N-Scale 06/2026: Clearance stock from REE, Jägerndorfer, and Oxford; affordable decoders

9.99 EUR^*

Art.-no. MU_N-H00419

Modellbahn Union

A kit of the legendary fish fry on the Veddel peninsula in Hamburg, located right next to the former customs office in the free port. The restaurant still exists today.

29.99 EUR^*

Art.-no. MU_N-L00342

Modellbahn Union

Three arcades with arched masonry, including a four-track roadway without pillars and railings. Railings are included as an accessory. Can be built as a four-track or two-track line.

Old MKB article number 160817

23.99 EUR^*

Art.-no. DH_PD10MU-3

Doehler & Haass

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.

Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each

functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2

The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

23.99 EUR^*

Art.-no. DH_PD10MU-4

Doehler & Haass

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.

Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

Dimensions: 8.5 x 11.7 x 1.8mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each

functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimum adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2

The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

22.99 EUR^*

Art.-no. DH_PD18MU

Doehler & Haass

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically. The decoder has only 2 function outputs (AUX1&AUX2), AUX3-6 are not assigned!

Due to our direct sales and exclusive production, we can offer this decoder in cooperation with Doehler and Haass at a very attractive price.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

Dimensions: 9.0 x 9.7 x 2.9mm
Total load capacity: 1.0 A
Maximum Motor Current: 1.0A
Maximum driving voltage: 30 V
Light function outputs: LV, LR (dimmable): 150 mA each
Function outputs: AUX1, AUX2 (dimmable): 300 mA each

functions
• For operation with conventional DC traction device, digital systems according to the NMRA standard (DCC)
• Switching between analogue and digital operation is automatic
• Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Latest generation load control, resulting in particularly smooth control behavior
• Various control variants for optimal adaptation to the engine
• Internally 127 speed steps
• Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)
• Block section operation with simple diodes in digital operation
• Light and function outputs (partially) dimmable and can be activated analogously
• Shunting gear
• Motor, light and track connections can be exchanged electronically
• All function outputs freely programmable
• Temperature protection
• Reset function for DCC
• The decoder can be updated
• Timer for switching off AUX1 and AUX2

The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out either via the FCC digital center or the programmer. If no appropriate hardware is available, Doehler & Haass will provide a programmer on request.

The vehicle decoders support braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel, Lenz ABC), slow travel (with suitable braking modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

9.99 EUR (RRP*)

6.99 EUR^*

Art.-no. DM-Toys_6001

DM-Toys

Our Topseller finally available again with a new extensive print!

True to original reproduction of the construction vehicle of the company Caterpillar in scale N 1: 160.

Detailed model of die-cast metal and plastic
- High quality metal construction
- Many movements possible
- Many operational procedures adjustable

29.99 EUR (RRP*)

19.99 EUR^*

Art.-no. DM-Toys_8501

DM-Toys

Ready-made model with rotating wheels and a rotating and 3-section extendable ladder

149.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Jaegerndorfer_JC60000-1

Jägerndorfer

The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.

Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing

149.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Jaegerndorfer_JC60000-4

Jägerndorfer

The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.

Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing

224.90 EUR (RRP*)

169.99 EUR^*

Art.-no. Jaegerndorfer_JC60002-1

Jägerndorfer

The ÖBB Class 2043 is a four-axle diesel-hydraulic locomotive that was procured in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the ÖBB's non-electrified lines. It was primarily used on branch lines and hauled both freight and passenger trains.

Model properties:
– detailed explanation taking into account all design differences
– Light change white/red
– equipped with Zimo sound decoder from the factory
– extensive and detailed printing

224.90 EUR (RRP*)

169.99 EUR^*

Art.-no. Jaegerndorfer_JC60002-4

Jägerndorfer

The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.

Model features:
– detailed design taking into account all design differences
– Light change white/red
– factory fitted with Zimo sound decoder
– extensive and detailed printing

284.90 EUR (RRP*)

169.99 EUR^*

Art.-no. Jaegerndorfer_JC63300

Jägerndorfer

Model features:
– Drive via coupling rods
– six-pin interface according to NEM 651
– Triple headlights with changing lights
– Minimum drivable radius: 225 mm
– LüP: 80 mm

419.90 EUR (RRP*)

249.99 EUR^*

Art.-no. Jaegerndorfer_JC63302

Jägerndorfer

Model features:
– Drive via coupling rods
– Equipped with sound ex works
– Triple headlights with changing lights
– Minimum drivable radius: 225 mm
– LüP: 80 mm

434.90 EUR (RRP*)

249.99 EUR^*

Art.-no. Jaegerndorfer_JC73010

Jägerndorfer

- Color: ivory/blue
- Model with light change
- Control car with 6-pin interface
- 2 different intermediate carriages
- Printed Transalpin signs

554.90 EUR (RRP*)

349.99 EUR^*

Art.-no. Jaegerndorfer_JC73012

Jägerndorfer

- Equipped with sound ex works
- Color: ivory/blue
- Model with light change
- Control car with 6-pin interface
- 2 different intermediate carriages
- Printed Transalpin signs

199.90 EUR (RRP*)

119.99 EUR^*

Art.-no. REE_NW-295

REE Models

209.90 EUR (RRP*)

124.99 EUR^*

Art.-no. REE_NW-296

REE Models

209.90 EUR (RRP*)

124.99 EUR^*

Art.-no. REE_NW-297

REE Models

124.99 EUR^*

Art.-no. REE_NW-298

REE Models

214.90 EUR (RRP*)

129.99 EUR^*

Art.-no. REE_NW-301

REE Models

214.90 EUR (RRP*)

129.99 EUR^*

Art.-no. REE_NW-302

REE Models

79.00 EUR (RRP*)

49.99 EUR^*

Art.-no. REE_NW-303

REE Models

39.90 EUR (RRP*)

24.99 EUR^*

Art.-no. REE_NW-307

REE Models

39.90 EUR (RRP*)

24.99 EUR^*

Art.-no. REE_NW-311

REE Models

39.90 EUR (RRP*)

24.99 EUR^*

Art.-no. REE_NW-315

REE Models

79.00 EUR (RRP*)

49.99 EUR^*

Art.-no. REE_NW-317

REE Models

79.00 EUR (RRP*)

49.99 EUR^*

Art.-no. REE_NW-320

REE Models

179.00 EUR (RRP*)

161.10 EUR^*

Art.-no. Minitrix_15462

Minitrix

Prototype: Three 2nd-class express train passenger cars, type Bmmz 264.4F and 264.4. Light green basic paint scheme. Privately owned cars owned by Trainpool GmbH & Co. KG, leased to FlixTrain GmbH, Munich. They looked as they did around 2020.

Model: All cars have close coupling mechanisms. Prepared for the retrofitting of interior lighting.
Total length over buffers 495 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a prototypical train with the locomotive of the class 193, item number 16835, and with the express train carriages from 15462 and 15797.

59.99 EUR (RRP*)

53.99 EUR^*

Art.-no. Minitrix_15797

Minitrix

Prototype: Type Bmmdz 268.7F 2nd class express train passenger car. Light green basic paint scheme. Privately owned car owned by Trainpool GmbH & Co. KG, leased to Flixtrain GmbH, Munich. The car looks as it did around 2020.

Model: The car features close coupling mechanism. Prepared for the retrofitting of interior lighting.
Length over buffers 165 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a prototypical train with the locomotive of the class 193, item number 16835, and with the express train carriages from 15462 and 15797.

7.99 EUR^*

Art.-no. Oxford_NCA021

Oxford

Ready-made model in an attractive display packaging. Vehicle with rotating wheels and a fine paint job.

7.99 EUR^*

Art.-no. Oxford_NDS002

Oxford

7.99 EUR^*

Art.-no. Oxford_NDS004

Oxford

7.99 EUR^*

Art.-no. Oxford_NFT006

Oxford

7.99 EUR^*

Art.-no. Oxford_NMGB001

Oxford

Diecast model, plastic [&] metal, comes ready assembled and painted in a nice display box.

Registered 419 FCR, our model is decorated in bright red with a mass of chrome to the exterior and comes with hood down to reveal the black interior and black tonneau cover. Note the distinctive MGT badge in red and silver on the boot and again in red, black and silver above the radiator grille.

7.99 EUR^*

Art.-no. Oxford_NMN001

Oxford

7.99 EUR^*

Art.-no. Oxford_NMN005

Oxford

19.99 EUR^*

Art.-no. Oxford_NSHL01TK

Oxford

Ready-made model in an attractive display packaging. Vehicle with rotating wheels and a fine paint job.

19.99 EUR^*

Art.-no. Oxford_NVOL4007

Oxford

Finished model in an attractive display packaging. Vehicle with rotating wheels and a fine paint job. The ramps of the low loader are movable and can represent both driving and loading situations.

7.99 EUR^*

Art.-no. Oxford_NVW002

Oxford

7.99 EUR^*

Art.-no. Oxford_NVWB002

Oxford

7.99 EUR^*

Art.-no. Oxford_NVWS009

Oxford

Finished model in an attractive display box. Vehicle with rotating wheels and a fine paint finish.