Largest N gauge range
All products available
Fast shipping
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 06/2026: Noch, Faller, VT95, TEE Rheinpfeil
Dear customer,
The heat isn't stopping our suppliers—or us—from continuing to make deliveries diligently!
209.90 EUR
(RRP*)
188.91 EUR*
Art.-no. Fleischmann_7760005
Fleischmann
Railbus set class VT 95/VB 142, of the German Federal Railway.
Update!
- For the first time with Next18 interface and LED peak light on the lower lamps
- No disruptive cable connection between the two units
- Skylight above the driver's cab
- Attached 3rd top light
The red railbuses appeared on the scene in the 1950s as the "saviors of branch lines." The prototype for the Fleischmann model is the single-engine railbus VT 95 with the trailer VB 142, which is shorter than the motor car. A VT 95 with trailer VB 142 is still in service today as a museum vehicle with Deutsche Bahn (DB). Because the trailer car in the prototype was not equipped as a so-called control car with a driver's cab, the railbus, when operating in two-car formation, did not run as a permanently coupled push-pull train, but always with the motor car leading. The motor car therefore had to be turned around at the destination station.
Update!
- For the first time with Next18 interface and LED peak light on the lower lamps
- No disruptive cable connection between the two units
- Skylight above the driver's cab
- Attached 3rd top light
The red railbuses appeared on the scene in the 1950s as the "saviors of branch lines." The prototype for the Fleischmann model is the single-engine railbus VT 95 with the trailer VB 142, which is shorter than the motor car. A VT 95 with trailer VB 142 is still in service today as a museum vehicle with Deutsche Bahn (DB). Because the trailer car in the prototype was not equipped as a so-called control car with a driver's cab, the railbus, when operating in two-car formation, did not run as a permanently coupled push-pull train, but always with the motor car leading. The motor car therefore had to be turned around at the destination station.
329.90 EUR
(RRP*)
296.91 EUR*
Art.-no. Fleischmann_7160037
Fleischmann
Steam locomotive 150.Y.3 of the French State Railways.
- Variant with wind deflectors
- Leading wheels with spokes
- Z21 driver's cab available
- Variant with wind deflectors
- Leading wheels with spokes
- Z21 driver's cab available
339.00 EUR
(RRP*)
305.10 EUR*
Art.-no. Minitrix_16724
Minitrix
Prototype: Electric locomotive 111 018-8. Wheel arrangement Bo'Bo'. Built from 1974 onwards. Version with "Contemporary Art".
Highlights:
- Housing made of die-cast zinc
- Digital sound with many features
- Cab lighting
Model: Die-cast zinc body and frame. Built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles driven, traction tires. Headlights and taillights change with the direction of travel, with warm white LEDs, cab lighting, digitally switchable. Close coupling mechanism. Length over buffers 104 mm.
A suitable passenger car set is available under article number 18264.
Highlights:
- Housing made of die-cast zinc
- Digital sound with many features
- Cab lighting
Model: Die-cast zinc body and frame. Built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles driven, traction tires. Headlights and taillights change with the direction of travel, with warm white LEDs, cab lighting, digitally switchable. Close coupling mechanism. Length over buffers 104 mm.
A suitable passenger car set is available under article number 18264.
199.00 EUR
(RRP*)
179.10 EUR*
Art.-no. Minitrix_15368
Minitrix
Prototype: 1 type Avümh 111 compartment car, 1 type ADümh 101 TEE observation car with a panorama compartment as the upper deck, and 1 type Apümz 121 open-plan car as they did in summer 1971, of the German Federal Railway (DB) for the TEE "Rheinpfeil."
Highlights: Famous train route
Model: The cars have a close-coupling mechanism. The Avümh 111 and Apümz 121 are prepared for the retrofitting of interior lighting. Total length over the buffers 495 mm.
The matching interior lighting: 66610 LED interior lighting.
The matching locomotive can be found under item number 16269 Series 112.
Highlights: Famous train route
Model: The cars have a close-coupling mechanism. The Avümh 111 and Apümz 121 are prepared for the retrofitting of interior lighting. Total length over the buffers 495 mm.
The matching interior lighting: 66610 LED interior lighting.
The matching locomotive can be found under item number 16269 Series 112.
159.00 EUR
(RRP*)
143.10 EUR*
Art.-no. Minitrix_15369
Minitrix
Prototype: 1 type Avümh 111 compartment car and 1 type WRümh TEE dining car with a two-story service area, as they did in summer 1971, of the German Federal Railway (DB) for the TEE "Rheinpfeil".
Highlights: Famous train route and LED rear signal
Model: The car has a close-coupling mechanism and is prepared for the retrofitting of interior lighting. The Avümh 111 has a built-in LED end signal. Total length over the buffers: 330 mm.
The matching interior lighting: 66610 LED interior lighting.
The matching locomotive can be found under item number 16269 Series 112.
Highlights: Famous train route and LED rear signal
Model: The car has a close-coupling mechanism and is prepared for the retrofitting of interior lighting. The Avümh 111 has a built-in LED end signal. Total length over the buffers: 330 mm.
The matching interior lighting: 66610 LED interior lighting.
The matching locomotive can be found under item number 16269 Series 112.
179.99 EUR
(RRP*)
159.99 EUR*
Art.-no. Dapol_2D-004-012
Dapol
Model of a Class 56 diesel locomotive in 1:148 scale, in Transrail livery. The model impresses with numerous details faithfully reproduced from the prototype, a high level of detail on the locomotive body, and excellent running characteristics.
Features:
- Model in 1:148 scale
- Analog DC model
- NEM couplings
- Highly detailed workmanship
- Revised body with improved body shape, cab roof and windows
- Tooling options for the precise reproduction of both Romanian and Doncaster body types.
- Etched side and roof grilles in two versions
- RP25.72 darkened wheels with needle bearings
- Dapol's low-friction mechanism for efficient and quiet operation
- Heavy-duty, split frame chassis for excellent driving and transport characteristics
- Directional lighting
- Next18 electrical interface
Features:
- Model in 1:148 scale
- Analog DC model
- NEM couplings
- Highly detailed workmanship
- Revised body with improved body shape, cab roof and windows
- Tooling options for the precise reproduction of both Romanian and Doncaster body types.
- Etched side and roof grilles in two versions
- RP25.72 darkened wheels with needle bearings
- Dapol's low-friction mechanism for efficient and quiet operation
- Heavy-duty, split frame chassis for excellent driving and transport characteristics
- Directional lighting
- Next18 electrical interface
179.99 EUR
(RRP*)
159.99 EUR*
Art.-no. Dapol_2D-004-013
Dapol
Model of a Class 56 diesel locomotive in 1:148 scale, in EWS livery. The model impresses with numerous details faithfully reproduced from the prototype, a high level of detail on the locomotive body, and excellent running characteristics.
Features:
- Model in 1:148 scale
- Analog DC model
- NEM couplings
- Highly detailed workmanship
- Revised body with improved body shape, cab roof and windows
- Tooling options for the precise reproduction of both Romanian and Doncaster body types.
- Etched side and roof grilles in two versions
- RP25.72 darkened wheels with needle bearings
- Dapol's low-friction mechanism for efficient and quiet operation
- Heavy-duty, split frame chassis for excellent driving and transport characteristics
- Directional lighting
- Next18 electrical interface
Features:
- Model in 1:148 scale
- Analog DC model
- NEM couplings
- Highly detailed workmanship
- Revised body with improved body shape, cab roof and windows
- Tooling options for the precise reproduction of both Romanian and Doncaster body types.
- Etched side and roof grilles in two versions
- RP25.72 darkened wheels with needle bearings
- Dapol's low-friction mechanism for efficient and quiet operation
- Heavy-duty, split frame chassis for excellent driving and transport characteristics
- Directional lighting
- Next18 electrical interface
179.99 EUR
(RRP*)
159.99 EUR*
Art.-no. Dapol_2D-087-005
Dapol
From 1973, 36 locomotives of the 87 series were put into service for operation on the newly electrified northern section of the West Coast Main Line to Glasgow. These locomotives were based on the proven 86 series, featured a modernized design, and produced 5000 hp. The last locomotive built was overhauled to test a new thyristor control system and was numbered 87101.
With the new Mark 3 carriages, the 87 trains became known as the "Electric Scots" and significantly reduced journey times between Euston and Glasgow.
The Class 87 locomotives operated on the front lines for British Rail until 2005, and later for Virgin Trains, when they were replaced by Pendolino electric multiple units. Many locomotives were transferred to other operators or exported.
Dapol would like to thank the 87035 Group at the Crewe Heritage Centre for their invaluable help in granting them access to their locomotive.
The Dapol series 87 is characterized by the following features:
- Finely detailed body and roof with many additional attachments
- 5-pole super creeper motor with incredibly controllable slow-running speed
- All-wheel drive and pickup
- Finely detailed (movable/non-functional) high-speed and crossbeam pantographs (as required)
- Accessory bag with optional matching parts
With the new Mark 3 carriages, the 87 trains became known as the "Electric Scots" and significantly reduced journey times between Euston and Glasgow.
The Class 87 locomotives operated on the front lines for British Rail until 2005, and later for Virgin Trains, when they were replaced by Pendolino electric multiple units. Many locomotives were transferred to other operators or exported.
Dapol would like to thank the 87035 Group at the Crewe Heritage Centre for their invaluable help in granting them access to their locomotive.
The Dapol series 87 is characterized by the following features:
- Finely detailed body and roof with many additional attachments
- 5-pole super creeper motor with incredibly controllable slow-running speed
- All-wheel drive and pickup
- Finely detailed (movable/non-functional) high-speed and crossbeam pantographs (as required)
- Accessory bag with optional matching parts
7.80 EUR*
Art.-no. Diverse_N-Bahn-Magazin-2026-4
Diverse
88-page German magazine for N-scale model railroaders
67.99 EUR
(RRP*)
29.99 EUR*
Art.-no. Faller_232185
Faller
A village farmhouse in the typical brown colors in the southern German style invites you to create many village scenes on the model railway layout. Large wooden gates, a wooden shed attached to the living area, an external wooden staircase and a long roof characterize this farmhouse in the village. Crosses for the outside area and other suitable accessories complete this interesting kit.
This kit contains: 116 individual parts in 6 colors, window film, 1 curtain mask and 1 assembly instructions. Use FALLER EXPERT plastic glue for crafting.
Dimensions: 95 x 78 x 68 mm
This kit contains: 116 individual parts in 6 colors, window film, 1 curtain mask and 1 assembly instructions. Use FALLER EXPERT plastic glue for crafting.
Dimensions: 95 x 78 x 68 mm
31.99 EUR
(RRP*)
17.99 EUR*
Art.-no. Faller_272127
Faller
Model of a historical, wrought-iron lantern. The filigree decorations give this lantern a special charm. This makes it particularly suitable for illuminating old towns, parks and historical scenes. The mast is made of metal and the height of the luminaire is variably adjustable. The single-flame lantern is equipped with long-life LED technology. Height: 65mm.
The product is ready for connection for 12 V direct current (DC). Use the »transformer«, item 180641, to operate the lamp.
The product is ready for connection for 12 V direct current (DC). Use the »transformer«, item 180641, to operate the lamp.
44.99 EUR
(RRP*)
24.99 EUR*
Art.-no. Faller_272129
Faller
Classic arc lamp with metal lattice pole. Particularly suitable for lighting sceneries close to railways, such as train stations, depots or track fields. The single-lamp lamp is equipped with durable LED technology. Height: 117mm. Light color: warm white. The product is ready for connection to 12 V direct current (DC). Use the transformer, Art. 180641, to operate the lamp.
17.99 EUR
(RRP*)
9.99 EUR*
Art.-no. Faller_272218
Faller
Model of a widely used post-top light with a flat lattice mast made of metal. Particularly suitable for lighting sceneries close to railways, such as train stations, depots or track fields. The two-lamp lamp is equipped with durable LED technology. The product is ready for connection to 12 V direct current (DC). To operate the light, use the »transformer«, item 180641. Height: 80 mm. Light color: warm white. Content: 1 piece.
10.49 EUR
(RRP*)
5.99 EUR*
Art.-no. Faller_272232
Faller
Trapezoidal lamp in a modern design. Particularly suitable for designing city, street and railway scenes. The mast is made of metal and the height of the lamp can be adjusted variably. The delicate two-bulb light is equipped with long-lasting LED technology. The product is ready for connection to 12 V direct voltage (DC). To operate the lamp, use the “transformer”, item 180641. Height: 60 mm. Light color: warm white. Contents: 1 piece.
19.99 EUR*
Art.-no. Noch_23102
Noch
Inhalt:
· Rohlinge für ca. 40 – 50 Büsche bzw. kleine Bäume (je nach Höhe)
· Laub hellgrün 25 g
· Laub mittelgrün 25 g
· DVD mit ausführlichen Bastel-Tipps
18.29 EUR*
Art.-no. Noch_34855
Noch
Wall made of hard foam
Steinmauer PROFI-plus series
39.6 x 7.4 cm
Steinmauer PROFI-plus series
39.6 x 7.4 cm
20.49 EUR*
Art.-no. Noch_34857
Noch
extra long retaining wall made of hard foam
Steinmauer PROFI-plus series
39.6 x 7.4 cm
Steinmauer PROFI-plus series
39.6 x 7.4 cm
20.49 EUR*
Art.-no. Noch_34859
Noch
The "Quarrystone Wall PROFI Plus" Series is a highlight for realistically designing walls and portals. The detailled surface structure and the three-dimentional design, as well as intricate details, such as wall copings, ledges or rain gutters, turn every wall into a real eye-catcher.
extra long,39.6?x?7.4?cm
extra long,39.6?x?7.4?cm
13.49 EUR*
Art.-no. Noch_35010
Noch
Police officers in green uniforms – order and security for your model landscape!
The NOCH "Police Officers in Green Uniforms" figures bring classic police scenes to your miniature world. The set includes six detailed 3D-printed figures in green uniforms, as well as a police dog. Whether conducting traffic stops, patrolling the streets, or working with a canine unit, these figures are versatile and create authentic scenes in your model landscape. With accessories such as high-visibility vests, batons, and radios, the set is perfect for town or village scenes, train stations, or public squares. A must-have for realistic and vibrant model building!
The NOCH "Police Officers in Green Uniforms" figures bring classic police scenes to your miniature world. The set includes six detailed 3D-printed figures in green uniforms, as well as a police dog. Whether conducting traffic stops, patrolling the streets, or working with a canine unit, these figures are versatile and create authentic scenes in your model landscape. With accessories such as high-visibility vests, batons, and radios, the set is perfect for town or village scenes, train stations, or public squares. A must-have for realistic and vibrant model building!
13.49 EUR*
Art.-no. Noch_35300
Noch
Here we go on holiday - colorful 3D printing!
3D Master Figures
The set contains six 3D printed plastic figures.
Traveling without luggage? That's rare! Our model figures also travel with suitcases and backpacks. Four figures carry a suitcase, one carries a backpack and another lady carries a small handbag.
The set is perfect for realistically decorating train stations on model railway layouts.
The NOCH 3D Master figures are 3D printed in color! With this fantastic technology, even the smallest details become visible. Whether checked shirts, striped blouses or color gradations and gradients, full-color 3D printing makes it possible.
3D Master Figures
The set contains six 3D printed plastic figures.
Traveling without luggage? That's rare! Our model figures also travel with suitcases and backpacks. Four figures carry a suitcase, one carries a backpack and another lady carries a small handbag.
The set is perfect for realistically decorating train stations on model railway layouts.
The NOCH 3D Master figures are 3D printed in color! With this fantastic technology, even the smallest details become visible. Whether checked shirts, striped blouses or color gradations and gradients, full-color 3D printing makes it possible.
13.49 EUR*
Art.-no. Noch_35837
Noch
Motorcyclists – Realistic 3D Master Figures from NOCH
Add dynamic touches to your model landscape with NOCH's "Motorcyclists" figures. This set includes a rider with a passenger and a sporty rider on a touring motorcycle. The detailed design of the figures and vehicles brings life and movement to your model roads. The figures are perfect for scenes on country roads, in the city, or on touring trips. Thanks to modern 3D printing technology and high-quality hand-painting, the miniatures are exceptionally realistic and a true highlight for model building enthusiasts!
Add dynamic touches to your model landscape with NOCH's "Motorcyclists" figures. This set includes a rider with a passenger and a sporty rider on a touring motorcycle. The detailed design of the figures and vehicles brings life and movement to your model roads. The figures are perfect for scenes on country roads, in the city, or on touring trips. Thanks to modern 3D printing technology and high-quality hand-painting, the miniatures are exceptionally realistic and a true highlight for model building enthusiasts!
79.99 EUR
(RRP*)
71.99 EUR*
Art.-no. Noch_60050
Noch
The NOCH Special Tool Set offers everything you need for precise work in model making. With 36 carefully selected tools, this set is the ideal basic equipment for model makers, hobbyists, and creative individuals. Whether cutting, filing, drilling, or gluing – you have everything you need at hand to professionally complete your projects.
Contents:
1x cutting mat 220 x 150 mm, 2 mm thick; 1x metal ruler, 150 mm
1x Side cutters for plastic parts
3x files
1x double-sided modeling tool
1x fine scalpel
6x scalpel blades
3x Flexi-sanding pads 90 x 19 mm, 6 mm thick
1x tool handle
1x scalpel blade for tool handle
1x fine saw blade for tool handle
1x hand drill
5x drill bits (1.0, 1.2, 1.4, 1.5, and 1.8 mm)
1x straight tweezers
1x curved tweezers
3 resealable bottles, 10 ml
3x flat brushes, 6 mm
1x pencil
1x tool bag with zipper
With this comprehensive set you are perfectly equipped to work on kits, create dioramas or carry out repairs on your model railway.
Your advantages at a glance:
- 36 high-quality tools in one set
- Ideal for model railways, dioramas and craft projects
- Precise execution for professional results
- Practically combined basic equipment for every model maker and hobbyist
- High quality for long-lasting use
Contents:
1x cutting mat 220 x 150 mm, 2 mm thick; 1x metal ruler, 150 mm
1x Side cutters for plastic parts
3x files
1x double-sided modeling tool
1x fine scalpel
6x scalpel blades
3x Flexi-sanding pads 90 x 19 mm, 6 mm thick
1x tool handle
1x scalpel blade for tool handle
1x fine saw blade for tool handle
1x hand drill
5x drill bits (1.0, 1.2, 1.4, 1.5, and 1.8 mm)
1x straight tweezers
1x curved tweezers
3 resealable bottles, 10 ml
3x flat brushes, 6 mm
1x pencil
1x tool bag with zipper
With this comprehensive set you are perfectly equipped to work on kits, create dioramas or carry out repairs on your model railway.
Your advantages at a glance:
- 36 high-quality tools in one set
- Ideal for model railways, dioramas and craft projects
- Precise execution for professional results
- Practically combined basic equipment for every model maker and hobbyist
- High quality for long-lasting use
49.99 EUR*
Art.-no. Noch_60131
Noch
Grass Master Workstation – Order and efficiency in grassing
With the NOCH Gras-Master 4.0 Work-Station, you'll always maintain an overview during model making. This practical workstation is specially designed for use with the Gras-Master 4.0 and Gras-Master 4.0 PROFI, ensuring order and efficient work during electrostatic grassing.
The station is made of sturdy wood and is precisely tailored to the Grass-Master. It offers a secure mount for the device as well as structured storage areas for sieve inserts, glue, tools, and various grass fibers. Thanks to the clear layout, everything is within easy reach while you work, allowing you to fully concentrate on the creative design of your model landscape.
Thanks to its robust construction using MDF panels, the Grass Master and its accessories are always securely stored and easily accessible. At the same time, the workstation is compact enough to fit in any workshop. It thus combines practical functionality with a space-saving design.
Your advantages at a glance:
Perfect mount for the NOCH Gras-Master 4.0 and Gras-Master 4.0 PROFI
Clearly arranged storage compartments for sieves, glue, grass fibers and tools
Sturdy MDF panels for safe storage of the products.
Compact and space-saving
Increases order, efficiency and comfort when turfing.
With the NOCH Gras-Master 4.0 Work-Station you create order, save time and experience even more pleasant working – an indispensable accessory for all those who want to professionally and intricately green their model landscapes.
With the NOCH Gras-Master 4.0 Work-Station, you'll always maintain an overview during model making. This practical workstation is specially designed for use with the Gras-Master 4.0 and Gras-Master 4.0 PROFI, ensuring order and efficient work during electrostatic grassing.
The station is made of sturdy wood and is precisely tailored to the Grass-Master. It offers a secure mount for the device as well as structured storage areas for sieve inserts, glue, tools, and various grass fibers. Thanks to the clear layout, everything is within easy reach while you work, allowing you to fully concentrate on the creative design of your model landscape.
Thanks to its robust construction using MDF panels, the Grass Master and its accessories are always securely stored and easily accessible. At the same time, the workstation is compact enough to fit in any workshop. It thus combines practical functionality with a space-saving design.
Your advantages at a glance:
Perfect mount for the NOCH Gras-Master 4.0 and Gras-Master 4.0 PROFI
Clearly arranged storage compartments for sieves, glue, grass fibers and tools
Sturdy MDF panels for safe storage of the products.
Compact and space-saving
Increases order, efficiency and comfort when turfing.
With the NOCH Gras-Master 4.0 Work-Station you create order, save time and experience even more pleasant working – an indispensable accessory for all those who want to professionally and intricately green their model landscapes.
13.99 EUR*
Art.-no. Wiking_097404
Wiking
Body, chassis, and front loader with bucket in olive gray. Front headlights silvered. Rims olive gray. Taillights carmine red. Front loader with "Hanomag" lettering and superstructure with "Hanomag" and "B11" lettering.
Year of manufacture (original manufacturer): 1964-72
Year of manufacture (original manufacturer): 1964-72
14.99 EUR*
Art.-no. Juweela_21606
Juweela
Jewel Diorama 10-piece Mix Juweelas
Sometimes, as a model maker, I don't know which material is right for my diorama.
Or a project might not require much, but it might require a lot of different things.
Or I might want to try something out first.
Or I love variety. Or I want to give a gift that is always needed.
For all these purposes, we have our JUWEELINIS assortment boxes with a product mix that always offers something to do.
Because there is only one diorama that suits you - yours!
Contents (10 different articles):
- Brick red dark
- Junk cars
- Concrete slabs with laying eyelet
- Rusty scrap metal
- hard coal
- old, rusty barrels
- Used tires
- Lignite
- Wheel rollers rusty
- Construction debris/rubble grey/brick red
- Material: Ceramic
All items are also available individually.
Sometimes, as a model maker, I don't know which material is right for my diorama.
Or a project might not require much, but it might require a lot of different things.
Or I might want to try something out first.
Or I love variety. Or I want to give a gift that is always needed.
For all these purposes, we have our JUWEELINIS assortment boxes with a product mix that always offers something to do.
Because there is only one diorama that suits you - yours!
Contents (10 different articles):
- Brick red dark
- Junk cars
- Concrete slabs with laying eyelet
- Rusty scrap metal
- hard coal
- old, rusty barrels
- Used tires
- Lignite
- Wheel rollers rusty
- Construction debris/rubble grey/brick red
- Material: Ceramic
All items are also available individually.
Yours sincerely
Daniel Mrugalski
DM-Toys