N-Scale 03/2026: MU Signal Cantilevers, Micromotor, Fleischmann

39.99 EUR^*

Art.-no. MU_N-B00056

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras II-IV in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED entry signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

39.99 EUR^*

Art.-no. MU_N-B00061

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras II-IV in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED exit signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

79.99 EUR^*

Art.-no. MU_N-B00062

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras II-V in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 4 3-aspect LED entry signals, which can be mounted either for 33mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

79.99 EUR^*

Art.-no. MU_N-B00063

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras II-V in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 4 3-aspect LED exit signals, which can be mounted either for 33mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

39.99 EUR^*

Art.-no. MU_N-B00064

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras IV-VI in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED entry signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

39.99 EUR^*

Art.-no. MU_N-B00065

Modellbahn Union

This model resembles the cantilever signal bridge used in the eras IV-VI in Germany. As of era IV, new signal bridges where constructed of full plated steel. Cantilever signal bridges were used, when the minimum distance between track centre and signal could not be achieved. The model can be fitted with 2 signals per side, and is delivered with 2 3-aspect LED exit signals, which can be mounted either for 30mm or 34 mm track distance. The signals can be connected to analogue or digital controllers.

This kit is for experienced modellers.

32.99 EUR^*

Art.-no. MicromotorEU_NA057C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Arnold, Minitrain, Rivarossi ET 165, ET 182, BR 275, BR 475

Replaces Arnold Motor 0193-2-020

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816D
- 1x motor mount S038 Mabuchi 010
- 2x shaft adapter A7 10->15 15 mm
- 1x hose coupling 1 mm
- 2x flywheel F005
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0189-0193, Mintrain 5525001-5525004

32.99 EUR^*

Art.-no. MicromotorEU_NA058G

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Arnold / Revell GP 7, GP 9, GP 30

Replaces Arnold Motor 0271-007

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 1015D
- 2x shaft adapter A10 10->15 7 mm
- 2x shaft adapter A32 15->20 4.5 mm
- 1x hose coupling 2 mm
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Arnold 0271, 0271C, 0271F, 0271S, 0272, 0272P, 0272S, 0273, 0273B, 0273G, 0273S, 0273U, 5030-5031, 5042-5056
- Revell 2304-2305

32.99 EUR^*

Art.-no. MicromotorEU_NA059C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Arnold BR 42

Replaces Arnold Motor HN2333/01

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816S
- 1x shaft adapter A9 10->15 8 mm
- 1x snail W0.3-4-5
- 1x flywheel F006

Replacement motor / conversion kit suitable for the following locomotives:
- Arnold HN2333-HN2335S, HN2374-HN2376, HN2405, HN2429, HN2429S, HN2485-HN2487S

32.99 EUR^*

Art.-no. MicromotorEU_NA060C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Arnold model ETR 610 (SBB, FS), Cisalpino, RENFE S 114, SBB RABe 503

Replaces Arnold engine HN2470/05

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816DH
- 1x Motor mount S026 Startrain v1
- 2x shaft adapter A1 10->15 12 mm
- 2x Cardan coupling SP009
- 2x flywheel F005
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Arnold HN2470-HN2475S, HN2567-HN2567S, HN2577-HN2578S, HN2699-HN2700S

32.99 EUR^*

Art.-no. MicromotorEU_NDA002

Micromotor.EU

Conversion kit with high-quality bell-shaped armature motor, compatible with Dapol Class 57xx Pannier.

Replaces the following motors: Motor 112469, 113208, 2D-006-MWFW, Supercreep motor with double shafts but no flywheels

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0812D
- 1x motor mount S083 Dapol Supercreep
- 2x shaft adapter A8 10->15 4.5 mm
- 2x strands

Replacement motor / conversion kit suitable for the following items:
Dapol ND084A, ND084B, ND084C, ND084D, ND084E, ND084F, ND084G, ND084H, ND084J, ND084P, ND084Q, ND084Y, ND084Z, 2D-018-XXX, ND000BR, ND000RT, ND005, ND006, ND007, ND008, ND011A, ND011B, ND012A, ND012B, ND021A, ND021B, ND022A, ND022B, ND036A, ND036B, ND036C, ND036D, ND070A, ND070B, ND071, ND072, NSPEC3, SBD1, SBDN2, DAGM230, DAGM231, DAGM232, DAGM233, DAGM234, DAGM235, GM2210201-GM2210210, CM003, CM004, ND081A, ND082A, ND083A, ND096A, ND097A, ND098A, ND112A, ND112B, ND112C, NDSPEC1, 2D-021-XXX, GM2210901

32.99 EUR^*

Art.-no. MicromotorEU_NF067C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Fleischmann models BR 103, E 03

Replaces engine no. 50737801

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S008 Flm 16.4 16.4 10 MU v1
- 1x shaft adapter A2 10->15 20 mm
- 1x shaft adapter A3 10->15 23 mm
- 1x flywheel F005
- 2x snail W0.4-4-5
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Flm 737801-737803, 737811-737812, 737871-737873, 737882, 737891, 737902, 737972, 781401, 781471, 781504-781506, 781574-781576, 7560006, 7560034, 7570006, 7570034

32.99 EUR^*

Art.-no. MicromotorEU_NF068G

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Fleischmann BR 01 models 2023

Replaces engine no. 50714505

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816D
- 1x Motor mount S049 N030 MU v1
- 2x shaft adapter A9 10->15 8 mm
- 2x snail W0.3-4-5
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Film No. 7145XX

32.99 EUR^*

Art.-no. MicromotorEU_NH018C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Hobbytrain models ETA 176 and ETA 517 Limburger Zigarre.

Replaces engine H2690-9

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816D
- 1x engine mount S026 Startrain MU v1
- 1x shaft adapter A21 10->15 14 mm
- 1x snail W0.3-4-5
- 1x flywheel F009
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Hobbytrain H2690-H2695

32.99 EUR^*

Art.-no. MicromotorEU_NH019C

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Hobbytrain RBe 2/4, RCe 2/4, Red Arrow models

Replaces engine H2600-4R

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0816D
- 1x Motor mount S049 N030 MU v1
- 1x shaft adapter A2 10->15 20 mm
- 1x snail W0.3-4-5
- 1x flywheel F004
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Hobbytrain H2640-H2644, H2646-H2647

32.99 EUR^*

Art.-no. MicromotorEU_NL004

Micromotor.EU

Conversion kit with high-quality coreless motor, compatible with Liliput BR 110 and E10 models.

Replaces engine L62520-980-1

The locomotive is not included. Installation instructions can be found under Downloads.

Scope of delivery:
- 1x Motor 0812D
- 2x motor holder S023 Liliput Flirt MU v1
- 2x strands

Replacement motor / conversion kit suitable for the following locomotives:
- Liliput L162520-L162523

199.90 EUR (RRP*)

179.91 EUR^*

Art.-no. Fleischmann_7160025

Fleischmann

Steam locomotive series 232 TC of the French State Railways.

- Version with rounded roof
- Die-cast metal chassis

The French National Railway (SNCF) acquired 27 examples of the T 18 class locomotives from the Imperial Railways in Alsace-Lorraine. These locomotives had been built by the Vulcan Works between 1915 and 1918. They were based in Strasbourg, Haguenau, Sélestat, Colmar, and Mulhouse. Due to their respectable top speed of 100 km/h, large water reservoir, and much-praised smooth running, they were primarily used for fast suburban service. The last locomotive, number 232 TC, was retired from regular SNCF service in 1966.

239.90 EUR (RRP*)

215.91 EUR^*

Art.-no. Fleischmann_7560074

Fleischmann

Electric locomotive 193 459-5 of SBB Cargo International.

- Baptismal name “Bundestag Berlin”
- With detailed roof design
- Cross-border use in freight transport
- Switchable headlights/taillights with DIP switch
- In cooperation with Railcolor Design

In April 2025, the last two XLoad Vectron locomotives, numbers 193 452 and 459, which had not yet been wrapped, were fitted with their special livery. This brings the number of specially wrapped XLoad locomotives, which deviate from the standard design, to four. Following the Netherlands and Italy, Germany and Switzerland have now also received their own special "Piercer" locomotives from SBB Cargo International. Unlike the silver Italian "Piercer," locomotive 193 459 has the same appearance on both sides and features various motifs familiar to German audiences.

339.90 EUR (RRP*)

305.91 EUR^*

Art.-no. Fleischmann_7570074

Fleischmann

Electric locomotive 193 459-5 of SBB Cargo International.

- Baptismal name “Bundestag Berlin”
- With detailed roof design
- Cross-border use in freight transport
- In digital operation with switchable high beam and switchable headlights/taillights
- In cooperation with Railcolor Design

In April 2025, the last two XLoad Vectron locomotives, numbers 193 452 and 459, which had not yet been wrapped, were fitted with their special livery. This brings the number of specially wrapped XLoad locomotives, which deviate from the standard design, to four. Following the Netherlands and Italy, Germany and Switzerland have now also received their own special "Piercer" locomotives from SBB Cargo International. Unlike the silver Italian "Piercer," locomotive 193 459 has the same appearance on both sides and features various motifs familiar to German audiences.

8.99 EUR^*

Art.-no. Fleischmann_9119

Fleischmann

24.20 EUR^*

Art.-no. Fleischmann_144448

Fleischmann

Replacement engine, brand new from the factory

99.99 EUR^*

Art.-no. Microace_A8168

Microace

equipped with:
- Engine
- Flywheel
- Light change
- Standard N-couplings