
- 45 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 541mm
- 15 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 280mm
- 15 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 243mm
- 45 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 354mm
- 45 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 317mm
- 15 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 391mm
- 45 degrees

Version with concrete sleepers

Content: two straight tracks length 140mm, one with road crossing parts and re-railing function.

Content: four straight tracks, length each 35mm

joiner for connection with third-party N gauge tracks

Content: four straight tracks, length each 35mm

joiner for connection with third-party N gauge tracks

Version with wooden sleepers

Version with wooden sleepers

content:
- four curved tracks
- radius 280mm
- 15 degrees

Version with wood sleepers

content:
- four curved tracks
- radius 391mm
- 45 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 243mm
- 15 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 354mm
- 15 degrees

Version with concrete sleepers

content:
- four curved tracks
- radius 391mm
- 15 degrees

Version with wood sleepers

content:
- four curved tracks
- radius 605mm
- 10 degrees

Overhead Wire Mast for Double Tracks 6pcs

Content:
- ten piers from 10mm to 55mm height
- crossing height 55mm

Content: four straight tracks, length each 280mm

Content: 8 straight tracks, guardrails and connection clips for the roadbed

Description:
- length each 70mm
- with tram style roadbed

Working with the standard Tomix track range and with track from the wide-track series.

Might also be used as double track.

Content: 4 straight tracks and connection clips for the roadbed

Description:
- length each 70mm
- with tram style roadbed

Working with the standard Tomix track range and with track from the wide-track series.

Might also be used as double track.

equipped with: standard N couplers

works with the smalles Tomix radius with 103mm

10 rails with clips + power connection

equipped with:
- motor
- flywheel
- headlight change
- open drivers cab
- accessory parts
- standard N couplers
- optional knuckle couplers

equipped with:
- motor
- flywheel
- headlight change
- accessory parts
- pantographs
- standard N couplers
- optional knuckle couplers

Content: 4 car trainset

equipped with:
- motor
- flywheel
- headlight change
- movable pantographs
- knuckle couplers

Content: unmotorized model

equipped with:
- headlight change
- knuckle couplers

Content: 2 car trainset

equipped with:
- motor
- flywheel
- headlight change
- knuckle couplers

Content: 2 car trainset

equipped with:
- motor
- flywheel
- headlight change
- knuckle couplers

Content: 2 car trainset

equipped with:
- motor
- flywheel
- headlight change
- knuckle couplers

content: 3 car trainset

equipped with:
- motor
- flywheel
- headlight change white-red
- standard N couplers
- Scharfenberg couplers on the end cars

Content: 2 car addition

equipped with:
- standard N couplers
- Scharfenberg couplers on the end cars

Content: 5 car trainset

equipped with:
- motor
- flywheel
- headlight change
- knuckle couplers

content: 3 car trainset

equipped with:
- motor
- flywheel
- headlight change white-red
- Scharfenberg couplers

Content: 4 car trainset

equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg couplers

Content: 4 car trainset

equipped with:
- motor
- flywheel
- headlight change
- Scharfenberg couplers

Content: 2 car addition

equipped with:
- Scharfenberg couplers

Content: 6 car basic set

equipped with:
- motor
- flywheel
- headlight change
- couplers with electric connection

Content: 6 car basic set

equipped with:
- motor
- flywheel
- headlight change
- standard N couplers

Content: set with 2 cars

equipped with:
- standard N couplers
- box with space for more models

Content: 10 car basic set

Limited Edition

equipped with:
- motor
- flywheel
- headlight change
- couplers with electric connection
- Scharfenberg couplers at one train end

Content: 7 car basic set

Limited Edition

equipped with:
- motor
- flywheel
- headlight change
- couplers with electric connection
- Scharfenberg couplers at one train end

Finish:
- snap kit
- fully decorated and painted
- building is decorated neutral ex factory
- letterings shown on the picture are included as a decalsheet
- dimensions: 20x8x11cm

equipped with:
- motor
- flywheel
- powered on four axles
- additional weights
- different bogie covers
- standard N couplers

dimensions: Length 67mm, width 15mm, bogie distance (center) 38mm, axle distance inside bogie 16mm, wheel diameter 6mm

Finish:
- snap kit
- fully painted and decorated

Size: building 9x3x5cm, maximum platform length 39cm, width 2,5cm

Content: two buildings in versions as shown on the picture

4th colour version of these buildings

Finish:
- Plastic snap kit
- fully coloured, decorated and weathered

Size: 5x6x6 cm and 5x6x6 cm

Content: two buildings in versions as shown on the picture

4th colour version of these buildings

Finish:
- Plastic snap kit
- fully coloured, decorated and weathered

Size: 5x7x6 cm and 5x6x6 cm

Content: two buildings in versions as shown on the picture

4th colour version of these buildings

Finish:
- Plastic snap kit
- fully coloured, decorated and weathered

Size: 5x6x6 cm and 6x5x7 cm

Finish:
- Display model
- completely coloured and assembled
- with moving pantograph

THE MODEL CAN BE CONVERTED TO A FULL WORKING MODEL USING THE OPTIONAL CHASSIS TM-TR03.

You can convert the model by simply snapping the body onto the motor chassis. The motorunit is NOT part of this offer and must be ordered seperately.

Finish:
- Plastic snap kit
- fully coloured, decorated and weathered

Size: 7x15x6 cm

straight track not included

Finish:
- Display model
- completely coloured and assembled
- with moving pantograph

THE MODEL CAN BE CONVERTED TO A FULL WORKING MODEL USING THE OPTIONAL CHASSIS TM-19.

You can convert the model by simply snapping the body onto the motor chassis. The motorunit is NOT part of this offer and must be ordered seperately.

Content: Set with 8 figures

Finish: Plastic models, completely painted and decorated

Content: Set with 11 figures and accessories

Finish: Plastic models, completely painted and decorated

Finish:
- Fully assembled and decorated
- spinning wheels

Finish:
- Fully assembled and decorated
- spinning wheels

Works with the Tomytec Bus system. Please use motor chassis BM-02R Tomytec_263913 sold separately.

Finish:
- Fully assembled and decorated
- spinning wheels

Works with the Tomytec Bus system. Please use motor chassis BM-03 Tomytec_253365 sold separately.

equipped with:
- motor
- flywheel powered on two axles
- front bogie can be fixed in different positions

dimensions: length 68mm, axle distance inside bogie 9,2mm, bogie distance (center) adjustable to 36mm, 38,6mm or 41,2mm

The chassis runs on curve radii 103mm or greater

Finish:
- snap kit
- fully decorated and painted
- with decal sheet

The banner mounted to the building is removable.

Size: Width 12 x Depth 13 x Height 10cm

Finish:
- Display model
- completely coloured and assembled
- with moving pantograph

THE MODEL CAN BE CONVERTED TO A FULL WORKING MODEL USING THE OPTIONAL CHASSIS TM-TR03.

You can convert the model by simply snapping the body onto the motor chassis. The motorunit is NOT part of this offer and must be ordered seperately.

Finish:
- 2 snap kits
- fully painted and decorated
- with decal sheet
- Size: 7x6x6cm and 7x6x6cm

Content: Set with 12 figures

Finish: Plastic models, completely painted and decorated

Finish:
- snap kit
- fully painted and decorated
- with decal sheet
- Size: 15x15x9cm

Content: Set with 12 figures

Finish: Plastic models, completely painted and decorated

Finish:
- display model
- fully coloured and assembled
- can be motorized

Content:
- 2 models as special releases from the Bus Collection Series
- Mitsubishi Fuso Aero Star bus
- Isuzu erga Mio Bus

Finish:
- Fully assembled and decorated
- spinning wheels

Finish:
- Display model
- completely coloured and assembled
- with moving pantograph

THE MODEL CAN BE CONVERTED TO A FULL WORKING MODEL USING THE OPTIONAL CHASSIS TM-LRT04.

You can convert the model by simply snapping the body onto the motor chassis. The motorunit is NOT part of this offer and must be ordered seperately.

Content:
- 3 models as special releases from the Bus Collection Series
- Mitsubishi Fuso Aero Bus KL-MS86MP
- Mitsubishi Fuso Aero Ace QTG-MS96VP
- Isuzu Erga Nonstep Bus LKG-LV234L3

Finish:
- Fully assembled and decorated
- spinning wheels

Works with the Tomytec Bus system. Please use motor chassis BM-03 Tomytec_253365 and BM-01 Tomytec_232124 for Isuzu Erga Nonstep Bus sold separately.

content: one electric train and one bus model

finish:
- display model
- fully coloured and assembled
- can be motorized

Content:
- 3 models as special releases from the Bus Collection Series
- Hino Selega R KL-RU4FSEA
- Hino Blue Ribbon KC-HT2MPCA
- Hino Selega U-RU2FRAB

Finish:
- Fully assembled and decorated
- spinning wheels

Works with the Tomytec Bus system. Please use motor chassis BM-03 Tomytec_253365 and BM-02R Tomytec_263913 for Hino Blue Ribbon KC-HT2MPCA sold separately.

Content: 1 plastic model kit

finish:
- unpainted plastic model kit
- Scale 1:150
- length: 83mm, width: 83mm, height: 70mm
- japanese manual

Content: 1 plastic model kit

finish:
- unpainted plastic model kit
- Scale 1:150
- with decal sheet
- japanese manual

finish:
- ready made model
- coloured
- doors can be opened
- with load